Used Wiring Diagram for sale (3,264)

Condition: reconditioned (used), Year of construction: 2006, operating hours: 3,422 h, functionality: fully functional, machine/vehicle number: 214, workpiece weight (max.): 400 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! The machine was overhauled in 2025! The corresponding invoice is included. TECHNICAL DETAILS Maximum workpiece weight: 400 kg Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 430 mm Maximum wire diameter: 0.3 mm Table load: 400 kg Maximum workpiece height: 420 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 17 A Voltage: 3 x 400 V Power: 12.1 kVA Rated current: 17.5 A Short-circuit current: 10 kA Pjdpsy Ed E Iefx Amijpr Total weight: 2,650 kg Operating hours: 17,800 h EDM hours: 3,422 h EQUIPMENT Wire alignment device

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 07D1M931, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, wire diameter (min.): 0.1 mm, TECHNICAL DETAILS Travel range X-axis: 400 mm Travel range Y-axis: 300 mm Travel range Z-axis: 220 mm Travel range U/V-axis: 120 mm Ppsdpfxsy Emxqs Amier Cutting angle at 87 mm: ±30° Cutting angle at 200 mm: ±15° Wire diameter: 0.1-0.3 mm Max. workpiece dimensions: 810 mm x 700 mm x 200 mm MACHINE DETAILS Machine weight: 2,700 kg

Condition: good (used), 1 used electric wire rope hoist Manufacturer: Habegger (Switzerland) Model: Hit Trac 64 Technical Specifications HIT-TRAC 64 E Rated force (pulling, lifting, lowering) 6,400 kg Overload protection via thermoelement Rope speed max. 2.5 m/min Rope length unlimited Weight incl. motor 240 kg Rope diameter 20 mm Effective rope breaking load 300 kN Podpfx Amey Hftcjispr 3-phase AC drive motor 50 Hz / 400 V, 6.8A Power output 3 kW Duty cycle 30%

Condition: used, Year of construction: 2008, GF Agie Charmilles AC Progress V4 CNC Wire Eroder with GF Agie Charmilles CNC Control & Pendant, 1200 x 800 Bed. Serial No. 72 (2008) Weight 6870kg. Country of Origin: Switzerland Podey Idcxopfx Amispr Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2018 Travel ranges (X/Y/Z): 220 x 160 x 100 mm Travel ranges (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter from 0.05 mm to 0.20 mm Best achievable surface finish: Ra = 0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER hand control unit for convenient machine setup 15" LCD color display with lift keyboard and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic changeover between two wire diameters Machine dimensions: 1400 mm x 1900 mm x 1970 mm Ppsdsy E Intepfx Amijr Machine weight: 2700 kg The machine has been cleaned, overhauled, and thoroughly tested by our specialists. We are happy to commission the machine at your facility and provide training on the control system and machine operation.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Machine FANUC alpha - O I C5 Travel ranges: X 320, Y 220, U 120, V 120, Z 255 automatic wire threading Ppjdpfx Asy E In Temijr good condition year of manufacture 2004

Condition: used, Year of construction: 2006, Wire erosion / EDM Travel distance X: 570 mm Travel distance Y :370 mm Pjdpfx Asy Egfkemijpr Travel distance Z: 350 mm max. workpiece size X: 770 mm max. workpiece size Y: 520 mm max. workpiece size Z: 340 mm max. workpiece weight: 1000 kg table size X: 806 mm table size Y: 496 mm with AWF ( Automatic Wire Feeding ) U / V axis: 120 x 120 mm generator: 60 Ampere 3-sided rise and fall tank Linear drives on axes X, Y, U, V Linear scales on axes X, Y, U, V Automatic high-speed wire threading unit Ceramic components integrated in working table, Z axis quill, clamping block, wire guide Dielectric cooling controlled by thermostat 15" TFT colour monitor Max. matching current 60 A CNC power supply unit LQ33W

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Wire diameter range: 2,0 - 10,0 mm Wire feeding length: unlimited No. of CNC-axes: 5 Bend-back clearance: max. 600 mm Weight: 2.400 Kg. Psdpfx Aey Ehrfemispr *with chamfering unit* complete with an motorized wire decoiler table diamtere: 1.500 mm loading capacity: 1.500 Kg.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Wire diameter range: 2,0 - 6,0 mm Wire feeding length: unlimited complete with an motorized wire decoiler WAFIOS H 3 Pedpjy Ehpwefx Amiepr table diamtere: 1.600 mm loading capacity: 1.500 Kg.

