Cnc vertical milling machine buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5

Key-Way Milling Machine - Vertical BUSCH NF1 CNC

Mönchengladbach, GermanyGermany dealership location
6371 km
1987
used
groove width:16 mm x-travel:1000/1500 mm throat:200 mm y-travel:150 mm z-travel:150 mm spindle taper ISO:40 spindle motor:3 kW spindle turning speed range:300 - 3600 U/min quill stroke:150 mm diameter of quill:100 mm table surface area:1800 x 250 mm total power requirement:9,5 kW weight of the machine ca.:2,7 t dimensions of the machine ca.:3,5 x 2,7 x 2,5 m Fkytawfge CNC SIEMENS 810 M Indexing head with tailstock 4-fold toll changer table mounted more
2
The technical data, please refer to the attached data sheet. Other questions I'm gladly available. Lsdkt more
6
X trail-630 mm Y way 500 mm Z trail 500 mm Control Siemens 810 d Shopmill Maximum speed: 10,000 rpm Motor spindle SK40 before about 3000 h newly built a rapid traverse rate 30000 mm / min feed 10000 mm/min disc changer with 24 tools electric hand wheel IKZ 22 bar coolant tank approximately 700 L with belt filter system 49.700 operating hours 13500 spindle hours (total) Hdyy0ynhc 3000 spindle hours actually after overhaul scratch belt conveyor spray gun machine table 800 x 500 mm 5 gr... more
6
CNC vertical milling machine s type HM 450 CNC controller HEIDENHAIN TNC 145 Hzrsswrl Fabr. No. 82451194 built in ca. 1987 Routes x 1500 mm, Y: 630 mm, z: 630 mm Table size 2100 x 600 mm Distance spindle nose - table 600 mm Extension spindle Center - stand 640 mm Table load of Max 3000 kg ISO 50 spindle adaptor Spindle speed 60-1800 rpm in 12 steps Pinolvorschub speed 0.05 / 0.1 / 0.2 / 0.4 mm / Rev Spindle drive 22 kW Power supply 380 v, 50 Hz -Vertical head swivel +/-45° -Footsw... more
5
 Start Chat

CNC Vertical milling machine STROJTOS Lipník FGS 50 B

ČeskoCzech Republic
7010 km
good (used)
Control system: Heidenhain TNC 410 MA Clamping surface: 500 x 1250 mm Travel distances: X: 1000 mm Z: 500 mm Y: 630 mm. Spindle taper: ISO 50 Spindle speed.0-3000rpm Feed: X : 0-5000 mm / min 7cnkvjlkx Z: 0-5000 mm / min Y: 0-5000 mm / min Rapid traverse the x / z / y: 10000 mm/min Maximum- workpiece weight: 600 kg Engine power: 20 kW Machine weight: 4950 kg With a rotating head more
1

Milling Machine - Vertical HUVEMA HU S808 CNC

Bottrop-Grafenwald, GermanyGermany dealership location
6383 km
2018
used
x-travel 390 mm y-travel 210 mm z-travel 340 mm control Siemens S 808 D table-size 250 x 810 mm table load 80 kg distance spindle /table 50 - 390 mm 260 mm rapid motion -longitudinal/cross/vertical 10 m/min Ychttn0tv feeds longditudinal/cross/vertical 10 mm/min spindle turning speed range 8000 U/min spindle cone BT 30 total power requirement 2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. m more
5

Milling Machine - Vertical KLOPP-KORRADI UW 1 CNC

Niederlangen, GermanyGermany dealership location
6346 km
1987
used
x-travel:600 mm y-travel:350 mm 8qymzbexc z-travel:400 mm quill stroke:63 mm table clamping surface::900 x 450 mm table load capacity:400 kg no. of flutes:5 groove width:14 mm flute distance:80 mm spindle taper ISO:40 DIN 2079 spindle turning speed - stepless:20 - 4000 U/min feeds -stepless-:1 - 4000 mm/min rapid traverse:7 m/min total power requirement:12 kW weight of the machine ca.:2,2 t dimensions of the machine ca.:3 x 3 x 1,9 m more
6
Please refer to the data sheet for specifications. For any questions I'm gladly available. Bddwljy8q more
7

