Used Edt for sale (291)

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER MODEL ST-75ES MANUFACUTRED 2015 Hodpfx Adexmthre Rsfg TWIN 40 HP MOTORS DUTTING CHAMBER OF 956mm/37" X 635mm/25" DISCHARGE HEIGHT 1,067mm/42" THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE.

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Hfsdpfxjxd D Nze Ad Reg

Condition: used, Year of construction: 1971, functionality: fully functional, turning diameter over bed: 900mm turning diameter over slide rest: 800 mm Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 min-1 Hsdpfx Adsy Snkne Rofg dimensions (LxWxH), approx.: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements The main spindle box was completely overhauled approx. 10 years ago. The vibration-damping elements are included in the scope of delivery. The machine is from the original owner.

Condition: excellent (used), Make: HEYLIGENSTAEDT Type: NDC 710 / 1800 Control: R&D MTC3 4 Chuck 1400 mm Steady rest 3 units Ø 100-1050 Roller steady open 2 units Ø 1120 KNOLL Chip conveyor 2022 Boring bar Ø 260 x 3500 mm Boring bar Ø 200 x 1500 mm Boring bar Ø 150 x 1100 mm DBC Turning Length: 8250mm Swing over bed Ø: 1400mm Hfsdpfx Ajwzh A Aed Reg Swing over cross slide Ø:1120mm Spindle power: 100kW Workpiece load: 16000 Length: 14000mm Width: 3500mm Height: 2900mm Weight: 32000kg

Condition: used, Year of construction: 1971, swing diameter 0520 mm 4-jaw-chuck diameter 500 mm faceplate 800 mm turning diameter over bed slide 400 mm turning dia. in gap 1000 mm turning length 1250 mm turning speed range - spindle 11,2 - 1120 U/min total power requirement 7 kW Hfodpfx Adjy Nd S Ao Rjg weight of the machine ca. 3,8 t dimensions of the machine ca. 2,7 x 1,7 x 1,7 m Machine has a 4 position toolholder with quick change device and DRO.

Condition: used, Heavy-duty lathe Heyligenstaedt 1850 x 12,000 mm Manufactured by Heyligenstaedt & Comp. in Giessen, Germany. Machine Specifications The data plate provides specific technical parameters for this particular unit: • Model/Type: ND2a - 900 • Dimensions: (63 × 12,000) (Likely referring to spindle bore or swing over bed and a total bed length of 12 meters) • Year of manufacture: 1980 General Technical Capabilities Heyligenstaedt machines in this class are designed for extra-large precision and heavy-duty machining of massive workpieces. Typical specifications for the ND2a-900 series include: • Swing diameter over bed: 1,850 mm • Approx. 900 mm from bed to spindle/chuck center (as indicated by the '900' in the model designation) • Swing diameter over carriage: 1,400 mm • Turning length: up to 12,000 mm (12 meters) • Speed range: Older heavy-duty models typically operate at lower RPM for high torque, often between 4 – 710 rpm Hfodpfx Adsy Skzce Rsg • Main spindle drive: High-capacity motors typically rated at over 100 kW for powerful metal removal • Workpiece weight capacity: Can accommodate loads up to several tons, with larger custom-made machines supporting workpieces up to 180,000 kg Design Features • Bed: Robust 4-guideway bed made from grey cast iron for maximum damping properties and rigidity

Condition: used, Year of construction: 2023, Book‑Edge Printer / Printer with Book Transport System Application: Printing on book edges (1–3 sides) with colors, patterns, designs, motifs, and photos; full‑bleed edge printing with overprint and wiper/blade system. Applications / Use Cases: Hardcover books, softcover books, book blocks with flat or rounded spines, calendars, special and limited editions. Performance Output: approx. 300 books/hour (with 3‑side printing) Hjdpfx Aey Hryied Rjfg Print speed: 160 mm/s Book / Block Dimensions Block width: 100–330 mm Block height: 100–330 mm Block thickness: 5–210 mm Printing Technology Technology: High‑resolution inkjet printing Resolution: 1200 × 1200 dpi Color system: CMYK Ink type: Water‑based pigment ink Machine Dimensions & Weight Dimensions (W × D × H): approx. 142 × 80 × 105 cm Weight: approx. 100 kg

Condition: used, machine/vehicle number: 007997, Max. panel width: 1000 mm Max. panel length: 2200 mm Max. panel stack height from the ground: 1600 mm Lifting capacity: 20 Kg Work capacity: 12 Cycles/min Hfodpfoy Nkwxox Ad Rog Movement system: suction cups.

