New Arrivals
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Ddkdfl7 CHARMILLES Robofil 290F Wire EDMSpecifications:X Axis Travels 15.7”Y Axis Travels 9.8”Z Axis Travels 7.87""U Axis Travels 15.7”V Axis Travels 9.8”Maximum Workpiece Weight 1,100 LbsMaximum Workpiece Size 33.5” X 19.7” X 7.87”Wire Diameters .004”-.012”Wire Spool Size 17.7 LbsTaper Capacity 0-30 DegreesMachine Size 71” X 63” X 87.8”Machine Weight 5,500 LbsEquipped With:Fanuc Control... more
6

Wire Eroding Machine AGIE AGIECUT-EVOLUTION 3

Düsseldorf Germany
6383 km
1998
used
Offer
Another 5 days
Weight approx.: 5000 kg Bazsxscnkm Dimensions (l x w x h) approx.: 2800 x 2400 x 2220 mm Description: Series plant 0093, plant list C 31001.8, plant net weight 4500 kg, operating weight 6000 kg, max. workpiece dimensions 1050 x 650 x 250 mm, workpiece weight with bath 400 kg, without bath 800 kg, traverse paths X 500 mm, Y 350 mm, Z 256 mm, rapid traverse 1500 mm/min, rapid traverse U/V/Z 600 mm, AGIEJET wire threading system threadable height up to 250 mm, for wire diameter 0.1 - 0.33 mm, wire... more
5
table length 1100 mm table width 1000 mm ampere 45 A Control Agiematic capacity X-axis 700 mm capacity Y-axis 400 mm capacity Z-axis 406 mm wire dia. 0,1- 0,3 mm Galco32da total power requirement 60 kW weight of the machine ca. 7,6 t dimensions of the machine ca. 2,8 x 2,3 x 2,6 m max. workpiece weight 2000 kg Machine has automatic wire threat in and V/U axes. more
Travel axes [ X x Y x Z ]: 500 x 350 x 250 mm max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm Na9wz max. workpiece weight: 850 kg with AWF ( Automatic Wire Feeding ) submerged U-/V-: +/- 80 x 80 mm max. taper cut: +/-15° with 120 mm control: LN2W more
6
State: Machine will be sold refurbished. X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Mweuh Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change. more
6
Jig electrode changer with a linear Guide system Birwiyus Control: Agiematic T-control - color screen and programming cycles measurement/geometry Technical data: Positioning range x 500 mm, Y 350 mm, Z 500 mm C-axis - to 40 RPM. Pulse generator type HSF, 60 A Electrode changer: 28 shots in the disc magazine Maximum weight of electrodes 10 kg Work piece clamping table: Size 800 x 600 mm maximum work-piece weight of 800 kg Distance sleeve/table min. 200 m... more
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Wfcn0k MITSUBISHI FA-10S CNC Wire EDM Travels 13.8” x 9.8” x 8.7” (350 x 250 x 220 mm). -- U-axis +/-1.3” (+/-32 mm). -- V-axis +/-1.3” (+/-32 mm). -- Table size 23.2” x 20.2” (590 x 514 mm). -- Max. part size 31.5” x 23.6” x 8.5” (800 x 600 x 215 mm). -- Max. operating part thickness 8.4” (213 mm). -- Max. taper angle 15 degrees. -- Min. wire diameter 0.004” (0.1 mm) -- M... more
5
x-travel: 1000 mm y-travel: 600 mm z-travel: 400 mm Weight approx.: 4600 kg Dimensions (l x w x h) approx.: 4200 x 2850 x 2600 mm Description: ONA PD 4.120 EO Die Sinking EDM Machine Bbk7tzjjai - tank size: approx. 1950 x 1000 mm - max. table load: 4000 kg - max. electrode weight: 400 kg - with sixfold tool changer - for further information see pictures In Online Auction with approx. 49 further Machine Tools and other Assets! Bidding ends: Wednesday, 07 March 2018 from 10am (local time) ... more
5
table length 1100 mm table width 1000 mm ampere 45 A Control Agiematic capacity X-axis 700 mm capacity Y-axis 400 mm Ptm2ru capacity Z-axis 406 mm wire dia. 0,1- 0,3 mm total power requirement 60 kW weight of the machine ca. 7,6 t dimensions of the machine ca. 2,8 x 2,3 x 2,6 m max. workpiece weight 2000 kg Machine has automatic wire threat in and V/U axes. more
1
table length 600 mm Qnuwy7mq8 table width 600 mm ampere A dimension of workpiece 550 x 600 x 260 mm workpiece weight 650 kg x-axis 300 mm y-axis 450 mm voltage 380 V wire diameter - min. 0,05 mm wire diameter - max. 0,33 mm wire-forward-feed 250 mm/sec CNC-control LEI WIRE CUT MITSUBISHI total power requirement kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,75 x 1,90 x 1,95 m CNC Control MITSUBISHI LEI WIRE CUT Conical cutting device autom. wire feed unit more
1
State: Machine cleaned and working. X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: ABOUT 16'000HRS 8c7irg2ef The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change. more
4
Drahterodiermaschine -gebraucht- Hersteller: Agie Typ: Agiecut Sprint 70 Steuerung: Agiematic CF Elektroink: Agiematic CF50 / Typ DA-18 Arbeitsbereich: X 300mm Y 200mm Z 224mm Gewicht: 1.865kg Bbjsdxfccj sofort verfuegbar, zu besichtigen! ***Aenderungen und Irrtuemer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten!*** more
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Baq7pwxvud SODICK AG55L LP10 Sinker EDM -- Travels 21.6"" x 15.7"" x 13.7"". -- Table size 23.6"" x 15.7"". -- Work tank inside dimensions 37.4"" x 28.5"" x 13.7"". -- Maximum workpiece weight 2,200 Lbs. -- Maximum electrode weight 110 Lbs. -- Machine dimensions 67.5"" x 102"" x 107"".Equipped with: -- LP10 CNC control. -- Linear motors on all axes. -- Dielectric filtration system. -- Automatic temperature control unit (Freon chiller). -- 5 posi... more
6

