Used Optiflex B for sale (38,709)

Condition: used, Year of construction: 2012, The machine is designed for the production of: • Stand-up pouches (Doypack / SUP) with bottom gusset • Three-side seal pouches (3SS) • Flat pouches • Bottom-gusseted pouches with shaped bottom contours Dsdjz Szcyjpfx Ak Aokw Technical Data: • Machine length: 16,900 mm • Machine width: 5,500 mm • Machine passage width: 800 mm • Operating voltage: 400 V, 50 Hz, 3-phase • Control voltage: 24 V DC • Power rating: 125 kW • Current: 235 A • Maximum web feed speed: 3.0 m/s • Maximum output: 150 cycles/min • Maximum output with stacking system: 130 cycles/min • Main operating side: left-hand side in the direction of web travel Production Capabilities • Three-side-sealed pouches • Stand-up pouches • Pouch width: 90–340 mm • Pouch length: min. 80 mm; max. 375 mm (two lanes), max. 750 mm (single lane) • Bottom gusset depth: 20–75 mm • Processable materials: PET/PE, PA/PE, PET/ALU/PE • Film thickness: 80–250 µm Equipment • Shaftless unwind stand with web edge control • Height-adjustable unwinding position • Unwind stand for 152 mm cores • Maximum clamping width: 1,600 mm • Maximum roll diameter: 1,200 mm • Bottom-gusset strip unwind stand with web edge control • Bottom-gusset strip unwind stand for 76 mm cores • Maximum clamping width for bottom-gusset strips: 450 mm • Maximum roll diameter for bottom-gusset strips: 1,000 mm • Dancer system for roll changes during machine operation • Fine-dust extraction for bottom-gusset strips • Hot embossing station • Sealing presses with cooling, complete sealing process • Bottom-contour punching unit and bottom opener • Punching-knife holder for 310 mm wide knives • Bottom pre-opening unit with additional embossing function • Longitudinal edge trimming with additional punching unit • Six knife holders with trimming blades replaceable during production • Suction conveyor with three waste-removal rollers for punched corners • Pouch stacking unit with lateral discharge conveyor • Reject diverter into a mesh container • Swivelling packing table • Carton sealer and roller conveyor • Matho central extraction system for punching waste • Extraction of bottom-hole, corner and bottom punching waste • Edge-trim extraction with shredding function • Waste collection in a Big Bag

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes Dkjdpsy In Avsfx Ak Aow

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Dedpfx Ajy In Apok Aokw Thin sheet loading: yes

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 6,597 h, load capacity: 5,000 kg, lifting height: 4,450 mm, free lift: 840 mm, fuel type: diesel, mast type: simplex, construction height: 3,250 mm, fork carriage width: 1,260 mm, fork length: 1,360 mm, empty load weight: 8,700 kg, total length: 4,600 mm, drive type: Diesel, construction width: 2,200 mm, Side Loader Load center: 700 Fork width: 160 mm Fork thickness: 65 mm Mast type: Standard Condition: Ready for use and fully functional Dkjdpfx Aksz Ev U Nj Asw Technical condition: very good Front tire type: Air Front tire size: 27x10-12 Rear tire type: Air Rear tire size: 27x10-12 Description: In addition to this Battioni Pagani model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options are available at favorable terms. We are also happy to buy your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed information about this HT5KU. P.S.: Our forklift workshop specializes in repair, refurbishment, overhaul, and custom construction for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale at our location. 1x NIVO fork; telescopic forks 1360 / 2360 mm Heater, full cabin, Platform height: 820 mm

Condition: good (used), Year of construction: 1978, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit type CB140 H 116 -Pressure: up to 150 bar -Flow rate: 6 l/min -Hydraulic tank: with level indicator -Individual components: see photos Dkjdjwnn U Eopfx Ak Aow -Dimensions: 700/400/H710 mm -Weight: 125 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, magnetic sign, 170x450mm Dkodpfx Aezicflek Ajw Clean and well-maintained, with a paper filter.

