Used Cnc Tool Grinding Machine for sale (66,366)

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Ihjdpfx Asd Rmcmsb Tjw Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: good (used), Year of construction: 1996, functionality: limited functionality, machine/vehicle number: 19046, total height: 2,200 mm, total length: 2,980 mm, total width: 1,470 mm, overall weight: 4,000 kg, - 1 used 5-axis CNC tool grinding machine from Schneeberger with coolant filtration system - Model Gemini PSM, year 1996 with Fanuc Quinto control - General overhaul by Schneeberger in April 2016, hardly used since - Travel: X 360 mm / Y 270 mm / Z 270 mm, center height 210 mm, workpiece holder ISO 50 Ijdpfxjyag I He Ab Tehw - Limited functionality (buffer battery faulty) - Documentation available, on-site inspection possible

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, spindle speed (max.): 7,000 rpm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 4,650 kg, grinding length: 350 mm, center height: 190 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, travel distance X-axis: 490 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, grinding spindle motor power: 24,000 W, workpiece diameter (max.): 320 mm, input voltage: 400 V, nominal power (apparent): 35 kVA, spindle nose: ISO 50, swivel angle A-axis (min.): 360 °, CNC tool grinding machine WALTER Helitronic Power Production TECHNICAL CHARACTERISTICS: CNC control: HMC 500 Software installed: Tool Studio 2.1 R4 Number of axes: 5 Height of centers: 190 [mm] Stroke X: axis 490 [mm] Resolution X axis: 0.00001 [mm] Stroke Y axis: 320 [mm] Resolution Y axis : 0.00001 [mm] Stroke Z axis: 660 [mm] Resolution Z axis: 0.00001 [mm] Traversing feeds X, Y and Z axes: 15000 [mm/min] A axis: 360 [°] C axis: +/- 200 [°] Resolution C axis: 0.0001 [°] Max. workpiece lenght: end face grinding: 320 [mm] Max. grinding length: 350 [mm] Max. grinding diameter: 320 [mm] Grinding spindle attachment: NCT Grinding spindle diameter: 80 [mm] Grinding wheel max. speed: 7000 [rpm] Grinding spindle motor power: 24 [kW] Max. diameter grinding wheel: 200 [mm] Internal workpiece spindle nose: ISO 50 Workpiece spindle max. speed: 60 [rpm] Total power required: 35 [kVA] Weight: 4650 [Kg] EQUIPMENT INCLUDED: x1 TRANSOR 12290-800A filtration unit x1 MTA oil chiller model TAE 015 x1 DSL oil mist extractor model AES-GAMMA 30 x1 RENISHAW part probe x1 disc-type tool loader 40 positions x1 SCHUNK gripper x2 grinding wheel arbor adapters x1 fire protection system - to be inspected by the buyer through a certified organization x1 electrical schematic manual x1 Service Instructions manual Ihjdpfx Absyh Nf Ij Tsw LICENSED WALTER WINDOW MODE (WWM) PACKAGES: - Package 001 (cylindrical mills) - Package 002 (tapered mills) - Package 003 (drills) - Package 004 (step drills) - Package 006 (woodwork tools) - Package 013 (reamers) - Package 015 (insert seats) - Package 016 (warmup program) - Package 027 (flexible program) - Package 090 (loader package) - Package 091 (acm) - Package 098 (loader package) - Package 099 (loader package) - Package 100 (reference data m.) - HELICONE (flute calc. conical.) - HELIDRILL (flute calc. drills) - HELIFLUTE (flute calc. cyl. mill.) - MCS (machine control .) - SCHEIBE (wheels menu) - TS_ADVANCED (toolstudio (v1.0-v.) - TS_STANDARD (toolstudio (v1.0-v.) - TS_STEPTOOLS (toolstudio (v1.0-v.) LICENSED TOOLSTUDIO OPTIONS: - Tool Studio 2.0 server/machinecontrol - Tool Studio 2.0 standard license - Tool Studio 2.0 advanced license - Tool Studio 1.9 upgrade options - Tool Studio 2.0 upgrade options - Option steptools - Option profile light (contour roughing ...) - Option calibration w/ touch probe - Option drills Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Ihodpfx Abjyhvu Ej Tow Manufacturer: MICHAEL DECKEL Type: S20 Turbo Year of construction: 2004 Type of control: CNC Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50

