Used Edt for sale (294)

Condition: used, Year of construction: 2021, Format: 0x0 Speed: 150 pieces per hour Power: 230 V (A.C.), 50/60 Hz Net Weight: 45 kg Measurements: (LxWxH): 50 x 75 x 35cm Equipment: Mechanical speed: 150 pieces/hour pneumatic drive height adjustable table Hodpoyxqwdofx Ak Ujnu heating plate for preheating glued bindings movable plate heated rounding book block thickness of 8-80 mm book block height max. 520 mm

Condition: used, Year of construction: 2016, Format: 400 x 770 mm Power: 230V / 400V Net Weight: 350 Kg Measurements: (LxWxH):105 x 135 x 130cm Equipment: Mechanical speed: 250 pieces/hour Blank Sheet Width: Minimum 250 mm to Maximum 770 mm Hodpfx Akoyxqwko Usnu Blank Sheet Height: Minimum 150 mm to Maximum 400 mm Allowable Board Thickness: From 1.5 mm up to 3.5 mm thick rigid greyboard Cutting Width (Horizontal): Adjustable from a narrow minimum of 6 mm (perfect for thin hardcover book spines) up to a maximum width of 700 mm. Cutting Height (Vertical): Adjustable from 127 mm up to 355 mm. Automatic 3-Panel Segmenting Automated Material Lift & Feed Integrated Sheet Transport Conveyor Heavy-Duty Rotary Shear Knife Block Digital Operator Display Panel Maximum Sheet Feed Capacity: Accommodates a raw board thickness range commonly spanning 1.0 mm up to 4.0 mm

Condition: used, Year of construction: 2021, Format: 530 mm Power: 1500 W Net Weight: 150 kg Measurements: 100 ?? 50 ?? 75 cm (Width ?? Hjdpeyxqwwefx Ak Ujnu Equipment: Mechanical speed: 250 pieces/hour Rotating Doctor Blade System Integrated Viskositaetsoptimierung (AVC) Programmable Pre-Heat Timer Top-Side Sheet Transport Control Maximum Working Width: 53.0 cm (530 mm / ~20.8 inches). It easily takes oversized SRA3 digital sheets or long banner covers fed horizontally. Substrate Capabilities: Optimized for delicate digitally printed sheets, high-gloss laminations, heavy textured cover stocks, and woven book cloths.

Condition: good (used), Year of construction: 2002, turning length: 6,000 mm, spindle bore: 122 mm, travel distance X-axis: 90 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 6,110 mm, rotational speed (max.): 2,200 rpm, total height: 3,300 mm, total length: 16,000 mm, total width: 5,300 mm, overall weight: 32,000 kg, Multi-tasking lathe HEYLIGENSTAEDT - Heynumat 35/6000 MACH-ID 9643 Make: HEYLIGENSTAEDT Type: Heynumat 35/6000 Control: SIEMENS 840D Max. turning Ø: 890mm X-Axis: -10 to +490mm Y-Axis: -130 to +300mm Z-Axis: -180 to +6110mm Spindle bore: 122mm Speedrange: 2200Rpm Spindle power: 80kW ATC / revolver: 100 Hjdozclqlepfx Ak Uonu B-Axis Toolsystem:Capto C8 Sandvik B-Axis Speedranges:2200Rpm B-Axis power: 28kW Length: 16000mm Width: 5300mm Height: 3300mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, power: 107 kW (145.48 HP), first registration: 03/2023, fuel type: diesel, wheelbase: 3,750 mm, fuel: diesel, fuel tank capacity: 100 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro4, total length: 6,750 mm, total width: 2,380 mm, total height: 3,200 mm, loading space length: 3,900 mm, loading space width: 2,200 mm, loading space height: 2,050 mm, Year of construction: 2023, = Additional Options and Accessories = - Automatic heating system Hnedpfx Aszqdtgek Ueu = Notes = Fuel tank: 100 liters Without air conditioning Equipped with refrigerated box: Thermo King T600 R50 400V diesel/electric Laminar panels, floor 120 mm, roof 100 mm, front 100 mm, rear 84 mm, sides 71 mm. Double rear door with external locks, right panel opens first + 3-step ladder. Internal lighting, 1 LED lamp set in ceiling. Steel intermediate frame, galvanized. Internal dimensions: 390 x 220 x 205 cm, 17.58 cubic meters Refrigeration unit brand: Thermo King = Further Information = Transmission: 6-speed 400, 6 gears, manual transmission Number of cylinders: 4 Engine displacement: 2,998 cc Unladen weight: 3,600 kg Payload: 1,400 kg GVW: 5,000 kg Body brand: Thermo King T600 R50 400V Refrigeration engine: Diesel and electric Wall thickness: 12 mm

