Used Wire erosion machine x-travel 300-399mm for sale

Wire eroding machine in oil bath

AGIE CUT CLASSIC V2

2007

ready for operation (used)

Call

General Data Measurements width 2040 mm Measurements depth 1640 mm Measurements height 2220 mm Machine weight 2680 kg Main Drive Number of axis 4 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 256 mm V-Axis Movement (+-) 70 mm U-Axis Movement (+-) 70 mm Pfxuqtj2 This AGIE CUT CLASSIC V2 Erosion machine was manufactured in the year 2007 in Switzerland. It is equipped with 4 axis. The machine has a standard spool size of 25 kg. It is refurbished, in perfect condition and...

Listing

Nürtingen

7970 km

Charmilles Robofil 2050 TWO

2008

refurbished (used)

Call

Charmilles Robofil 2050 TWO Year of manufacture 2008 Wire eroding machine in oil bath travels (X/Y/Z): 320 x 220 x 160 mm travels (U/V): +/- 48 mm taper: 30° at 66 mm height Cq0i23gftm Max. workpiece dimensions: 1000 x 490 x 260 mm Max. Workpiece weight: 500 kg Dielectric volume (oil): 240 liters Max. Fill level dielectric: 130 mm possible wire diameters: 0.33 / 0.30 / 0.20 / 0.15 / 0.10 / 0.07 / 0.05 mm dimensions of the line: 2320 x 2310 x 2320 mm total weight: 3900 kg The Charmilles Robo...

Listing

7870 km

wire EDM machine

AGIE Agiecut Progress V2

2007

excellent (used)

Call

AGIECUT Progress V2 Year of construction: 2007 Control: AGIE Traverse paths (X/Y/Z): 350x250x256mm max. workpiece dimensions: 750x550x250mm Max. workpiece weight: 200kg (in the bath)/ 450kg (without bath) max. cutting rate: 500mm²/min Operating hours: approx. 63,200h Pwehwte EDM hours: approx. 15,500h Dimensions: approx. 1.7x2.05x2.22m Weight: approx. 2.6 tons The machine was serviced in November 2022 and the geometry was measured. She is in a very good condition.

Listing

Bienne

7940 km

WIRE ED-SINKING MACHINE

CHARMILLES ROBOFIL 240 SL

2005

excellent (used)

Call

TECHNICAL DATA Travels (X x Y x Z) 350 x 220 x 200 mm Maximal workpiece size X : 1000 mm Maximal workpiece size Y : 550 mm Ywgyxw Maximal workpiece size Z : 220 mm Maximal workpiece weight 750 kg Table dimensions X : 680 mm Y : 450 mm With automatic wire rewinding Machining in water bath errors and omissions excepted-data given without obligation

Listing

8020 km

AGIECHARMILLES +GF+ CUT20P - 2010 Wire cutting EDM

AGIECHARMILLES +GF+ CUT 20P

2010

used

Call

Discover more used machines

Wire erosion machine x-travel 500-699mm

Cavity sinking machines x-travel 300-399mm

Wire cut edm machine

Wire edm

Wire edm machine

Agie

Agie evolution

Agie evolution 2

Agie charmilles

Erosion

Listing

Iserlohn

7700 km

AGIE CUT 100-D

1990

ready for operation (used)

€2,250

Call

Fully functional wire eroding machine for self pickup. Machine is still in operation & can be inspected on site. !! Available from June 2023 !!! Ddkv2uoj

Listing

Portugal

7326 km

AGIE INTEGRAL 2

1995

ready for operation (used)

Call

General Data Measurements width 4000 mm Measurements depth 3000 mm Measurements height 2580 mm Machine weight 2550 kg Main Drive Number of axis 4 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 350 mm Pxs27y This AGIE INTEGRAL 2 Erosion machine was manufactured in the year 1995 in Switzerland. It has 4 axis. The machine has an EROWA chuck. Application Types EDM

Listing

Nürtingen

7970 km

AGIE Excellence 2

1999

refurbished (used)

Call

AGIECUT Excellence 2, year 1999; Achievable surface quality: Ra 0.1 µm; 3lyegdhzl Travel: X=350 mm, Y=250 mm, Z=256 mm; Dual measuring system with glass scales in X and Y axis; Water bath machine with automatic wire feeding; With lowerable container; Incl. wire straightener; Conical cutting device up to max. 30 degrees; Incl. universal clamping frame and hand box; Order management is possible on the machine; The machine will be completely overhauled and tested by us after receipt of order. Wit...