Condition: used, Year of construction: 1995, functionality: limited functionality, machine/vehicle number: 6173, total height: 2,150 mm, total length: 1,420 mm, total width: 2,000 mm, workpiece weight (max.): 3,100 kg, spindle speed (max.): 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, Walter Helitronic Power CNC universal 5-axis tool grinding machine No. 6173 CNC control HMC 400 CNC Iodpfx Ajymmw Ujb Tjhw Travel distance X-axis: 400 mm Travel distance Y-axis: 250 mm Travel distance Z-axis: 580 mm C-axis (table rotation): ± 200° Max. grinding wheel diameter: Ø 200 mm Spindle speed (grinding): 3000 / 6000 rpm Without extraction and coolant pump The machine was in operation until recently. If you have any questions regarding the machine, please feel free to contact us by phone or e-mail.

Year of construction: 2001, condition: ready for operation (used), A CNC 5-axis grinding machine SMP is available. Grinding wheel diameter: 200mm, max. tool diameter: 150mm, max. tool length manual/automatic: 300mm/140mm, max. workpiece weight: 25kg, spindle speed: 20000rpm, spindle power: 7kW, interchangeable magazine: 4 places. Documentation available. On-site inspection is possible. Iodpfx Aju Af Aheb Tohw

Year of construction: 1991, condition: ready for operation (used), Axes: 5, max. grinding wheel diameter: 150mm, spindle speed: 9000rpm, workpiece spindle speed: 1500rpm, clamping spindle speed: 13000rpm, travel X/Y/Z: 200mm/190mm/150mm, tool holder: HSK-50, machine dimensions X/Y/Z: approx. 1700mm/1400mm/1800mm, control: NumRoto 1060, control defective. Including coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection is possible. Ihsdjvu Dfbopfx Ab Tjw

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, feed length X-axis: 360 mm, feed length Y-axis: 150 mm, feed length Z-axis: 230 mm, grinding wheel diameter: 250 mm, rotational speed (max.): 12,000 rpm, swivel angle A-axis (min.): -15 °, swivel angle A-axis (max.): 25 °, swivel angle B-axis (min.): -120 °, swivel angle B-axis (max.): 120 °, TECHNICAL DETAILS Cross axis X: 360 mm Height adjustment Y: 150 mm Feed axis Z: 230 mm Swivel axis B: +/-120° Tilt axis A for grinding head: -15° to +25° Indexing device axis C: C-axis 1,000 rpm Control system: NUM 1060 Grinding spindle drive: 7.5 kW Speed: 12,000 rpm Ihedpfxjxam S De Ab Tjw Grinding wheels: max. 250 mm Grinding spindle: 80 mm, quantity 6 MACHINE DETAILS Machine weight: approx. 4.2 t Space requirement: approx. 2,850 x 2,525 x 2,867 mm EQUIPMENT - Standard software package (grinding software, oscillation, dressing software and measurement software) - Programming in DIN/ISO code - 6-position turret grinding head, tiltable - 3D swiveling measuring station - without probe - Dressing device for automatic dressing of diamond and CBN grinding wheels - Coolant system - Note: Without extraction, grinding wheels and without robot.

Year of construction: 2003, condition: excellent (used), Schneeberger DMR Gemini CNC tool grinding machine TECHNICAL DATA Control: GE Fanuc 160, 5 axes simultaneous Software: Schneeberger Quinto Measuring system X,Y and Z axis: 0.1 μm A-axis: 0.0001° C axis: 0.0001° Grinding head Power: 15 kW speed: 50 - 10`000 rpm spindle nose: HSK 50 Max. wheel diameter: 250 mm Max. Number of grinding wheels: 6 Linear axes X-axis, travel: 380 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Y-axis, travel: 300 mm feed speed: 5`000 mm/min resolution: 0,0001 mm Gear ratio: 24 :4 Power: 1,6 kW / 8 Nm Z-axis, travel: 280 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Rotary axes Ijdpfxjmqni As Ab Tjhw C-axis: 210 ° Speed: 72 ° / s Resolution: 0,0001 ° Power: 1.6 kW / 8 Nm C` axis: +- 180 ° Speed: 90 ° / s Resolution: 0,0001 ° Infeed: Hydraulic A axis: +- 360 ° Speed: 225 ° / s resolution: 0,0001° Power: 1,0 kW Nose: ISO 50 Center height: 210 mm Dimensions and weight Length: 1700 mm Depth: 2270 mm Height: 2260 mm Weight: 8`000 kg We do not guarantee the accuracy, completeness and timeliness of the information.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Online production equipment machine testing available Ihjdpfstr Azksx Ab Tew The roundness within 0.001

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, controller model: PHILIPS, jaw width: 125 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Isdpfx Abeyk Thuj Tshw Bids are binding and require timely collection between 08.04.26 and 16.04.26! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 400 mm Travel Z-axis: 300 mm Table dimensions: 550 x 280 mm Jaw width: 125 mm Tool holder: SK 40 MACHINE DETAILS Control: PHILIPS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 50 A Dimensions & weight L x W x H: 3000 x 2000 x 1800 mm Machine weight: 1500 kg EQUIPMENT Table with 4 T-slots Fitted vice Documentation

Condition: like new (used), Year of construction: 2016, operating hours: 31,881 h, grinding length: 3,350 mm, total width: 3,600 mm, total length: 9,400 mm, total height: 2,000 mm, grinding diameter: 595 mm, distance between centers: 3,000 mm, Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Ihsdpfoyudtpex Ab Tsw Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm): 85 Maximum taper correction (mm): ±0.1 Equipment Tailstock diamond dresser with diamond holder Diamond Grinding wheel guards according to ISO, OSHA, and UNE standard +Two-door enclosure Paper feeder and magnetic separator Grinding wheel balancing shaft MARPOSS electrodynamic balancer Grinding wheel safety sensor Touch-type axial positioner with T25 probe Grinding wheel chuck Driving dog sets Basic machine dimensions / weight Length (mm): 9400 Width (mm): 3600 Height (mm): 2000 Weight (kg): 15000 Air or water through spindle center DXF import function Spindle 2, workpiece unloader Working time hours Under power: 31881 Spindle 1: 8860 Spindle 2: 9774 Rated power kVA: 61 Basic machine dimensions / weight Length mm: 4200 Width mm: 2600 Height mm: 2586 Weight kg: 15000

Condition: good (used), Year of construction: 2002, operating hours: 9,999 h, functionality: fully functional, machine/vehicle number: 120231, Cylindrical Grinding Machine SCHAUDT / Mikrosa PS 51 N 600 Isdpfjxdb R Nsx Ab Tjhw Technical Data – Schaudt / Mikrosa PS 51 N 600 Machine type: Universal / External Cylindrical Grinding Machine Year of manufacture: 2002 Control: Siemens 840D Grinding length (between centers): 600 mm Center height / Height over bed: 180 mm Maximum grinding diameter over bed: approx. 300–360 mm Max. workpiece weight (between centers): approx. 150–200 kg, depending on configuration Grinding spindle power: approx. 22 kW Grinding wheel width: e.g., 220 mm on premium versions; diameter depending on equipment approx. 400–500 mm Grinding wheel speed / surface speed: On some versions approx. 45 m/s; variable depending on equipment Total weight: approx. 10 t

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Used CNC cylindrical grinding machine Make: FORTUNA Type: T23 S1000 ASW 45 CNC Isdsv Eyr Sspfx Ab Tohw Year of manufacture: 1980

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 004-040.0004, CNC Cylindrical Grinding Machine Manufacturer: STUDER Model: S22 CNC Year of manufacture: 2009 Machine / Workpiece Data Distance between centers: approx. 650 mm Center height: 175 mm Maximum workpiece weight: 150 kg Maximum grinding length: approx. 800 mm Linear Axes / Guides X-axis (cross slide): Maximum travel approx. 310 mm X-axis feed rate up to approx. 15,000 mm/min (depending on configuration) Z-axis (longitudinal slide): Maximum travel approx. 850 mm Z-axis feed rate up to approx. 30,000 mm/min Grinding Spindle / Grinding Wheel Main spindle power, e.g. 12.5 kW in the standard version Standard grinding wheel diameter e.g. Ø 500 × 80 × 203 mm, circumferential speed up to approx. 50 m/s Optional high-speed grinding (HSG): e.g. grinding wheel Ø 400 x 40 x 127 mm, circumferential speed up to approx. 140 m/s Control / Software / Equipment Control, standard: e.g. FANUC 31i-A (PC integrated) with StuderWIN operator interface Guideways: Machine bed made from Granitan® S103 (mineral cast) for thermal stability and damping Ihsdextpnzopfx Ab Tow Dimensions / Electrical Data Machine weight approx. 8,500 kg Power supply, typically 400 V / 50 Hz (country-specific)

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Ijdpfeyvg Nqex Ab Tohw

Condition: used, TSCHUDIN GL 600 is a CNC centerless grinding machine designed for precision, high accuracy and reliable operation. Working capacities: grinding diameter 2–100 mm; grinding wheel Ø600 mm × 350 mm; regulating wheel Ø350 mm × 350 mm, swivelling range ±5°. Key specs: grinding spindle stepless, speeds up to 45 m/s; regulating spindle stepless 0–290 t/min; voltage 50 Hz 3x400 V; grinding motor 22 kW; total power 26 kVA; overall dimensions L2300 × W2000 × H2150 mm. Enables tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace and medical sectors Iedpsyn Ra Asfx Ab Tshw

Condition: excellent (used), Year of construction: 2001, 1 CNC cylindrical grinding machine Make: Buderus Model: CNC-335-I-A Year of manufacture: 2001 CNC control: Siemens 840C Largest external machining range: 150 mm Ihedpfjwcrnfjx Ab Tsw Largest swing diameter above table: 310 mm Table strokes X-axis: 1050 mm Z-axis: 300 mm Workpiece speeds NC programmable: 0 - 3000 rpm Infeed speed continuously adjustable: 0.01 - 10 mm/min Infeed stroke dependent: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Machine weight approx.: 7.5 tons

Condition: good (used), Year of construction: 1984, CNC Optical Profile Grinding Machine Wasino GLS-130AS 1984 Ihjdpfx Aep R Rm Isb Tjw

Condition: good (used), Year of construction: 2001, Ref. -No.: 10608 Manufacturer: KEHREN Type: RI 64 Year of construction: 2001 Type of control: CNC Control: Sinumerik 840 D Iedpjym Nd Rofx Ab Tshw Storage location: Halberstadt Country of origin: Germany Table Diameter: 800 mm Grinding Diameter: 1250 mm Max. Table Load: 2000 kg Connection: 92 kVA Machine weight: 18000 kg Rated voltage: 3AC 400 V Rated frequency: 50 V Rated current: 157 A Performance assurance: NH-Sicherung 225 A Max. cabinet internal temperature: 55 °C Temperature change: max. 10 K innerhalb 1 Stunde Altitude max. above sea level: max. 1 K innerhalb Minuten m Further information: Universal application possibilities Highest precision levels Stable cast-iron constructions Hydrostatic bearings on the X and C axes Outstanding long-term accuracy and durability Ergonomic and user-friendly operation Highly energy-efficient Compact, space-saving design Excellent damping properties Machine can be inspected under power.

Year of construction: 2022, operating hours: 2,737 h, condition: used, machine/vehicle number: 110000503, Grinding wheel speed: up to 120 m/s, workpiece weight: up to 80 kg, control system, manufacturer: SIEMENS/MARPOS, type: Sinumerik/P7, 1 automated workpiece unloading station, manufacturer: JOVI, type: 1113A, year of manufacture: 2022, net weight: approx. 300 kg, 1 air filter unit, manufacturer: IFS, type: VARIO M 2000, serial number: 568113, year of manufacture: 2022, net weight: approx. 120 kg, connected load: 400/460 V, 50/60 Hz, 0.7 kW, 1.7/1.6 A, 1 water cooling unit, manufacturer: HASCH, type: MCW-50CT-17AUZ1-3407C, serial number: 1001220302582, year of manufacture: 2022, net weight: approx. 150 kg, tank capacity: approx. 15 l, 1 coolant filtration system, manufacturer: MICRONFILTER, type: Easy 250/KMT350, serial number: 0201, year of manufacture: 2022, tank capacity: approx. 2,300 l, connected load: 400 V/50 Hz, 5.34 kW, 1 immersion cooler, manufacturer: HASCH, type: MCS-120ST-05AOP6R7S6UZ1-3407C, serial number: 1003220400836, year of manufacture: 2022, net weight: approx. 206 kg, 1 coolant tank, manufacturer: MICRONFILTER, type: VR200L/MIN-150L, serial number: 0201, year of manufacture: 2022, tank capacity: approx. 150 l, connected load: 400 V/50 Hz, 1.1 kW, 1 magnetic separator, manufacturer: MICRONFILTER, type: KMT350, serial number: 0212, 1 loading unit, manufacturer: DANOBAT, type: rotary table lift, serial number: 3810490908, year of manufacture: 2022, net weight: approx. 170 kg, max. load capacity: approx. 230 kg, 1 rotary table transport trolley Ihodpfx Aoyn Nlqsb Tsw

