Used Vertical Turning Machine for sale (66,682)

Condition: ready for operation (used), chuck outer diameter: 2,257 mm, controller model: Bosch semi-automatic, empty load weight: 55,000 kg, Berthiez BM 225 sermi-automaat Variabele snelheidsregeling voor de klauwplaat Variabele snelheidsregeling voor de toevoer Maximale slag van de ram: 1000 mm Toren kan 45° en 30° kantelen Rsdpsyf Rubsfx Aglon Maximale werkstukdiameter: 4500 mm Maximale werkstukdiameter bij het draaien naar het midden: 4000 mm Maximale hoogte van het werkstuk: 2650 mm Maximaal gewicht van het werkstuk: 30 ton 69 kW op klauwplaat Machinegewicht: 40 ton Max turningdia -- passage: 4500 mm Power on the spindle: 69 kW Max longitudinal travel X-axis: 2450 mm Max hight of workpiece Z-axis: 2650 mm Number of speeds: 0,8 > 125 rpm

Condition: ready for operation (used), This machine is a three-station milling machine designed for the automatic machining, in a continuous cycle, of steam turbine blade roots. The three stations of this machine are defined as follows: - loading station with hidden time - roughing station (horizontal spindle) - finishing station (vertical spindle) A fixed, large cast-iron frame supports a circular plate onto which the machining fixtures will be mounted. The horizontal spindle moves, without overhang, on a rigid and fixed base. The feed of this spindle is controlled via a feed gearbox integrated with the base. The transverse feed of the vertical spindle involves movement of the upright on a fixed base. This movement is controlled by a feed gearbox located at the rear and integrated with the frame. The vertical feed of the vertical spindle involves movement of the spindle along the upright. This movement is controlled by the transverse feed gearbox located at the rear of the base. max workpiecedia: 4600 mm max workpieceheight: 900 mm Rsdeyfxwkepfx Aglsn with 2 heads: horizontal head: ISO 60 - speed: 4-63 rpm - transversal stroke: 820 mm - spindlepower: 44 kW vertical head: ISO 60 - speed: 4-63 rpm - transversal stroke: 500 mm - vertical stroke: 700 mm rotating table - dia: 3000 mm Weight: 40 TON compleet

Condition: used, Year of construction: 2001, turning diameter 220 mm Control Fanuc 18i x-travel 390 mm z-travel 435 mm tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 4.500 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the Rsdpfjwth Szex Agljn scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2003, turning diameter 220 mm Control GE Fanuc 18i-TB x-travel 400 mm z-travel 450 mm tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 6.000 U/min Number of working hours 10741 h work stroke 150 mm X-Achse EMAG VL5 vertical lathe, built in 2003, very good condition, ready for use, but currently not in operation. Accessories: Redpfx Agoyf N D Islsn Extraction system 9 tool holders, 4 of which are driven tools 1 pallet Various workpiece carriers

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm turning height 600 mm z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V Rjdov Rrq Dopfx Agljn frequency 50 Hz control Siemens 840 D pl total power requirement 140 A weight of the machine ca. 18 t dimensions of the machine ca. 6,5 x 3,8 x 4,20 m

Condition: ready for operation (used), chuck outer diameter: 1,250 mm, controller model: E.C.S CNC 1402, empty load weight: 17,000 kg, 5000 kg maximaal op tafel KM 50 gereedschappen Max turningdia -- passage: 1400 mm Power on the spindle: 60 kW Max longitudinal travel X-axis: 2700 mm Max hight of workpiece Z-axis: 750 mm Number of speeds: 2-430 rpm - max 450 Nm Rjdpexqh R Nefx Agljn Power needed: 3 x 380 V TOOLING: yes Turret: yes Qty Tools: 24 Coolant pump: yes Light: yes

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Machine No.: 2219, Control system: Siemens, Model Sinumerik 840D sl, 2 spindles, spindle distance 210 mm, max. speed approx. 4000 rpm, W-tool spindle / grinding spindle 2000 rpm, max. workpiece diameter 100 mm, max. workpiece height 40 mm, 8-position tool turret, manufacturer Sauter, model 0.5.480.516, tool holder type Capto C5, workpiece automation device, manufacturer DVS, model Moduline, transfer robot manufacturer Epson, PLC system control by Siemens, display with Simatic Panel Touch, coolant system by Knoll, type KF150/950, paper band filter, chip conveyor by Knoll, type 225S-2/170 Rsdpox Ahg Ujfx Aglen +++ Note: This machine is part of an online surplus sale! +++