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

8351 km

AGIE CLASSIC V2 - 2007 Wire cutting EDM machine

Sodick AQ 325 L

2004

repair required (used)

Call

Catalog No. : 6482 Type: AQ 325 L Producer: Sodick Made in: 2004 Characteristic: Table dimensions: 600 x 400 mm Maximum travel length X-axis: 350 mm Maximum travel length Y-axis: 250 mm Maximum travel length Z-axis: 220 mm Travel length U-axis ( -): 80 mm Travel length V-axis ( -): 80 mm Maximum table load: 450 kg 3obsvuot Accuracy of positioning: 0.02 mm Machine height: 2080 mm Machine length: 2250 mm Machine width: 2430 mm Machine weight: 3000 kg Equipment: Filtration of rinse wa...

Listing

Bühl

(dealership location)

7891 km

Wire Eroding Machine

AGIE AGIECUT EVOLUTION BC 2

1997

used

Call

x-travel 350 mm y-travel 250 mm z-travel 256 mm max. size of workpiece 750 x 550 x 250 mm U-axis +/- 70 mm V-axis +/- 70 mm rapid traverse X/Y/Z axis 1,5 / 1,5 / 0,6 m/min rapid traverse U/V-axis 0,6 m/min max. concentricity 30° / 100 mm control AGIEVISION wire dia. 0,1 - 0,33 mm speed of wire 60 - 300 mm/sec wire retraction halbautomatisch total power requirement 9,1 kVA weight of the machine ca. 3,6 t dimensions 2,21 x 2,21 x 2,22 m Beohs2r3hy

Listing

Rolle, CH

(dealership location)

7924 km

AGIE CLASSIC V2

2007

used

Call

Listing

Shkupi

9171 km

Wire erosion machine

AGIE AGIECUT 100

1986

ready for operation (used)

€5,200

Call

Wire eroding machine make AGIE type Agiecut AC 100 Year of construction: 1986 working range X 300 mm working range Y 200 mm working range Z 250 mm table length 510 mm table width 580 mm Workpiece dimensions 810 x 580 x 250 mm Workpiece weight max. 200 kg Gjcrzbc wire diameter 0.03 - 0.3 mm Total power requirement 10 kW weight approx. 3,0 t with - Agiepuls MM

Listing

7870 km

CNC wire eroding wire cutting machine

AGIE AGIECUT 150 HSS

1994

ready for operation (used)

Call

General Data Measurements width 1700 mm Measurements depth 1600 mm Measurements height 2140 mm Machine weight 2720 kg Control Unit Brand Agie Model Agiematic CF Movement B3xt8wt X-Axis Movement 300 mm Y-Axis Movement 200 mm Z-Axis Movement 224 mm V-Axis Movement ± 30 mm U-Axis Movement ± 30 mm Workpiece Workpiece X 810 mm Workpiece Y 580 mm Workpiece Z 220 mm Table Outer length 560 mm Outer width 445 mm This AGIE AGIECUT 150 HSS Erosion machine was built in 1994 in Switzerland. It is equipp...

Listing

8559 km

Wire Cutter

Mitsubishi FX 10

1997

used

Call

under power travels: X 350 mm, Y 250 mm, Z 220 mm table: 630x530 mm max. workpiece weight 500 kg max. workpiece size w x d x h: 800 x 575 x 215 mm tank capacity 400 l weight 2740 kg machine size 1390x1865x1800 mm water tank size 800x1360x1720 mm Carg0cmjkr size of el. box 800x600x1880 mm

Listing

Genève

7926 km

Wire erosion

CHARMILLES Robofil 2050TW

2006

refurbished (used)

Call

Robofil 2050 TW YEAR: 2006 APPLICATION TYPE: EDM MACHINE TYPE: WIRE EROSION AVAILABILITY: IMMEDIATELY TECHNICAL INFORMATION MACHINE WEIGHT: 3000 kg MESUREMENTS: 2320 x 2310 x 2320 mm MOVEMENT Hzdabqd X-AXIS MOVEMENT: 320mm Y-AXIS MOVEMENT: 220mm Z-AXIS MOVEMENT: 220mm V-AXIS MOVEMENT: 48mm U-AXIS MOVEMENT: 48mm WORKPIECE WORKPIECE X: 1000mm WORKPIECE Y: 490mm WORKPIECE Z: 260mm WORKPIECE WEIGHT: 500kg

Listing

Mühlheim am Main

7845 km

CHARMILLES (AGIE) Robofil 2030 SI

2000

excellent (used)

Call

Machine type: CNC wire eroding machine / wire cutting machine Manufacturer: CHARMILLES (AGIE) Model: Robofil 2030 SI Year of manufacture: 2000 Condition: very good Offer type: used machine Technical data: Control: Charmilles CT workpiece dimensions: max. 990 x 505 mm, height 260 mm load: max. 500 kg Generator type: Isopulse Cgyzjelzx9 Drive: 12 kVA Material removal rate: max. 300 mm²/min. Traversing range: x = 318 mm y = 218 mm z = 114 mm Remark: various accessories weight: 3200 kg The mach...

Listing

Rolle, CH

(dealership location)

7924 km

AGIE CHARMILLES +GF+ CUT 2000 Twin wire - 2011 Wi

AGIECHARMILLES +GF+ CUT 2000 TWIN WIRE

2011

used

Call

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

8351 km

AGIE AGIECUT 150 HSS CE

1977

good (used)

Call

Catalog No. : 6086 Type: AGIECUT 150 HSS CE Producer: AGIE Gy0m7w Made in: 1977 Characteristic: Control system: AGIEMATIC CF 50 SE Table dimensions: 560x445 mm Maximum travel length X-axis: 300 mm Maximum travel length Y-axis: 200 mm Maximum travel length Z-axis: 251 mm Travel length U-axis ( -): 30 mm Travel length V-axis ( -): 30 mm Maximum workpieces length: 810 mm Maximum workpieces height: 250 mm Maximum workpieces width: 580 mm Largest workpiece weight: 450 kg Machine height: 2...

Listing

7597 km

FANUC Robocut Alpha-0iA

2000

ready for operation (used)

Call

General Data Machine weight 1200 kg Control Unit Brand Fanuc Model Series 18i-W Movement X-Axis Movement 320 mm Y-Axis Movement 220 mm Z-Axis Movement 180 mm Media Hjsyehh Power consumption 13 kVa This Fanuc Robocut Alpha-0iA Erosion machine was manufactured in the year 2000 in Japan. It is equipped with a Fanuc Series 18i-W control unit. Application Types EDM

Listing

Besnica 22a-22a, 1000 Ljubljana, Slovenia

8464 km

WIRE EDM MACHINE

SPM EZ10S

2012

reconditioned (used)

€23,000

Linear die sinking machine

Call

axis travel X 350 mm, Y 250 mm, Z 210 mm, U/V 100 mm 2wrejeo submerged water chiller wire chooper

Listing

Genève

7926 km

Wire erosion

CHARMILLES Robofil 240SL

2005

refurbished (used)

Call

Dimensions of the complete equipment: 2020 x 2050 x 2000 mm Weight of the equipment (without dielectric): 2450 kg Maximum workpiece dimensions: 1000x550x220 mm Maximum workpiece weight: 750 kg Dimensions of the table: 680 x 450 mm X, Y, Z travel: 350x220x220 mm Cksxzhf2ot U, V travel: 350 x 220 mm Anti-collision protection: X, Y, U, V, Z Max. taper: ± 30°/220

Listing

Jakling

8423 km

Sodick AD3L

2010

good condition (used)

Call

Sell as new linear die sinking machine Sodick AD3L year 2010. Travels: X:300mm Rko2j Y:250mm Z:250mm Table size: 600x400mm Maximum workpiece weight: 550kg Maximum electrode weight: 50kg Power requirement: 11KVA Machine is immediately available! Machine is ready for immediate use! Transport can be organized on request!

Listing

Kalocsa

8680 km

Electronica Eco Cut 377 running hour!!!