Condition: used, Year of construction: 2023, Book‑Edge Printer / Printer with Book Transport System Application: Printing on book edges (1–3 sides) with colors, patterns, designs, motifs, and photos; full‑bleed edge printing with overprint and wiper/blade system. Applications / Use Cases: Hardcover books, softcover books, book blocks with flat or rounded spines, calendars, special and limited editions. Performance Output: approx. 300 books/hour (with 3‑side printing) Print speed: 160 mm/s Hnsdpfey Hryijx Ak Uju Book / Block Dimensions Block width: 100–330 mm Block height: 100–330 mm Block thickness: 5–210 mm Printing Technology Technology: High‑resolution inkjet printing Resolution: 1200 × 1200 dpi Color system: CMYK Ink type: Water‑based pigment ink Machine Dimensions & Weight Dimensions (W × D × H): approx. 142 × 80 × 105 cm Weight: approx. 100 kg

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Hnjdpfxsz N Skcs Ak Uju Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: excellent (used), Year of construction: 2013, Ref:11118 . 2013 Schmedt Präleg & Präform Casing-in & Pressing Machines. Hnsdpfx Akezkgdzo Uou For casing-in a variety of thin to thick books into flexible or hard cases. Special features:- • Programme selection via touch-screen monitor • Very short set-up and strip down times • Auto wash-up of glue rollers after each book Vertical wing action Twin PVA cold glue tanks Working in conjunction with:- 2008 Schmedt Präform 2100 Pressing & Joint Forming Machine. For pressing a variety of thin to thick hard cover books immediately after casing-in. Suitable for single or assorted books, pressing & burning in the joint in a single operation. Specification, Praleg 18-60: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Specification, PraForm 2100 Book press with groove cutter. Maximum format: 420 x 520 x 100 mm Power supply: 230 V + compressed air.

Condition: good (used), Schmedt PraCut 6501 Notching Machine Very good condition, ready to work. A machine for cutting the spine to increase the area of ​​glue application and to cut the spine fold. This makes the block much more durable and binding becomes faster. Manufactured by Schmedt, Germany. Technical data: Hnsdpfsz N Si Ejx Ak Uju Book block thickness: up to 90 mm Book block height: up to 350 mm Requires air supply Power supply: three-phase 380V Productivity: about 250-350 pieces per hour.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Control: Heidenhain TNC 430 Hodpfxsyaazmj Ak Usnu X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm In 2018, the Heynumill underwent a complete overhaul of the hydraulic system, replacement of all electrical cables, renewal of the spindle cooling unit, both longitudinal conveyors were replaced, and the milling heads were completely refurbished. The entire refurbishment cost €160,000. In 2020, the milling gearbox was renewed.

Condition: new, Empty weight: 75.000 kg Dimensions (LxBxH): 825 x 825 x 2084 cm Cargo space capacity: 740.000 l Wall thickness: 8 mm Aerial platform: Yes Thickness of end walls: 6 mm Thickness of partition walls: 5 Number of fillers: 2 SILO CAPACITY 1.000 TONS SILO HEIGHT 20840 mm SILO DIAMETER Ø 8250 mm QUANTITY OF SILO LEGS 8 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 191 SILO WEIGHT 72000 kg(With Legs:75 000kgs) MATERIAL OF SILO LEGS Ø273 x 10 mm STEEL PIPE SUPPORTS OF SILO LEG 100 mm C CHANNEL SHEET METALS OF SILO LEG 25-30 mm CONICAL PART SUPPORT MATERIAL 160 mm STEEL C CHANNEL CONICAL PART MATERIAL S235JR, 10 mm SHEET METAL SILO BODY MATERIAL S235JR, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL S235JR, 5 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS Hnjdpfx Ajygtgvok Usu MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS.

Condition: new, Empty weight: 75.000 kg Dimensions (LxBxH): 825 x 825 x 2084 cm Cargo space capacity: 740.000 l Wall thickness: 8 mm Aerial platform: Yes Thickness of end walls: 6 mm Thickness of partition walls: 5 Number of fillers: 2 SILO CAPACITY 1.000 TONS SILO HEIGHT 20840 mm SILO DIAMETER Ø 8250 mm QUANTITY OF SILO LEGS 8 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 191 SILO WEIGHT 72000 kg(With Legs:75 000kgs) MATERIAL OF SILO LEGS Ø273 x 10 mm STEEL PIPE SUPPORTS OF SILO LEG 100 mm C CHANNEL SHEET METALS OF SILO LEG 25-30 mm CONICAL PART SUPPORT MATERIAL 160 mm STEEL C CHANNEL CONICAL PART MATERIAL S235JR, 10 mm SHEET METAL SILO BODY MATERIAL S235JR, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL S235JR, 5 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT Hnjdoylhc Aepfx Ak Uju OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS.

Condition: new, Empty weight: 18.600 kg Dimensions (LxBxH): 365 x 365 x 2500 cm Cargo space capacity: 220.000 l Wall thickness: 6 mm Thickness of end walls: 5 mm Thickness of partition walls: 4 Number of fillers: 2 1. SILO CAPACITY: 2000 TONNES 2. SILO HEIGHT: 258110 mm(With 3 Meters Concrete Frame) 3. SİLO DIAMETER: Ø 12 300 mm 4. QUANTITY OF SILO LEGS: 4 5. SILO OUTPUT DIAMETER: Ø 500 mm 7. SILO WEIGHT: 110 600 kg 8. MATERIAL OF SILO LEGS: Ø500 x 18 mm STEEL PIPE 9. SUPPORT OF SILO LEGS: NPL 80 mm 10. SHEET METALS OF SILO LEG: 20-25 mm 11. CONICAL PART SUPPORT MATERIAL: 100 mm STEEL C CHANNEL. 12. CONICAL PART MATERIAL: ST- 37, 6 mm SHEET METAL(S265) 13. SILO BODY MATERIAL: ST -37, 5-4 mm SHEET METAL 14. TOP COVER MATERIAL OF SILO: ST -37, 4 mm SHEET METAL. 15. INNER MAN HOLE IS NCLUDED.(Optional) 16. OUTER MAN HOLE IS INCLUDED. 17. SILO ROOF INCLUDES PAREPETS. 18. MAINTENANCE PLATFORM IS INCLUDED. Hsdpfxsx D A Suj Ak Uenu 19. CHARGING PIPE: 4’’ PIPE UP TO SILO LEG. 20. PLATFORMS AND SERVICE LADDER FOR PLATFORM GALVANISED PNEUMATIC AND ELECTRICAL CONNECTION PERFORMED Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 125- 140 microns

Condition: used, mileage: 195,850 km, power: 235 kW (319.51 HP), first registration: 06/2019, fuel type: diesel, wheelbase: 5,150 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space length: 6,500 mm, loading space width: 2,450 mm, loading space height: 800 mm, Year of construction: 2019, Equipment: crane, retarder, Intended uses: Construction and road construction Hjdpfxjzyz Imo Ak Uenu Crane: HIAB X-HiPro 162 E4, year of manufacture 2019, mounted behind the cab APK (technical main inspection): valid until 06/2027 Technical condition: very good Optical condition: good

Condition: used, Year of construction: 1999, total length: 13,000 mm, total width: 7,000 mm, total height: 6,000 mm, overall weight: 120,000 kg, spindle motor power: 50,000 W, HEYLIGENSTAEDT HEYMUNILL 3200-P in heavy-duty portal design with fixed crossrail, suitable for machining large and heavy workpieces. Large working area with travels of X 6,000 mm / Y 5,000 mm / Z 1,500 mm, as well as a table size of approx. 5,000 x 3,000 mm and a table load capacity of approx. 50,000 kg. Portal clearance approx. 3,220 mm width / 2,050 mm height. 5-axis machining / milling heads A- and B-axis (swivel axes in the milling head) C-axis (360° rotation) Simultaneous 5-axis machining possible (with fork head) Milling heads: Straight milling head FK 120/340 90° angle head WFK 100/750M Fork head FK 100/2D Milling head magazine: 5 positions Automatic milling head change Additional equipment: Internal cooling (IKZ) approx. 7 bar Tool changer 32 positions (SK50, Fibro ATC 32/50) Tool holder SK50 (DIN 69871) Tool measuring system (laser) Chip conveyor Coolant system Adaptive feed control Heidenhain linear scales X/Y/Z Spindle performance: 50 kW Control: Heidenhain TNC 430 Spindle speed: 5000 - rpm Travel Y-axis: 5000 - mm Dimensions (LxWxH) approx.: 13000 x 7000 x 6000 mm Weight approx.: 120,000 kg Hnodpfx Aksy Anrts Uju Travel Z-axis: 1500 - mm Travel X-axis: 6000 - mm Year of construction: 1,999 Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Hnjdex A Hggopfx Ak Uou Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Condition: good (used), turning length: 5,038 mm, spindle motor power: 80,000 W, spindle bore: 122 mm, travel distance X-axis: 490 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 5,038 mm, total height: 3,300 mm, total length: 16,000 mm, total width: 4,900 mm, overall weight: 30,000 kg, Multi-tasking lathe HEYLIGENSTAEDT - Heynumat 35/5000 MACH-ID 9642 Make: HEYLIGENSTAEDT Type: Heynumat 35/5000 Control: SIEMENS 840D Max. turning Ø: 890mm X-Axis: -10 to +490mm Y-Axis: -130 to +300mm Hjdpozcmzxjfx Ak Uenu Z-Axis: +180 to -5038mm Spindle bore: 122mm Speedrange: 2200Rpm Spindle power: 80kW B-Axis Toolsystem:Capto C8 Sandvik B-Axis Speedranges:2200Rpm B-Axis power: 28kW Length: 16000mm Width: 4900mm Height: 3300mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, Format: 355 x 760 mm Max. Paper Thickness: NULL Power: 230 V / 50 Hz / 10 A Hedpfjyxqv Tox Ak Usnu Net Weight: 230 kg Measurements: (LxWxH):77 x 122 x 117cm Equipment: Technical data: Minimum envelope size: 100 x 216 mm Maximum envelope size: 355 x 760 mm Sensor-Driven Automatic Setting Two-Stroke Case Completion Integrated Rubber Matrix Roller Pressing Touchscreen Interface (UI) Single-Operator Design Supported Spine Width Capacity: Smoothly adjusts from 6.4 mm up to 82 mm thick. Allowable Board Thickness: Formatted for rigid cardboard ranges from 1.5 mm to 3.5 mm thick. 200 to 220 finished hardcases per hour

Condition: new, power: 132 kW (179.47 HP), fuel type: diesel, empty load weight: 2,235 kg, maximum load weight: 1,265 kg, overall weight: 3,500 kg, tire size: 215/75R16C, axle configuration: 4x2, wheelbase: 4,035 mm, CO₂ emissions: 166 g/km, fuel consumption (urban): 7.7 l/100km, fuel consumption (extra-urban): 5.9 l/100km, fuel consumption (combined): 6.6 l/100km, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 6,363 mm, loading space volume: 15 m³, loading space length: 4,070 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, Year of construction: 2026, front tire size: 215/75R16C, rear tire size: 215/75R16C, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, low noise, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, Fiat Ducato L5H2 panel van (now L4H2 in Series 10) high roof, 2.2MJ 132KW/180PS, new vehicle in stock, immediately available. Latest model of Series 10 (9.2)! Syncom: 295.CG5.2. Paint: 549 white. MAXI version with 16-inch tires and large brake system. Towing capacity: 3,000 kg. Cargo area dimensions: 4,070 x 1,870 x 1,932 mm (l x w x h). Cargo volume: 15 m3. Gross vehicle weight: 3,500 kg. Smart tachograph: digital tachograph (VDO DTCO 4.1) retrofitted. 025 air conditioning. 2PX 5'' infotainment system with color display, DAB radio, Bluetooth interface. 316 rearview camera. 245 radio remote control on the steering wheel. 835 storage compartment in the roof. 38C package ''Visibility Plus''. 9WE full LED headlights. 051 rain and light sensor. LPZ fog lights with static cornering lights. C7C PACKAGE ''PREMIUM CAB'' with comfort driver's seat. 640 comfort driver's seat, hydraulically sprung with armrest (suspension seat). 0XW dashboard ''Techno''. 320 steering wheel and gear lever made of artificial leather. 50E seat base trim. 8RS seat cover, black with double stitching. NHR cruise control with speed limiter. 049 steel partition. 077 double leaf spring rear axle. 041 electrically adjustable and heated exterior mirrors. 508 rear parking sensors. 293 double passenger seat with table. 132 comfort driver's seat with armrest + lumbar support. 500 driver airbag. 502 passenger airbag. 5F4 safety package: electronic stability control: - side wind assist - trailer stability control - post-collision braking - rollover mitigation - anti-slip control (ASR) - hydraulic brake assist (HBA) - hill-start assist - adaptive load control (LAC). Safety kit: - emergency brake assist (pedestrian and cyclist detection) - lane keeping assist - traffic sign recognition - drowsiness detection - intelligent speed assist. 5EM darkened headlights. 4DH 980 full-size spare wheel with onboard tools. 01P acoustic pedestrian reversing warning. 5DE start & stop system. 0AA Eco pack with stop & start system including activation switch, integrated. Hodpfx Akszhihdj Ujnu