Vertical Milling Machine TOS F2V CNC

Králova 279/9, 61600 Brno, CZCzech Republic
7113 km
2011
good (used)
The milling machine is in very good technical condition. SIEMENS 802D control system Max. Workpiece weight 200 kg Table dimensions 254 x 1000 mm Working travels: X: 650 mm Balrdjtmzv Y: 390 mm Z: 400 mm more
4

Milling Machine - Vertical KONDIA K 600 CNC

Krefeld, GermanyGermany dealership location
6378 km
1995
used
x-travel 600 mm y-travel 350 mm z-travel 140 mm table surface area 700 x 300 mm spindle taper ISO 40 spindle turning speed range 100 - 4000 U/min distance spindle center to column 395 mm distance spindle nose and table min. 170 -max. 550 mm control TNC 407 milling feeds 3 + 2000 mm/min rapid traverse 5000 mm/min spindle drive 5,5 kW Qmedddu70 total power requirement 9 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407, more


cnc vertic...
daily

New machines via email!

Stay updated!
3

Milling Machine - Vertical HELLER PFV 1 CNC

Metzingen, GermanyGermany dealership location
6677 km
1992
used
x-travel 800 mm y-travel 560 mm z-travel 500 mm Cbqlhxjk total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
4
LONGITUDINAL TRAVEL: 1250 mm TRANSVERSAL TRAVEL: 400 mm Bcix2ic8se VERTICAL TRAVEL: 420 mm QUILL TRAVEL: 150 mm QUILL DIAMETER: 110 mm TABLE SIZE: 1550 x 450 mm MAX ADMITTED LOAD: 1000 Kg HEAD: ISO 50 ; 40-3000 rpm CONTROL UNIT: HEIDENHAIN TNC 135 WEIGHT: 3500 Kg NOTE: MANDRINO ORIZZONTALE 1900 rpm PRICE: On demand more
6
CNC control Heidenhain TNC 310 electronical hand wheel coolant device Technische Daten: /technical details X Weg/ x travel 1500 mm Y Weg/ y travel 450 mm Z Weg / z travel 400 mm Drehzahlbereich / spindle speed range 50-5000 UpM / rpm Vorschub / infeed 10-4000 mm/min Eilgang X, Y, Z / rapid feed x, y, z 12, 12, 9 m/min. Spindelaufnahme / spindle taper SK 40 Tischgroesse / table dimensions 1800x500 mm Antriebsleistung Spindel / drive capacity spindle 9 kW Gewicht der Maschine ca. / weight 4000 k... more
3

CNC Vertical Milling Machine BEAVER V 5

Sundern - Amecke, GermanyGermany dealership location
6459 km
1986
used
Workspace in x: 800 mm Workspace in Y: 400 mm Workspace in Z: 425 mm + 200 mm (CNC Quill) Table size: 1250 x 250 mm Speed range: 50-4000 RPM Spindle taper: ISO 40 F8uedfbiu Total power: 7.5 KW / 380 Volt Machine weight: approx. 2500 kg Accessories / equipment: CNC railway control HEIDENHAIN TNC 155 Hydr. Tool clamping Coolant system Feeds + rapid traverse in all 3 axes Chip protection tray more
8
Control system: PROTO TRAK SMX Travels X axis: 780 mm Y axis: 505 mm Z axis: 500 mm Table length: 1372 mm Table width: 355 mm Max. table load: 200 HP Max. spindle speeds: 5000 rpm Feeds: Clmjzloo Drive - DC brush. Max. torque - 9.5 Nm all axes. Rapid traverse: 6.3. Feed rate: 6,3. Machine dimensions: 2010 x 2320 x 2190 mm Machine weight 2300 kg more
3

CNC vertical milling machine Beaver V5

Muehlheim/Main, GermanyGermany dealership location
6573 km
1986
used
Control: HEIDENHAIN TNC 155, Table: 1250 x 250 mm. Paths: x = 800 mm, y = 400 mm, z = 200 mm (CNC Quill) plus 425 mm cantilever way,. Speed: 50-4000 rpm,. Hhgqe27z Spindle retainer: ISO 40, Drive: 7,5 KW, Weight: 2,500 kg more
1

Vertical CNC milling machine TongTai TMV-510All

Hornberg-Niederwasser, GermanyGermany dealership location
6626 km
2014
as good as new (ex-display)
Table table size 600 x 400 mm maximum capacity 250 kg Spindle spindle speed 20,000 rpm. Traverse paths x 510 mm Xzlds9ejb Y-axis 400 mm Z axis 350 mm Spindle nose - table surface 200-550 mm Rapid traverse x axis 48 m / min Y-axis 48 m / min Z-axis 48 m / min Tool tool holder MAS BT30 tool stations 20 units Max tool diameter 68 mm maximum tool length 200 mm maximum tool weight 3 kg Tool change time 0.8 sec Machine dimensions length x width 1.600 x 2,065 mm 2,485 mm... more
4
LONGITUDINAL TRAVEL: 3000 mm TRANSVERSAL TRAVEL: 1100 mm T33nyzwb VERTICAL TRAVEL: 1200 mm RAM TRAVEL: 900 mm TABLE SIZE: 3500 x 900 mm HEAD: ISO 50 - DIN ; 3000 rpm TOOL MAGAZINE: 10 POS CONTROL UNIT: SELCA S3045D PRICE: On demand more
3

CNC Vertical Milling Machine OERLIKON FB 2-V

Heilbronn, GermanyGermany dealership location
6641 km
1990
used
see word sheet 7j9hjh more
5
Vertical milling head in Exchange Bv22umhy Suitable for milling machine m 800 C, 1200 Toolholder SK 40 We are a company that has experience with machine tools for years. Specialized in cover, Maho, microns, Hermle. If necessary, we can assist you in troubleshooting and repair other electronic components and mechanical parts or deliver in Exchange, if available in stock. Under exclusion of any warranty and guarantee An error was made when the setting information we reserve the righ... more
1
HAAS CNC milling machine, Model VF-2 Control Haas (FANUC) Control table 914mm x 400mm Thvxvunec work 762mm X-Y-Z-406mm 508mm BT-40, 7500rpm, 20ATC, chip conveyor, more
5

Milling Machine - Vertical UNITECH FSS 400

Monheim, GermanyGermany dealership location
6403 km
2004
used
x-travel 1.120 mm y-travel 345 mm Nbrar z-travel 400 mm Control Heidenhain TNC124 workpiece weight max. 1.500 kg surface area 400 x 1.600 mm milling-spindle dia. in forward position 100 mm tool diameter max. 315 mm max. torque 1.850 Nm turning speed range 18 steps (step 1,25) turning speed range 28 - 2.240 U/min axial adjustment sleeve 90 mm swivelling range +/- 45 ° feed stepless rapid traverse y/x/z axis 3.150 / 3.150 / 1.000 creep feed (x/y/z) 50 / 50 / 16 mm/min. weight of the machin... more
6

Milling Machine - Vertical HERMLE U630T

More Hermle U 630
Wilbertoord, NetherlandsNetherlands dealership location
6307 km
2000
used
x-travel 630 (875) mm Bbv2k2sgbx y-travel 500 mm z-travel 500 mm control Heidenhain TNC 410 weight of the machine ca. 4.8 t more
6
Control: HEIDENHAIN TNC 320 Procedures: X away the 750 mm Y away 400 mm Z away 500 mm Bcs3kmihs3 Table 320 x 1270 mm Speed 3800 RPM more
6
max. workpiece diameter 440 mm threading length 4000 mm max. module 12 min. module 0,5 max. wheel diameter 440 mm gear width 4000 mm no. of teeth to be hobbed 3 - 300 mm max. swing diameter 600 mm Slide cross Axial = 4000 mm dist. cutter spindle - workpiece spindle 50 / 316 mm diameter of hob 192 x 220 mm head swivability +/- 45 ° taper Morse 5 shifting 200 mm milling drive motor 22 kW hob turning speeds 80 - 340 U/min electrics - voltage/frequency 400 / 50 V/Hz control Sinumerik 840 D tot... more
3
x-travel:1230 mm y-travel:355 mm z-travel:440 mm total power requirement:12 kW table-size:1600 x 400 mm tool taper:SK 50 Xobmxvax speeds:28 - 1400 U/min feed - longitudinal/cross:16 - 2500 mm/min feeds Z-axis:12,5 - 1000 mm/min weight of the machine ca.:4,2 t dimensions of the machine ca.:1,9 x 4,0 x 2,2 m more
6
CNC universal milling & drilling machine lid MAHO DMU 60t LID MAHO DMU 60T With contouring MILL PLUS iT Year of construction: 2003 Traverse paths: X 630 Y 560 Z 560 Speed range: 0 - 12,000 rpm continuously (SK 40) With the following accessories: Solid angle table 1000 mm x 600 mm clamping surface NC - rotary table 600 mm into rigid table 0 Controlled swivel milling head (B-axis) Measuring probe preparation (read head available) Electronic Handwheel Hjoygxyzw Mode 3 + 4 Vertic... more
1
Tool room milling machine in geometric mint condition! COVER type FP 2 A NC built in 1987 control type CNC dialogue 4 Cntjf097 Technical data x way 300 mm y-way 300 mm z-way 400 mm table size 620 x 390 mm control dialog 4 recording SK 40 speed range 40-3500 Rev/min rapid traverse speed 4 m / min feed rate 2 - 3600 mm/min power 2 kW Quill stroke 80 mm machine weight approx. 1.4 t dimensions L x. W x H machine in very good condition under current visit 2,00 x 2,00 x 1,90 m. No guarantee of... more
14
X/Y/Z 420/240/450 mm Control HEIDENHAIN TNC 355 Speed 50-9000 RPM Feed 1-5500 mm/min Rapid feed 7200 mm/min Table surface 730x280 mm Stroke quill 120 mm Gouitsf Taper in spindle FEHLMANN SF 32 Dimension (WxDxH) 187x140x200 cm Weight 1400 kg Accessories: A lot of accessories including 1 set of manuals with electric handwheel mit elektrischem Handrad more
6
1 used CNC - universal Milling Machine Manufacturer DMG Model DMU 80 YOM 1997 with CNC - control HEIDENHAIN TNC 426, universal table, electr. hand wheel and coolant Travels : X - axis = 800 mm Y - Axis = 650 mm Z - axis = 550 mm Gvn0z0 Taper in spindle = 40 ISO Speeds = 30 - 6300 rpm Spindle power = 11,5 / 17 kW Weight approx. = 6 ton more
6

Milling Machine - Vertical WERNER, FRITZ 231

Göppingen, GermanyGermany dealership location
6699 km
1965
used
x-travel unbek mm y-travel unbek mm z-travel unbek mm total power requirement kW weight of the machine ca. t Dhhvddwn dimensions of the machine ca. m more
5