Year of construction: 2023, operating hours: 1,376 h, condition: used, machine/vehicle number: 180073, Swivel range: approx. 200 mm, machining length travel: approx. 100 mm, number of axes: 3 axes (X/Y/Z), SIEMENS Sinumerik control, IFS IFMC 1800 air filter unit, year of manufacture: 2021, serial no.: 565760-02, HYFRA E-Chilly 5-400V-S cooling unit, year of manufacture: 2022, serial no.: 10129303PC01240522, cooling capacity: approx. 5,480 m³/32° Celsius, LEHMANN UMT KSS0119 hydraulic unit, year of manufacture: 2022, net weight: approx. 610 kg, comprising: 1 HYFRA TRK-Chilly-45-EF-S cooling unit, year of manufacture: 2022, serial no.: 10132616PC01290722, 1 LEHMANN UMT FB100 chip conveyor, year of manufacture: 2022, serial no.: AUF007093-1, net weight: approx. 80 kg, 1 LEHMANN UMT VMA 100S GM WA magnetic unit, year of manufacture: 2022, serial no.: AUF007093-1, net weight: approx. 60 kg, 1 JOTKEL two-door steel cabinet, contents: various consumables. Iedpfeyn Nldex Ab Tohw

Year of construction: 2018, operating hours: 28,658 h, condition: used, machine/vehicle number: 18E400239, Through-feed grinding, grinding range Ø: 10 cm, plunge grinding, grinding range Ø: 15 cm, weight: 9,000 kg, FANUC 0i-MF control, 2 handling robots YASKAWA YR-MH005LS-E000, serial numbers: R17507-979-3 / R19033-789-1, automation system/workpiece storage EGS Automation Tschudin, year of manufacture: 2018, serial number: 180100, 4-way, oil cooling and filtration system ARO, year of manufacture: 2018, serial number: PRA0032086, protective guard Isdpsyn Nk Hjfx Ab Tehw

Year of construction: 2022, operating hours: 7,315 h, condition: used, machine/vehicle number: 100644, Max. grinding wheel diameter: approx. Ø 915 mm, max. workpiece diameter: approx. Ø 440 mm, max. workpiece weight: approx. 250 kg, max. grinding wheel speed: approx. 80 m/s, operating pressure: approx. 6 bar, control system, manufacturer: DANOBAT/SIEMENS/MARPOS, type: Sinumerik/P7, 1 automated workpiece removal station JOVI 1113B, year of manufacture: 2022, net weight: approx. 300 kg, 1 air filter unit IFS M 1600, year of manufacture: 2022, serial no.: 567663, net weight: approx. 85 kg, connected load: 380-460 V, 50/60 Hz, 0.7 kW, 1.5-2.1 A, 1 hydraulic unit REXROTH Depósito HE-16120, 1 coolant filtration unit MICRONFILTER Easy 250/KMT350, year of manufacture: 2022, serial no.: 0201, tank capacity: approx. 2,300 l, connected load: 400 V/50 Hz, 2.44 kW, 1 immersion cooler HASCH MCS-120ST-05AOP6R7S7UZ1-3405C, year of manufacture: 2022, serial no.: 1003220300954, net weight: approx. 206 kg, 1 magnetic separator MICRONFILTER KMT350, serial no.: 0211, 1 tool loading unit, DANOBAT rotary table lift, year of manufacture: 2022, serial no.: 3130490901, net weight: approx. 350 kg, max. payload: approx. 360 kg Iedpfjyn Nlwox Ab Tehw

Year of construction: 2021, operating hours: 5,475 h, condition: used, machine/vehicle number: 100000736, max. centre distance: 60 cm, max. grinding diameter: 44 cm, max. workpiece weight: 500 kg, control: SIEMENS Sinumerik/Balance Systems VM25, handling robot YASKAWA YR-1-06VXH12-A00, year of manufacture: 2022, serial number: 6V2272528290001, automation system/workpiece storage EGS Automation Danobat CG600-BL1, year of manufacture: 2023, serial number: 190605-6, 2-fold, filter 3FS M1600, no.: 565209, year of manufacture: 2021, weight: 85 kg, oil band filter MICROFILTER Easyband 150, serial number: 0202, year of manufacture: 2021, pump REXROTH HM-46, safety enclosure Iodpfx Aoyn Nk Tob Tjhw