Condition: used, Year of construction: 2021, Wire erosion / EDM Travel distance X: 800 mm Travel distance Y :600 mm Travel distance Z: 500 mm max. workpiece size X: 1050 mm max. workpiece size Y: 800 mm max. workpiece size Z: 295 mm max. workpiece weight: 1500 kg table size X: 1150 mm table size Y: 850 mm with AWF ( Automatic Wire Feeding ) U / V axis: ja Total operating hours: 4316 SPW-E Generator 8-axis simultaneous control WS5P rotary table (indexing or simultaneous movement) Taper Flex 45 NEO (for taper cutting up to 45°) Linear motors (X, Y, U, V axes) Absolute linear scales (X, Y, U, V axes) Sodick Motion Controller Ceramic work zone Remote controller 3-sided rising and lowering work tank Four-stage filtration system Improved operator usability Advanced wire tension control SODICK Fine Corner Control Energy-saving system Digital PIKA W Plus for highest surface finish DSF (Dynamic Shape First) Fixed Jet AWT (Automatic Wire Threading) Automatic water level control Wire end remover Dielectric cooling unit Voltage stabilize r LAN interface 19" TFT color display Intelligent Q3vic EDW Anti-virus software USB interface Pedpfx Amoy D N Ekoiepr Work light Integrated 20 kg wire feeder L-Cut (wire chopper) 8-axis simultaneous control

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2013 Travel ranges: X= 500 mm, Y= 350 mm, Z= 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged-type machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes automatic wire changer AWC (use of 2 wire spools) Includes Conic-Plus option Includes Fast-Threading option Includes Smart-Threading option VISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine has been thoroughly cleaned, overhauled, and extensively tested. A laser measurement of the axes was performed in-house. We are happy to carry out an individual test on the CUT 3000 for you. Including user training at Techma on your overhauled machine Optional services we offer: Ppjdpfxey Ed Eno Amier - Transport - Commissioning - Chiller - Clamping devices - Consumables

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, machine/vehicle number: 935452, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, overall weight: 4,450 kg, Equipment: documentation/manual, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software Ppjdpfx Aeywcivjmior machine powered up for inspection

Condition: used, Year of construction: 2019, Wire EDM Machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Pjdpsxpfy Sjfx Amispr Control: M800 D-CUBES Mitsubishi Electric control system Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS - Optical Drive System Tubular direct drives on X and Y axes Linear scales on X and Y axes Intelligent AT - Automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic fine hole detection function 5 controlled axes – prepared for expansion PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler ä16426

Year of construction: 2000, condition: like new (used), Second-hand machine which has never been used, YOM: 2000. Only the straightening part of the machine is available, thus, no the cutting system, neither the bank to receive cut parts (this can be purchased by the maker : Vitari). Capacity 4,0 mm max. Ppodpeim Ittjfx Amior

Condition: new, This wire and strip bending machine, equipped with 8 Yaskawa motors and Windows PC numerical control, is perfect for manufacturing large parts in 2D or 3D. Podpfxopiucxs Amispr The advantages of this equipment include low tooling costs, easy programming, low maintenance costs, reliability and dimensional repeatability of the parts produced.

Condition: new, Included in delivery: 01x Wire mesh, new Manufacturer: Garantell Material finish: sendzimir galvanized Design: placed on top Total depth: approx. 1,118 mm Inner depth: approx. 1,105 mm Upright depth: approx. 1,100 mm Beam support width: approx. 53 mm Clear supporting width: approx. 998 mm Width: approx. 1,340 mm Mesh size: approx. 110 x 95 mm Wire gauge: approx. 4.00 mm Weight per piece: approx. 6.75 kg Number of support bars: 05 pcs Support bar dimensions: approx. 998|50|1.25 mm Maximum load capacity: 500 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is only offered for collection. If transport or shipping is required, it will incur additional costs, which can be individually requested from us depending on the place of delivery or the scope of delivery. Psdpfx Amoyz Ir Reijpr

