Used Optimization for sale (3,225)

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Model: ACS WZH10-4080-2 BT Angelantoni Walk-in Climatic Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and is equipped with advanced safety features specifically tailored for battery and accumulator testing (e.g., lithium-ion). Special feature: Safety equipment for battery testing: The system is specially equipped for battery and accumulator testing, including: - Pressure relief flap for controlled pressure discharge in the event of a malfunction - Gas detection system for early identification of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → Ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research tests - Endurance, aging, and stress tests Technical data (from nameplates & documentation) General: Model: WZH10-4080-2 BT Duedpfsyg I Eyex Afnjn Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climatic chamber, double-door Test range: Temperature: –40 °C to +80 °C Relative humidity: 10% to 95% RH Electrical data: Supply: 400 V 3-phase + N + PE 50 Hz Rated power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit strength: 10 kA Refrigeration system Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: External dimensions (approx.): Length: ~4.5 m Width: ~2.2 m Height: ~2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (See photo) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Year of construction: 2019, condition: good (used), Weiss Model: WK 10/40-80 Modular Environmental Test Chamber Weiss WK 10/40-80 Special equipment for battery testing: The climate test chamber is equipped with enhanced safety features for battery and cell tests (e.g., lithium-ion): • Pressure relief flap for controlled pressure discharge in the event of a fault • Gas warning system for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators This equipment significantly increases safety during battery testing and supports use in development and test environments (subject to customer-specific safety concept/BMS). Description: For sale is a professional environmental test chamber by Weiss Technik, Model WK 10/40-80, year of manufacture 2019. The unit is used for temperature and climate testing, making it ideal for industry, research, development, and quality assurance. The system enables temperature and humidity testing over a wide range and is designed for continuous operation in industrial and development laboratories. The chamber is particularly suitable for: - Functional and service life tests - Material and component testing - Pre-aging and climate simulation - Conditioning of samples - Testing of batteries and accumulators (e.g., lithium-ion) under defined climate conditions (with the appropriate customer-side safety concept/BMS) Operation is via a modern S!MPAC® control system with web panel; programs can be stored and automated. The unit was in use until recently and is fully functional. General Information: Dsdpfxjygvw Rs Afneun Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Year of manufacture: 2019 Condition: used, functional CE marking: available Made in Germany Control: S!MPAC® control Web panel / touch operation Program and time control possible Temperature & Climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10% to 95% rH Humidity accuracy: ± 5% Dimensions: External dimensions (W×D×H): approx. 3300 × 5000 × 2500 mm Internal dimensions (W×D×H): approx. 3000 × 2200 × 1500 mm Media & Systems: Spray system: Water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical Data: Power supply: 3/N/PE, 400 V AC ±10%, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Environmental test chamber Weiss Technik WK 10/40-80 Control system / web panel Operating manual (German) Nameplate & documentation Condition: used Scope of delivery: (see picture) (Modifications and errors in technical data and specifications excepted!) For further information please feel free to contact us by phone.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1.073.14, TECHNICAL DETAILS Infeed table length: 8,360 mm Outfeed table length: 2,750 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,000 x 2,400 x 2,400 mm Weight: 2,500 kg Transport packages: 3 units Voltage: 400 V Fuse: 25 A Power: 11.0 kW EQUIPMENT Dsdpfxeygilhj Afneun Automatic feed system

Condition: used, Year of construction: 2002, total height: 1,870 mm, total length: 2,100 mm, total width: 2,720 mm, Weight: 1.600 kg Price: On request - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 595001 3 16 Dedpfx Afoyf H H Heneun - Main motor power [kW]: 6.5 - Voltage [V]: 400 - Current consumption [A]: 15 - Fuse [A]: 20 - Transport dimensions: 2100mm x 2720mm x 1870mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Edging line edger with optimization PAUL AB920 - in a warehouse - German production - DTR - optimization of the cutting width - cross cut saw - automatic disc spacing Duedjia Nypopfx Afnsn TECHNICAL PARAMETERS: - max. workpiece width 920 mm - max. workpiece height 90 mm - max. workpiece length 6000 mm - main engine power 37 kW - disc diameter max. 300 mm - spindle diameter 60 mm - sleeve diameter 70 mm - fixed sleeve 60 mm long - floating sleeve for 1 disc - floating sleeve with a spindle 100 mm long - number of measuring heads 15 - spacing of measuring heads 350 mm - distance between the measuring heads - total feeder power 10 kW - cross-cut saw for cutting the material to a length of 2630 mm - saw leveling the material - cascade for transporting the board - hydraulic feed with smooth speed regulation - hydraulic material pressure - hydraulic material height adjustment

Condition: used, Year of construction: 2002, total height: 1,600 mm, total length: 9,000 mm, total width: 2,400 mm, Weight: 2.500 kg Price: On request - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: 1073.14 - Input table length [mm]: 8360 - Output table length [mm]: 2750 - Options: Automatic pusher system - Voltage [V]: 400 - Fuse [A]: 25 - Power [kW]: 11.0 - Transport dimensions: 9000mm x 2400mm x 1600mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Dujdpjyddkasfx Afnjn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Djdpfx Afjw Sy T Henjun Storage location: Nattheim

Condition: used, Year of construction: 2005, total height: 1,750 mm, total length: 1,350 mm, total width: 1,350 mm, Optimization cross-cut saw Stromab TR 500 Dujdpfewq U Dxox Afnon Matrix 4 4000 Year of construction 2005 Engine power 10 hp Auto push-up system Inkjet printer - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 250143 - Main motor power [kW]: 7.5 - Max. saw width [mm]: 375 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 4300 - Output table length [mm]: 2000 - Transport dimensions: 1350mm x 1350mm x 1750mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, Single-sided edge bander designed for precise and stable edging of solid wood and panel components (chipboard, MDF, laminate). The machine is conceived as a compact yet fully equipped solution for small- and medium-batch production, with an emphasis on edge processing quality. A robust cast iron frame ensures high rigidity and long-term geometric stability of the machine. It features a classic continuous conveyor with a pressure belt and a complete set of machining units for finishing the edge in a single pass. Technical configuration of the machine: - Pre-milling unit - Material pre-heating - Automatic EVA glue application Dodpjyfw Syofx Afnsun - EVA glue roller - Front and rear end trimming saws - Rough trimming unit - Corner rounding unit - Radius scraper - Glue scraper - Grooving unit - Brushing unit - Return conveyor

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Metal Technika OWD 1600 Optimizer - manufactured in Poland - year of production 2017 TECHNICAL PARAMETERS: - cutting width 250 mm - cutting height 120 mm - Capacity from 3 200 to 8 150 mb /8 h - sorting table with 5 knockouts - Electronics Controller with color touch screen display "MITSHUBISHI" - Features - full optimization of 30 dimensions in two quality classes, - creation of cutting programs for different customers, - cutting at the point of marking with fluorescent crayon, - margin cutting (beginning and end of the input material) - cutting in packages (several elements at once) - meters, total, shift, operator, monthly counters, - cutting accuracy ±0.2 mm - Motor 5.5 KW (saw Ø500 - 140z) - Width of input mat 12 - 250 mm max. width / height ( 250 / 50 mm) - Height of input mat 12 - 120 mm max. h/w ( 120 / 130 mm) Dsdpfsrx Rxpjx Afnjun - Input mat length up to 4,200 mm - Lubrication Oil central lubrication system - Automation at the output Connection for slant conveyor and sorting table

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, ### Weinig Dimter OptiCut 350 – Optimizing cross-cut saw The Weinig Dimter OptiCut 350 is a high-performance Optimizing cross-cut saw widely used in the woodworking industry for precise cut-to-size operations with simultaneous material optimization. This machine ensures high-speed, accurate cutting, maximizing raw material efficiency while minimizing waste. Year of manufacture: 2005 Technical condition: Very good --- Technical Specifications: 1. Input material length: - Maximum length: 6,200 mm - Minimum length: 500 mm 2. Material width: - Maximum width: 300 mm - Minimum width: 40 mm 3. Material thickness: - Maximum thickness: 100 mm - Minimum thickness: 15 mm 4. Cutting speed: - Maximum cutting speed: 250-350 cuts per minute - Feed speed: up to 200 m/min 5. Cutting tool: - Saw blade rotational speed: approx. 3,000 RPM Duedpfx Asv Dm U Rjfnjn 6. Control system: - CNC control with an advanced PLC system for precise cutting process management. - Optimization data input to maximize material utilization and minimize waste. - Touchscreen interface for easy machine operation and parameter input. 7. Optimization system: - Equipped with a defect recognition system (manual or automatic defect marking) to eliminate defective sections during cutting. - Length optimization function based on production requirements (e.g., minimizing waste, maximizing output of specific lengths). 8. Material feeding system: - Automatic feeding system for seamless material input. - Integrated conveyors and transport systems for efficient material flow through the machine. 9. Waste management: - Automated waste removal and sorting system to separate defective wood fragments. - Number of ejectors: 9 unit 10. Cutting accuracy: - High precision cutting with an accuracy of ± 0.5 mm, depending on wood parameters and machine settings. 11. Power supply: - Standard power supply: 400 V, 50 Hz --- ### Additional Features: - Automatic defect marking: The operator can mark defects on the wood (e.g., knots, cracks), and the machine automatically optimizes the cutting process to avoid these sections. - Safety features: Equipped with modern safety systems, including lock sensors and protective covers. --- Applications: The Weinig Dimter OptiCut 350 is ideal for woodworking industries, especially in facilities producing structural wooden components, furniture parts, and solid wood processing plants. Thanks to its optimization capabilities, this machine significantly increases productivity and efficiency while reducing material waste.

Condition: excellent (used), Year of construction: 2017, Optimizer Salvador SuperCut 500 Year of production: 2017 Technical condition: very good Technical data: - Maximum installed power: 11.5 kW - Saw motor power: 5.5 kW - Maximum material cross-section: 300x60 - Minimum cross-section of the element: 35x15 mm Dedpfx Aouyfx Rjfneun - Minimum piece length: 1000 mm - Cutting time: 0.1 - 1 s - Feed speed: 0 - 150 m/min - Number of ejectors: 10 Installation and operation training available at extra charge

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CURSAL TRV 1200L 550 Year of manufacture: 2018 Technical condition: very good Dusdpfxox I R Eyo Afnjn

Condition: used, Year of construction: 2025, Dimensions (L/W/H) 6400x1500x1780 mm Total power requirement 19 kW Weight 1800 kg Djdpfjwt Ua Eox Afnoun Arbeits- und Platzersparnis, sicherer binierbar mit einer Hochgeschwindigkeits-Vierseitenfräse zu einer effizienten, automatischen Produktionslinie.

Condition: good (used), Year of construction: 2005, saw blade diameter: 800 mm, overall weight: 2,960 kg, 15 kW; 400 V; Duedeygk Haepfx Afnjn

Condition: excellent (used), functionality: fully functional, Grecon Dimter OptiCut 304R Optimizing Cross-Cut Saw Minimum input wood length: 500 mm with loading onto support table Minimum input wood length: 900 mm with loading via cross chain conveyor Maximum input wood length: 6300 mm Dujdsx Up Nqjpfx Afnsn Wood width min./max.: 40-200 mm Wood thickness min./max.: 15-80 mm Maximum wood cross-sections: 200×25 mm, 170x50 mm, 80x80 mm, 140×60 mm Saw blade diameter: 400 x 30 mm Saw blade rotational speed: 4200 rpm Maximum feed rate: 230 m/min Cutting modes: - Fixed length cutting - Lumber length optimization for maximum yield - Defect removal with chalk defect marking

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, saw blade diameter: 500 mm, cutting height (max.): 89 mm, cutting width (max.): 200 mm, Optimizing cross-cut saw PAUL C11 MKL Year of manufacture: 2014 Dusdpfxsx H Uaxs Afnsn The machine is equipped with a measuring station and 5 ejectors. Technical specifications: Cutting height: 3 - 89 mm Width: 30 - 200 mm Minimum workpiece length: 300 mm Saw blade diameter: 500 mm Saw motor power: 5.5 kW

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, The machine is currently in use. We offer live demonstration, dismantling loading, installation and training on your site Dsdpfxov Uab Eo Afnsun

Condition: excellent (used), Optimizing cross-cut system GreCon type 2004 with infeed cross conveyor with outfeed conveyor with 4 ejectors with chain bed Technical specification: Max. width of workpieces: 250 mm Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Saw motor: 5,5 kW Control saw shaft: pneumatic Drive chain: servo motor Min. working width: 40 mm Dsdpfsn Hwl Aox Afnoun Min. input length: 500 mm Net weight: approx. 1.800 kg was overhauled and then no longer used Location: Austria, near Ried im Innkreis

Condition: refurbished (used), C11 MKL Cross-Cut Optimization Line, offered by Wood Expert Industry, is a state-of-the-art technological solution designed specifically for industrial wood processing and operational workflow optimization in woodworking facilities. All equipment comprising the processing line is manufactured by Paul Germany and was completely overhauled in July 2025 with zero operating hours. Paul C11 MKL Lumber Optimization Line Components - 9.0 m / 230 mm Inclined Conveyor Belt Ideal for the automatic and efficient handling of wood pieces towards the processing area, equipped with a guided belt and robust clamping parts for stable transport. - Measuring Station with Luminescent Scanner and Photocell Allows precise identification of the start and end of workpieces, featuring dedicated lower rollers for high-accuracy measurements. - Pressure Roller Unit Ensures correct alignment and pressing of pieces between 250 and 4200 mm, with manual adjustment available according to the material thickness. - Reinforced Marking Rails, Left and Right Automatically pre-marks cutting positions for increased efficiency and accuracy in subsequent processing. - C11 MKL Optimizer – CNC Cross-Cut Saw Station Includes a robust welded steel frame, 500 mm TCT blade, 5.5 kW servo-driven motor, variable speed, and an advanced feeding system with lower/upper rollers for precise piece guidance. Electric adjustment of the upper rollers allows automatic adaptation to wood thickness. The system features automatic waste extraction, extraction ports, CE safety compliance, and advanced cutting quality options (blade with 132 conical teeth). - Waste Extraction System Comprises an 11.5 m / 230 mm conveyor belt and ascending waste belt (3.0 m / 500 mm with collection hopper), optimizing material flow and disposal of residues. - Length Sorting System With pneumatic ejectors and basic sorting equipment, this facilitates automatic organization and discharge of pieces to two outfeed positions, increasing line productivity. - Maxi8 Premium Operator Terminal and Optimization Software 17” touchscreen terminal, dust-protected, remote diagnostics, Linux-based, with dedicated optimization software (up to 60 cutting lists, 9 grading options, 400 preset lengths/list), advanced statistics, network integration capability. Includes data import/export options via USB. - Control and Automation Equipment Standardized electric cabinets, control panels, complete installation and wiring performed with high-quality components for intensive industrial use. Duedsw Emf Rjpfx Afnsn Benefits of integrating this line: - Fully automated cross-cutting process, significantly reducing human error. - Increased efficiency and yield through cutting list optimization and automatic length sorting. - Adaptability to various thicknesses and sizes of workpieces. - Advanced digital control and remote diagnostics for quick interventions. - High reliability, reduced maintenance costs, and adherence to strict CE safety standards. This optimization line can be customized for different types of wood processing facilities, ensuring efficient operation tailored to every client’s requirements.

Condition: used, Year of construction: 2002, functionality: fully functional, planing width: 280 mm, working height: 80 mm, overall weight: 2,500 kg, NEW PRICE LAST CHANCE TO TEST THE MACHINE – SCHEDULED DISMANTLING ON JANUARY 30TH For sale: WEINIG Opticut 150 cross-cut optimizing saw. Djdpfxjxvyt Te Afnoun The machine has been with our company since new. Good condition, regularly serviced, in continuous operation. Viewings and on-site testing possible. A new infeed belt is included – not yet installed.

Condition: used, Year of construction: 2005, total height: 1,200 mm, total length: 8,120 mm, total width: 850 mm, Weight: 1.240 kg - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 535 - Main motor power [kW]: 6.0 - Min. saw blade diameter[mm]: 500 - Max. saw blade diameter [mm]: 550 - Options: Automatic pusher system - Voltage [V]: 400 - Power [kW]: 6.0 - Transport dimensions: 8120mm x 850mm x 1200mm (l x w x h) Dusdpfxox A S Upj Afnon - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 647-1806 POS21, WEINIG stacking unit, in very good condition, fully automatic stacker with max. stack size 5m x 1m x 1m, max. 9 stacking laths per layer, €49,000. Throughfeed optimizing saw CRP 600 for chalk, €11,000. Machines are in continuous production – viewing is welcome. Dsdpfxexzk S Rs Afnoun

Condition: ready for operation (used), Year of construction: 2003, This DIMTER S50 Opticut was manufactured in 2003. A robust optimizing cross-cut saw, it features a processing length of 5 m and a saw blade diameter of 500 mm. A new Movidrive converter was installed in 2018, enhancing its performance. If you are looking to get high-quality cutting capabilities, consider the DIMTER S50 Opticut machine we have for sale. Contact us for more information about this machine. Application Types Duedpfjx D Hxrex Afnjn Sawing (Wood)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Duodpfjv A Htksx Afnen Weight 1500 kg Total power requirement 10,2 kw