Flat grinding machine - vertical ELB BD 15 x 2VSP CNC

Köln, GermanyGermany dealership location
6422 km
2003
unexamined (used)
Grinding length 1500 mm Grinding width 550 mm Workpiece height mm Control Siemens 840 D Size 1900 x 550 mm Table stroke 1500 mm Table UK spindle distance 500 mm Cross travel 580 mm Cross delivery 0.002 0.06 mm Grinding spindle drive 0.5-5 kW Y99ukb3 Grinding spindle speed of continuously 4200 - 42000 RPM Spindle diameter 120-85 mm Grinding spindle drive 0.8-8 kW Grinding spindle speed continuously 2100-21000 RPM Spindle diameter 120-100 mm Total power 25 kW Machine weight approx... more
9
C-Axis, driven tools Y-Axis Control: FANUC 21i-TB -Swing over bed 560mm -Turning Diameter 350mm -Turning length 1100mm -Spindle speeds 35-3500 rpm -turret: 12 positions, (12 x driven ) C79wld2 Misc.accessories MARCELS MASCHINEN CH more
1
Milling machine Correa A bench fixed Model 25/25 Year 1990 0piy0mp9 Races (mm) X 3000 Y1000 Z1200 Size of table (mm) 3000 x 1000 Design load (T) 7 Cone of spindle (Iso) 50 Speed of spindle (Rpm) 2-3000 Speeds ahead (mm/min) 2-5000 Feeding speed (m/min) X 10 YZ8 speed Main motor power (Kw) 30 Machine: CNC NUm manual universal head / gripping hydr. the tool more
9
X/Y/Z 420/240/450 mm Control HEIDENHAIN TNC 155 Speed 50-9000 RPM Feed 1-5500 mm/min Rapid feed 7200 mm/min Table surface 730x280 mm Stroke quill 120 mm Taper in spindle FEHLMANN SF 32 Dimension (WxDxH) 200x140x195 cm Weight machine 1150 kg Weight control cabinet 150 kg Power 8.5 kW Operating voltage 3x380V / 50Hz Bore capacity till 30 mm Accessories: X8h82vrd available 1 set of manuals in German more
6
max. wheel diameter 3000 mm gear width 1200 mm max. module 30 / 36 min. module 2 table diameter 2500 mm hob dia. - max. 450 x 500 mm milling spindle speeds 10 - 165 U/min hob length max. 500 mm min. number of teeth 20 tip circle diameter 2050 mm tooth helical angle min/max 0 - 45 ° center distance betw. workpiece-tool min/max. 150 - 1750 mm milling slide swivelling 50 Grad distance table / counter stay 1050 - 2050 mm shifting 300 mm workpiece weight 40 t table bore diameter 800 mm depth of ho... more
6

Milling Machine - Vertical KLOPP FWSU 1300

Göppingen, GermanyGermany dealership location
6699 km
1962
used
x-travel unbek mm y-travel unbek mm z-travel unbek mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Gugmao more
4
X: 800 mm Y: 400 mm Z: 350 mm Tool holder: HSK 63 Distance spindle - table: 265 mm / max 615 mm Forward speed: 10 m / min Speed range: 36-12000 RPM Tool changer: 78-fold Max tool diameter: 125 mm Maximum tool length: 250 mm 27x7fwd7 Control: Siemens Sinumerik 840 D Chip conveyor Paper band filter Coolant system Total: 36.5 kW Machine weight: 7000 kg Dimensions (W x D x H): 5.2 x 5.6 x 3.3 m Condition: good, ready for operation Accessories: Blum Laserstystem tool settin... more
6

Milling Machine - Vertical LAGUN MC 1000

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1998
used
x-travel 1000 mm Bcoqz90soy y-travel 500 mm z-travel 510/111.5 mm control Heidenhain TNC 410 weight of the machine ca. 6,3 t dimensions of the machine ca. 2240x2930x2750 mm more
5
Milling machine from a training workshop, for 12 years, no longer in use Manufacturer Kunzmann Type VF6-3 Built in 1978 Chuck SK40 continuous feed via potentiometer adjustable. Automatic feed in three axes X = 400 mm Y = 200 mm Jtk8pu Z = 400 mm Speeds of 35-1500U/min Weight 1350kg more
10

CNC universal milling machine MIKRON WF21D

More Mikron Wf 21
Oetwil am See, SwitzerlandSwitzerland dealership location
6705 km
1988
excellent (used)
X/Y/Z 450/400/400 mm Hpm0hp2 Control HEIDENHAIN TNC 355 Speed 4000 RPM Feed 1 - 3000 mm/min Rapid feed 4000 / 6000 mm/min Taper in spindle ISO 40 Dimension approx. 190 x 180 x 210 cm Weight approx. 2200 kg Accessories: Several accessories available 1 set of manuals more
4