Electronica Eco Cut

2008

as good as new (ex-display)

€19,900

Call

aa Max. table size 370 x 600 mm Max, work piece height 200 mm Max, work piece weight 300 kg Main table traverse (X, Y) 250, 350 mm Auxiliary table traverse (u, v) 30, 30 mm Max, taper cutting angle ±50/100 mm Max. wire spool capacity 6 kg Dry run speed 80 mm/min. 3k9hrt3j Wire diameter 0.25 mm (standard) Integral design with compact footprint Max. cutting speed: - 70 mm2/min. [With Ø 0.25 special (soft) Brass wire on 50 mm thick HcHcr (Steel) workpiece] - 60 mm2/min. [With Ø 0.25 plain Brass wir...

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

8351 km

EDM cutting machine

HITACHI 355Y

2000

good (used)

Call

Catalog No. : 4296 Type: 355Y Producer: HITACHI Made in: 2000 Characteristic: Length of the table: 1160 mm Width of the table: 638 mm 2rhqo3 Maximum travel length X-axis: 350 mm Maximum travel length Y-axis: 500 mm Maximum travel length Z-axis: 300 mm Travel length U-axis ( -): 200 mm Travel length V-axis ( -): 200 mm FFII Generator AWF Dielectric cooling Bath Power Generator X2

Listing

Székesfehérvár

8603 km

Wire cut EDM

AGIE CHARMILLES CUT 20P

2017

good condition (used)

Call

Table size 700 x 480 mm Zw3mgfje X travel 350 mm Y travel 250 mm Z travel 250 mm U/V travel +/-45 mm Max. taper cut +/-10 degree Max. size of workpieces 820 x 680 x 250 mm Max. weight of workpieces 400 kgs Wire speed 3 - 330 mm/sec Dimensions LxWxH = 2500 x 2500 x 2200 mm Weight ca. 2640 kgs Accessories - Coolant tank - Manuals Very little working hours. The machine is like new. There are two identical machines.

Listing

Vereinigte Arabische Emirate

12583 km

AGIE Challenge 2

2000

ready for operation (used)

Call

General Data Measurements width 2215 mm Measurements depth 2215 mm Measurements height 2220 mm Machine weight 3600 kg Control Unit Brand AGIEVISION Movement Ij8jv78r0 X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 256 mm U-Axis Movement +/- 70 mm Workpiece Workpiece drm over bed 750 mm Workpiece drm over support 550 mm Workpiece drm 250 mm Workpiece weight 200/450 kg This Agie Challenge 2 Erosion machine 3 was manufactured in the year 2000. It is equipped with a AGIEVISION con...

Listing

Schwäbisch Gmünd

7988 km

CNC wire eroding machine

FANUC ROBOCUT ALPHA 0C

1998

ready for operation (used)

Call

CNC wire eroding machine FANUC ROBOCUT ALPHA 0C year of manufacture 1998 Fcdkygi7 CNC control FANUC 18i travels (X,Y,Z) : 320 x 220 x 180 [mm] pieces maximum dimensions : 650 x 420 [mm] pieces maximum thickness : 160 [mm] maximum weight : 350 [kg] table displacement speed : 900 [mm/min} wire payoff speed : 0 - 10 [m/min] wire tension : 80 to 2500 [gr] wire guide : Ø 0,25 [mm] tank capacity : 260 [l] dimensions : 3 200 x 2 200 x 2 000 [mm] weight : approx. 1 500 [kg]

Listing

Heilbronn

7927 km

5 axis wire edm machine

Charmilles Robofil 2030 SI

1999

good (used)

Call

L.-Nr. 8.5-499 1 gebr. CNC Drahterodiermaschine Charmilles Robofil 2030 SI, Bj.1999 1 used CNC Wire Erosion Machine Charmilles Robofil 2030 SI, built 1999 Palettenwechsler Erowa Palet chnager Erowa Chehsmqpnb Technische Daten – technical details: Arbeitsbereich / working area 1130x510x260 mm Verfahrweg X / travel X 318 mm Verfahrweg Y / travel Y 218 mm Verfahrweg Z / travel Z 114 mm Verfahrweg U / travel U 48 mm Verfahrweg V / travel V 48 mm max. Neigung/Höhe / max. grade/height +-48°/400 mm m...

Listing

Semsales

7955 km

Agie Classic V2

AGIE Classic V2

2007

excellent (used)

Call

X-Y-Z strokes: 350 x 250 x 256 mm Max room dimensions: 750 x 550 x 250 mm Software Agie Vision 5 Rijzt Cutting, automatic threading.

