Used Grinding And Polishing Machine for sale (69,998)

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Laedpfx Absyw Rhmsnsc Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection Lodpodzqn Dofx Abnsac - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Condition: good (used), HR 4 automatic polisher Manufacturer: Hau Lajdpfoqmfv Dox Abnsc With 4 working spindles. 1 spindle is used for loading and unloading, two work spindles are in constant use.

Condition: used, Double-sided grinding and polishing machine, MEYER, type SMP Machine no. 848, year of manufacture 1963 Grinding and polishing disc diameter, max. 800 mm Shaft diameter 50 mm Grinding disc mounting, Ø 305 mm Disc spacing 1470 mm Working height 550 mm Speed 710 / 800 / 950 rpm Drive power 2 x 3 kW Mains connection 380 volts, 50 Hz - Two drive motors, one for each working side Ledpfxsdzqmhs Abnjac - Star-delta switch for each drive motor - Speed change by switching the drive belts - Dust extraction flange, Ø 100 mm - Two corundum grinding discs, 40 mm wide, approx. Ø 560 / 480 mm, are installed Space requirement L x W x H 1700 x 1200 x 900 mm Weight 850 kg Good condition

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 2007036, Farros BSA 5185/600 Dish Head Grinding & Polishing Machine (2007) Kombi KS 1200 grinding head 1,000mm minimum grinding diameter Laodpfx Ajy Azb Usbnjc Internal and external grinding -20º to +30º grinding head swivel Skid framed receiver mounted air compressor and dust extraction system

Condition: ready for operation (used), Indumasch Siegen 362 Grinding Pedestal Belt Grinding Machine Grinder -Belt width: 150 mm -Speed: 1400 / 2800 rpm 220V / 380V -Extraction unit You are welcome to arrange an inspection appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations in technical data or errors in the item description may occur and are reserved. Lodpfx Absyyn A Hsnoac

Condition: good (used), Polishing bench, grinding machine, polishing bench, double grinding bench, double grinding machine, pedestal grinding machine, pedestal grinding bench Ledped D R Sxofx Abneac -Drive: 2.2 kW -Speed: 1420 rpm -Assembled brush: 150 mm -Dimensions: 700/800/H1300 mm -Weight: 73 kg

Year of construction: 1977, condition: used, machine/vehicle number: 11 U, Technical data: - Speeds: 850 to 12,000 rpm - Flexible shaft approx. 2 m - Mobile undercarriage Laodpfxewy Ulzj Abnsc - Suitable for grinding and polishing tools - Drive: 380 V / 1.0 HP - Space requirements approx. W 500 x H 1000 x D 500 mm - Weight approx. 45 kg - Mobile undercarriage

Condition: ready for operation (used), - double grinding and plishing machine - 1,5 kW Laedodz Uzbepfx Abnsc - speed 1420 U/min - working hight is 600 mm - conical shaft

Year of construction: 2025, condition: as good as new (ex-display), With 250 mm diameter of grinding wheel - new equipment / demo unit for special price - this machine is a standard machine for manual preparation - optional we offer a specimen mover – please ask for details Machine ready for use: Lodpfx Aoptc Debneac - basic machine disc diameter 250 mm - 250 mm platic grinding table - splash guard - disc cover - connections for cooling water & water drain Optinonal: grinding paper, diamond grinding discs, polishing cloth, diamont suspensions inclusiv delivery by forwarder (Germany) delivery outside Germany on request offer not binding - subject to prior sale

Year of construction: 2018, condition: ready for operation (used), Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible. Lajdpfx Aboxg Rhponec

Condition: good (used), Year of construction: 2001, The system can also grind miters. Connection value: 20.5kW Lsdpfx Aboiqghzonjac Total length: 12500mm

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 5 h, machine/vehicle number: 6178, Exhibition machine: ACETI ART.70 Belt grinding and polishing machine with 2 motors 4.4 kW, 400 volts including 2 inverters T2 The machine is in our test room in Kobenz. Machine is new and has not run! GRINDING UNIT (left) - Sanding belt dimensions: 50 x 2500 - 3000 mm - Drive roller: 50 x ø 250 mm - Belt grinding arm: 0° - 90° - Belt speed: 18 - 36 m/sec Laodpfx Aji Hp Nrjbnoc POLISHING UNIT (right) - for grinding and polishing wheels: 300 x 35 mm - Brush maximum external size: 300 mm - Brush maximum width: 75 mm - Motor shaft diameter: ø 35 mm - Circumferential speed: 22 - 44 m/sec Size: W: 1650 x D: 600 x H: 2200 mm Volume: 73dB Weight: 295kg (without inverter)

Condition: refurbished (used), Year of construction: 2008, functionality: limited functionality, operating hours: 20,000 h, power: 60 kW (81.58 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total width: 11,000 mm, total length: 12,000 mm, air pressure: 8 bar, pressure: 8 bar, Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Laedpfexxaitox Abnsc

Condition: good (used), Year of construction: 2015, operating hours: 250 h, functionality: fully functional, For Sale: Guideway Grinding Machine (Retrofitted from Metal Planing Machine) We offer a robust guideway grinding machine, which has been professionally converted from an original metal planing machine. The main advantage lies in its relatively compact footprint in relation to the workpiece capacity. Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required floor space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel paths (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades & Features: • New ball screw spindles and bearings • 2 new motors + 2 overhauled motors • 3 new frequency inverters • New Siemens SINUMERIK 802C baseline CNC system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Including control cabinet, coolant tank with pump, and separate, wall-mounted inverter for small spindle Laodpfx Absxx Uudjnoc Inspection and trial run possible by appointment. Please contact us for more information.

Condition: new, Year of construction: 2026, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Lsdpfx Asq I Nw Iebneac

Condition: reconditioned (used), Year of construction: 1997, operating hours: 5,929 h, functionality: fully functional, center height: 100 mm, grinding length: 400 mm, center width: 400 mm, grinding wheel diameter: 350 mm, grinding wheel width: 30 mm, The machine was overhauled in 2026! Laedpfsza Ea Iox Abnec TECHNICAL DETAILS Grinding length: 400 mm Center height: 100 mm Distance between centers: 400 mm Max. workpiece weight in the tailstock between centers: 20 kg Grinding wheel diameter max.: 350 mm Grinding wheel width: 30 mm Grinding wheel bore: 127 mm Working feed rate Z-axis: 100 - 3,500 mm/min Table swivel: 0 - 30° Power of grinding spindle motor: 3 kW Speed of workpiece spindle: 30 - 1,200 rpm Power of workpiece spindle: 0.5 kW Tailstock arbor: MT2 Quill stroke: 20 mm MACHINE DETAILS Dimensions & Weight Machine dimensions: 2,350 x 1,480 mm Weight: 1,600 kg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 011.257.90.043, center height: 175 mm, center width: 1,000 mm, controller manufacturer: Fanuc, TECHNICAL DETAILS Maximum center height: 175 mm Distance between centers: 1,000 mm Longitudinal slide Maximum longitudinal slide travel: 1,050 mm Cutting speed (vt): 0.0001–10,000 mm/min Resolution: 0.0001 mm Table tilt: max. 8.5° Cross slide Maximum cross slide travel: 275 mm Lodpfx Abszb Hxnonsac Cutting speed (vt): 0.0001–10,000 mm/min Resolution: 0.0001 mm MACHINE DETAILS Control system manufacturer: Fanuc

Condition: ready for operation (used), Year of construction: 2013, operating hours: 2,780 h, functionality: fully functional, workpiece weight (max.): 150 kg, grinding wheel diameter: 660 mm, center height: 270 mm, center width: 1,700 mm, grinding diameter: 300 mm, spindle speed (max.): 1,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Workpiece Grinding diameter in rotary grinding, max.: 220 mm Grinding diameter in cylinder grinding, max.: 300 mm Rotary diameter over table, max.: 300 mm Passage in the steady rest, min. / max.: 20 / 90 mm Workpiece weight between centers, max.: 150 kg Center height above table: 270 mm Distance between centers: 1,700 mm Grinding length with fixed tailstock: 1,500 mm Grinding length with special equipment: 1,300 mm Diameter of the chuck: 180 mm Tailstock quill travel: 50 mm Grinding wheel Grinding wheel diameter, max.: 660 mm Grinding wheel width, min. / max.: 20 / 80 mm Peripheral speed, max.: 35 / 63 m/s Grinding wheel for concave cam profiles Diameter with electro spindle, min.: 100 mm Grinding wheel width, min. / max.: 20 / 50 mm Peripheral speed, max.: 35 / 50 m/s Grinding spindle head X-axis Laodpfxezarx De Abnec Travel: 490 mm Measuring resolution: 0.0001 mm Workpiece head C-axis Speed range of workpiece spindle: 1 - 1,000 rpm Speed range of contour grinding spindle: 1 - 400 rpm Torque on the spindle: 80 Nm Resolution: 0.0001 ° Table Z-axis Measuring resolution: 0.0001 mm MACHINE DETAILS Drive power of the motors Grinding spindle motor: 7.5 / 15 kW Workpiece motor, C-axis: 12 W Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,600 x 2,000 mm Total weight: 9,850 kg EQUIPMENT Automatic balancing device, programmable Grinding spindle head X-axis with linear motor Optical scale on the X-axis Workpiece head C-axis with encoder Table Z-axis with linear motor Optical scale on the Z-axis Workpiece motor, direct drive type, C-axis Grinding spindle motor, direct drive type Fixed tailstock Tailstock quill Note: The machine can be powered up for inspection for an additional cost of approximately €12,000.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665100, overall weight: 4,700 kg, center height: 125 mm, Round grinding machine with robot! TECHNICAL DETAILS Center height: 125 mm MACHINE DETAILS Control: Fanuc 18i-T Total weight: 4,700 kg Operating hours Automatic cycle time (according to diagram): 41,411 h Feed time (according to diagram): 14,251 h EQUIPMENT Universal Robots UR5 robot Standard accessories 1 grinding wheel set, right-hand, 500 x 110 x 203.2 mm 1 manual swivel chuck for turning parts with manual indexing every 2.5 degrees Automatic balancing device MARPOSS type E 82 Lasdpjzcwfusfx Abnjc Hydraulic quill retraction for the tailstock Stroke monitoring for the tailstock Standard workpiece spindle MK 5 DIN 55026 size 5”

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 32.469.3143, center height: 125 mm, grinding length: 1,000 mm, The machine underwent a partial overhaul in 2009. TECHNICAL DETAILS Maximum height: 125 mm Maximum width: 1,000 mm EQUIPMENT Automatic working cycle Ledpozcwfnefx Abnjac Intermediate plates 50 mm for a maximum height of 175 mm Vibration-damping pads Machine light Internal grinding device for a maximum diameter of 70 mm Internal grinding spindle UJ7P Coolant supply through the workpiece spindle, including protective cover Side and angled dressing device Swiveling dressing device for internal grinding Dressing stop for internal grinding Collet chuck Set of collets Dial indicator stop for table swiveling with a 1/100 mm dial indicator Sine bar Table fixed stop Strip-type filter system SONY digital measuring system, 2 axes Documentation

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Bosch CNC Control Specifications: Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Lasdpfx Abertr D Ionsc Grinding Wheel Size, Usable Width: 65 mm Grinding Wheel Size, Peripheral Speed: 30 ms Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Coolant Flow Rate: 600 l/min Work Capacity (Approx) Rotary: 20 -200 Dia. In.

Condition: good (used), Year of construction: 2011, LANDIS LT-2 TWIN WHEEL CNC ORBITAL CRANK GRINDER Equipped with: Landis 6400 CNC Control Siemens TOUCH HMI Arobetech Steady Rest Marposs P7 Gage System Lateral Locator Twin CBN Grinding Wheels Rotary Dresser Lajdpfxortrxxj Abnjc Headstock Tailstock Rittal AC Units Specifications: Maximum Center Distance: 680 mm

Condition: good (used), Year of construction: 2013, TOYODA (JTEKT) GL32M-63 CNC UNIVERSAL CYLINDRICAL GRINDER Equipped with: CBN Grinding Wheel Flagging Steady Rest Workhead Mounted Rotary Dresser Marposs P3SE System Monitoring Toyoda In Process Gaging Marposs E20N Acoustic Controller Air Gap Eliminator Workpiece Collision Control Coolant Pumps W/Magnetic Separator Pendant Control RH Workhead with Center LH Workhead with Center Work Rests Worklight Light Curtains Stacklight Ljdpfx Absrtrzpjnjac Extra Wheels Specifications: -Grind Center to Floor: 1,000 mm -Swing Over Table: 320 mm -Distance Between Centers: 630 mm -Grinding Diameter Range: 10 - 150 mm -Floor Space (Base machine w/auxiliary equipment): 3,400 x 5,000 mm -Net Machine Mass (approx.): 10,500 kg Grinding Wheel: -Type: CBN Wheel -Wheel Size (OD): 350 mm -Maximum Wheel Width: 60 mm -Surface Speed: 120 m/s Wheelhead: -Spindle Bearing: TOYODA STAT Bearing -Slide: V and Flat -Feed System: Ballscrew -Rapid Feed (on diameter): 30 m/min -Minimum Incsrement (on diameter): 0.0001 mm Workhead: -Type: Dead Spindle -Work Speed (Max): 500 rpm -Center Taper: MT #4 Footstock: -Type: Hydraulic -Taper Compensation: Manual -Maximum Center Retraction: 60 mm -Center Taper: MT #4 Motors: -Wheel Drive Motor: 15 kW, Belt-Drive -Wheelhead Feed Servomotor: 1.3 kW Tank Capacities: -Wheel Spindle Lubrication Oil: 80 L -Hydraulic/Lubrication Oil: 20 L

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t Ledpsxh Rqtefx Abneac dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°