Used Cnc Turning Machine for sale (67,099)

Condition: good (used), Year of construction: 2015, Ref. -No.: 10716 Crodpfx Ao Ahw R Ejktsi Manufacturer: DMG MORI Type: CTX alpha 500 Year of construction: 2015 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 004xxxxx Tool holder type: VDI 30 X stroke: 260 mm Z - stroke: 550 mm Bar passage: 65 mm Turning Diameter: 500 mm Turning Length: 520 mm Spindle Speeds: 5.000 RPM Spindle Bore: 76 mm Tool changer: 12 Pcs Operating hours: 38.500 Hours Weight Of The Machine Ca.: 4.8 t Further information: Including chip conveyor, transport securing equipment, documentation and accessories. The machine has been cleaned and can be inspected under power.

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, Crjdpjz Srv Dsfx Aktei 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Codpewuclxofx Akteri Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11

Year of construction: 2004, condition: ready for operation (used), A vertical EMAG CNC turning machine with automation is available. Speed: 6500rpm, workpiece length range: 22mm-100mm, turning length: 100mm, measuring length: 94mm, max. swing diameter: 220mm, max. pump pressure: 120bar, tool stations: 12, loading stations: 2, robot type: M-10iA, control: Fanuc 16i-TB, weight: approx. 10000kg, power-on hours: 84847h. Including high-pressure pump, tool setting probe, chip conveyor, coolant system, workpiece shuttle system and robot automation. Documentation available. An on-site inspection is possible. Crsdpfxezl Enbj Aktei

Year of construction: 2010, condition: ready for operation (used), A vertical CNC lathe Emag is available. Speed: 4500rpm, Tool stations: 12, Travel X/Z: 570mm/200mm, Max. chuck diameter: 260mm, Max. turning diameter: 260mm, Max. machining diameter: 220mm, Max. workpiece length: 110mm, Rapid traverse X: 60m/min, Rapid traverse Z: 30m/min, Feed force: 5.5kN, Max. workpiece weight: 120kg, Weight: approx. 6500kg, Control: Siemens Sinumerik 840. Documentation available. An on-site inspection is possible. Credpfx Aozl Em Dektji

Condition: good (used), Year of construction: 2006, operating hours: 1,716 h, functionality: fully functional, turning length: 1,500 mm, turning diameter: 420 mm, Equipment: documentation/manual, Used Mazak Quick Turn Nexus 350 M machine, standard configuration with a 15" Kitagawa three-jaw chuck and a center distance of 1500 mm, maximum turning diameter of 420 mm. Cjdpfx Akj Ahgkpotjri Power on: 4936 hours, operating hours: 1736 hours. No unusual noises detected. Maintained and serviced by Mazak in February 2026. The machine is in excellent condition and comes with a large number of tools.

Year of construction: 2018, condition: ready for operation (used), Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screws), motor spindles with release units (replace bearings/reseal), cross slides (guideways/ball screws/motor), workpiece spindle (replace bearings/reseal), protective enclosure (interior cladding/working area door/repaint machine), coolant pumps, replacement of electrical cables/lubrication and hydraulic lines, as required. An on-site inspection is possible. Credpfsztducox Aktei

Year of construction: 2007, condition: ready for operation (used), A vertical EMAG CNC turning machine is available. Turning diameter: 400mm, swing diameter: 420mm, X/Z-axis travel: 850mm/315mm, spindle bearing diameter: 140mm, spindle speed: 4000rpm, rapid traverse X/Z: 45m/min/30m/min, feed force: 11kN, machine dimensions X/Y/Z: approx. 9500mm/4500mm/3000mm, weight: approx. 9000kg. Including hard turning function, dry machining function and chip conveyor. Documentation available. An on-site inspection is possible. Cjdpfxeznmxtj Aktori

Year of construction: 2012, condition: ready for operation (used), Travel X/Y/Z: 2000mm/750mm/800mm, NC rotary table diameter: 950mm, milling head: SK50, milling head tilt: +/-90°, tool positions: 48, max. workpiece weight: 2500kg. Dimensions X/Y/Z: approx. 4000mm/3100mm/3200mm, weight: approx. 16000kg, control: Heidenhain 640. Including measuring probe M & H, 40bar IKZ, work area extraction Reven, paper belt filter Resy, brine conveyor, chip cleaning gun, wedge chuck Schink, diameter: 630mm, with various clamping jaws and other various turning and milling tools. Documentation available. On-site inspection is possible. Cjdpjt Ambwsfx Aktsri

Condition: good (used), Year of construction: 2002, functionality: fully functional, Control system: Traub TX 8i Main spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Counter spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Tooling system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front tool holder, 5-position, with Z3 slide, without drive Crsdpfx Asz Erdtsktei Rear machining station (5 tools), without drive Bar loader: IEMCA BOSS 432/44

Year of construction: 2002, condition: ready for operation (used), Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible. Crodpfx Aoubyy Nektoi

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Cjdpfx Aoq T I Izjktori Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Feed rates: Rapid traverse X-axis: 30 m/min Cedpew T Sn Esfx Akteri Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.