Condition: used, Year of construction: 2007, functionality: fully functional, Positioning accuracy: 0.5 a Tool changer Number of electrode positions: 4 Ppodpfx Amey Hv Ausijr Max. electrode diameter: 75 mm Max. electrode length: 280 mm Max. electrode weight: 5 kg Max. total weight: 20 kg The tool changer operates sluggishly and should be inspected. Working table Usable area: 800 x 600 mm Load capacity: 1000 kg Number of T-slots: 5 Slot diameter: 12 mm Work tank Max. internal dimensions: 1200 x 800 x 500 mm Capacity: 475 l Control cabinet Housing dimensions: 900 x 750 x 1950 mm Housing weight: 300 kg Protection rating: IP 32 Processing head with high rigidity Max. electrode weight: 100 kg Insulated interface: 250/650 mm

Condition: good (used), Winch rope, crane rope, lifting rope, wire rope, clothesline, PVC wire rope -Wire rope: PVC-coated steel cable Pjdpfx Aspy Ryqemiepr -Type: 6x7 FC PVC transparent -Rope nominal diameter 4.0 / 5.0 mm -Length: 102 m -Quantity: 1 piece available -Price: per piece -Weight: 6.6 kg/pc.

Condition: used, Year of construction: 2009, functionality: fully functional, Z-travel 300 mm Psdpfx Asy Hlvkemiopr X-travel 500 mm Y-travel 350 mm Control MITSUBISHI W 31 FSA-2

Condition: good (used), Technical data for the shelf panel: Shelving system: SSI Schäfer Type: R 3000 Included in the scope of delivery: 01x shelf panel, used Material finish: Sendzimir galvanized For upright depth: approx. 600 mm Overall width: approx. 1,600 mm Overall depth: approx. 590 mm Overall height: approx. 30 mm Frame profile: approx. 25 x 25 mm Mesh size: approx. 68 x 50 mm Weight per piece: approx. 6.90 kg Note: Podpfoyzpiqex Amiopr Water-permeable (up to 70%), suitable for sprinkler systems and thus optimized fire protection. Air-permeable – allows for good air circulation, e.g. in deep-freeze warehouses. Light-permeable – ensures a bright working environment in the warehouse. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transportation or dispatch beyond collection is subject to additional costs, which can be requested from us separately depending on the delivery location and scope.

Condition: good (used), Year of construction: 2006, FOR SALE Mitsubishi FA20S Wire EDM Machine Pedpfxjyzct As Amiopr Technical Data: - Model: FA20S (High Performance Series) - Travel (X x Y x Z): 500 x 350 x 300 mm - U/V Axis Travel: ±32 mm - Maximum workpiece dimensions: 1050 x 800 x 295 mm - Maximum workpiece weight: 1,500 kg - Maximum taper angle: ±15° (over 100 mm height) Year: 2006 Included Equipment and Options: - Filtration system: TFA20SM dielectric fluid tank - Automatic wire threading (AT) for efficient unmonitored machining - Mitsubishi CNC with user-friendly interface - Generator featuring anti-electrolysis technology for improved surface integrity Key Advantages: This machine offers excellent thermal stability and high reliability. Furthermore, spare parts and consumables (guides, filters) are readily available on the market. Condition: Used machine in good overall condition. Please do not hesitate to contact me for further information or to discuss the price. BT MACHINES PURCHASE AND SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: excellent (used), Year of construction: 1989, Machinetype: barbed wire machine Make: VITARI Type: MFS Constr. year: 1989 line wire diameter: 1,6-2,8mm point wire diamter: 1,6-2,5 mm output – meter/min: 27-47 Pjdpfxew N D Suo Amispr distance of barbs: 50-150mm Excellant condition

Condition: excellent (used), Year of construction: 1994, Nail making machine Make: WAFIOS Type: N90 Constr. year: 1994 diameter range: 2,5-3,8 mm Psdpfx Amsuhxqmjiopr nail length: 50-90 mm output – pieces/min: 800 Machine includes Automatic wire paz off and wire cleaner !!

Condition: good (used), Year of construction: 1980, Technical Details ; Wire Diameter - 1.2- 4,5 mm Nails lenght - 10- 150 mm Capacity - 800 kg/h List of equipment : 1x Wafios S150 2X Wafios S120 1x Kovopol THA 60 1X Kovopol THA 100 1X Moroni SPND 80 2x Nails polishing machine Wire Drawing Line SKET 5 Blocks Wire input - max. 6,0 mm Ppsdpevfc A Tjfx Amior Complete nail making plant in good working condition !! wire output - min. 2,5 mm

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Pjdpfsyubh Rox Amijpr Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition.