MORGANA AutoCreaser PRO 50 - working width 500 mm; processed papers with inlet width up to 500 mm and a total length up to 1,000 mm (manual feed), convinced by his basically grooves bar grooves technology. The drawer gently using a sniffer at speeds up to 8.500 sheets / h (depending on the paper and number of grooves). The Groover can be established also for smallest runs in minimum time. This causes a massive time savings compared to manual grooves or a finishing outside the home, what is often... more
Morgana DigiFold PRO Automatic Creaser Folder
The device is fully functional, ready for work.
It is the most efficient creasing and folding system on the market, solid construction.
Production made in England.
Vacuum feed, non-stop feeder with the possibility of adding material during work.
The set includes: two creasing modules for different paper weights, creases, perforators and slitting knives of various sizes (longitudinal), handling tools, and user’s m... more
Creasing and folding in one operation
(only grooves possible)
Model series 2012
Infeed width 375 mm
Min. 105 x 148 mm
Maximum 375 x 660 mm
Gram weight area approximately 100 to 400 g / m2
Up to 20 grooves/arch
Up to 6,000 sheets / hour (DIN A4)
Min. 30 mm intervals
3 grooves depth adjustable
for single -, Tri - and Z-fold, open & closed altar fold, quarter-fold seam
-Pile feeder (suction / blowing air)
-Creasing comb (swivel, 2 groove widths standard & n... more
mobile/space-saving Groove and perforating machine
Minimum weight of paper: 40gqm
Maximum paper weight: 450 600gsm minimum size: 100 x 100 mm
Maximum size: 915mm x 635mm maximum speed up to 18000 per hour
Weight: 216 kg
Still in production
Machine has grooved only 353,000 arch, condition is good.
4 groove widths are included.
• Sniffer sheet feed
• Throughput up to 7,000 sheets per hour
• can be programmed up to 28 grooves per sheet
• There is no minimum distance between the grooves
• processed formats within min. A5 up to max 50cm or 6 pages A4 (folder)
• Resettable pad counter
• Standby mode
• Voltage: 230V/50 Hz
• Space: 153 x 72 x 100 cm
• Vacuum pump 40m 3 Becker
Technical da... more
Half automatic beams creasing machine
-with hand feeding (arc of feed rollers covered is)
-Inlet width up to 33 cm
-Length up to 6 A4 pages
-up to 2,000 sheets / hour
-up to 9 creases/arch
-Paper weights up to 350 g / m
-4 different Groove width possible
-Perforation device (in direction of travel)
-Standing model; Mobile on castors
The video shows the machine in use.
6 grooves and perforations centred in longitudinal direction.
Electric wire closer Renz ECL 360
The condition of the device is perfect, ready for production.
The machine comes from a small printing house.
Electric wire closer ECL 360:
Electrical clamping via a foot pedal
Up to 34 mm (340 sheets) in one cycle
Capacity approx. 400 cycles / h depending on the type and format of the material
Foot-operated cycle allows setting the material with both hands
Supports 3/16 „- 1 1/2” spirals regardless of pitch
Quick settings of different spiral di... more
Integrated rill pouncing cutting machines, camera reading: SM 54/4, cut SM 74/4 with flat-pile feeders FL2-50 and flat stack delivery
Ideal to the rotative, creasing, perforating, taktperforieren, crimp, cut, etc.
1. Flat-pile feeders FL2 - stack height 600 mm
SM 50/4 and SM 74/4The cutting machine has few knife shaft depending on the type 1 to 4.
Bei the SM 50 / 4 and SM 74/4 I do several steps in a single pass. For example, bar cutting, clock perforation, cut, trim, st... more
high capacity rotary perforating/creasing/cutting machine
material thickness up to 0.8 mm
Stahl FEC 78.2 vertical pile feeder with Tremat
max. 78 x 116 cm, min. 15 x 20 cm
a lot of accessories/tools more
Petratto Cordoba 3D die dual creasing and perforating machine with window pocket
flat pile feeder, double sheet control, first bar creasing station, second bar creasing/perforating station, window folding pocket, stream delivery with pressing.
Option: Hotmelt glue unit with nozzle.
Groove perforating machine; very good condition; with various tools to creasing and perforating; Max. Width 700mm, min. 120mm; Max. Length 600mm, min. 100mm; Mobile; separate compressor; Suction feeder.
We are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse.
Tours and demonstrations are possible by appointment at our premises.
Gladly we inform you also about our complete inventory because onl... more
electric grooving and perforating machine
working width: 68 cm
table front and rear with center guide
1 paper stop forward
1 side flap left
1 stacking table
1 grooved comb
1 perforating comb (hole)
1 foot switch
good condition more
Operation through touch screen.
As integrated creasing and folding machine, which performs both functions in one operation.
Supply suction feeder pulls paper from the bottom
Preset counter standard
Total counter standar
Paper size Max 700 x 358 mm
Paper size min. 210 x 140 mm
Paper weight max. 400 g / m ²
Paper weight min. 100 g / m ²
-Maximum number of grooves or sheet 9
-Maximum number of folding fractures or sheet 2
Number of program space far beyond... more
FL2-50 - flat pile
Pneumatically controlled separating head.
Which enables exact sheet separation also in case of highest performance.
Very fast and exact sheet separation is available with the small flat pile feeder FL2. Combined with the Cutting machine from G&K
the feeder offers an easy to use, flexible control unit and best output rates.
GUK SM-2 Cutting machine
Functions - Description
For the connection with mailing products, folding systems and foreign mechani... more
Cutting Nutmodul with alignment line,
Ideal for cutting grooves perforating
Stable design, fully mobile, hydraulic height adjustment.
380 volts, start stop switch, speed infinitely variable external control of third-party module
Machine is in mint condition,
• Creasing and straight perforation
• Automatic feeder include compressor
• Speed: Up to 3600 sheet/h
• Paper size min: 8,9 x 12,7 cm
• Paper size max: 45,7 x 57,0 cm
• Paper weight: 45 - 385 gsm
• Include compressor for feeding system
• Compressor for air pressure optional/on request
checked / working condition / Test possible / in our stock
Perforating machine Punch Super 600
The machine is brand new.
12 months warranty.
Perforator Super 600 is an industrial machine used for perforating paper, among others, in the production of calendars. The solid construction of this device allows for continuous and one-time hole punching of a block of paper up to 5 mm thick. The efficient drive system enables 60 cycles per minute. The device has been designed in a way that allows us to change the tool which makes the machine more univ... more
Product: grooving machine
Model: PD 70/75
Grooving width: 70 cm
Status: Germany on stock/Velten, near Berlin
Optical/Techn. condition: good
Available: shortly upon agreement
Price/Terms: upon request
Automatic creaser Bacciottini PIT STOP DG LINE 6500 LCD
The device is fully functional, ready for work.
It is the most efficient perforating creasing system on the market, solid construction.
Vacuum feed, non-stop with the possibility of adding material during work.
The set includes creasing and perforating tools.
Max sheet size: 500 × 700 mm
Min size of the sheet: 80 × 100 mm
Max speed (for A4 size): 6,500 sheets / h
Material weigh... more
AutoCreaser Pro 33 - Paper Creasing Machine
The AutoCreaser Pro 33 is an easy to use paper creasing machine for digital printers, which allows the user to cut, crease and fold by employing a unique creasing rule that eliminates paper tearing and therefore cracking.
This model is based on the AutoCreaser but in addition it offers many new features and benefits to the user. The most obvious difference is the intuitive 7” SmartScreen that controls all the main functions of the AutoCreaser Pro 33.... more
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.