Used Copper Wire Drawing for sale (5,231)

Condition: ready for operation (used), Used and fully functional RMG 89 wire drawing machine: Max. diameter: 14 mm. Capstan diameter: 900 mm. Drawing force: 3,850 kg. Motor: 18.75 kW Speed: 21.25 m/min. Iodozx Rikjpfx Ap Detn Weight: 2,000 kg.

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm Itjdpfx Apewi Tide Djn speed -meters/sek: 15 m Location: Europe

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, TEUREMA EHS-110 WIRE DRAWING LINE Year of manufacture: 1999 Maximum speed: 10 m/s Total installed power: 230 kW TEUREMA EHS-110 wire drawing line with robust construction, equipped with a Tecno Impianti drawing bench and prepared for industrial use. The machine has undergone a complete electrical modernization, including a new main electrical panel, Siemens S7-1500 PLC, Siemens 1200 HMI screen, 100% new wiring, and new push-button stations, which significantly improves the reliability, maintenance, and operability of the unit. LINE COMPOSITION Coil stands - 2 tilting winders - Maximum capacity per winder: 3,000 kg Vertical winding tower - 6-meter tower - Lifting and lowering carriage with a hoist Mechanical decaling unit Soaping unit - Motor: 1.5 kW - Speed: 1,500 rpm TECNO IMPIANTI DRAWING BENCH - Number of steps: 2 - Two-ring coil: - 1st ring: Ø 610 mm - 2nd ring: Ø 760 mm - 3-speed gearbox: - 3.90 m/s - 7.20 m/s - 10.00 m/s Isdpfx Apezycaks Dotn - Power: 160 kW - Frequency: 50 Hz Horizontal coiler - Horizontal drive - Maximum coil capacity: 3,000 kg - 2-speed gearbox: - 7.3 m/s - 10.0 m/s - Maximum coil diameter: Ø 1,200 mm - Core diameter: Ø 600 mm - Usable width: 900 mm - Power: 45 kW TECHNICAL DATA - Inlet diameter: 5.5 to 14 mm - Outlet diameter: 4 to 12 mm - Number of blocks: 1 vertical - Maximum line speed: 10 m/s - 2 CL30 A 33 Eurolls cassettes - Rollers: Ø 150 x Ø 90 x 15/20 mm - Total machine power: 230 kW - Frequency: 50/60 Hz ELECTRICAL AND AUTOMATION UPGRADE - Completely new main electrical panel - Siemens S7-1500 PLC - Siemens HMI 1200 screen - 100% new wiring - New push-button stations - New programming AVAILABLE SERVICES Possibility of supply with: - installation - assembly - commissioning - technical assistance - adaptation according to customer needs

Condition: good (used), Year of construction: 2000, For wire diameters from 1 to 5.5 mm Drawing drum diameter: 400 mm Drawing speed max. 25 m/min For screw manufacturing/cold forming Itodpfx Aey N Df Nep Don

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Iedpfx Apjwi S Ixj Dotn Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Isdpjr Nfvmjfx Ap Djtn Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Itodpfx Ajt Ixkzjp Djn Maximum Inlet Wire's Diameter: 30 mm

Condition: refurbished (used), Year of construction: 1999, In Line WIRE DRAWERS RMG 45 Used and revised to new. Operational. Manufacturer: RMG Type: 45 Max. Ø (mm.): 8 Capstan Ø (mm.): 500 Iedpfx Apsyrdzns Dotn Max. Speed (m/min.): 36 Year: 1999 Available at H.B.R. srl - Italy Cheaper Price

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Itjdpfx Aez Adnusp Den

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1154, total height: 2,040 mm, total length: 2,200 mm, total width: 1,770 mm, type of input current: three-phase, table width: 400 mm, overall weight: 3,100 kg, table length: 600 mm, table height: 220 mm, empty load weight: 2,800 kg, table load: 450 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, The Sodick AQ325L wire EDM machine was manufactured in 2002 by the Japanese company Sodic Co., Ltd. This is a precision CNC machine designed for cutting various shapes in conductive materials using the EDM (Wire Cut) method. This model combines a compact design with high machining accuracy, making it ideal for both single and serial production, especially for manufacturing parts with complex geometries. The machine offers a working area capable of machining parts with dimensions up to 350 × 250 × 220 mm and a weight of up to 450 kg. The stable construction and precise axis guidance ensure high repeatability and cutting accuracy, even with demanding materials and complex contours. Additional U and V axes allow for tapered cuts up to 20°, which significantly expands the technological capabilities of the machine. The Sodick AQ325L EDM machine operates with wire diameters ranging from 0.15 to 0.30 mm, offering adjustable wire tension over a wide range and a high wire feed rate, resulting in efficient and stable machining. The immersion system enables operation in a dielectric fluid, increasing the surface quality and dimensional accuracy of the machined parts. The Sodic AQ 325 L wire EDM machine is equipped with an efficient dielectric system with a capacity of 530 liters, featuring a filtration system based on replaceable paper filters and a deionizer, which guarantees the maintenance of appropriate operating parameters and a long service life for the components. The ergonomic table height and well-thought-out design facilitate operation and the preparation of parts for machining. Itjdpfoz Az Uvsx Ap Don Thanks to its robust construction, high weight, and proven technology from the manufacturer Sodick, the AQ325L model is a reliable solution for tool shops, production facilities, and companies involved in precision metalworking. Specifications of the Sodic AQ 325L Wire EDM Machine - Table travel (X / Y axis): 350 × 250 mm - Z-axis travel: 220 mm - Auxiliary table travel (U / V axis): 80 × 80 mm - Working table size: 600 × 400 mm - Working tank dimensions: 895 × 650 mm - Maximum workpiece height: 220 mm - Maximum workpiece height during immersion machining: 200 mm - Maximum workpiece weight: 450 kg - Maximum workpiece weight during immersion machining: 300 kg - Distance from the floor to the top surface of the table: 965 mm - Taper / cutting angle: 20° / 80 mm - Wire tension: 300–2300 g - Max. wire feed rate: 250 mm/s - Wire diameter: 0.15–0.30 mm - Max. wire spool weight: 6 kg - Machine dimensions (W × D × H): 1650 × 1900 × 2040 mm - Overall machine dimensions: 2250 × 2200 mm - Machine weight: 2800 kg Dielectric tank - External dimensions (W × D × H): 550 × 2200 × 1770 mm - Weight of empty tank: 230 kg - Capacity: 530 l - Deionizer: 10 l Filtration system: 2 replaceable paper filters - Layout / arrangement as shown in the drawing - Total length of the system: 3000 mm - Total width of the system: 3500 mm - Power supply: 3-phase AC 220V (50/60Hz)

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 Ijdpfxju Itk Rs Ap Dstn 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Year of construction: 2026, condition: new, ‼️NEW FEATURE – NOW WITH SIEMENS TOUCH SCREEN‼️ For improved operation and control! Leasing is also available! Always with linear monthly payments and no increased final installment! Term 36 months. Rate factor 3.0694% Term 48 months. Rate factor 2.3697% Term 60 months. Rate factor 1.9456% IMPORTANT‼️ Currently, there are machines from China being offered on various platforms. Most CE certificates are counterfeit, and there is no EU conformity. The electrical systems are also usually not compliant with German regulations. Several clients have contacted us, asking how it’s possible to obtain copper from these machines, as they only get shredded cable mixtures. Based on our own tests two years ago, we can confirm that these machines do not produce clean copper. Such machines are not permitted for use in Germany! Itedpfxjp E Efce Ap Djn German quality, CE certified with EU conformity, and available for live demonstration. We recommend buying locally here in Germany: German warranties, German laws, fixed prices, and German-speaking support in case of problems – all only with machines purchased from us. You are welcome to arrange a site visit to see our quality in person. Live demonstrations available! For all recycling needs, we have shredders and other recycling machinery in stock in Heilbronn! Here is our new, unique machine – a world exclusive, only available from us in Heilbronn. Water-cooled system. Very efficient, clean copper granulate: 99.7% purity. We are a German company operating under German law. Excellent quality with warranty and service. Our German-speaking skilled workers, all certified, can assist you at any time. We have our own trucks, service vans, and offer prompt support and advice. See for yourself on site – don’t just decide based on pictures or videos. We granulate ourselves and can demonstrate this live. S300 with water cooling and fan – developed and assembled in Germany by us. With our equipment, you can also separate radiator copper: Input: ➡️ Copper-aluminum radiators Output: ➡️ Separated copper and aluminum. Any iron parts and screws are separated via magnetic belt as their own fraction (pre-shredder required). Since we use our own machines for copper recycling, our systems are continuously modernized, optimized for long service life, and constantly improved. Maintenance, spare parts, modifications, and upgrades are provided by our trained staff! From stranded wire, extension cables, automotive cables, telephone cables, NYM cables – recycle it all with our machines! Granulation Plant S300 ➡️ For cables from 0.1–40mm ➡️ Up to approx. 250 kg/h input – meaning, with 50% copper content in the cable, you can recover 5kg of 99.7% pure copper granulate from 10kg of input, which can be sold at premium prices. ➡️ Total connected load: 24 kW ➡️ Including separation tables ➡️ 380-volt connection ➡️ UVV compliant, implemented by a German company ➡️ Conveyor belts included ➡️ Magnetic belt included (for steel separation) ➡️ Transport can be organized From €24,999.00 net +19% VAT €4,748.81 Gross €29,748.81 Subject to errors and prior sale.

Condition: used, Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: MV2400R, workpiece weight (max.): 1,500 kg, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 305 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, type of input current: three-phase, table width: 640 mm, overall weight: 3,850 kg, table length: 840 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 310 mm, input voltage: 220 V, input frequency: 50 Hz, input current: 35 A, Equipment: cooling unit, documentation/manual, Technical Specifications – Mitsubishi Electric MV2400R Control Unit Control System Manufacturer: Mitsubishi Axis Strokes Number of axes: 3 Technical Features Itjdpsz Sp Udsfx Ap Don Maximum taper angle: 15° / 260 mm Required compressed air: 0.5 MPa, 75 l/min PC technology with a 15-inch color LCD touchscreen and mouse Electronic hand-held control unit Support for 2D/3D CAM processing Graphical verification of machining Machine Capacity Max. taper angle 15° / 260 mm Machine Description This 3-axis wire EDM machine, Mitsubishi Electric MV2400R, was manufactured in 2013. It is equipped with a PC control unit featuring a 15-inch LCD touchscreen and supports 2D/3D CAM and graphical verification of machining. Condition The machine is still connected to the power supply and energized.

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool Ijdpfszgu Igsx Ap Detn option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: used, Year of construction: 2003, operating hours: 81,060 h, functionality: fully functional, machine/vehicle number: 921083, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, table height: 1,000 mm, empty load weight: 2,450 kg, table load: 750 kg, input voltage: 400 V, tank capacity: 760 l, distance table to quill: 220 mm, input frequency: 50 Hz, input current: 18 A, Equipment: documentation/manual, The table has a hard chrome finish. Itsdpfxoz Spd Ij Ap Den In addition, we also sell the matching EasyChange XT 4-position workpiece changer from Erowa; see the nameplate for the model. Pick-up only.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, overall weight: 9,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Dieffenbacher PO100 Pressing force 1000 kN / 100 tons Approach speed max. 300 mm/s Working speed max. 14 mm/s Connected power 30 kVA Stroke max. 500 mm Dwell time 95 ms Safety clearance 190 mm Tool height min. 200 mm, max. 700 mm Tool weight max. 1000 kg Tool length max. 1000 mm Tool width max. 700 mm Weight of upper part max. 500 kg Itedpfx Apez Rzkhe Den Other: Light barriers, Siemens control system In top condition!

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: RM2019003, Rolling mill for flattening wire. Manufacturer: Nantong Geron Intelligent Equipment R&D Co., Ltd. Brand: GEHI Model: GZYH19004 Rolling Mill Year of manufacture: 08/2019 Serial number: RM2019003 TECHNICAL SPECIFICATIONS Supply voltage: 380 V Frequency: 50 Hz Installed power: 200 kW Working speed: 0 – 150 m/min Feed material (wire): Ø ≤ 13 mm Machine dimensions: 18,000 × 3,000 × 2,000 mm Approximate weight: 10,000 kg DESCRIPTION GEHI GZYH19004 industrial rolling mill, designed for processing wire and round materials with a diameter of up to 13 mm. High-capacity industrial machine, equipped with an installed power of 200 kW and a working speed of up to 150 m/min, suitable for industrial applications and high-volume production lines. Heavy-duty construction, with a total length of approximately 18 meters, designed for continuous industrial operation and high-speed processing. MAIN DATA Model: GZYH19004 Year: 2019 Power: 200 kW Itsdpfxoz Infre Ap Don Speed: up to 150 m/min Material diameter: up to Ø13 mm Weight: approx. 10 tons Dimensions: 18 × 3 × 2 m

Condition: good (used), Specification Value video avaible on whatsapp X-Axis Travel 1,500 mm Y-Axis Travel 990.6 mm Z-Axis Travel 1,200 mm Pallet Size 800 × 800 mm Itedez S Aayopfx Ap Don Maximum Pallet Load Approx. 3,000 kg Spindle Speed 4,000 rpm Spindle Taper CAT 50 Tool Magazine Capacity 60 Tools Spindle Motor 24 HP

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, wire diameter (max.): 8 mm, WAFIOS BMU 40 CNC 3D Wire Bending Machine | 2015 | Decoiler | Tooling | Complete Production Cell Complete CNC Wire Bending and Forming Cell WAFIOS BMU 40 CNC wire bending machine | Wire decoiler / pay-off system | Tooling sets | Conveyor and collection system | Safety enclosure | CNC control For sale: a complete used WAFIOS BMU 40 CNC wire bending and forming machine with peripheral equipment and extensive tooling. The machine is designed for automatic production of formed wire components and is offered as a complete production cell. The machine is currently installed together with the wire feeding system, decoiler, finished-part handling equipment, safety guarding and dedicated tooling. The system consists of: • WAFIOS BMU 40 CNC 3D wire bending machine • CNC control unit with operator panel • Handheld operator control • Wire feeding and straightening section • Wire decoiler / pay-off unit • Automatic wire forming and bending section • Finished-part conveyor / collection system • Tooling and forming accessories • Tool cabinet with dedicated tooling • Additional machine tools and accessories • Safety fencing with access gates • Electrical and control equipment Technical Specifications Iedpfx Apjz R Rpbs Dotn • Manufacturer: WAFIOS AG, Germany • Model: BMU 40 • Machine type: CNC wire bending / forming machine • Number of CNC axes: 3 • Wire diameter range: 3 - 8 mm • Year of manufacture: 2015 • Machine No.: 2 7656 018 • Plan No.: 7656 2 9000 18 • Power supply: 3-phase, 400 V • Frequency: 50 Hz • Rated current: 13 A • Control voltage: 24 V DC / 230 V AC • CE marked Equipment Included • Wire decoiler / pay-off system • Wire feeding and straightening equipment • CNC operator station with screens and keyboard • Handheld control unit • Dedicated forming tools, dies, guides and accessories as shown in the photos • Tool storage cabinet • Finished-part conveyor / collection table • Product collection racks • Safety guarding around the complete production cell • Additional maintenance and setup tools as shown in the photos Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell with peripheral equipment and tooling. The equipment is offered together with the accessories and tooling shown in the photos. Additional Information • Complete production cell available • Extensive tooling and accessories included as shown in the photos • Wire decoiler included • Finished-part handling / collection system included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility Location Koszalin, Poland

Condition: excellent (used), Year of construction: 2011, operating hours: 6,800 h, functionality: fully functional, machine/vehicle number: 0339, travel distance X-axis: 400 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 250 mm, total height: 2,220 mm, total length: 2,395 mm, total width: 2,240 mm, wire diameter (max.): 0.3 mm, type of input current: three-phase, table width: 636 mm, overall weight: 3,950 kg, table length: 473 mm, table height: 995 mm, empty load weight: 3,950 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 38 A, Equipment: cooling unit, documentation/manual, Good morning, Itjdpfx Ajzzwrkjp Djn For sale is a Sodick AG400L LN2W wire EDM machine. The machine is in perfect working order and was used for our own tooling production. It has been maintained in excellent condition and, despite its age, has only 6,800 operating hours.

Condition: used, Year of construction: 2014, operating hours: 21,476 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, feed length X-axis: 750 mm, feed length Y-axis: 500 mm, feed length Z-axis: 510 mm, We offer this used AGIE Charmilles CUT 400 SP wire erosion machine, manufactured in 2014. Type: CUT 400 SP Serial number: 001.018 Year of manufacture: 2014 Technical data: Travel ranges (X/Y/Z): 750 x 500 x 510 mm Itedez A R H Uopfx Ap Djn High-precision machining with excellent surface quality Automatic wire threading system (AWT) Modern CNC control with intuitive operation Stable machine construction for maximum accuracy Year of manufacture: 2014 Condition & Equipment: Regularly maintained Fully functional and ready for use Inspection and test run possible upon agreement Special features: Due to the large travel ranges, the machine is particularly suitable for larger workpieces and versatile applications in single-piece and series production. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1988, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 270 mm, wire diameter (max.): 0.3 mm, table width: 450 mm, overall weight: 2,300 kg, table length: 600 mm, table height: 300 mm, empty load weight: 2,300 kg, Two machines for the price of one. One machine is fully operational and in good condition for its age, equipped with a collecting system (sliding slats), and the other can be made operational again with minimal effort, but the new owner can also use it for spare parts (all electrical boards are intact; the pump system and wiring system require repair). Isdpfxozcww Rj Ap Detn The Matra Fanuc Tape Cut W2 is a classic and extremely reliable CNC wire EDM machine manufactured in 1988. This machine combines the cutting-edge technology of the Japanese Fanuc control system with the precision engineering of the German Matra machine tool manufacturer. The machines can also be purchased separately upon request. Machine requiring repair: €1500; Operational machine: €4500.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1320, For sale: SODICK CNC wire-cut EDM machine - Model: AQ325L LN 1W - Year: 2002 - Serial No.: 1320 The machine has been regularly maintained by BTS COMPANY d.o.o. and CELADA d.o.o. It was used for machining workpieces weighing up to 5 kg and for various toolmaking applications. Thanks to its precision, it operates with the accuracy of a measuring machine. It is connected to the power supply and ready for operation. Iodpfx Apoz Iywas Djtn

Condition: good (used), Year of construction: 2010, For sale CNC 5-Axis Drilling / Sinker EDM Machine – OCEAN Technologies OCT-90120CA (2010) 📝 DESCRIPTION For sale: High-precision 5-axis CNC drilling / sinker EDM machine from OCEAN Technologies Co., Ltd., model OCT-90120CA. Ijdpfjzrfpxjx Ap Djtn This is a very large-capacity industrial machine, ideal for quickly drilling deep holes and machining complex cavities in the mold making, aerospace, and precision engineering industries. ⚙️ FEATURES AND TECHNICAL CAPABILITIES 📐 Travels and Machining Capabilities (5 Axes) X-axis travel: 900 mm Y-axis travel: 1,200 mm Z-axis travel (Vertical axis): 1,000 mm W-axis travel (Head guide): 350 mm Rotary axis / Dividing head (C-axis): Integrated rotary table for multi-angle positioning and machining without re-fixturing the workpiece. 🖥️ Numerical Control & System Operating system: Dedicated Windows XP Embedded. Interface: Ergonomic control panel with color screen, full industrial keyboard, speed potentiometers, and manual axis control buttons. ⚡ Electrical Specifications (Nameplate) Voltage: 400 V AC / 3 Phases / 50-60 Hz Capacity / Power: 35 KVA Overload current: 86 A Compliance: CE marking 🛠️ EQUIPMENT & INCLUDED ACCESSORIES Precision rotary table / chuck with grooves and fixing flanges. Complete filtration system and auxiliary chiller unit for dielectric fluid (RBSystem / Spracflo). Enclosed booth and protective housing with sliding doors. Adjustable control station and manual remote control. 📊 CONDITION & HISTORY Year of manufacture: March 2010 Serial number: DR06461209 Overall condition: Good working condition, machine is clean and maintained in a controlled industrial environment. Maintenance: Regular maintenance performed.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Total weight without dielectric fluid: 2525 kg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. Itsdpfxsz Uwf Ae Ap Dsn We can also perform a test cut or an on-site inspection under power beforehand. We can also handle commissioning and training. We offer the following options: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin