Used Hydraulic Surface Grinding Machine for sale (75,060)

Condition: excellent (used), PERFECT PFG-70150AHRD Surface Grinding Machine Year 2014 Table size 700 x 1500 mm Maximum longitudinal travel 1650 mm Maximum cross travel 760 mm Maximum distance table surface to spindle centre 600 mm Table speed 5 – 25 m/min Magnetic chuck size 700 x 1500 mm Spindle speed 1450 rpm Spindle motor 7.5 kW (10 HP) Grinding wheel size 355 x 40 x 127 mm Floor space required 4810 x 2550 mm Weight 7800 kg Ijdpfxszuxt As Ap Djbc Supplied with: Automatic Downfeed System, 1500 x 700 mm Electromagnetic Chuck, Demagnetising Unit, 2 Axis Digital Readout, Remote Handwheel, Spindle Motor Speed Inverter Control, Automatic Paper Strip Filter & Magnetic Separator, Machine Pads & Levelling Bolts, Low Voltage Work Light. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27039 Machine Serial Number: 1485022 Cost: £49,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 1984, Second hand tangential grinding machine Brand: Txurtxil Model: NX Machine serial number: 1984 Isdperfwzlofx Ap Debc All automatic movements, including Z axis. Characteristics: Grinding capacity: 600x300mm Magnet table dimensions: 500x200mm Power: Three phase 380V Total power: 7CV

Condition: ready for operation (used), functionality: fully functional, ELB SWN 5 VA / Horizontal surface grinding machine -Grinding area X/Y/Z 525x375x255mm -Magnetic table 700x300mm -Table clamping surface 900x250mm -Table longitudinal travel 10 - 625mm -Table load max. 280 Kg -Table feed rate 1 - 30 m/min Ibodpfx Apoz Sr Umo Dec -Oscillating grinding 3 - 30 m/min -Distance from table to spindle center 525mm -Vertical feed rate 2 - 180 mm/min -Step size adjustable 0.001 - 2mm -Grinding wheel speed 3000 rpm -Coolant system -Machine feet -Documentation -Complete technical data, see photos Dimensions: L x W x H 2.7 x 2.2 x 2 meters / Weight 3500kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 1107, total height: 1,700 mm, total length: 1,000 mm, total width: 900 mm, overall weight: 350 kg, For sale is a compact surface grinding machine from the German manufacturer Degen. Model FSM300E. In very good used condition. The machine has seen little use. A very high-quality and precise machine, ideal for tool or prototype construction. Due to its small footprint, it is also suitable for small workshops. Grinding length: 300mm Cross travel: 170mm Max. distance between magnetic chuck and grinding wheel: 290mm Rapid traverse in height adjustment Magnetic chuck: 300x150mm Space requirement: length 1.0 m x width 0.9 m x height 1.7 m Machine weight: approx. 350kg Includes coolant system, electromagnet, wheel dressing device, and extraction system. The machine runs perfectly and grinds with precision. Can be tested while powered on. Isdpfx Apoz E S Hbj Dobc Location: 5023 Salzburg.

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding length: 450 mm, grinding width: 150 mm, total height: 2,129 mm, total length: 1,940 mm, total width: 1,317 mm, workpiece weight (max.): 120 kg, grinding height: 510 mm, grinding wheel diameter: 205 mm, distance table to spindle center: 510 mm, table length: 510 mm, table load: 120 kg, type of input current: three-phase, table width: 150 mm, overall weight: 1,250 kg, grinding spindle motor power: 1,500 W, travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, rotational speed (max.): 2,400 rpm, grinding spindle speed: 2,400 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, 2001 Okamoto ACC-450DXA Surface Grinder | 450 x 150mm Used 2001 Okamoto ACC-450DXA Hydraulic Surface Grinding Machine for Sale – 450 x 150mm Grinding Capacity – Automatic Grinding Cycle – Spare Grinding Wheels Included Manufacturer: Okamoto Model: ACC-450DXA Machine Type: Hydraulic Surface Grinder Year: 2001 Condition: Working Well Includes: Coolant Equipment Magnetic Chuck Cross Feed Digital Display Vertical Digital Display Wheel Guard Spare Grinding Wheels Machine Description Used 2001 Okamoto ACC-450DXA precision surface grinder available for sale. The Okamoto ACC-450DXA is a compact, high-quality hydraulic surface grinding machine designed for accurate flat and form grinding applications in precision engineering, toolrooms, mould and die shops and general manufacturing environments. The machine provides an approximate 450 x 150mm grindable surface, with 530mm longitudinal table travel and 175mm cross travel, making it particularly suitable for precision grinding of small and medium-sized components. The DXA version features an automatic grinding cycle, combining hydraulic table movement with controlled crossfeed and vertical grinding functions to provide repeatable production grinding while remaining straightforward to set and operate. This machine is supplied with a selection of spare grinding wheels. Main Specifications Manufacturer: Okamoto Model: ACC-450DXA Year: 2001 Machine Type: Precision Hydraulic Surface Grinder / Surface Grinding Machine Grinding Capacity Maximum Grindable Surface: Approx. 450 x 150mm Table Working Area: Approx. 510 x 150mm Longitudinal Travel: Approx. 530mm Cross Travel: Approx. 175mm Distance from Grinding Wheel to Table: Approx. 60–510mm Maximum Table Load: Approx. 120kg The generous longitudinal movement relative to the 450mm grinding length allows the wheel to clear the component during the grinding cycle. Grinding Wheel & Spindle Grinding Wheel Diameter: Approx. 205mm Ibodpsz Rqk Rjfx Ap Dsc Grinding Wheel Peripheral Speed: Approx. 2,400m/min Grinding Spindle Motor: Approx. 1.5kW The spindle arrangement is designed for precision surface grinding where good finish, flatness and dimensional accuracy are required. Additional Drive Motors Hydraulic Pump Motor: Approx. 0.75kW Crossfeed Motor: Approx. 0.75kW Grinding Head Up/Down Motor: Approx. 0.4kW DXA Automatic Grinding Cycle The ACC-450DXA version is designed to provide an automatic grinding cycle, making it suitable for repetitive precision surface grinding operations. The DX-series design incorporates features aimed at both rough and finish grinding, including: Automatic grinding-cycle capability Hydraulic longitudinal table movement Powered crossfeed Powered vertical grinding-head movement Coarse and fine vertical feed Precision feed adjustment Robust saddle-type construction Hand-finished precision guideways Automatic lubrication system These features make the ACC-450DXA suitable for both one-off toolroom work and repetitive component grinding. Approximate Machine Dimensions Overall Length: Approx. 1,940mm Overall Width: Approx. 1,317mm Overall Height: Approx. 2,129mm Machine Weight: Approx. 1,250kg

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, spindle speed (min.): 10,000 rpm, spindle speed (max.): 60,000 rpm, Equipment: rotational speed infinitely variable, Overbeck overhauled in 2015 and equipped with fast frequency spindle SC3060-V1000, frequency converter SD2T 3.8kVA and cooling unit PHK525 HZ, cooling capacity 550W Ibedou Aqt Eepfx Ap Dec

Condition: ready for operation (used), ABA-WERK Aschaffenburg - Hand lever - FFK surface grinding machine -Magnetic clamping plate: approx. 300 × 150 mm -Working area: approx. 350 × 150 × 150 mm -Grinding length: approx. 350 mm -Grinding width: approx. 150 mm -Max. workpiece height: approx. 150 mm -Grinding wheel dimensions: approx. Ø 200 × 20 × 76 mm -Grinding spindle speed: approx. 2,800 rpm Ibedpfx Apjzr U Sve Djc -Longitudinal table adjustment: manual -Transverse table adjustment: manual -Height adjustment: manual -Magnetic clamping plate: permanent magnet -Machine feet -Grinding wheel guard -Extraction system -Work light -Documentation Dimensions: L x W x H 1.1 x 1.1 x 1.7 meters / Weight 800 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2011, DELTA LC 500 – Circular table grinding machine - CE marking - Year of manufacture 2011 - Magnetic table – Rotary table 500 mm - Max. grinding diameter 500 mm - Distance column – grinding spindle axis 315 mm - Grinding height max. magnetic clamping plate – grinding wheel 215 mm - Grinding spindle speed 2840 rpm - Fine adjustment via micrometer 0.01 mm - Coarse adjustment (height adjustment) motorized via keyboard - Spindle motor 3 kW - Dimensions of the grinding wheel 200x80x78 mm - Machine enclosure - Coolant system - Documentation Ibedpfxozkvz No Ap Doc Dimensions: L x W x H 1.3 x 0.8 x 1.8 meters / Weight 800 kg Errors and omissions excepted.

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, total length: 3,000 mm, total width: 1,000 mm, grinding height: 150 mm, grinding wheel diameter: 300 mm, table length: 1,500 mm, table width: 200 mm, overall weight: 2,500 kg, grinding spindle motor power: 11,000 W, grinding spindle speed: 1,450 rpm, grinding wheel speed: 1,450 rpm, Equipment: documentation/manual, The GRAFS GRfix-1500e is a heavy-duty surface grinding machine designed for rough and high-performance grinding of steel plates. Developed and manufactured entirely in Poland, this model combines robust construction, long service life, and user-friendly electronic control. Main features: - Electromagnetic table 300×1500 mm, S-pole, holding force 120 N/cm² - Grinding motor 11 kW, high-quality Polish production - Segmented grinding wheel Ø300 mm, 6 aluminium oxide segments - Laser sensor for automatic workpiece height detection (as an additional option) - PLC control (Mitsubishi) with 7” HMI touchscreen – programmable grinding cycles (rough pass, automatic downfeed 0.001–0.05 mm, spark-out, pause, auto-stop) - Stepper motor feed with encoder for precise vertical adjustment - Mitsubishi inverter – variable carriage speed 1–16 m/min - Remote diagnostic support via Internet (Wi-Fi connection) - External coolant filtration system MS60 with rotary magnetic drum separator, 150 L tank, and 60 L/min pump - LED 24V working light and internal coolant pipe for table flushing - Powder-coated body: RAL7012 (frame) / RAL7021 (carriage) Mechanical design: - Extremely rigid welded steel body (10 mm thick plates, stress-relieved) - Carriage on PWTR precision rollers for smooth and silent motion - Replaceable hardened steel guide strips - Quick manual positioning of the carriage above the workpiece - Fast up/down movement of the spindle motor for easy tool change - Easy mounting system for the grinding wheel – only three bolts - Maximum workpiece height: 150 mm Optional equipment: - Accordion-type bellows covers - Alternative coolant filtration units (magnetic, paper, or combined) Advantages: - Perfect for rough surface grinding of large steel plates - Designed for high efficiency and long-term stability - Fully European components – Mitsubishi Electric control system - CE conformity, electrical inspection and Polish technical documentation (DTR) included Warranty: 12 months Technical data summary: Parameter Specification Grinding table: 300 × 1500 mm (electromagnetic, S-pole) Max. workpiece height: 150 mm Ibsdpsxmhyiefx Ap Djc Grinding wheel: Ø300 mm, 6 segments Spindle motor power: 11 kW Carriage speed: 1–16 m/min Downfeed: Automatic 0.001–0.05 mm Control system: PLC + 7” HMI Mitsubishi Coolant system: MS60 magnetic separator, 150 L tank, 60 L/min pump Weight: ~2800 kg (depending on configuration) Power supply: 400V / 50Hz Made in Poland The GRAFS GRfix-1500e is a professional surface grinder built for intensive, rough grinding applications where high metal removal rate and long-term precision are essential. A reliable, industrial-grade solution for steel fabrication shops, tool manufacturers, and service centers.

Condition: excellent (used), Delta TP-1200/500 Ibsdsz Eza Ropfx Ap Doc

Condition: used, Year of construction: 2007, functionality: limited functionality, machine/vehicle number: GC 968003, grinding length: 1,015 mm, grinding width: 405 mm, total height: 2,080 mm, total length: 4,280 mm, total width: 1,730 mm, overall weight: 3,500 kg, SURFACE GRINDER CHEVALIER FSG-1640 ADII Table size: 400 x 1000 mm Ibsdez Syqcjpfx Ap Doc Max. grinding length: 1015 mm Max. grinding width: 405 mm Max. distance from table surface to spindle: 620 mm Magnetic chuck: 400 x 1000 mm Longitudinal travel of the table Hydraulic stroke: 1050 mm Max. stroke (manual): 1100 mm Speed: 5 – 25 m/min Speed: 2.9 m/min Automatic travel: 405 mm Transverse travel: 460 mm Spindle drive speed: 1450 rpm Spindle drive power: 5 HP / 4-pole Spindle drive diameter: 355 mm Grinding wheel width: 50 mm Grinding wheel inner diameter: 127 mm Machine dimensions (L x W x H): 4280 x 1730 x 2080 mm Machine weight: 3500 kg

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, grinding length: 450 mm, grinding width: 200 mm, power: 1.5 kW (2.04 HP), input voltage: 200 V, Equipment: documentation/manual, Manufacturer Mitsui MGG CO.LTD Type: MSG-250M Year of manufacture:1981-10 Iodpfjwvga Njx Ap Dobc Maximum grinding width: 200 mm Maximum grinding length: 450 mm Maximum table length movement: 500 mm Maximum table length movement: 250 mm Table movement per handwheel revolution: 6 mm /revolution Grinding spindle speed: spindle: 2900 rpm 50 Hz Standard grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speed: 2900 rpm 50 Hz Grinding wheel bore diameter: 31.75 mm Electric power: 2 HP 1.5 kW 4P 200V 3 phase Weight, approx. 1050 kg

Condition: excellent (used), Year of construction: 2003, Degen FS 2550 Surface Grinding Machine Degen FS 2550 surface grinding machine, manufactured in 2003, in SUPER condition with approximately 100 operating hours. CE compliant!! The machine comes from the Richard-Hartmann School (vocational school) in Chemnitz. Technical data: Year of manufacture: 2003 Clamping area / table size: 500 x 250 mm Max. grinding area: 500 x 250 mm Max. travel (X / Z): 600 x 280 mm Max. distance between spindle nose and table: 490 – 500 mm Max. workpiece weight: 320 kg Dimensions of magnetic clamping plate: 500 x 250 x 80 mm Grinding spindle & feed Grinding wheel dimensions: 355 x 25 x 127 mm (standard) Spindle speed: 1,500 rpm (at 50 Hz) / 1,800 rpm Spindle motor: 2.2 kW (3 HP) Longitudinal feed (X-axis, hydraulic): continuously variable 1 – 25 m/min Ibodjz Rla Hopfx Ap Dsc Transverse feed (Z-axis, automated): 0.1 – 10 mm/ About the machine: Offered is a Degen FS 2550 surface grinding machine, manufactured in 2003, in SUPER condition with approximately 100 operating hours. This universal surface grinding machine is in very good original condition. It comes from a vocational school where it was used only sparingly for training purposes. It has a very easy-to-use control system. A grinding travel of 500 mm in the longitudinal axis and a transverse travel of 250 mm make it suitable for toolmaking, fixture construction, and small-series production. Its extensive standard equipment and ease of operation are characteristic of this series. The stable design of the spindle head and the guide principle with double V-guides in the longitudinal and transverse axes guarantee lasting precision. The intuitive operation of the controls simplifies operation and significantly increases productivity. The guides are regularly lubricated by the central lubrication system. The Degen has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Degen on-site while it is powered up. You can find more surface grinding machines from well-known manufacturers on our website.

Condition: ready for operation (used), JUNG D22 Internal cylindrical & surface grinding machine Ijdpfx Apjztl Rro Dobc - Machine suitable for internal cylindrical and surface grinding - Smallest bore to be ground: 14 mm - Largest bore that can be ground: 150 mm - Grinding length with face grinding attachment: 250 mm - 6 workpiece speeds: 46 - 270 rpm - Spindle head / Swivels to the right and left, each by 30 degrees - Distance from the spindle axis to the center of the table: 250 mm - Largest distance / Workpiece spindle - grinding support: 935 mm - Work table / Tilts forward/backward, each by 5 degrees - Automatic and manual operation - Steady rest - Three-jaw chuck - Replacement grinding spindles (see photos) - Coolant system Dimensions: L x W x H 2.8 x 1.5 x 1.8 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: used, Year of construction: 2011, workpiece weight (max.): 3,600 kg, overall weight: 3,600 kg, Equipment: documentation/manual, CNC Tangential Surface Grinder • Manufacturer: MECCANICHE LODI S.r.l. (Italy) • Model: RT 60.35 CNC • Year of commissioning: April 2011 (Purchased new from VFM Machines SA) • Location: Boécourt (JU), Switzerland • Condition: Very good overall condition, first owner. Sold with its original instruction manuals in French and complete technical documentation. Machine certified to comply with CE standards. 📊 Main Technical Specifications (VFM/Lodi Data): • Grinding length: 600 mm • Grinding width (with grinding wheel width): 400 mm • Grinding height from the table: 400 mm • Maximum longitudinal travel: 750 mm • Maximum transverse travel: 350 mm • Grinding wheel dimensions: 400 x 50 x 127 mm bore • Table travel speed: 1 to 35 m/min (continuously adjustable, driven by two hydraulic cylinders) • Spindle speed: 1,450 rpm (7.5 kW / 10 HP motor) • Net machine weight (machine only): Approx. 3,600 kg ⚙️ Design & Drive System: • High-rigidity cast iron frame and column, cast iron table with honeycomb structure. • Longitudinal guidance by linear slides (centralized automatic lubrication). • Transverse and vertical guidance by high-precision needle rails. • Transverse and vertical movements driven by precision ball screws and high-performance Yaskawa brushless motors. • Integrated Yaskawa frequency converter for continuous speed adjustment and spindle braking. • Micrometric movements via electronic handwheel. • Air / Oil heat exchanger for the hydraulic unit. 💻 Automation & CNC Cycles: • Electrical cabinet with original CNC control system managing the display of vertical/transverse dimensions. • Complete automatic cycles: programming and management of roughing, finishing, spark machining, and feed rates (minimum step of 0.001 mm). • Automatic dressing device on the grinding wheel head, with integrated automatic compensation for grinding wheel wear. ❌ Peripherals NOT included: • Machine sold WITHOUT its magnetic chuck. A quote is currently being prepared for a new chuck at CHF 3,500. • Machine sold WITHOUT its lubrication/sedimentation tank. (Ideal for a workshop wishing to integrate the machine into its own coolant filtration system or install a specific new magnetic chuck). 💰 Sales Conditions: • Asking price: CHF 15,000 (net) (Price negotiable at the machine) • Type of transaction: Professional sale (Swiss VAT will be added if applicable). Iodpez Eru Esfx Ap Dobc • Delivery conditions: EXW / Ex Works (Boécourt, Switzerland). The machine is sold on the ground. Disconnection of fluids and electricity will be carried out by us. Crane operation, loading onto a truck, and transportation are entirely the responsibility and cost of the buyer. • Availability: Immediate. Removal after full payment has been received.

Condition: ready for operation (used), Year of construction: 2008, grinding length: 1,600 mm, grinding width: 630 mm, Surface grinder 1600 x 630 M7163x16100, magnetic table size 1600 x 630, machine length 5400mm, depth 2500mm, height 2600mm. Automatic feeds in the X and Y axes. We are the first owners; the machine is used on average for a few hours a month for service-related grinding. Year of manufacture: 2008. Ibsdpfx Asy Shzaep Doc Power: 22KW, 60A. Shipping costs are borne by the buyer. We can arrange complete container shipping, including packing and loading. Here are two packing options: Option 1 Packing on a pallet + aluminum foil and moisture absorbers Requires a 40' HC container. This is the recommended option, as the vacuum foil and absorbers create a protective barrier against moisture and salt. Cost, including loading and securing the machine in the container: 1800 EUR (net). Option 2 Packing without a pallet, aluminum foil, or absorbers. Loading only into a 40' OT container. Cost: 850 EUR (net). Note: In this case, the machine will be more exposed to moisture and salt. Example cost of TRANSPORT ORGANIZATION SERVICE – freight forwarding (all-in), loading Częstochowa, PL, unloading 121001 India, IN, 40 HC, port-to-port, approximately 40 days: 5,050.00 USD.

Condition: used, Surface Grinding Machine ERNAULT SOMUA FU 660 Travel X: 660 mm Travel Y: 400 mm Travel Z: 400 mm Ibodpfxjz Iz Sle Ap Doc Magnetic chuck BRAILLON 700 x 300 mm Grinding wheel: Ø 355 mm Motor power: 7,5 CV Swivel head Automatic diamond cutting Auto stepover X - Y - Z Lubricant tank Hydraulic Group Voltage: 220 V Tri Length: 2900 mm Depth: 2000 mm Total height: 2200 mm Weight: approx 4,5 T

Condition: used, functionality: fully functional, grinding spindle motor power: 4 W, input voltage: 380 V, Universal surface grinding machine with a horizontal grinding spindle and cross table. Designed for precision grinding of flat surfaces using the periphery of the grinding wheel. Suitable for grinding various metal components. Manufacturer: “Krasny Borets”, USSR Iodpfxoz Hi Skj Ap Djbc Model: 3E711V Table size: 630 × 200 mm Grinding wheel: Ø250 × 40 × 76 mm Spindle motor power: 4 kW Power supply: 380 V Complete with hydraulic unit GS-3E711V-1-UHL4

Condition: good (used), Year of construction: 1990, Year of manufacture: 1990 Control type: CNC Grinding length: 600 mm Grinding width: 200 mm Workpiece height: 375 mm Table load: 100 kg Grinding wheel dimensions: 250x25x51 mm Operating speed: 1-24 m/min Speed: 4200 rpm Drive motor: 5 kW Total power consumption: 7.5 kW Machine weight: approx. 3.2 t Space requirement: approx. 3.7 x 2.1 x 2.1 m Ijdpfsi Hn U Usx Ap Dobc

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 1054, grinding length: 400 mm, grinding width: 150 mm, Table length: 400mm Table width: 150mm Maximum cutting length: 400mm Maximum grinding width: 150mm Ijdpfer Eq U Sjx Ap Dsbc Maximum workpiece weight: 75kg Distance spindle to table: 400mm Table speed 1-24 m./min. Sharpening stone diameter: 25mm Spindle speed: 900 – 4500 rpm. Year of construction: 1979

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Table dimensions: 500 × 250 mm Max. longitudinal travel: 600 mm Max. cross travel: 280 mm Max. vertical travel: 340 mm Distance spindle center–table: 500 mm Max. grinding area: 250 × 500 mm Table speed (longitudinal): 1–25 m/min Cross feed: 0.1–10 mm/stroke Continuous cross feed: 1000 mm/min Grinding wheel dimensions: Ø355 × 25 × Ø127 mm Grinding spindle speed: 1500/1800 rpm Grinding spindle power: 2.2 kW Hydraulic pump power: 0.75 kW Graduation of vertical handwheel: 0.005 mm Machine weight: approx. 1350 kg Accessories, Equipment - Operationspanel with touchscreen - Magnetic chuck: 500 × 250 mm - Integrated dressing unit - Wet grinding device with paper band filter - External hydraulic unit Ibedpfx Asz Szhcjp Dec - Portable electronic handwheel - Machine light - Automatic vertical feed - Machine documentation The machine was barely used and is available for immediate sale.