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc. Dksdpfxj Ad Hmgj Ak Aow

Condition: used, functionality: fully functional, overall weight: 1 kg, total length: 150 mm, total width: 120 mm, total height: 60 mm, input voltage: 24 V, B&R 0AC808 Industrial Ethernet Hub – 8-Port 10/100 Mbit/s Industrial 8-port Ethernet hub for networking automation components via Ethernet and Ethernet POWERLINK. Manufacturer: B&R Industrial Automation Type: 0AC808 Designation: 0AC808.9 (subject to nameplate verification) Device type: Industrial Ethernet hub Network level: Layer 2 Number of ports: 8 Interfaces: 8 x RJ45, shielded Ethernet standard: IEEE 802.3 Transmission standard: 10BASE-T / 100BASE-TX Transmission speed: 10 / 100 Mbit/s Speed detection: Automatic Network protocols: Standard Ethernet and Ethernet POWERLINK Maximum cable length: 100 m per segment Operating mode: Half-duplex MDI/MDIX: Switchable for channel 1 Supply voltage: 24 V DC Power consumption: Max. 5.2 W Reverse polarity protection: Yes Potential isolation: Present Status indicators: Network activity, link/collision, and supply voltage Diagnostics: LED status indicators Mounting: DIN rail mounting or direct mounting Djds Aia Dcopfx Ak Aekw Mounting orientation: Horizontal or vertical Degree of protection: IP20 Operating temperature (horizontal mounting): 0 to +60 °C Operating temperature (vertical mounting): 0 to +50 °C Storage temperature: -25 to +70 °C Relative humidity: 5–95 %, non-condensing Dimensions (W x H x D): 115 x 43 x 86 mm Height with DIN rail mounting: 51 mm Suitable connection terminal: B&R 0TB704.9 / 0TB704.91

Condition: good (used), Complete control block. Dsdpfxoy I Td Se Ak Askw Input: 24 VDC Output: 24 VDC Application: Originally from a glass processing machine manufactured by Lisec Width: 615 mm Height: 150 mm Depth: 70 mm Weight: 3.0 kg Condition: good, second-hand

Condition: used, Year of construction: 2019, functionality: fully functional, Sputtering System – Aurion Plant Technology Manufacturer: Aurion Plant Technology System Type: B-VPA-28 Serial Number: 302343 Technical Data and Equipment The sputtering system has a total weight of approximately 7,000 kg and dimensions of 6,217 × 3,500 × 2,100 mm (W × D × H), each without vacuum pumps. The chamber volume is approximately 670 liters. The maximum ambient temperature is 25 °C. The electrical mains connection is with 400/230 V at 50 Hz. The connection power is approximately 100 kVA with a current draw of approximately 125 A. Substrate and Heating System Substrate dimensions: 38 × 31 × 1.08 mm Transport pallets: 416.9 × 504.5 mm Capacity: 144 substrates per transport pallet Substrate heating up to a maximum of 250 °C Vacuum and Process Gas System Achievable final pressure: < 1 × 10⁻⁷ hPa Process gas: Argon 2 Bronkhorst F-201CS flow controllers, each with 500 mln/min Coating System 2 DC generators ADL GX 150/800, each with 15 kW Vacuum components (Pfeiffer Vacuum) 4 × Roughing pump DUO 35 2 × Roughing pump DUO 65 2 × Rotary vane pump Okta 500 3 × Turbo pump HiPace 1200 U 1 × Turbo pump HiPace 2300 U Dodpfxj Ah Tlgo Ak Ajkw Valve technology from VAT Control and Automation Technology The system control is based on a Siemens SIMATIC S7 controller and includes a panel PC with WinCC for operation and process visualization.

Condition: used, functionality: fully functional, overall weight: 1 kg, total length: 150 mm, total width: 100 mm, total height: 100 mm, input voltage: 24 V, B&R X20SL8101 SafeLOGIC Safety Controller – Ethernet POWERLINK Programmable safety controller from the B&R X20 series with an integrated bus controller, POWERLINK interface, and openSAFETY communication for industrial safety applications. Manufacturer: B&R Industrial Automation Type: X20SL8101 Series: X20 SafeLOGIC Module type: Safety controller / Central unit Integrated bus controller: Yes Safety communication: openSAFETY Maximum number of SafeNODEs: 280 Programming: Automation Studio / SafeDESIGNER Safety level: Up to SIL 3 according to IEC 61508 / IEC 62061 Performance Level: Up to PL e, Category 4 according to ISO 13849-1 Interface: Ethernet POWERLINK POWERLINK function: Controlled Node Connections: 2 x shielded RJ45 ports (integrated hub) Transmission standard: 100BASE-TX Transmission rate: 100 Mbit/s Maximum cable length: 100 m between two nodes Minimum fieldbus cycle time: 200 µs Minimum X2X link cycle time: 200 µs Autonegotiation: Yes Auto-MDI/MDIX: Yes Operating mode: Half-duplex Standalone operation: Yes Dynamic Node Allocation (DNA): Supported Supply voltage: 24 V DC (-15 % / +20 %) Maximum input current SL/BC/X2X: 0.9 A Power consumption: 5.3 W Power consumption I/O internal: 0.6 W Power consumption X2X link supply: 1.42 W Output rated power SL/BC/X2X supply: 7 W I/O output rated voltage: 24 V DC Permissible contact load I/O supply: 10 A Maximum number of function block instances: 4096 Memory for flags: 262,144 bytes Stack memory: 32,768 bytes Memory for safe input data: 6144 bytes Dkjdpfxs Aia A Uo Ak Ajw Memory for safe output data: 2048 bytes Storage medium: Replaceable SafeKEY Potential isolation: Fieldbus to X2X link and I/O Cooling: Fanless Status indicators: CPU, POWERLINK, SafeKEY Protection class: IP20 Operating temperature in horizontal mounting: 0 to +60 °C Operating temperature in vertical mounting: 0 to +45 °C Storage temperature: -40 to +85 °C Relative humidity: 5–95 %, non-condensing Dimensions (W x H x D): 62.5 x 99 x 75 mm Weight: 190 g B&R ID code: 0xE649

Condition: used, functionality: fully functional, input voltage: 24 V, B&R X20SI9100 Safety Input Module – 20 safe digital inputs Safety-related digital input module from the B&R X20 series with 20 safe inputs and 4 pulse outputs for industrial safety applications. Manufacturer: B&R Industrial Automation Type: X20SI9100 Series: X20 SafeIO Dedps Aia A Rsfx Ak Aekw Module Type: Safety-related digital input module Number of safe digital inputs: 20 Input type: Type A Input circuit: Sink Input characteristic: Type 1 according to EN 61131-2 Nominal voltage: 24 V DC Voltage range: 20.4–28.8 V DC Input current at 24 V DC: 2–3.28 mA Input resistance: At least 7.33 kΩ Switching threshold low: 5 V DC Switching threshold high: > 15 V DC Hardware input filter: ≤ 150 µs Software input filter: 0–500 ms, adjustable Error detection time: 200 ms Number of pulse outputs: 4 Output type: Push-Pull Output nominal current: 50 mA per output Total nominal current: 200 mA Output protection: Channel-wise shutdown in case of overload or short circuit Power consumption bus: 0.4 W Power consumption I/O internal: 1.6 W Potential isolation between channel and bus: Yes Isolation voltage between channel and bus: 500 Vrms Safety level: Up to SIL 3 according to IEC 61508 / IEC 62061 Performance Level: Up to PL e, Category 4 according to ISO 13849-1 Protection class: IP20 Operating temperature in horizontal mounting: 0 to +60 °C Operating temperature in vertical mounting: 0 to +50 °C Relative humidity: 5–95 %, non-condensing Grid dimension: 25 mm Status indication: LED indicators for channel status, operating status, and module status Compatible bus module: X20BM33 / X20BM36 Compatible field termination block: X20TB52 (2 pieces required per module) Available quantity: 3 pieces

Condition: used, Year of construction: 2005, functionality: fully functional, ABB Robotics IRB 2400 robot - IRB2400/16 Type B Standard / M2000 - S4Cplus controller (Serial No. 24-29753) Manufactured on 08.12.2005 Key technical data of the IRB 2400 family The exact performance values depend on the specific sub-variant (e.g., Standard, /10, /16, or /L): • Payload: Typically 10 kg to 20 kg (standard variants often with 16 kg; the long-arm variant IRB 2400L has a maximum payload of 7 kg). Reach: Depending on the design, from 1,550 mm to 1,800 mm for the long-arm model. Degrees of freedom: 6 axes for maximum flexibility. • Self-weight: Approx. 380 kg (pure manipulator without controller). • Mounting: Extremely flexible – can be placed on the floor, mounted on the wall, or completely suspended from the ceiling. Typical application areas Thanks to its high path accuracy and robust design, this articulated-arm robot is primarily used in the following areas: • Arc welding: One of the main application areas for this type. Dkjdpfx Ake Ahpyre Ajw • Material handling & machine loading: Fast handling of components. • Process applications: Cutting, deburring, grinding, polishing, and applying adhesives or sealants. Compatible controllers Depending on the year of manufacture and generation, the IRB 2400 is operated with different ABB controllers: • Older models: S4, S4C, or S4Cplus controllers. • Modern/current models: Usually equipped with the IRC5 controller (M2004) or the newer OmniCore systems.

Condition: good (used), functionality: fully functional, machine/vehicle number: 10575, Year of construction: 1995, load capacity: 4,500 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Briggs & Stratton, overall weight: 9,800 kg, empty load weight: 9,800 kg, total height: 3,500 mm, total length: 5,000 mm, total width: 2,700 mm, Equipment: lighting, A very well-maintained side loader is offered for sale. It is in good technical condition and is a truly robust machine. Djdpfx Akjzu Stis Askw

Condition: used, Year of construction: 1998, No minimum price – guaranteed sale to the highest bidder! Dkjds Ahgluepfx Ak Aow DDMQ-F I I 390 TECHNICAL DETAILS Capacity: 10–100 pieces/min Cutting length: 140–350 mm Max. cutting length: 900 mm Product width: max. 200 mm Product height: max. 80 mm Film width: max. 600 mm Film outer diameter: max. 300 mm MACHINE DETAILS Rated power: 30 A / 6 kW Dimensions & Weight Dimensions (L x W x H): 5,125 x 1,400 x 1,450 mm Weight: approx. 1,100 kg Power supply: 3-phase, AC 200 V Permissible voltage fluctuation: ±10 % FUJI DDMQ-F 1 3391 TECHNICAL DETAILS Capacity: 10–200 pieces/min Cutting length: 90–150 mm Max. cutting length: 900 mm Product width: max. 140 mm Product height: max. 40 mm Film width: max. 430 mm Film outer diameter: max. 300 mm MACHINE DETAILS Rated power: 30 A / 6 kW Dimensions & Weight Dimensions (L x W x H): 4,625 x 990 x 1,450 mm Weight: approx. 1,000 kg Power supply: 3-phase, AC 200 V Permissible voltage fluctuation: ±10 %

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Dksdewuz Ekepfx Ak Asw Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: excellent (used), Year of construction: 2024, 259 USED Arabic Bread Line, Oven Line: TECHNICAL DATA: - capacity: 3500-9000 pieces/h, - diameter: 15-38 cm, - number of rows: max. 3, - working width: 100 cm. - year of manufacture: 2024. EQUIPMENT: - divider, - pre-proofer, - rolling, - final proofer, - tunnel oven + 2 burners, - cooling conveyor: 80 m, - stacker (folding and counting devices). Dedpjzix Amjfx Ak Ajkw The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Capacity of up to 90 bottles per minute. 9-meter conveyor infeed (double lane) and 15-meter conveyor outfeed in a U-shape. Cosmotec cooling unit for the electrical cabinet. 4 reels (2 x 2) can be used simultaneously on the machine, with an accumulation unit to prevent downtime during reel changes. Dsdpfxj Ahybxs Ak Aokw

Condition: used, Year of construction: 2009, machine/vehicle number: 19727, with CNC control, manufactured by HEIDENHAIN, type: ITNC 530, travel distances: X-axis: 800 mm, Y-axis: 600 mm, Z-axis: 500 mm, with automatic tool changer with 30 tool positions, with coolant system, chip conveyor, manufactured by KNOLL, type: 340 K-1, machine weight: 7000 kg, spindle operating hours: 13,122 hours. Djdo Af Nlxopfx Ak Askw