Condition: ready for operation (used), Year of construction: 1993, swing diameter 1400 mm faceplate diameter 1500 mm Control Sinumerik 850T work height max. 1400 mm Tool changer 12 stck. workpiece weight 5 t YEAR OF CONSTRUCTION: 1993 Rjdpovxa Tpjfx Aglon Mechanical overhaul: 2010

Year of construction: 2004, condition: ready for operation (used), A total of three EMAG vertical turning machines are available. Chuck diameter: 200mm, max. swing diameter: 200mm, travel X/Z: 200mm/400mm, speed: 7500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 2450mm/1900mm/2300mm, weight: approx. 5500kg, control: Fanuc. Including extraction system and chip conveyor. Documentation available. An on-site inspection is possible. Rsdsygmdbspfx Aglen

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 23165, Used CNC vertical hard turning machine Manufacturer: FELSOMAT Model: FTC 180 Year of manufacture: 2011 Felsomat automation for 23165 Redsx Tbcajpfx Aglon

Condition: used, Year of construction: 2018, working diameter 140 mm turning diameter 185 mm workpiece length 120 mm control Siemens turning speeds 7.000 U/min Vertical Turning Machine | FAMAR - BISUB 160 2G The machine is in very good condition. Please note that the technical details were added from comparable machines. Redpfox Szmpex Aglsn - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: BISUB1602G | BISUB160 2G | BISUB-160 2G

Condition: used, Year of construction: 2003, Feed diameter 250 mm Workpiece diameter max. 140 mm Workpiece length max. 700 mm Rsdpfx Aoydfpkoglen Main spindle power (40% duty cycle) 38 kW Main spindle speed max. 4,000 rpm Rapid traverse speed X / Z 30 / 40 m/min Tool carrier 3 x disc turret with up to 11 driven tools each, or end machining turret

Condition: ready for operation (used), Swing diameter over bed/cross slide: 800mm/500mm, max. turning diameter: 590mm, max. turning length: 650mm, spindle power: 30kW, speed: 2500rpm, bore: 105mm, bearing: 160mm, travel X/Z: 300mm/670mm, rapid traverse X/Z: 12m/min/16m/min, tool positions: 8. Machine dimensions X/Y/Z: approx. 1850mm/2700mm/3100mm, weight: approx. 8500kg, control: Fanuc. The spindle controller constantly goes into overload and is therefore defective. Dokumentation vorhanden. An on-site inspection is possible. Redoxyk T Sspfx Aglon

Condition: used, Year of construction: 2001, Technical details: turning diameter: 300 mm swing diameter: 350 mm Redpfsvb Dq Djx Agljn turning height: 275 mm x-axis: 925 mm z-axis: 250 mm clamping chuck diameter: 200 mm Feed speed: 30 m/min. total power requirement: 45 kW weight of the machine ca.: 7 t Machine was used just from time to time in the last years - very good condition! with CNC SIEMENS 840 D 12-station turret head with driven toolings workpiece in and out conveyor belt coolantattachment and chip conveyor diverse accessories *

Condition: used, Year of construction: 2002, turning diameter 1000 mm swing diameter 1250 mm turning height 1000 mm Control Siemens 840D total power requirement 110 kW weight of the machine ca. 25 t Redpfx Agoxfwgpelon

Condition: used, Year of construction: 2014, swing diameter 210 mm turning length 210 mm weight of the machine ca. 13 t Feed diameter: 160 mm Workpiece diameter: max. 63 mm Workpiece length: max. 400 mm Workpiece weight: max. 10 kg Travel distances: X-axis: 340 mm Z-axis: 625 mm Main spindle power: 40%/100%, 34/26.5 kW Torque 40%/100%, 144/112 Nm Speed: max. 6000 rpm Turret tool positions 2 x 11 (1 gripper) Rapid traverse speed X/Z: 30/30 m/min Spindle size: KK5 Circular diameter: max. 210 mm Workpiece diameter: max. 63/100 mm Tailstock pin: MK3, 120 N/bar Stroke: 5 mm Operating voltage: 400V Control voltage DC: 24V Control voltage AC: 230V Frequency: 50 Hz Rsdoyan Riopfx Aglsn Electrical equipment: VDE 0113

