Used Wire Erosion for sale (2,909)

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travels: 1,200 x 800 mm U and V axis travels: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.30 mm Simultaneously controlled axes: 4 (X, Y, U, V) Motors: AC on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg FILTRATION UNIT Tank capacity: 3,000 liters Conductivity control system: Automatic Resin capacity: 14 liters Temperature control: Automatic Dielectric cooling system: Chiller GENERATOR Power circuits: AC MOSFET Minimum surface roughness: Ra 0.35 µm Cutting speed: 360 mm²/min (brass wire Ø 0.30 mm) Automatic wire threading: Standard Power supply: 400V, three-phase CNC CONTROL Hardware: 64-bit industrial PC Memory: 1 GB Screen: 15” TFT touchscreen Data input: Keyboard, RS232, floppy disk, LAN, USB Positioning system: Closed-loop servo-controlled Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm MACHINE EQUIPPED WITH: Kjdpfoxwmacjx Aiisdr Optical scales on X and Y axes 600 mm Z axis Wire spool holder for coils up to 50 kg No. 1 set of 0.25 mm guides No. 1 set of 0.30 mm guides Taper cutting system Automatic wire threading and re-threading after breakage Clamping system: frame with universal drilling pattern 64-bit CNC control with 16 GB memory AC power generator with anti-electrolysis device Automatic technology generation Serial interface, floppy drive, LAN, USB Dielectric unit with automatic demineralization system Chiller Year of manufacture: 2018

Condition: used, Year of construction: 2011, Wire erosion / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 250 mm max. workpiece size X: 590 mm max. workpiece size Y: 450 mm max. workpiece size Z: 250 mm max. workpiece weight: 550 kg table size X: 935 mm table size Y: 770 mm U / V axis: 80 CNC wire EDM machine X/Y travel: 400 × 300 mm Z-axis travel: 250–350 mm U/V axes: 80 × 80 mm Taper cutting: up to ±20° at 80 mm workpiece height Max. workpiece dimensions: 590 × 450 × 250 mm Kdedpszu Rurofx Aiior Max. workpiece weight: 550 kg Large worktable: 935 × 770 mm Wire diameter: 0.1–0.3 mm Max. wire speed: 420 mm/s Linear motor technology on X and Y axes Suitable for high-precision contours and complex workpiece geometries U/V axes also enable angled and taper cutting

Condition: used, TECHNICAL DETAILS Kedoy Tzc Tepfx Aiiedr TRAVELS - Travels on X/Y/Z axes : 600x400x310 [mm] - Travels on U/V axes : [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 1050x820x300 [mm] - Max. part weight : 1000 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2650x3050 [mm] - Machine height : 2070 [mm] - Machine weight : 3600 [kg] EQUIPMENT - CNC : Fanuc 31iw-model B - Cooling unit - Filtration unit

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 600x400x310 [mm] - Travels on U/V axes : [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 1050x820x300 [mm] - Max. part weight : 1000 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2650x3050 [mm] - Machine height : 2070 [mm] - Machine weight : 3600 [kg] MACHINE HOURS - Spark erosion hours : 2000 [h] EQUIPMENT - CNC : Fanuc 31iw-model B - Cooling unit Kdodpfx Aisyxhmieisr - Filtration unit

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 600x400x310 [mm] - Travels on U/V axes : [mm] - Max. taper : [°/mm] PART Kdsdpfjyxhmvex Aiisr - Max. part dimensions : 1050x820x300 [mm] - Max. part weight : 1000 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2650x3050 [mm] - Machine height : 2070 [mm] - Machine weight : 3600 [kg] MACHINE HOURS - Spark erosion hours : 15000 [h] EQUIPMENT - CNC : Fanuc 31iw-model B - Cooling unit - Filtration unit

Condition: used, TECHNICAL DETAILS - part maxi dimensions : 650 x 420 [mm] - part maxi thickness : 160 [mm] - maxi weight : 350 [kg] - strokes (X,Y,Z) : 320 x 220 x 180 [mm] - table traverse speed : 900 [mm/min] - wire unrolling speed : 0 - 10 [m/min] - wire tension : 80 to 2500 [gr] Kdodpfjuhcbcsx Aiier - wire guide : Ø 0,25 [mm] - tank capacity : 260 [l] - dimensions : 3 200 x 2 200 x 2 000 [mm] - weight : 1 900 [kg] EQUIPMENT - CNC FANUC 16W control - cooling unit - cooling tank with pump - automatic threading

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 370x270x255 [mm] - Travels on U/V axes : [mm] - Max. taper : +/-30/80 [°/mm] PART - Max. part dimensions : 700x600x250 [mm] - Max. part weight : 500 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1930x2330 [mm] - Machine height : 2270 [mm] Kdsdpfx Aoxqrqasiior - Machine weight : 2165 [kg] MACHINE HOURS - Number of working hours : 15874 [h] EQUIPMENT - CNC : Fanuc 31i-WA - Cooling unit - Filtration unit

Condition: used, Year of construction: 2013, Wire erosion / EDM Kedpfsy S Tgzox Aiiedr Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 350 mm max. workpiece size X: 800 mm max. workpiece size Y: 570 mm max. workpiece size Z: 340 mm max. workpiece weight: 1000 kg table size X: 1050 mm table size Y: 710 mm with AWF ( Automatic Wire Feeding ) U / V axis: 150 x 150 mm submerged CNC Control: SPW

Condition: good (used), Year of construction: 2004, functionality: fully functional, The used FANUC ALFA 1-iC wire EDM is a medium-sized, 5-axis CNC-controlled electrical discharge machine with submerged machining; X/Y/Z travel: 550/370/410 mm; year of manufacture: 2004, CE-compliant, complete with automatic wire threading, chiller, and openable roof. Technical specifications of the FANUC ROBOCUT ALPHA 1iC wire EDM: - Maximum workpiece dimensions (L x W x H): 820 x 730 x 300 mm Ksdpfx Aisxd R Hmsisdr - Maximum workpiece weight: 1000 kg - CNC control: Fanuc Series 180is-WB - 5 axes (X, Y, Z, U, V) - Stroke on axes X/Y/Z/U/V: 550/370/410/120/120 mm - Rapid traverse on X, Y, Z axes: 900 mm/min - Rapid traverse on U, V axes: 450 mm/min - Worktable size (L x W): 780 x 600 mm - Maximum cutting angle: 30 degrees - Automatic wire threading - Wire diameter: 0.1–0.3 mm - Electrical supply: 400 V; 50/60 Hz - Total power requirement: 13 kW - Total machine weight: 3100 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Kdsdpfx Asw Ucyuoiijr Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: used, Year of construction: 2006, Wire erosion / EDM Travel distance X: 300 mm Travel distance Y :200 mm Travel distance Z: 200 mm max. workpiece size X: 500 mm Kjdpey Uvpdefx Aiisdr max. workpiece size Y: 300 mm max. workpiece size Z: 200 mm max. workpiece weight: 300 kg table size X: 536 mm table size Y: 337 mm with AWF ( Automatic Wire Feeding ) U / V axis: 80x80 generator: 60 Ampere submerged Control: Sodick LN1W Taper Cutting Capacity: ±20° / 80 mm Wire Diameter: 0.15–0.30 mm

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t Kjdpjuzbaysfx Aiijdr dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Condition: used, Year of construction: 2005, Wire erosion / EDM Travel distance X: 750 mm Travel distance Y :500 mm Travel distance Z: 400 mm max. workpiece size X: 1050 mm Kdjdpsy Tl I Hjfx Aiisr max. workpiece size Y: 750 mm max. workpiece size Z: 400 mm max. workpiece weight: 1500 kg with AWF ( Automatic Wire Feeding ) U / V axis: 770 x 520 mm Machine Dimension:. 2050 x 2850 x 2295 mm Machine Weight: 6000 kg Dielectric System Submerged machining CNC Control: LQ33W • Linear Motor Drives (X/Y/U/V) • Glass Scale Feedback System • No Backlash • High-Speed Automatic Wire Threading (AWT) • Ceramic Components • Advanced Corner Control • LAN / Network Connection • Dielectric Cooling Unit • Built-In Voltage Stabilizer • Precision Motion Controller (K-SMC)

Condition: used, Year of construction: 2003, Wire erosion / EDM Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 256 mm max. workpiece size X: 750 mm Kodpfx Aow Ekr Isiijdr max. workpiece size Y: 550 mm max. workpiece size Z: 250 mm max. workpiece weight: 450 kg with AWF ( Automatic Wire Feeding )

Condition: used, Year of construction: 2002, Wire erosion / EDM Travel distance X: 750 mm Travel distance Y :500 mm Travel distance Z: 400 mm max. workpiece size X: 1050 mm Ksdpfow Ei Stjx Aiijdr max. workpiece size Y: 750 mm max. workpiece size Z: 400 mm max. workpiece weight: 1500 kg U / V axis: 770 x 520 mm generator: 60 Ampere Linear drives

Condition: used, Year of construction: 2006, Wire erosion / EDM Kedpow S Egfefx Aiisdr Travel distance X: 500 mm Travel distance Y :350 mm Travel distance Z: 300 mm max. workpiece size X: 1050 mm max. workpiece size Y: 800 mm max. workpiece size Z: 295 mm max. workpiece weight: 1500 kg table size X: 780 mm table size Y: 630 mm with AWF ( Automatic Wire Feeding ) U / V axis: 42 mm generator: 50 Ampere submerged

Condition: good (used), Hello, we offer used Erowa clamping beams in the following dimensions: Kdjdpfxoih Smas Aiisr 220mm 300mm 380mm 460mm Other dimensions would also be available. Delivery possible for an extra charge. If you have any further inquiries, we will be happy to address them.

Condition: used, Year of construction: 2004, Wire erosion / EDM Travel distance X: 350 mm Kdedpowf I Imjfx Aiijr Travel distance Y :250 mm Travel distance Z: 256 mm max. workpiece size X: 750 mm max. workpiece size Y: 550 mm max. workpiece size Z: 250 mm max. workpiece weight: 200 kg submerged cooling unit The machine has been serviced annually by the manufacturer.

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Kjdpfx Aiezu Hxgoiedr

Condition: excellent (used), Year of construction: 2015, operating hours: 16,508 h, functionality: fully functional, GF AgieCharmilles CUT 2000 S Wire EDM Machine – Year 2015 – EROWA Tooling Package with a value of 20,000 EUR included!!!! High-precision CNC wire EDM machine from GF AgieCharmilles in very good technical condition. Manufacturer: GF AgieCharmilles Model: CUT 2000 S Year of manufacture: 2015 Travels: X-axis: 350 mm Y-axis: 250 mm Z-axis: 256 mm Max. workpiece size: 750 × 550 × 250 mm Max. workpiece weight: 400 kg Machine hours: Erosion hours: 16,508 h Kdedpfszvdv Ejx Aiior Technical data: Power supply: 3 x 400 V Machine weight: approx. 3,500 kg Equipment: • Automatic wire threading • CNC control system GF AgieCharmilles • Complete EROWA tooling package included • Multiple EROWA fixtures and clamping elements • Precision EDM tooling and accessories (see photos) Advantages: • Very reliable EDM machine for toolmaking and precision parts • High cutting accuracy and excellent surface finish • Modern GF AgieCharmilles control system Condition: The machine is in good working condition. The machine is still powered and can be inspected and tested while powered. Location: Czech Republic Availability: Immediate

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 2,790 mm, total width: 2,020 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, overall weight: 4,440 kg, warranty duration: 6 months, tank capacity: 1,000 l, Equipment: cooling unit, GF AgieCharmilles CUT E600 Year of manufacture: 2019 Wire erosion machine with automatic wire threading Travel ranges (X/Y/Z): 600 x 400 x 350 mm Travel ranges (U/V): +/- 50 mm Ksdpfxszvf Dde Aiijdr Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 1030 x 800 x 350 mm Max. workpiece weight: 1000 kg Excellent surface quality for hard metal/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 and 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 2020 x 2790 x 2320 mm Total weight without dielectric fluid: 4440 kg The wire erosion machine will be cleaned, serviced, and thoroughly tested by us after the order is received. We can also perform a test cut or a live demonstration beforehand. Commissioning and training can also be carried out by us. Optionally, we offer the following: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 396-900-115-0108, workpiece weight (max.): 2,890 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, workpiece height (max.): 250 mm, workpiece width (max.): 900 mm, workpiece length (max.): 680 mm, Ορίστε μια σύντομη, επαγγελματική και περιεκτική περιγραφή που μπορείς να χρησιμοποιήσεις: GF AgieCharmilles CUT 20 P – Wire EDM Machine Kjdpfxozncqlo Aiiodr Well-maintained AgieCharmilles CUT 20 P wire erosion machine in excellent working condition. Features the Performance Package for higher cutting speeds and superior surface finish. Year of Manufacture: 2011 Travels (X / Y / Z): 350 x 250 x 250 mm Max. Workpiece Dimensions: 900 x 680 x 250 mm Max. Workpiece Weight: 400 kg Features: Automatic Wire Threading (AWT), IPG Generator, integrated dielectric filtration unit. Ready for inspection under power.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 101D1902, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 300 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 775 mm, Equipment: documentation/manual, We are selling a wire erosion machine. Condition: used, fully functional Technical specifications: Manufacturer: FANUC Model: Alpha 1iD CNC control: FANUC 310i-WA Operation: Touchscreen; Editor Manual control panel: yes Travel ranges: X 600 mm × Y 400 mm × Z 310 mm U/V axes: ±100 mm (total travel of 200 mm) Wire diameter: 0.10–0.30 mm Max. workpiece size: approx. 1,050 × 775 × 300 mm Kjdpjzlg Agofx Aiiedr Automatic wire threading (AWT) Machining under water; full immersion machine Ethernet and USB connection The FANUC Alpha 1iD offers reliability, very good cutting quality, and low maintenance requirements. High-quality clamping devices, Hirschmann System 4000, can also be included. The machine can be inspected and tested by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: used, Mitsubishi Wire EDM Machine, Spark Erosion Machine, Mitsubishi DWC 150 SZ, Used Machine Manufacturer: Mitsubishi Type: DWC 150 SZ Year of Manufacture: 1994 Overall Dimensions (Main Unit): Width: 1860 mm Depth: 2050 mm Height: 2400 mm Kjdpfx Aioyxfqroiedr Electrical Data: 400V; 21.5A Weight: 3500 kg Water Tank Size: 750 x 780 mm Electrical Cabinet Dimensions: Width: 1150 mm Depth: 2700 mm Height: 1050 mm Wire Feeder Unit Dimensions: Width: 320 mm Depth: 580 mm Height: 1380 mm Transformer Dimensions: Width: 510 mm Depth: 590 mm Height: 640 mm Water Treatment System Dimensions: Width: 1320 mm Depth: 1460 mm Height: 1360 mm Condition: Untested, sold in "as-is" condition. The machine is available for sale with the accessories and in the aesthetic condition shown in the photos.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: W150474, workpiece weight (max.): 1,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 420 mm, workpiece height (max.): 420 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,000 mm, overall weight: 6,000 kg, Equipment: cooling unit, documentation/manual, The Makino U6 H.E.A.T. is a high-precision wire EDM machine for machining tool steel, hard metal, titanium, Inconel, and other difficult-to-machine materials. It is specifically designed for tool and die making, aerospace, medical technology, and precision manufacturing. Key technical specifications: Travel ranges (X/Y/Z): 650 × 450 × 420 mm U/V axes: ±75 mm Max. workpiece size: 1,000 × 800 × 400 mm Max. workpiece weight: 1,500 kg Kodjzq Tc Dspfx Aiisdr Available wire diameters: 0.10 / 0.15 / 0.20 / 0.25 / 0.30 mm Work table: 910 × 710 mm (hardened, usable on four sides) Special features of the H.E.A.T. version: *H.E.A.T. (High Energy Applied Technology) for significantly higher cutting speeds under difficult flushing conditions. *Two independent high-performance flushing pumps for higher pressure and better removal of erosion particles. *Four-stage filter system with air vent for easier filter replacement. *Split-V wire guide, which is much more durable than conventional round wire guides and requires less maintenance. *Hyper-i control with 24" touchscreen, mouse, and keyboard, as well as integrated manuals and training videos.