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

8351 km

Hitachi 203 Y

2002

good (used)

Call

Catalog No. : 6099 Type: 203 Y Producer: Hitachi Made in: 2002 Characteristic: Total hours: 39801 h Maximum travel length X-axis: 330 mm Maximum travel length Y-axis: 250 mm F92gjxt Maximum travel length Z-axis: 160 mm Machine weight: 300 kg

Listing

Mögglingen

7995 km

wire edm machine

SODICK AQ 300L

2005

good (used)

Call

Control LN1W Travel X/Y/Z 300/200/200 mm Table size: 536x337 mm Container: 750x500mm Workpiece weight: max. 300 KG Taper angle: +- 20°/ 80mm Machine dimensions: WxDxH 1300x2400x2210 mm Machine weight: 2500 KG Water bath; Ciizjqqcz9 automatic wire threading

Listing

Herscheid

7715 km

Mitsubishi FA 10 V

2003

used

Call

Wire eroding machine Mitsubishi FA 10 V Year of manufacture 2003 movement X-axis 350 mm Cbx9utnhcc movement Y-axis 250 mm movement Z-axis 220 mm Automatic wire threading

Listing

Nürtingen

7970 km

Wire EDM

AGIE Classic 2S

2003

refurbished (used)

Call

AGIE Classic 2S Year of manufacture 2003 U2w9up9p travels (X/Y/Z): 350 x 250 x 256 mm travels (U/V): +/- 70 mm Possible taper: +/- 30° at 100 mm Available wire diameters: 0,2-0,33 mm Best surface finish: Ra 0,3 µm Max. Workpiece dimensions (width/depth/height): 750 x 550 x 250 mm Max. Workpiece weight (with / without bath): 200 / 450 kg Plant dimensions (width/depth/height): 1640 x 2040 x 2220 mm Operating weight: 2680 kg Incl. 6 months warranty Incl. commissioning and training The machine w...

Listing

Emmelshausen

7767 km

wire EDM machine

Sodick AD 325 L

2008

used

Call

Travel axes: 320 x 250 x 220 mm [ X x Y x Z ] max. workpiece size X: 780 mm max. workpiece size Y: 570 mm max. workpiece size Z: 200 mm max. workpiece weight: 350 kg with AWF ( Automatic Wire Feeding ) U / V axis: 80 mm x 80 mm submerged max. taper cut: +/- 15° with 120 mm Zggttegf

Listing

Leingarten

7924 km

AGIE AgieCut Classic 2

2002

good (used)

Call

Wire eroding machine Manufacturer: AGIE Type: AgieCut Classic 2 Zu9scys Year of manufacture: 2002 Control: CNC weight: 2,6 t X-way: 350 mm Y-way: 250 mm Z-way: 256 mm V-way: +/- 70 mm rapid traverse U / V / Z: 0.6 m/min workpiece weight: 450 kg Ø wire: 0,2 - 0,33 mm Space requirement: 2.0 x 2.5 x 2.3 m Max. Workpiece dimensions 750 x 550 x 250 mm Max. Taper 30 ° Wire threading system: x Wire spool up to 16 kg Wire tensile force 0 - 25 N Wire speed 60 - 300 mm/s Dielectric tank 220 l

Listing

United Kingdom

6838 km

EDM Spark Erosion

AGIE CHARMILLES Agietron Integral 2

1997

good condition (used)

€9,950

Call

Can be seen running Clyjxxrw Serviced regularly by Agie Engineer Axis Travel (X,Y,Z) 350mm x 250mm x 350mm Toolchanger 28 position. Tooling Erowa C axis - Yes Worldwide Delivery Available Installation available at additional cost

Listing

Semsales

7955 km

Agiecut Evolution 2

Agie Evolution 2

1997

excellent (used)

Call

X - Y - Z strokes: 350 - 250 - 256 mm. Automatic cutting, threading, rethreading. Delivered with complete documentation. Functional machine. Sold with diskette for soft loading. Machine visible in our workshop in Semsales (Switzerland). Chqpc9wn0y Loading on the truck included.

