Auto edger buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Edger FR8 SRM Left Main engine - 55 kW Board length - 1.0 - 5.0 m Board width - 60 - 700 mm Cutting height - 18 - 100 mm Ps7uey Edging width - 48 - 470 mm Axle adjustment: hydr. Servocylinder Complete mechanization incl.: - Transverse conveyor in front of the increasing conveyor, - Board separation increasing conveyor, - Continuous capping, board alignment, - Automatic feeding system H-80 with mechanical alignment kinematics, 9 pairs of straightening arms, 9 clamping axles, 6 hydraulic pressu... more
5
30 cycles / min. Raw Board - wide 50-700 mm Raw Board - length 1-6 m Vtrwc Trennsaege-1 feed Max 300m / min. Main drive 75 kW complete mechanization, which includes: roof chain offshoot, separator, assessment location, measuring conveyors, measuring ramp, Besaeumbeschicker, Board offshoot ULE 50, accumulating conveyors, Einstueckzuteiler, Board off camp ULC 50,Staerkenmesser,Besaeumautomat, Splinters separator, roller puller, Veinzeler for Mehrstieligen incision, cross conveyor, conveyor b... more
6
Automatic edger line Esterer Combimess Type - DK 50, right machine. 90f2oovws Year of construction - 1989. Edger - DK 50 B Main drive - 50 kW Board length - 1.0 - 5.0 m Width of board - 60 - 600 mm Axle adjustment: hydr. servo cylinder Complete extensive mechanization incl .: - feeder traverse conveyor approx. 50 meters in front of the increaser, - Board separation increaser, - continuous crosscuting, board alignment, - Automatic infeeding system, type ARS - Autfeedig with spreader separator ... more
6
pressure 60 t no. of strokes 80 - 400 Hub/min sheet width 150 mm table-size 700 x 530 mm dimension of ram 700 x 430 mm distance table - lower edge of ram 350 mm ram stroke - adjustable min/max 20 - 80 mm feed length 5 - 150 mm total power requirement 15 kW weight of the machine ca. 9 t dimensions of the machine ca. m - with band-feeding unit - 2 connecting rods Clorsjn - adjustable stroke - strip decoiler - noise absorbing cabine more
3
Dittel MBA 2000 mechanic balance automatic REF.: F20081, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Hs8bgz7f more
3
VA reservoir pressure tank pressure boiler steel tank 100 liter capacity 100 ltr-perm. Subject. Overpressure 10 bar material stainless steel tank VA Qkuei3he3 more
6
control GE Fanuc 18iT spindle passage 26 mm C - Axis 360 ° Main spindle max. machining diameter 26 mm Max. head stock stroke 220 mm Rapid speed 32 m/min Power rating 5,5 / 3,7 kW Max. speed main spindle t/min 8.000 Subspindel Max. diameter of conditioning 26 mm C - Axis 0,001 ° Power rating 3,7 / 1,1 kW Dc7z8ermw Max. speed t/min 8.000 Subspindle stroke 120 mm Cross working Driven tool stations: 3 power capacity - driven tools 0,5 / 1,1 kW Frontside boring 3-fold Backside processin... more
5
 Chat starten

Cold Circular Saw EISELE - Halbautomat VMS 5 - PV

Ahaus Germany
6360 km
1977
USED
saw blade diameter 500 mm cutting diameter 180 mm stroke 300 mm capacity 90 degrees: flat 280 x 140 mm saw blade turning speeds 6-12-24-48 1/min engine output 2,6 / 3,2 kW total power requirement ca. 5,5 kW weight of the machine ca. 1450 kg Tolmucwu9 dimensions of the machine ca. 1,4 x 2,8 x 2,4 m more
6
-----MACHINE ONLY AVAILABLE TO END USER CUSTOMER----- 2003 MACHINE, 500MM EXTERNAL GRINDING WHEEL FOR STRAIGHT OR ANGLE APPROACH GRINDING + INTERNAL SPINDLE WITH FREQUENCY CONVERTOR, AUTOMATIC REBUILT “B” AXIS WITH 1 DEGREE, FANUC 21i CNC WITH EASY PICTOGRAM PROGRAMMING, SENSITRON, LENGTH POSITIONING, REBUILT WORKHEAD AND TAILSTOCK BY STUDER AG FACTORY, 1000MM CENTRE DISTANCE x 175MM CENTRE HEIGHT, *****FREE OPERATOR TRAINING ON ALL MACHINES SOLD IN NOVEMBER***** Gvfolg INSTALLA... more
4
cutting diameter 520 mm saw band length 6096 mm cutting width 620 mm Qw909tjiv rectangle 520 x 620 mm band speed 50 - 325 m/min main drive 6,5 / 8 kW total power requirement kW weight of the machine ca. 4 t dimensions of the machine ca. 3,3 x 2,2 x 2,35 m fully automatic machine suitable for Bi-metal or tungsten-carbide sawing bands 630 x 700 mm table with 180° indexing device hydr. infinitely variable band clamping electronic controlled sawing feed with [...] with bundle clamping attachme... more


auto edger
every day

New machines via email!

Be informed!
3
Dittel MBA 2000 mechanic balance automatic REF.: F20081, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Haqlu0j more
5
Pallet, Pallet wrapping machine, Strechwickelmaschine Fully Automatic Pallet Wrapper with electronic film pre-stretch-exact turntable positioning by fix-stop number of the root and top wraps-up & Cross Winding turntable diameter 1500 mm Max. Pallet Weight 1500 kg Dimensions 2750/1500/H2550 mm weight approx 400 kg 3mfzhfil more
6
saw blade diameter 630 mm cutting diameter 200 mm stroke 1000 mm cutting speed 6-26 m/min cutting lenght max. 1000 mm capacity 90 degrees: flat ca. 340 x 137 mm total power requirement 11 kW weight of the machine ca. 2 t dimensions of the machine ca. 2 x 1,65 x 1,95 m Condition: ready for operation Electric 380 Volt Cooling equipment saw blade REDUCED PRICE! Fully automatic machine with preselection for number of pieces. The year of Qmptyceip production is estimated. The machine is ... more
2
cutting diameter 350 mm saw band length 3900 mm cutting width 0,9 mm cutting range - flat - 395 x 240 mm dimensions of saw-band 3900 x 25 x 0,9 mm total power requirement 1,75 kW weight of the machine ca. 0,6 t 77rtl8jef dimensions of machine 2,05 x 1,78 x 1,5 m - with feed rolls - - with mitre cutting - Accessories: roller track 4000 mm, length stop with end switch for cutting lengths up to 1600 mm, coolant more
5
cam controlled multi spindle automatic lathe, 6 main spindles, electronic trip dog control “balluff”, pick up for rear machining, threading clutches, independent feed in cross pos. 2 and 4, interface for barloader IEMCA PRA enclosed, coolant pump, additional coolant pump with magnetic candle filter 9cn803vmz [optional: cleaning and revising] more
6
CITIZEN K 16 VIP CNC automatic lathe with bar loader Control: FANUC 31i - TA Year of construction: 2005 Machine number: K1216 / 0073 Maximum processing diameter: 16 mm Facilities: Bar loader FMB minimag 18 3200 / 1305 C FANUC 31i Simultaneous drilling on front and back 5 turning tools 4 drill bits, each for front and rear Including complete accessories Manual / documentation Machine parameters on the storage medium E9j02wwhq See PDF complete specifications and plans The ... more
4
Bulletin 2090-XXLF X 330B RFI filter, serial number according to the photo, used, good condition, 100% functional, included with com. photos Cpyl9rre more
5
 Chat starten

Band Saw JAESPA - Halbautomat W 320 G

Ahaus Germany
6360 km
2003
USED
cutting diameter 320 mm saw band length 4120 x 27 mm table height 600 mm cutting speed 17 - 110 m/min mitter cutting - all-position 30 ° - 90 ° ° cutting diameter 45 ° - 300 mm mm capacity 45 degrees: flat 300 x 200 mm capacity 90 degrees: flat 450 x 320 mm total power requirement kW weight of the machine ca. 600 kg. range L-W-H 2,0 x 1,8 x 1.2 m B3thb7l more
6
pressure: 30 t stroke: ca./approx. 20 mm S8wtki8ut strokes per minute: 200 - 1200 H/min Table surface area useable: B:350xH:330 mm ram adjustment: max. 50 (manual) mm ram surface area: 450x250 mm adjustment of stroke: keine / no stroke adj. mm dayligth: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 3,6 t transport dimensions LxWxH: 2,3x1,6x2,7 m automatic punching press-4 column mechanic transportation dimensions incl. electric cabinet [...] more
3
pressure 30 t no. of strokes 100 - 420 Hub/min sheet width 120 mm table surface area 420 x 450 mm ram surface 390 x 250 mm stroke 6 - 40 mm ram adjustment 60 mm dayligth 260 mm total power requirement 5,5 kW weight of the machine ca. 3,2 t dimensions 2,35 x 1,05 x 2,43 m Gus3m8j Accessories: feeder unit RZV 80, for sheet width 0 - 120 mm, decoiler more
6
cam controlled multispindle automatic lathe, 6 main spindles, pick up for rear machining, threading clutches, stock stand and reel, interface for barloader IEMCA PRA enclosed, coolant pump, additional high pressure coolant pump, oil mist filter, 9cnzyyvyi tooling: could be different to pictures [optional: cleaning and revising] more
5
Hack saw, hacksaw machine -Max saw diameter 320 mm -Max saw width 340 mm -automatischer feed Blade 615 mm simply material feed 1280 mm multiple speeds Dimensions 1800/2300/H1300 mm Weight 1500 kg Guvnls more
6
Cutting capacity round material: Ø 434 mm Flat material cutting area: 434 x 434 mm Powered band saw blade: 7,5 kW Total power requirements: min. 9.7 kW Cutting speed: up to 150 m / min. Saw feed: electric speed: 0-300 mm / min stepless Band saw blade dimensions: 6.220 x 41 x 1, 3 mm Saw band tension: hydraulic System pressure (hydraulic): 72 bar Max material weight: 500 kg / m Noise measurement: approx. 74 dB (A) Accessories: Chip conveyor Coolant system 180 L 9x7000ea7 Runway e... more
4
cutting diameter 340 mm saw band length 4860 mm cutting width 340 mm dimensions of saw-band 4860 x 32 x 1,1 mm cutting speed 17 - 120 m/min multiple feeding length 3 x 500 mm coolant Lrfzt voltage 380 V total power requirement 7,0 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,50 x 2,30 x 1,60 m - Serial-No.: 0588491 - multiple feeding 7x - roller conveyor - chip conveyor - coolant equipment more
4
spindle passage: 29 mm Number of tools: 6 St. turning length: 64 mm spindle revolutions per minute : [...] U/min total power requirement: kW Ikgjte7 weight of the machine ca.: 1,1 t space requirement of the machine approx.: L:2,0x1,0x1,8 m cam-controlled automatic lathes There are 4 machines on sale (3x C29 and 1 x B60) We are offering these machines per single item, but on request as a package. Accessoires are available on request. more
3
pneumatic actuated automatic valves Actubar-actuator 8zlj0uyjq with opto-electrical signal unit bar-Switchmaster multiple times on stock / unused, older stock more
3
 Chat starten

Band Saw JAESPA - Vollautomat W 320 GA

Ahaus Germany
6360 km
2001
USED
cutting diameter 320 mm capacity 45 degrees: round 320 mm cutting width 450 mm capacity 90 degrees: square 450 x 300 mm capacity 45 degrees: flat 300 x 300 mm saw band length 4.120 x 34 mm Ecd7dajjy band speed 17 - 106 m/min automatic feeds max. 9 x 500 mm mm mitre joint cuts -/+ degrees 30 - 90 ° total power requirement 3,2 kW weight of the machine ca. 1.200 kg. range L-W-H 2.250 x 2.150 x 1.750 mm more
5
Hack saw, hacksaw machine -Max saw diameter 180 mm -Max width of saw 180 mm -automatischer feed Saw blade 350 mm multiple speeds Dmsh2j3 Dimensions 2200/1400/H1300 mm Weight approx. 1000 kg more
6
blade length 350 mm, Matrialvorschub through roles in the vice. Hydraulic wear was renewed. Chip conveyor. Jkw3qlksk more
6
Automatic heating plant HOBAG / NOLTING / RSN incl. briquetting press Used, in good condition can be visited in operation Consists of - automatic log heating system HOBAG incl. crushing plant and pressing unit for each wood type - boiler NOLTING AHK 135 Cqprhjtac 117 kW -briquetting Press RSN SP 70/20 7 kW more
4
turning diameter over bed: 32 mm spindle passage: 60 mm S8zdzgnvb turning length: 45 mm revolution per minute: [...] (spindle) U/min rotary speed of motor: 1450 U/min total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,0x1,0x1,8 m cam-controlled automatic lathes There are 4 machines on sale (3x C29 and 1 x B60) We are offering these machines per single item, but on request as a package. accessoires are available on request. max. travel... more
5
stations unbek Wf02eozkm number of slitts unbek length unbek mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
6
 Chat starten

Cold Circular Saw MEP - Vollautomat TIGER 350 AX

Ahaus Germany
6360 km
1997
USED
saw blade diameter 350 mm cutting diameter 115 mm stroke 180 mm 82td3pogp capacity 45 degrees: flat 125x95 mm capacity 45 degrees: round 95 mm vice 190 max. Öffnungsweite mm turning speeds 15 / 30 / 45 / 90 U/min total power requirement 2,7 kW more
5
Strapping Machine, Packing Machine, Strapping Machine br / br / table 870 x 500 mm br / -Umreifungsband 5-12 mm br / -Infinitely adjustable strap tension of 5-450 N br / -Höhenverstellbar 700-830 mm br / -dimensions 500 / 870 / H840 mm br / weight 74 kg Durvt3 more
1
cutting diameter 400 mm capacity 90 degrees: square 400 x 400 mm saw band length 5800 mm dimensions of saw-band 5800 x 38 x 1,3 mm feed length 600 mm cutting speed 18 - 90 m/min height of material-table 500 mm total power requirement 5,0 kW weight of the machine ca. 2,7 t range L-W-H 2,50 x 2,92 x 2,10 m Lwbdj acc.: chip conveyor, coolant more
1
Machine cutting tables for three knife machines 9yxcpmsnt more
6
pressure: 30 t ram surface area: 450x250 mm ram adjustment: max. 50 (manual) mm dayligth: 400 mm Table surface area useable: B:350xH:330 mm strokes per minute: 200 - 1200 adjustment of stroke: keine / no stroke adj. mm stroke: ca./approx. 20 mm mm total power requirement: 7,5 kW weight of the machine ca.: 3,6 t transport dimensions LxWxH: 2,3x1,6x2,7 m F3wx3mz automatic punching press-4 column mechanic transportation dimensions incl. electric cabinet [...] more
6
Fully automatic rotary table for MAHO MH 800 C Ø 800 mm, table height: 650 mm, 7 T - slots M16, hydraulic connections with quick release, included with com. FotosACHTUNG used, normal wear, 100% functional: cost for shipping and handling separately request! ATTENTION: Please enquire for charges for packing and transport separately! Vr077q more
5
 Chat starten

Band Saw MEP - Halbautomat SHARK 280 SX Duty

Ahaus Germany
6360 km
1998
USED
cutting diameter 250 mm vice 290 mm band speed 36 / 72 m/min capacity 45 degrees: flat 180 x 210 mm capacity 45 degrees: round 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 120 x 130 mm capacity 90 degrees: square 230 x 230 mm capacity 90 degrees: flat 280 x 200 mm saw band length 2.950 x 27 x 0,9 mm Ptghbu total power requirement 1,5 / 1,8 kW weight 610 kg range L-W-H 1,9 x 2,04 x 1,9 mm more
5
Umfälzautomat, Umfälzfräsmaschine -maximum clearance height mm Spindle diameter 40 mm Eqbgh32 -Overall line consumption 19.5 kW get Cutter shaft motor power kW -zweite cutter shaft motor power kW -dritte cutter shaft motor power kW Fourth cutter shaft motor power kW Dimensions 4070/1300/H1620 mm Weight 2200 kg more
2
cutting diameter 560 mm saw band length 8020 mm cutting width 1,1 mm capacity 90 degrees: round 560 mm capacity 90 degrees: square 560 x 560 mm dimensions of saw-band 8020 x 1,1 x 54 mm feed length 550 mm feed length: multiple 9999 mm Uqvwqkgcj cutting speed 17 - 127 m/min control CEB, SAW III total power requirement 7,5 kW weight of the machine ca. 7,6 t range L-W-H 4,30 x 2,40 x 2,56 m acc.: roller track 3000 mm, roller track 1800 mm, roller track 850 mm, chip converyor, coolant more
6
5 - axis version Ssvcuc pick up spindle rear working live tools High-pressure coolant system Conveyor belt for finished parts IEMCA bar loader more
5
cutting diameter: 270 mm saw band length: 4300 mm band width: 1 mm total power requirement: 1.8 kW weight of the machine ca.: 2.8 t space requirements of the machine approx.: 2.4x2.2x1.8 m complete equipment with tilting table 2x45° Baujahr: 1978 Yuwfcu8n can be used as mitre saw. automatic material feeder can be demonstrated [...] more
6
max. machining diameter 8 - 32 mm Ma. Turning Length 320 mm Control Fanuc 32i Model B max. thread diameter M 10 max. drilling diameter 12 mm Main spindle: turning speed range - main spindle 200 - 8.000 min/-1 power capacity - main spindel 3,7 / 5,5 kW Subspindel: Spindle speed range subspindle 200 - 8.000 min/-1 power capacity - Sub spindle 2,2 / 3,7 kW Tool Mount: number of toolpositions Standard: 31 pos. outer processing inner processing Backside processing 9uyt7pm7j Tool size A... more
5
total power requirement:5,5 kW weight of the machine ca.:3 t dimensions of the machine ca.:L 3,6 x B 1,9 x H 2,13 m saw band length:5800 mm cutting speed:15 - 150 m/min clamping height:0 - 410 mm clamping width:10 - 410 mm down speed stepless: mm/min. 70zheh0tt cutting range:700 x 410 mm cutting range round:410 mm horizontale bandsaw 30° left: 130x250mm; 45° left 300x300mm; 90° 500x300mm; 45° right 380x300mm; saw blade 5400x34x1,1mm; total power requirement: 400 V; including roller converyors... more
5
Umfälzautomat, Umfälzfräsmaschine -maximum passage height 120 mm Spindle diameter 40 mm Drive motor 5.5 kW Drive feed 0.75 kW Dimensions ca 3200/900/H1500 mm Qkzzfv8d2 Weight approx. 3000 kg more
3
cutting diameter 500 mm capacity 90 degrees: square 500 x 500 mm saw band length 6900 mm dimensions of saw-band 6900 x 38 x 1,3 mm feed length 600 mm Uqvtq8nz9 feed length: multiple bis 5999 mm cutting speed 18 - 90 m/min height of material-table 700 mm total power requirement 5,0 kW weight of the machine ca. 4,0 t dimensions of the machine ca. 3,70 x 2,30 x 2,20 m Accessories: coolant - 2-column-guided - more
3
cutting diameter 230 mm saw band length 2710 mm cutting width 225 x 225 mm dimensions of saw-band 2710 x 0,9 x 25/27 mm mitter cutting 45 ° cutting speed 28 / 56 m/min power capacity 0,85 / 1,2 kW coolant voltage 400 V total power requirement 1,3 kW weight of the machine ca. 475 kg Hrxjh2hd more
6
Number of bars max.: 9 cutting capacity with 1 bar max.: 20 mm weight of the machine ca.: 6,0 t Cuts, bends and picks steel rods. Plant is applicable for use in concrete formwork, reinforce concrete, etc. Plant is specially has been constructed for this type of application area. consists of: -cutting unit incl. feed -bending unit -bridge with robot unit for gripping of steel rods - SPS controlled robot arm -delivery unit -framework with 9 boxes -control panel - electric cabinet ready for transpo... more
6
pressure 25 t sheet width 250 mm throat 210 mm stroke 10-100 mm table-size 560 x 400 mm double strokes/min. 180 Stück table adjustment - upper 190 mm total power requirement 3 kW weight of the machine ca. 2,25 t 9zsruzhbz dimensions of the machine ca. 1,1 x 1,4 x 2,33 m Double-column eccentric press with transverse shaft, wheel guard, electro-pneumatic drive, adjustable stroke and ram, adjustable table. Roller feed: band feed length 0-125 mm, max. Band thickness 1.5 mm, bandwidth up to 250 m... more


auto edger
every day

New machines via email!

Be informed!

to

to

Change search
AUTO EDGER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close