Used Vertical Slotting Machine for sale (84,483)

Condition: used, Year of construction: 1954, Technical details: Hfedpov Ty R Djfx Ahyeb max. ram stroke: 220 mm workpiece diameter - max.: 400-450 mm total power requirement: 1,5 kW work table:: 650x250 mm ram adjustment: 100 Manuell mm no. of ram strokes: 45/78/125 table adjustment: 400 längs mm table adjustment: 150-170 quer mm table adjustment: ca. 360 vertikal mm tool - head swivelling: +/- 10 Grad total power requirement: 1,5 kW weight of the machine ca.: 0,9 t dimension machine xH: 1,2 x 0,9 x 1,8 m

Condition: used, Year of construction: 1970, max. ram stroke 250 mm throat 250 mm table diameter 350 mm Hjdoxu Nq Sspfx Ahyjfb long. travel of table 200 mm cross travel of table 500 mm distance table - lower edge of ram 300 mm double strokes/min. 15 - 160 /min total power requirement 1,7 kW weight of the machine ca. 1,7 t

Condition: excellent (used), Stroke: 320mm Table dimensions: 630mm Hfsdpfxox Tpz De Ahysb

Condition: good (used), Year of construction: 1990, machine/vehicle number: 06725, TECHNICAL SPECIFICATIONS 1AC 1 Adjustable tool travel from 0 to mm 200 2 Distance between column and tool holder mm 350 3 Distance between table and head mm 460 5 Ram vertical travel mm 370 6/7 Measurements table mm 280x500 8 Longitudinal travel ( NC controlled axis Y ) mm 230 9 Horizontal travel ( manual axis X ) mm 250 10 Through hole Ø mm 80 N. of variable stepless strokes N.stroke/min 30 to 120 Ram drive motor Kw 2,2 Overall machine dimensions mm L = 1220 Hfodpfstyyt Aox Ahyeb P = 1200 H = 2300 Weight Kg 1150

Condition: used, Vertical Slotting Machine GSP type MORT 730 3-jaws chuck Ø 250 mm Slide travel: 170 mm Throat heigth: 300 mm Throat depth: 450 mm Swivel head +/- 30° Axes: X auto / Y manual Table Ø 500 mm Table: Manual Rotation Feeds: from 0 to 1,2 mm/stroke Strokes/min.: 31, 50 or 79 strokes/min. Vernier Graduation: 1 division = 0,1 mm Hfjdpfx Ahox Ei Rcoyjb Voltage: 380 V Width: 1400 mm Depth: 2100 mm Total height: 2100 mm Weight: approx 1,5 T

Condition: used, Year of construction: 2001, dimensions of the machine ca. 1450 x 1560 x 2620 mm weight of the machine ca. 1,8 t The machine frame is a solid welded construction. The cooling oil tank is located in the machine bed. The cross table is made of cast iron, guideways are ground and scraped with adjustment strips. The shaper head is also made of cast iron, the guides are ground and scraped, with lubrication grooves. The push head can be swiveled +/- 20 degrees. Stroke adjustable through side opening. Tool is positioned at the longitudinal stop. The machine has a mechanical stroke drive. The control for the CNC dividing head is housed in the control panel. The zero point can be set in any position of the dividing head and with the division options of 2-999 symmetrically and 99 divisions asymmetrically. Machine color: Green Color dividing head: red --> Digital operating instructions available in German + English Hodewbi Awjpfx Ahysfb

Condition: used, Technical details: max. ram stroke: 250 mm workpiece diameter - max.: 80 mm max. workpiece length: max. 900 total power requirement: 1,5 kW Hfsdpew Au I Iofx Ahyeb weight of the machine ca.: 2,1 t

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Stroke size: max. 80 mm Hedewbi Rbepfx Ahysfb Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear

Condition: new, Year of construction: 2025, Brand new NC-controlled precision vertical slotting machine for efficient production of keyways. Menu-guided program control for slot depth, slot width, cutting depth, tool width, and number of finishing strokes. Optionally available with a rotary indexing table. Rotary table diameter Ø 320 mm – up to three CNC axes possible. Stroke range of the slotting ram: 0 to 200 mm. Table size: 280 x 500 mm. Clamping table bore: Ø 80 mm. Hfsdexdi D Dspfx Ahysb Throat depth: 350 mm. Maximum workpiece height: 400 mm. Continuously variable ram speeds: 30 to 120 mm/min. Dimensions approx. 1.2 x 1.2 m x height 2.3 m. Drive power: 2.2 kW. Weight approx. 2,200 kg.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Tool travel : 0-315 mm Strokes per minute : 14 - 60 Ram adjustment : 235 mm Swivel angle of head : ±45° Head to table distance : 510 mm Tool to column distance : 460 mm Diameter of rotating table : 450 mm Diameter of central hole of rotating table : 80 mm Number of fixed positions of rotating table : 24 Longitudinal travel of worktable : 265 mm Transverse travel of worktable : 200 mm Hjdpevfctfefx Ahyofb Self-breaking main motor : 4 kW / 5.5 h Weight : 1310 kg Overall dimensions : 1000 x 1500 x 2250 mm

Condition: good (used), max. ram stroke 230 mm Hfodpow Ny S Refx Ahyob throat 230 mm table diameter 0 mm are offered : 2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 1250 1x overhauled new 1x has to be overhauled. Year of manufacture: unknown