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,437 h, Main Drive Number of axis 3 Spindle Speed 6000 RPM Spindle motor power 18.1 kW Movement X-Axis Movement 650 mm Z-Axis Movement 375 mm Y-Axis Movement 50 mm Rjdpfx Agsx S Skrjlen This 3-axis EMAG VL2 vertical turning machine was manufactured in 2017. It features a max workpiece diameter of 100 mm, chuck diameter of 160 mm, and a swing diameter of 210 mm. The main spindle offers a power rating up to 18.1 kW and a max spindle speed of 6,000 rpm. Consider the opportunity to buy this EMAG VL2 vertical turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), chuck outer diameter: 700 mm, total height: 3,415 mm, controller model: Siemens 840D Solution Line, empty load weight: 17,000 kg, Type: Ultrix 800 RT De Ultrix 800 RT is een multifunctioneel bewerkingscentrum met 5 geïnterpoleerde assen en een beweegbare portaalconstructie voor snel frezen, draaien, slijpen, boren, tappen, afwerken, ontbramen en voorbewerken van complexe onderdelen. Bij gebruik voor draaien verticale draaibank: - Draaibereik: 1100 mm - maximaal gewicht van het werkstuk: 700 kg - 40/30 kW op de tafel - Maximaal koppel op de tafel: 1500 Nm - Maximale snelheid van de tafel: 800 rpm!! - hydraulische klemming op tafel - gereedschapsconus voor draaien: KM63 - Gereedschapswisselaar met 150 posities, waarvan 24 voor draaien. Bij gebruik voor frezen, slijpen, boren, ... bewerkingscentrum: - X-as: 800 mm - Y-as: 900 mm - Z-as: 600 mm - A-as: -30° / 110° - C-as: continu - maximaal gewicht van het werkstuk: 700 kg - 55/40 kW op de spindel - maximaal koppel op de spindel: 18 / 16 Nm - maximaal 40.000 toeren per minuut - gereedschapsconus voor frezen: HSK-E40 - Gereedschapswisselaar met 150 posities en 126 gereedschapsposities voor frezen, slijpen en boren Lijst met opties die op de machine zijn gemonteerd: 1 - Hogesnelheidsspindel met 40.000 tpm 2 - tafeldiameter 700 mm met hydraulische klemming 3-150-positie gereedschapswisselaar 4 - spanentransportband 5 - koelsysteem met terugwinning 6 - regeling van de koelvloeistoftemperatuur 7 - hogedrukkoeling (40 tot 70 bar) deurspindel 8 - rookafzuigsysteem 9 - doos voor het verzamelen van chips 10 - Voorinstelsysteem en gereedschapsintegriteit: laser- en mechanische meetsonde voor meetinstrumenten 11 - Renishaw-sonde Max turningdia -- passage: 1100 mm Power on the spindle: 40/30 kW Long: 4655 mm Redpfoxtgkajx Agljn Wide: 5890 mm Turret: yes Qty Tools: 150 positions Coolant pump: yes

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Redpfx Aet Rmdzoglsn Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis *

Condition: used, Year of construction: 2006, Technical details: swing diameter: 200 mm weight of the machine ca.: 15 t Distance between tips: 832,5 mm turning length: 380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers * Rsdpequy Iuofx Aglon

Condition: used, Year of construction: 2006, Technical details: turning diameter: 250 mm swing diameter: 260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools! * Rodexc Idgepfx Aglsn

Condition: used, Year of construction: 2015, Technical details: Rsdpfx Agjq Sc Hujljn turning diameter: 200 mm swing diameter: 260 mm turning height: 60 mm

Condition: used, Year of construction: 2013, Technical details: turning diameter: 250 mm swing diameter: 250 mm turning height: 200 mm total power requirement: 37,7 kW chuck diameter: 315 mm spindle speed max.: 5500 1/min travel -x axis: 625 mm travel -y axis: +100/-80 mm travel -z axis: 250 mm worktool system: VDI 30+40 weight of the machine ca.: 8 t Rsdpfx Agovxuc Eslsn The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining. *

Condition: used, Year of construction: 2016, Technical details: Redexy I Exspfx Aglen total power requirement: 55 kW weight of the machine ca.: 13 t We offer you 21 x EMAG complete € 50.000 free loaded new EMAG is around € 500.000 *

Condition: used, Year of construction: 2002, Technical details: turning diameter: 200 mm turning height: 120 mm weight of the machine ca.: 18 t Available from 01.08.2024 Rodsr Dwpmopfx Aglsn *