Condition: used, Year of construction: 1983, turning diameter over bed 1790 mm turning diameter over slide rest 1250 mm turning length 5000 mm faceplate 1250 mm workpiece weight 45 t control Siemens type System 8 T mm turning speeds 1,1-300 U/min total power requirement 72 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Hsdpoy D A D Tefx Ak Ujnu If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2002, Book Block Glue Binder Schmedt Praecoll HHS2 1120 2nd glue tank block width: 110–450 mm block height: up to 345 mm Hnedpfozg Htzox Ak Uou block thickness: up to 82 mm available at short notice

Condition: excellent (used), mileage: 273 km, power: 96 kW (130.52 HP), first registration: 03/2025, fuel type: diesel, tire size: 215/75R16, axle configuration: 4x2, wheelbase: 3,590 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 5,780 mm, total width: 2,070 mm, total height: 2,500 mm, loading space length: 3,320 mm, loading space width: 1,760 mm, loading space height: 1,890 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - None - LED lamp Hedpfx Akoz D S Upj Usnu - Manual - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 2243 kg, Gross vehicle weight: 3300 kg, Trailer coupling, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, Color: White, Heated mirrors, Rear view camera, Type of lighting: LED lamp, Climate control, Bluetooth, Engine power: 96 kW (129 hp), Engine displacement: 1997 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Type of gearbox: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: extended and raised, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, L2H2 | New model | Air conditioning | Tow hitch | Camera | Cruise Control | 3 seats | LED | Parking sensors |, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 215/75R16 Brakes: Disc brakes Axle 1: Tire tread left: 8 mm; Tire tread right: 8 mm; Suspension: Coil spring suspension Axle 2: Tire tread left: 8 mm; Tire tread right: 8 mm; Suspension: Leaf spring suspension Weights Unladen weight: 2,243 kg Payload: 1,057 kg GVW: 3,300 kg Functional Loading area height: 60 cm Condition Technical condition: very good Optical condition: very good Damage: none Number of keys: 2 Financial Information Leasing price: €448 (excl. BPM) per month (delivery van, 72 months); Ask for more information and conditions.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. Hjdpfxsyw Ivhe Ak Usnu ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Year of construction: 2001, condition: excellent (used), I sell the Stacking / Destacking device HOMAG BARGSTEDT TBH22/D/25/12, year 2001. Stacking device one side feeding / also suitable for pallets. Catching head system with vacuum pads Vacuum-System (including pump) Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Security fence system fully complete ! Working capacity apprx 8 tacts / min Hnodpfx Aksm Dqmas Uju Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Condition: good (used), Year of construction: 2002, Control: Siemens Sinumerik 840D Center distance max.: 5000 mm Swing diameter over bed max.: 890 mm Turning diameter max.: 820 mm Spindle bore: 122 mm Spindle diameter in front bearing: 240 mm Spindle nose: A15 / DIN 55026 Hnsdjzv Hw Sopfx Ak Usu Main drive power: 80 kW (100% ED) / 105 kW (40% ED) Number of axes: 4 (X, Y, Z, C)C-axis: yes, max. torque 5000 Nm Tool system: Vert./Hor. head, Capto C8 (Sandvik) Milling spindle: 28 kW / 267 Nm (100% ED) Tool magazine: 100 positions, max. tool length 650 mm Travel X: -10 / +490 mm Travel Y: -130 / +300 mm Travel Z: +180 / +5038 mm Rapid traverse X / Z: 15 m/min, Y: 10 m/min Tailstock: yes, quill diameter 160 mm, taper MK 6 2 steady rests (one of them programmable) Chip conveyor and paper belt filter system Dimensions approx. (L x W x H): 16000 x 4900 x 3300 mm Weight approx.: 35.000 kg