Condition: good (used), Year of construction: 1994, For sale OERLIKON MATTISON R.P. 5 Vertical Surface Grinding Machine with Magnetic Circular Table – Ø 1100 mm – 45 kW Description: For sale, a vertical surface grinding machine with a vertical spindle and rotary table, manufactured by OERLIKON MATTISON, model R.P. 5. This is a very powerful and robust machine, ideal for quickly grinding large series, as well as for grinding flat surfaces, discs, blades, large rings, or large mechanical parts. Technical specifications: Brand: OERLIKON MATTISON Model: R.P. 5 Diameter of the magnetic circular table: ~1,100 mm (measured with a meter) Spindle power / main motor power: 44 / 45 kW (60 HP) Motor speed: 750 rpm Motor: SELIN Genova (380 V / 50 Hz / 87 A) Included equipment: Large, recessed electromagnetic circular table Separate electrical cabinet (380 V) Ijdpfxszpzynj Ap Djbc Paper filter system / coolant separator with belt conveyor Segment grinding wheel head Control panel on the front

Condition: excellent (used), Year of construction: 2018, Geibel & Hotz FS 640 SC Surface grinding machine Geibel & Hotz FS 640 SC with BR control, manufactured in 2018, in SUPER condition. CE compliant!! The machine comes from the testing department of an engineering company. Technical data: Year of manufacture: 2018 Brand: G+H SCHLEIFTECHNIK Model: FS 640 SD Clamping area: 600 x 400 x 375 mm Table load max.: 600 kg Distance table - spindle center min./max.: 140-525 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Length x Width x Height: 3000 x 2800 x 2500 mm Motor power: 3.7 kW Weight: 2300 kg Ibedpfxsz Rnh Te Ap Djc About the machine: Offered is a surface grinding machine Geibel & Hotz FS 640 SC with BR control. This universal surface grinding machine is in very good original condition. It comes from a company where it was only used for testing purposes. It features a very easy-to-use control system. A grinding travel of 600 mm in the longitudinal axis and a transverse travel of 400 mm make it suitable for toolmaking, jig and fixture construction, and small-series production. A comprehensive standard equipment and the easy operation of the machine characterize this series. The stable design of the spindle head and the guide principle with double V-guides in the longitudinal and transverse axes guarantee lasting precision. The intuitive operation of the controls simplifies operation and significantly increases productivity. The guides are regularly lubricated by the central lubrication system. The Geibel & Hotz FS 640 SC with BR control has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Geibel & Hotz FS 640 SC on site under power. You can find more surface grinding machines from well-known manufacturers on our website.

Condition: used, Year of construction: 1991, grinding length: 500 mm, grinding width: 200 mm, Jung JA500-E Ijdpfx Apjy Iy Ukj Djbc 1991

Condition: used, Year of construction: 2017, Hydraulic flat grinding machine, Bernardo BSG 2040 TDC, used 🧰 Product features • Manufacturer: Bernado • Model: BSG 2040 TDC • Condition: Used, see photos • Color: blue-white • Year of manufacture: 06.2017 • Rated load capacity: 3500 kg • Weight: 1650 kg • Voltage: 400V 💰 Price: €5,900,- net, excluding VAT • Quantity discount: available upon request • Private sale: No minimum order quantity • Shipping costs: available throughout Europe upon request • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Ibodpfx Apszzdf Ds Djc We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excluding VAT, ex warehouse.)