Year of construction: 1948, condition: used, Technical details: max. ram stroke: 450 mm table diameter: 800 mm min. ram stroke: 65 mm workpiece height max.: 600 mm ram adjustment: 600 mm no. of ram strokes: 18; 22; 28; 35; 45; 56 Hub/min. cross feed of the table: 800 mm longitudinal feed of the table: 1000 mm table rotation: 360 ° feed: Tisch: pro Hub: 0,14 - 0,22 - 0,35 - 0,56 - 0,9 -1,4 mm/Hub total power requirement: 7,8 kW Hfjdpfou Ng Tbox Ahyob weight of the machine ca.: 6,25 t dimension machine xH: 2,8 x 1,9 x 3,0 m other features: Ram: -the ram is adjustable in the projection of 900mm -throat of bed = 700mm Tool clamp by means of bracket clamp (dimensions 350 x 250mm) Accessories: 1piece 3-jaw chuck Ø 250mm *

Condition: good (used), Year of construction: 2000, max. ram stroke 2 - 300 mm groove width 2 - 32 mm power capacity 8 kW no. of strokes 2 - 300 Hub/min throat ca. 300 mm Max. installation height ca. 450 mm automatic feeds 0,01 - 0,15 mm work speed 0 - 30 m/min return speed 30 m/min weight of the machine ca. 2,2 t dimensions of the machine ca. 2,5 x 1,5 x 2,2 m Hfodpfx Ahsuayibsyjb The BALZAT keyway jointing machine is characterised by the following advantages: - Infinitely variable adjustment of the jointing speed with constant return, even during the work process - Simple clamping of the workpieces with standard clamping devices, without additional tool holders - Extreme dimensional accuracy thanks to self-centring, centrally arranged blade holders - Feed rate can be changed during the programme sequence - Machine base is also a container for cutting oil - all components are easily accessible and replaceable

Year of construction: 1948, condition: used, Technical details: Hfsdpfx Asu Ng Tnshyob max. ram stroke: 180 mm adjustment of stroke: 100 mm no. of ram strokes: 45 / 73 / 125 Hub/min distance table/ram: 400 mm work table:: 650 x 250 mm total power requirement: 2,0 kW voltage: 380 V dimension machine xH: 1,3 x 1,0 x 1,9 m VERTICAL BROACHING MACHINE for the machining of keyways on flanges and/or bushes table adjustment: lengthwise=420 mm manual / 400 mm automatic, crosswise=150mm; vertical=300mm mechan. Drive The stroke is adjusted on the crank disk by means of a threaded spindle. Inclined position of the ram guide with ram 10° Rotation of the drive disk per min. = 400 rpm. The machine does not comply with the legal safety requirements of the UVV (UVV = accident prevention regulations) . Sold as is, without test. *

Condition: used, Year of construction: 2012, Model Year: 2012 Width: 1,050 mm Length: 515 mm Height: 600 mm Number of Axes: 3 Hfedpfxsx Tudds Ahysb Holder: BT40 Spindle Speed (RPM): 8,000 Processable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: ready for operation (used), Year of construction: 2011, Feeler QMP-23A 5 Axis Vertical Machining Centre Model: QMP-23A Fanuc Series Oi-MD Control Remote Electronic Handwheels 5 Axis Trunnion Table Travels: X: 580mm (48m/min) Y: 420mm (48m/min) Z: 510mm (48m/min) Spindle Nose to Table Surface: 80 – 590mm Spindle Centre to Column Surface: 510mm Table Surface to Floor 820mm Table Centre to Column Surface: 245 – 665mm GANRO TR-150S (TRS Range) Y Axis Tilting Rotary Table 150mm Capacity YOM: 2015 *For sale with Jet Machinery Ltd* Stock No: 79001 Hfjdpjxxbzwsfx Ahysb Serial No: VKC064 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2014, condition: excellent (used), Gainsborough Vertical Form & Seal Bagging Machine Continuous VVF Bagging Machine Hedpfxjuct Ivs Ahyjfb Complete with Markem-Inage SmartDate X40 Coder In Excellent Condition Has had very little use

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Hjdpfx Ahjxni Iqoysfb Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type

Condition: new, functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: 1. Working Principle: - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. 3. Feedstock Control: - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. 4. Material Types: - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in. Hfodpfx Ahjq Nd U Heyeb

Condition: good (used), Year of construction: 2007, functionality: fully functional, Model Year: 2007 Hfjdpfx Asx Tt I Uohysb Width: 1100 mm Length: 410 mm Height: 640 mm Number of Axes: 3 Tool Holder: BT50 Spindle Speed (rpm): 6,100 Processable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: good (used), Year of construction: 2014, spindle speed (min.): 2,000 rpm, travel distance Z-axis: 500 mm, Year of manufacture: 2014 Hfsdpfx Aex Nwphjhyeb Chuck diameter: 15'' Number of axes: 3 Length: 500 mm Swing diameter: 450 mm Spindle speed (RPM): 2000 Machinable material types: Steel, aluminium, titanium, graphite, copper, Invar, composite, Delrin, Peek

Condition: used, machine/vehicle number: 008255, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4 Hfjdpox A Td Esfx Ahysb

Year of construction: 2016, condition: ready for operation (used), overall weight: 9,500 kg, General Data Machine weight 9500 kg This Engel Insert 90 was manufactured in 2016. A vertical injection moulding machine with a total run time of only 54 hours and a weight of 9,500 KG. Consider the opportunity to buy this Engel Insert 90 vertical injection moulding machine. Contact us for more information. Application Types Hfodpfjx D Hp Rjx Ahyob Injection Moulding

Condition: used, machine/vehicle number: 008258, X axis working area: 3500 mm Y axis working area: 920 mm Main Electrospindle power: 7 KW Number of controlled axes: 3 axes Total number of drilling spindles: 15 Total number of tool changer positions: 4 Hfsdpfx Asx A Hfcshyjb

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Hedpfowuclxox Ahyjfb