Year of construction: 1999, condition: used, Computer-controlled hot foil embossing machine Schmedt Präzimark PMK 203 with a large number of type wheels, e.g: 563 / 610 697 - 2DP. / 635 564 / 667 610 / 16.. / 634 Hedpfjwvtqnex Ad Rofg 631 / 169 / 4,3 562 / 697 632 / 697 561 / 695 691-24P / 633 564 / 667 610-16P / 634 631 / 691 / 4,3 Technical data: Machine L x W x H: 850 x 630 x 765 mm Control cabinet L x W x H: 135 x 370 x 665 mm Space requirement L x W x H (machine only): 1200 x 890 x 1100 mm Weight, including control cabinet: 80 kg Power type: Alternating current, 1 phase Frequency: 50 Hz Voltage: 230 V Rated current: 2.0 A Output: 0.6 kW Fuse in the supply line: 10 A Cross-section of the supply cable: 1.5 mm² Length of connection cable: 2 m Pneumatic pressure: 0.6 min MPa

Condition: used, machine/vehicle number: 008347, Max. panel width: 1200 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1600 mm Hfodpfsyngzpox Ad Rog Lifting capacity: 50 Kg Work capacity: 18 Cycles/min Movement system: suction cups.

Condition: used, machine/vehicle number: 005107, Stock dimension length: 18800 mm Hedpfx Aoiiipuod Rjfg Stock dimension width: 15000 mm

Condition: good (used), Year of construction: 1965, functionality: fully functional, Turning length/centre distance: 4m, spindle bore diameter, faceplate D 1000 mm, centre height over carriage 360 mm, 2 steady rests with roller jaw guides retrofitted in 1980, main spindle speed 215 - 355 rpm. Operating manual with wiring diagram, chip guard, quick-change toolholder, carriages recently overhauled, electric control box, weight approx. 15 t. Inspection possible under power, including test run. Hjdpfxoy Ehnts Ad Refg

Condition: good (used), Schmedt PräLeg HHS 1805 Case in machine This machine is in very good condition. Manufactured by Schmedt, Germany. The machine suspends book blocks into pre-cut hardcovers. Two gluers with smooth glue thickness adjustment. The machine comes with full documentation and a CE certificate. Format: Block height: 80–340 mm Block width: 110–450 mm Block thickness: 2–80 mm Hfedpfx Adsy Hglgs Rsg Capacity: approximately 200–300 pcs/h Power supply: 230V + compressed air. Weight: 300 kg

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Hjdpfx Aex A Hggsd Refg Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Condition: used, Year of construction: 1957, turning diameter over bed 800 mm turning diameter over slide rest 540 mm turning length 4000 mm centre height 400 mm centre distance 4000 mm spindle turning speed range 9 - 1140 U/min spindle passage 96 mm weight of the machine ca. 8,5 t dimensions of machine L x W x H 7,0 x 1,70 x 1,70 m - with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, Hfjdoxwp Ehopfx Ad Rsg faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolant

Condition: good (used), Schmedt PraForm HHS 20 Book Press Book press with groove burner. Very good condition. The machine came from a school. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 350 x 380 x 110 mm Weight: 250 kg Power supply: 380V Hjdpfxoy Ehm No Ad Refg Flexible temperature control.

Condition: good (used), Schmedt PraForm HHS 2100 Book Press Book press with groove cutter. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 400 x 520 x 100 mm Weight: 250 kg Power supply: 380V + compressed air. Hfsdpfxjy Ehmpo Ad Rog

Condition: used, Year of construction: 2008, Format: 355 x 760 mm Equipment: Technical data: Hfsdpfx Adjyxqv Ts Reg Minimum envelope size: 100 x 216 mm Maximum envelope size: 355 x 760 mm

Condition: used, Year of construction: 2021, Format: 0x0 Equipment: Mechanical speed: 250 pieces/hour Hfedeyxqwwjpfx Ad Rjg

Condition: used, Year of construction: 2021, Format: 0x0 Equipment: Hodpfx Adjyxqwdj Rsfg Mechanical speed: 150 pieces/hour

Condition: used, Year of construction: 2016, Format: 0x0 Equipment: Hfjdpfx Aoyxqw Ded Reg Maximum mechanical speed: 250 pieces/hour

Condition: used, Year of construction: 2021, Format: 0x0 Hjdpfx Adsyxqv Ho Refg Equipment: Speed: Machine output: 360 cycles/hour

Condition: used, Year of construction: 2021, Format: 0x0 Equipment: Hfodpfx Adeyxqw Rj Rjg Mechanical speed: 300 cycles/hour

Condition: used, Year of construction: 2016, Format: 0x0 Hfjdpfjyxqwksx Ad Rsg Equipment: Mechanical speed: 250 pieces/hour

Condition: used, Year of construction: 2006, greates pass round over bed 960 mm swing diameter over bed slide o: 860 / u: 730 mm turning diameter over bed slide o: 860 / u: 400 control SIEMENS - 840 D Hfjdpfx Aoxcbkmsd Rsg forward bearing diameter 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000