Circular saw for light metal & aluminium

ProfiFeed Technologies A700 Semi-Automatic Aluminium Saw

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences Bdjdpfx Aewvqklsp Iod • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Year of construction: 2004, condition: ready for operation (used), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible. Bsdpfxswu Ez Nj Ap Iodd

Condition: like new (used), Year of construction: 2018, We offer You line Cabinplant with Multivac for snack packing. Production date of all machines year 2018. Line consisting af -Cabinplant 1 line elevator Bdedpfx Aopxm Ugsp Iod -Cabinplant 3 line elevator -Multihead weigher Cabinplant MHW 10 24 -Multihead weigher Cabinplant MHW 10 32 -KEN hygiene system EWD 50 -Platform with stairs -Cabinplant distribution tools 2 pcs -Multivac R245 Type ASE 500, gas, vacum, without a vacum pump The set worked only during device tests, working for approximately 100 hours. The line was dismantled by the manufacturer's services: Cabinplant and Multivac.

Condition: new, Bandsaw machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art. No.: 3690041 Bjdpsilg Hdsfx Ap Isdd Condition: New machine Cutting range (round): 300 mm Band speed: 20-100 m/min, infinitely variable Standard equipment includes: - Fully hydraulic, semi-automatic version After starting, the machine automatically tensions the blade, after the cut is complete, it returns to the starting position, stops the saw blade, and opens the clamping device. - Cutting sensor for automatic detection of material height - Horizontal clamping device, mechanical, hydraulic - Monitoring of saw blade tension, electromechanical - Chip removal brush - Measuring stop with a scale of 1,000 mm - Coolant system - Operating manual

Condition: new, Year of construction: 2025, saw blade diameter: 550 mm, input voltage: 400 V, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - Double miter - 4 pneumatic clamps Bdedpfxjhzuu No Ap Ijd - Hydrocheck system - Mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Air blow gun - Protective cover - Documentation - 400V

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Bdedsfu Ivzjpfx Ap Ied Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm Bdedpfx Apovu Hgbo Ijd - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: Bdedpfx Apsf Ekn Io Iod • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 3 m Linear Unit: ProfiStop Alpha Material Length: 1680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: used, 1) PVC Double Head Welding Machine – Emmegi Fusion 2LV3440 Year of manufacture: 2011 Double head welding machine for PVC profiles. Machine in perfect working condition, regularly maintained annually, complete with manual. 2) PVC Corner Cleaning Machine – Emmegi / Rinaldi Trimmer E Year of manufacture: 2011 Automatic corner cleaning machine for PVC profiles, equipped with lateral support arms. Machine in working condition, regularly maintained, complete with manual. 3) Glazing Bead Cutting Machine – Emmegi Microbo 4200 DX Year of manufacture: 2008 Cutting machine dedicated to glazing beads, designed to ensure precision and repeatability. Included equipment: Roller conveyor Electronic control system Machine in working condition, regularly maintained, complete with manual. 4) Single Head Cutting Machine – OMG mod. Bifra 550 Year of manufacture: 2006 Blade diameter: 550 mm Bdedpfx Apjywkc Ro Ijd Roller conveyors included Measuring handwheel included 5) Reinforcement Screwdriver Machine – Emmegi Fissa A Year of manufacture: 2012 Screwdriver machine for metal reinforcements used in window and door production. Machine in working condition. 6) Hardware Assembly Table – Emmegi BMF 3400 Year of manufacture: 2008 Table dedicated to hardware assembly for window and door frames. Complete with: Screwdriver Espagnolette system Hardware storage system Machine in working condition. 7) Testing and Glazing Table – Emmegi Vitro Year of manufacture: 2008 Table dedicated to testing and glazing operations for window frames. Machine in working condition. 8) Compressed Air System – NEW Year of manufacture: 2024 – never used Complete system for compressed air production and treatment, consisting of: Boge C12-2LF screw compressor, soundproofed, 11 kW, inverter, air flow from 530 to 2,020 l/min, super-silent version Vertical galvanized tank 725 liters, max pressure 10.8 bar, complete with safety valve and pressure gauge Electronic timed drain valve MTA CA Condensate water/oil separator MTA LP04 Compressed air dryer MTA DE-XG027, air flow 2,700 l/min 9) 4-Axis Machining Center – MECAL MC 304 ATLAS Year of manufacture: 2007 4-axis machine equipped with front working unit, specifically designed for aluminium processing. Maximum working length: 7430 mm X-axis working stroke: 7210 mm Y-axis (transversal) stroke: 550 mm Z-axis (vertical) stroke: 500 mm A-axis (rotating spindle axis): rotation range ±180° 10) Double Head Cutting Machine – TEKNA TK 145 Year of manufacture: 1994 Blade: Ø 500 mm Max cutting length: 4000 mm Blade inclination: outward 11) Cantilever Rack Structure Double-sided cantilever system, 1 double-sided block, 9 levels per side: Height: 9 m Max load per column side: 8,100 kg Max load per arm: 900 kg each 12) Single Head Copy Router – Rinaldi Magnum 360I Year of manufacture: 2003 The machine allows processing on four sides without repositioning the workpiece, ensuring maximum precision and operational continuity.

Condition: new, Year of construction: 2026, Mini Crawler Crane TB5000 A mini crane on a crawler chassis designed for indoor and outdoor work. Maximum lifting capacity: 2400 kg. * radio control of the device - driving, working, spreading the feet * double power supply of the crane - diesel and electric 230 V * maximum lifting capacity - 2400 kg * anti-overload system as standard * maximum horizontal reach over 11 m * four hydraulic extensions + 1 manual extension * maximum vertical reach over 13 m * 4 hydraulically lowered supports * weight approx. 2200 kg * height approx. 195 cm * width approx. 88 cm * active arm 16 degrees Additional, optional equipment: * search hook Bdedsibqraepfx Ap Isd * hydraulic winch 990 kg * Li-ion battery power supply * pads for support feet * hydraulic FLY JIB Available in the selected color.