Die Sinking EDM Machine ONA Datic D-360-F

Düsseldorf Germany
6383 km
1996
used
Offer
Another 25 days
x-travel: 600 mm y-travel: 400 mm z-travel: 300 mm Table dimensions l x w: 650 x 400 mm Weight approx.: 3600 kg Dimensions (l x w x h) approx.: 3000 x 3000 x 2600 mm Bbjnsjhitb Description: -Fab. No. 6848/9504 -4-axis C 360 degree -travels Z/X/Y axis: 300/600/400 mm -Work table dimensions: 650 x 400 mm -Accuracy: 0,001 -Massive electrode erosion ( Graphite/Copper) -Automatic control -Automatic gas filter, with regenerator filter, cleans the single filter and removes the waste separately ... more
Procedures: x 500 mm y 350 mm z 300 mm Maximum workpiece dimensions (W x D X H) mm 1050 x 800 x 295 Automatic wire Threading Water bath Na0b2 incl. cooler more
1
table length 400 mm table width 250 mm ampere 60 A table travel longitudinal 300 mm table travel cross 200 mm voltage 380 V total power requirement kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,20x1,60x2,45 m Tgo7g8onz We maintain an extensive stock of spare parts of NASSOVIA machines. Operator training, commissioning and installation of the machine can be provided at extra-charge. more
5
State: Machine will be sold refurbished Chuck type: Electrode changer: X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): CNC Type: 8c7h8ep3d Worktank length: Worktank width: Worktank height: Table length: Table width: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight (kg): Max. machining current (A): Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteri... more
5
table length:560 mm table width:380 mm ampere:13 A workpiece weight:max:350 kg x-axis:350 mm Xbvdpl0bt y-axis:250 mm z-axis:300 mm generator - rated current:64 A workpiece height:200 mm electrics - voltage/frequency:380/50 V/Hz spindle nose:540 mm total power requirement:9,5 kW weight of the machine ca.:2,4 t dimensions of the machine ca.:2,05 x 3,3 x 2,50 BxLxH m DOCUMENTATION available more
1
Elect./Voltage: 208/230/440/480, 60 Cy, 3 Ph Bbhydukdpv VERSAMAX FHD56C CNC EDM Drill (Hole Popper) -- Travel 23.6” x 19.7” x 17.7”. -- W-Axis travel 11.5”. -- Maximum workpiece dimensions 31.5” x 29.5”. -- Maximum workpiece weight 2,866 Lbs. -- Electrode size range 0.3mm – 3.0mm (0.0118"" - 0.1181""). -- Approximate dimensions 6' x 5'6"". -- Approximate weight 4,500 [...] with: -- 30 Amp power supply. -- Fully submerged operation. -- Integr... more
6

Machine d'Electro-Erosion FANUC ROBOCUT ALPHA-OIC

Düsseldorf Germany
6383 km
2006
used
Offer
Another 10 days
Weight approx.: 1500 kg Dimensions (l x w x h) approx.: 2100 x 2050 x 2100 mm Description: CNC-controlled wire eroding machine with the following travel paths: X = 320 mm, Y = 220 mm, Z-axis 255 mm, U- and V-axis +/- 60 mm, max. workpiece weight 500 kg, max. workpiece dimensions 700 x 600 x 250 mm, machine has a FANUC CNC-control series 180 IS-WB, see photos for details, dimensions approx. 2100 x 2050 x 2100 mm, weight approx. 1300 kg, including workbench, tabletop approx. 1500 x 700 mm, with 3 ... more
2
Agiepuls 30 travel X/Y/Z 250/1060/200 mm Bgtdyiiq table size 420x250 mm weight 1080 kg more
3
table length 550 mm table width 550 mm throat 180 - 640 mm quill stroke 80 mm voltage 220 V coolant total power requirement 5 kVA weight of the machine ca. 130 kg dimensions of the machine ca. 0,55 x 0,95 x 1,70 m 2ps3je - Serial-No.: 5338 - coolant equipment more
6
State: Very good condition. PRICE 50'000 CHF (EXW) Gvi3wo Machine  Work table size (WxD): 600x400 mm  Work tank inner dimensions (WxDxH): 750x550x320 mm  Work tank fluid level (min to max): 95-270 mm  Work tank capacity: 112 l  X axis stroke: 350 mm  y axis stroke: 250 mm  Z axis stroke: 250 mm  Max workpiece weight: 550 kg  Max electrode weight: 50 kg  Distance from floor to table top: 850 mm  Machine dimensions: 1535x2210x2395 mm  Machine weight: 3900 kg  Power input : 3X400V 50/60 Hz 8kVA ... more
6
Machine is in an exeptionel good condition and under power CT 1000 clamping system, see photo Bbh720ayk9 Ciller, see photo more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Gbcfsa2qq MITSUBISHI BA-24 CNC WIRE EDM -- Max workpiece dimensions 41.3"" x 32.3"" x 12"". -- Max weight of workpiece 3,300 Lbs. -- Table size 34.6"" x 26.8"". -- Travels 23.6"" x 15.7"" x 12.2"". -- U/V-Axes 3"". -- Max. taper angle 15° 10.2"". -- Rapid traverse 51 IPM. -- Wire diameters 0.004"" - 0.012"". -- Machine size 111 x 106"" x 90.5"". -- Approx. machine weight 9,200 Lbs. Equipped with: -- V-350 64 Bit CNC control. -- Automatic w... more
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close