Condition: used, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Djdpfxozlivpe Ak Ajkw Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: used, Year of construction: 2007, grinding wheel diameter: 400 mm, table load: 800 kg, grinding wheel width: 100 mm, overall weight: 5,700 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, Horizontal Surface Grinding Machine Manufacturer: ABA Z&B Model: ECOLINE 806 E Year of manufacture: 2007 Control system: SIEMENS 840D powerline Dkedpfxozy Sins Ak Asw Technical details: Spindle motor: 11 kW Grinding wheel diameter: 400 mm Grinding wheel width: 100 mm Max. table load: approx. 800 kg X-axis: 800 mm Y-axis: 700 mm Z-axis: 600 mm Machine weight approx.: 5,700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, input voltage: 24 V, type of input current: DC, B&R X20CP3585 PLC Control CPU Module – X20 System High-performance PLC central unit with an Intel Atom processor for industrial automation and control applications. Manufacturer: B&R Industrial Automation Model: X20CP3585 Series: X20 System Device Type: PLC Control / CPU Module Condition: Used Dkjdpfxj Ah T Uao Ak Aow Processor: Intel Atom E640T Processor Clock Speed: 1 GHz Working Memory: 256 MB DDR2-SDRAM User RAM: 1 MB SRAM L2 Cache: 512 kB Retentive Variables: Max. 256 kB Program Memory: CompactFlash slot Integrated I/O Processor: Yes Interfaces: 1x RS232, 1x Ethernet, 1x POWERLINK, 2x USB, 1x X2X Link Ethernet: 10/100/1000 Mbps POWERLINK: V1/V2, 100 Mbps USB: 2x USB 1.1/2.0 Type A RS232: Max. 115.2 kbit/s Expansion Slots: 3 for X20 interface modules Shortest Task Class Cycle Time: 200 µs Typical Instruction Cycle Time: 0.0044 µs Controller Redundancy: Supported Supply Voltage: 24 V DC (-15 % / +20 %) Power Consumption: 8.8 W (without interface modules and USB) Cooling: Fanless Operating Temperature: -25 to +60 °C in horizontal mounting position Protection Class: IP20 Dimensions (W x H x D): 200 x 99 x 85 mm Weight: Approx. 470 g

Condition: used, Year of construction: 2017, operating hours: 1,452 h, functionality: fully functional, machine/vehicle number: Roboter: 2600-107871 / Steuerung: 2600-107871, overall weight: 417 kg, load capacity: 12 kg, arm reach: 1,850 mm, ABB industrial robot featuring an IRB 2600-12/1.85 Type B manipulator and an IRC5 Single controller, designed for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. It has a payload capacity of 12 kg and a reach of 1850 mm. Manufactured in 2017, it has 1452 operating hours and is running RobotWare Version 6.04.01.00. It is equipped with two cable sets for power and control connections, a FlexPendant DSQC 679 teach pendant, a transport frame/mounting base located under the manipulator, and the software options World Zones, Path Recovery, and Collision Detection. Dkjdezak Htjpfx Ak Aow

Condition: new, Year of construction: 2022, You have a Behringer saw and your control panel is defective, the membrane keypad is broken, but the machine is still too good to replace. The BT 41 is a very common control panel and we can repair it for you! Please contact us. Dodpfx Aetv Ip Ijk Ajkw

Condition: good (used), Year of construction: 2012, CNC lathe TAKANG TNC-N200DS-B Control: Fanuc 0i-TD Configuration: Twin spindle, inclined bed, 12-station servo turret Swing over bed: Ø 650 mm Max. machining diameter: Ø 490 mm Max. machining length: 510 mm Main spindle nose: A2-6 Main spindle bore: Ø 61 mm Main spindle bar capacity: Ø 51 mm Main spindle bearing (ID): Ø 100 mm Main spindle hydraulic chuck: 8″ Main spindle speed range: 42 – 4,200 rpm Dkodpfj Agcrgex Ak Aew Sub spindle nose: A2-5 Sub spindle bore: Ø 56 mm Sub spindle bar capacity: Ø 45 mm Sub spindle hydraulic chuck: 6″ Sub spindle speed range: 60 – 6,000 rpm Sub spindle stroke (E axis): 500 mm Turret: 12 stations, servo X-axis travel: 280 mm Z-axis travel: 560 mm Rapid traverse X / Z: 20 m/min Tool change time: 0.2 sec Tool holder: □ 20 mm Max. boring bar: Ø 32 mm Main spindle motor: Fanuc 18iP, 9 / 11 kW Sub spindle motor: Fanuc 6i, 5.5 / 7.5 kW Hydraulic pump / tank: 1.5 kW / 60 l Coolant pump / tank: 750 W / 100 l Machine weight: 7,030 kg Year of manufacture: 2012 (July) Manufacturer: CNC-Takang, Taiwan For more information, please contact us.