Listing

Loyettes

7895 km

EDM

Robocut Alpha α-0iA

2000

good (used)

Call

Fanuc Robocut Alpha α-0iA wycinarka drutowa CNC Producent [manufacturer]: Fanuc Typ [ type ]: Robocut Alpha α-0iA Steuerung [jednostka sterująca]: Fanuc Seria 18i-W Wraz z panelem obsługi Rok budowy [rok budowy]: 10/1999 godziny pracy: 15.900h podróże [X,Y,Z,U,V] : 320 x 220 x 180 x 120 [mm] sztuk maksymalne wymiary : 650 x 420 [mm] sztuk maksymalna grubość : 300 [mm] masa maksymalna : 250 [kg] Prędkość przesuwu stołu : 900 [mm/min] oś U,V prędkość : 450 [mm/min] prędkość wycofywania drutu : 0 ...

Listing

Nürtingen

7970 km

GF AgieCharmilles Progress VP2

2011

refurbished (used)

Call

GF AgieCharmilles Progress VP2 Year of manufacture 2011 travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axis for increased precision Available wire diameters: 0.15 - 0.33 mm Water bath machine with automatic wire threading and r...

Listing

Soerendonk

7580 km

EDM die sinking machine

ARD M50F

1995

good (used)

€2,450

Call

ARD EDM diesinking machine offered. Type: M 50 F Control unit: ARD system Facile A X-travel: 310 mm Y-travel: 200 mm Z-travel: 200 mm Bed: 360 x 600 mm Power: 5,5 KVA Spindle type: System 3R Spindle stroke: 200 mm Year: 1995 Dimensions: 150x135x210 cm LxWxH For more information call us or send an e-mail. Ug2myl2p

Listing

Leingarten

7924 km

CNC wire eroding machine

Makino EC 3040

1992

good (used)

€4,500

Call

CNC wire eroding machine Manufacturer: Makino Type: EC 3040 Year of manufacture: 1992 Control: Fanuc Travel X-axis: 300 Bxp8qumils Y-axis: 400 Z-axis: 280

Listing

Wermelskirchen

7687 km

Sodick AQ 325 L

2000

good (used)

Call

travels 350 x 250 x 220 (X x Y x Z) additional axes 80 x 80 (U x V) max. workpiece weight 450 kg Qxw9b

Listing

Burbach

7762 km

Sodick A 320

1998

not inspected (used)

€3,500

Call

The system is functional and is sold as a spare parts carrier. All boards and the computer and screen are OK Cueqqqgk

Listing

Gransee

7898 km

Wire eroding machines

AGIE Agiecut AC 100

1988

good (used)

€6,500

Call

AGIE AGIECUT 100 type AC100/87 serie 122 Machine tool AGIECUT 100 Generator - AGIEPLUS-MM Machine control - AGIEMATIC -C Dielectric aggregate – DA-15/AF Working table; length 560 mm , width 445 mm Max. dimensions of work piece; length 810 mm, width 580 mm, height 250 mm Table load max; 200 kg B3ttnnt Height of work support over ground; 800 mm Longitudinal traverse (X-axis); 300 mm Cross traverse (Y-axis); 200 mm Rapid traverse; 30 mm/min Diameter of electrode wire...

Listing

Nürtingen

7970 km

Wire cutting

AGIE Challenge 2

2001

refurbished (used)

Call

AGIECUT Challenge 2 Guwrgib Year of manufacture 2001 travels (X/Y/Z): 350 x 250 x 256 mm travels (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Max. Cutting rate in cylindrical cut: 300 mm²/min Available wire diameters 0.15 - 0.33 mm: Incl. AGIE universal clamping frame; Incl. AGIE JOGGER handbox; The machine will be cleaned, over...

Listing

Oberkotzau

8014 km

AGIE 250HSS

1995

good (used)

Call

Operating hours: approx. 165065, eroding hours. approx. 30000 travels X-Y-Z 400 x 250 x 250 mm; taper: travels +/- 30mm in U/V axes surface quality Ra 0,3µm ( wire diameter 0,25mm) wire diameter 0,1; 0,15; 0,2; 0,25; 0,3mm possible Accessories: Wire straightener Manuals Storage media Spindle correction, Final Config Special features: Readjustment of the complete telescopic unit incl. eroding heads Pmvch Further services are included: Disassembly and loading of the machine. Gu...

Listing

Nürtingen

7970 km

AGIE Progress 2

2004

refurbished (used)

Call

AGIECUT Progress 2 Year of manufacture 2004 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm travel distances U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethread...

Listing

Oberkotzau

8014 km