Condition: excellent (used), Year of construction: 2019, Sub-spindle, C-axis SIEMENS 840DSL Turning diameter max 16 mm Turning length 145mm Spindle speeds main & sub-spindle 15'000 rpm Tool holder group 1+2: 6 driven positions C-Axis 0.001° Misc. accessories Cjdpfsud Nhhox Aktsri MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: DW1408, spindle speed (max.): 6,000 rpm, bar passage: 42 mm, controller model: Fanuc 0i-TF, counter spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Number of axes: 7 Axis configuration: X1, X2, Y1, Z1, Z2, C1, C2 Number of Y axes: 1 Number of spindles: 2 Main spindle speed: max. 6,000 rpm Counter spindle speed: max. 5,000 rpm Bar capacity: max. 42 mm Number of tool turrets: 2 Speed of driven tools: max. 5,000 rpm MACHINE DETAILS CNC control: Fanuc 0i-TF Crsde Ahm Adspfx Aktji Type of input current: Three-phase EQUIPMENT 2 tool turrets Main and counter spindle 173E collet chuck on both spindles Y-axis High machine rigidity and precision Documentation/Manual

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Crsdpfx Akowym Nfjtoi Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Year of construction: 2004, condition: ready for operation (used), A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 42668h/42411h, Feed/Machining time 1/2: 29058h/27736h, Automatic operation hours 1/2: 10354h/12404h. Both machines are equipped with chip conveyors, 2 tool turrets, 2 loading stations, a workpiece palletizing system, robot automation and cooling. Documentation available. An on-site inspection is possible. Crsdszl Emkjpfx Aktei

Year of construction: 2004, condition: ready for operation (used), A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z-axis travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 51170h/53006h, Feed/Machining time 1/2: 33418h/30961h, Automatic operation hours 1/2: 14858h/14709h. Both machines are equipped with chip conveyors, 2x tool turrets, 2x loading stations, a workpiece palletizing system, robot automation and coolant system. Documentation available. An on-site inspection is possible. Cedpfx Akszl Emdjteri

Condition: used, machine/vehicle number: 008703, X axis working area: 3650 mm Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of drilling spindles: 37 Total number of tool changer positions: 18 Crodpfx Akszq Ur Tstsi

Condition: used, CNC Turning and Machining Cente: Codpozwn Sgsfx Aktjri Gildemeister/DMG Mori CTX2500/700 Year: 2019 Serial No.: 02620000651 2 driven spindles, rated speed 4,000/5,000 rpm, net weight 6,360 kg, accumulated operating hours 44,087 h, spindle hours: 27,832 h, cooling unit, chip conveyor, coolant treatment system, control system model: Ergoline, tool turret, 14 positions, for driven tools

Condition: good (used), Year of construction: 2004, CNC turning/milling center Codpfx Ako Ahynkotjri Manufacturer: MAZAK Machine model: Integrex 200 2S Control: Mazatrol 640 MT pro Year of manufacture: 2004 TECHNICAL DATA Swing diameter, max. (mm) 660 Turning diameter, max. (mm) 660 Max. turning diameter over slide (mm) 500 - 660 Bar machining up to Ø (mm) 64 Workpiece weight - Chuck workpiece (kg) 100 - Shaft workpiece (kg) 150 Travel distances - X-axis (mm) 580 - Z-axis (mm) 1,045 - Y-axis (mm) ± 80 - W-axis (mm) 1,050 - B-axis (degrees) -30 to +195 Rapid traverse rate (m/min) - X-axis (m/min) 38 - Y-axis (m/min) 26 - Z-axis (m/min) 38 - W-axis (m/min) 30 - C-axis (rpm) 400 Feed rate range - X / Z / Y-axis (mm/min) 0 – 8,000 Main spindle integrated spindle motor - Speed range (stepless) (rpm) 35 – 5,000 - Drive power (kW) 22 - Torque max. (Nm) 349 - Spindle nose A2 - 6 inches - Indexing (degrees) 0.0001 Second spindle - Speed range (rpm) 35 – 5,000 - Drive power (kW) 18.5 - Torque max. (Nm) 326 - Indexing (degrees) 0.0001 Driven tools - Speed range (rpm) 15 – 12,000 - Drive power (kW) 15 - Torque max. (Nm) 120 - Tool holder Capto C6 Tool magazine - Number of tool positions 40 - Tool weight max. (kg) 10 - Tool diameter max. (mm) 90 - with free secondary positions max. (mm) 125 - Tool length max. (mm) 300 - Tool change time (sec.) approx. 1.3 sec Connected load 62 kVA Operating voltage 400 V / 50 Hz EQUIPMENT FEATURES + Coolant tank capacity 220 liters + Chip conveyor, hinged belt design, discharge to the side + Automation alphaMAX ++ Industrial robot designation Motoman NX 100 ++ Number of axes 6 ++ Load capacity 20 kg ++ Positional repeatability ± 0.06 mm DIMENSIONS and WEIGHTS Machine weight (kg) approx. 10,200 Machine footprint (mm) 3,820 x 2,060 Subject to changes and errors in technical data and specifications.

Year of construction: 2003, condition: ready for operation (used), A vertical CNC lathe by Emag is available. Workpiece length range: 22mm-100mm, turning length: 100mm, speed: 6500rpm, measuring length: 94mm, max. swing diameter: 220mm, tool stations: 12, weight: approx. 7000kg. Including tool setting probe, carousel workpiece transfer system, chip conveyor and coolant system. Documentation available. An on-site inspection is possible. Codpfx Aozl Emqoktjri

Year of construction: 2004, condition: ready for operation (used), A total of three EMAG vertical turning machines are available. Chuck diameter: 200mm, max. swing diameter: 200mm, travel X/Z: 200mm/400mm, speed: 7500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 2450mm/1900mm/2300mm, weight: approx. 5500kg, control: Fanuc. Including extraction system and chip conveyor. Documentation available. An on-site inspection is possible. Crodjygmdbepfx Aktoi

Condition: excellent (used), Year of construction: 2024, 2024 Mazak Integrex J-200S 5-Axis Multi-Tasking CNC Lathe With Mazatrol Smooth G Control Main Spindle Hainbuch Ø215mm 3 Jaw Power Chuck, Sub Spindle Kitagawa B-208 3 Jaw Ø210mm Power Chuck. Maximum Swing Ø530mm. Maximum Swing Over Cross Slide Ø530mm. Maximum Machining Ø500mm. Maximum Bar Working Capacity Main Spindle Ø65mm, Sub Spindle Ø51mm. Maximum Machining Length 910mm. Maximum Support Weight Main Spindle Chuck Work 200kg, Maximum Support Weight Sub Spindle Chuck Work 200kg. Axis Travel 'X'=450mm, 'Z'=1,119mm, 'Y'=200mm, ,W,=1,436mm, 'B'=–30° To 210° (5° Increment'), C'=0.0001° Increment. Rapid Traverse 'X'=40m/min, 'Z'=40m/min, 'Y'=40m/min, 'W'=30m/min,C'=555rpm. Main Spindle Speed Range 35-5,000rpm (11kW Motor). Main Spindle Nose JIS A2-6”. Spindle Bore Ø76mm, Sub Spindle Speed Range 35-5,000rpm (11kW Motor). Main Spindle Nose JIS A2-5". Maximum Milling Spindle Speed 12,000rpm (7.5kW Motor). 72 Position ATC. Spindle Nose Capto C6. Turning Tool Shank 25mm², Boring Bar Ø40mm, Maximum Tool Ø125mm, Maximum Tool Length 210mm. Power Requirement 35.34kVA. Power On Hours 2,127. S/No.354479 (2024). NOTE: A loading fee will be added to buyer's invoice of £100 + VAT. Crodpe Ahg S Eefx Aktei With Through Coolant System, Cromar Chip Conveyor, Habor HBO-750PTSBM8 Oil Cooler, Habor HJ-400PSBM2 Oil Cooler, GTI GT 10L Slim Oil Mist Extractor, Parts Cathcher, Foot Switches, Signal Tower, Tooling Package (Consisting Of Kitagawa B-208 3 Jaw Ø210mm Power Chuck, Hainbuch Collets & Assorted Tooling) & Manuals (CD). Overall Machine Dimensions L3,790 x W2,420 x H2,500 mm. Weight 9,800kg.

Condition: used, BOEHRINGER / VDF NV 250 T is a CNC vertical turning machine designed for precision machining, high accuracy and reliability. Total axes 4; spindle hole 65 mm; travels Z 260 mm, X 760 mm, Y ±50 mm; rapid traverse X 120 m/min, Z 40 m/min; turret 12 positions VDI 40/DIN 69880. Spindle head A6; stepless up to 4500 t/min; spindle power 31 kW; voltage 50 Hz 3x 400 V; machine weight approx. 8500 kg. Equipment: 3-jaw chuck Ø250 mm with automatic centering, lamp, coolant system, oil mist extractor, automatic loading/unloading unit. Achieves tight tolerances; typical for automotive, aerospace, medical and machine tool sectors Crjds Adzhlopfx Aktoi