Milling Machine - Vertical SNK FSP-120V

Göppingen, GermanyGermany dealership location
6699 km
1996
used
x-travel 3150 mm 2qodcy y-travel 1220 mm z-travel 736 mm total power requirement kW weight of the machine ca. 44 t dimensions of the machine ca. m more
3
5-axis, with NC swivel rotary table Travel range: X = 500 mm x Y = 450 mm x Z = 400 mm Rapid traverse speed: -X-axis = 80m / min -Y-axis = 50m / min Z-axis = 50m / min Sgongks Maximum feed force: X-axis 5kN, y = 5 kN, Z axis = 5 kN Feed drive: -X axis linear motor = -Y - and Z-axis digitally controlled AC = engines (ballscrew) Guided tours: circular roller in all linear axes Linear displacement measuring systems: direct, fotoelektrisch, resolution 0.0001 mm Positioning uncertainty... more
5

Milling Machine - Vertical CINCINNATI-MILACRON Sabre 1000

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1995
used
x-travel 1000 mm y-travel 500 mm z-travel 500 mm Control Heidenhain number of tools 21 Bcq8aj33fz weight of the machine ca. 6 t more
3
turning diameter 700 mm swing diameter 900 mm turning height 800 mm control SIN840D spindle turning speed - stepless 0 - 1000 U/min max. torque on the spindle max. 9167 Nm Qma0pw8g2 cross adjustment X: 600 mm feed stepless 0 - 6000 U/min rapid traverse 13,00 m/min total power requirement 115,00 kW weight of the machine ca. 40,00 t dimensions of the machine ca. 7,50 x 5,50 x H4,90 m Machine is dismanteled and can not be inspected under power. more
10

CNC universal milling machine MIKRON UME 560

More Mikron Ume 560
Oetwil am See, SwitzerlandSwitzerland dealership location
6705 km
1994
good (used)
X/Y/Z 560/500/400 mm Control HEIDENHAIN TNC 360 Feed X- & Y-axes 1-10'000 mm/min Feed Z-axe 1-8'000 mm/min Rapid feed X- & Y-axes 10'000 mm/min Rapid feed Z-axe 8'000 mm/min Table surface 900x530 mm Spindle speed till 5'000 RPM Tool holder ISO 40 Stroke quill vertical 90 mm Switch-on hours 20'760 h Dimension (WxDxH) 265x268x192 cm Weigh 3'000 kg Accessories: Several milling arbor 72xqagmvg 1 pc. electronic hand wheel 1 pc. coolant equipment 1 set of manuals more
15
Subspindle Milling head 2bq309nh Y + C axis Max turning diameter 500mm Distance between spindles 1308mm Turning length 1000mm Main spindle speeds 38-3800 rpm Subspindle speeds 45-6000 rpm Milling head 2x BT40 / Spindle speeds 100-6000 rpm Tool changer 40 Pos Control OKUMA OSP-7000L ( One Touch) Bar loader LNS Misc accessories MARCELS MASCHINEN CH more
6
spindle taper 2 x 40 ISA forward bearing diameter 110 mm milling head speed 100 - 4500 U/min milling drive 5,1 kW workpiece length - max. 830 mm taper diameter 78 g6 mm centre height 260 mm turning speed range - stepless max. 15 U/min distance of spindles 135 mm spindle nose DIN 55026 Gr. 5 stroke of workpiece slide 810 mm Feed speed max. 6 m/min. surface area 200 x 1750 mm tool post (Z-axis) stroke of tool slide 120 mm Feed speed max. 2 m/min. column movement 200 mm Uqwceibpq ta... more
8
Technical data: Spindle: Speed: 20.000 rpm, 16 KW, HSK-A63 with spindle coolant Control: HEIDENHAIN iTNC 530 2-axes rotating- and swivel table Pallet changer: 6 pallets EROWA 30fach tool magazine Procedures: -X: 600mm -Y: 450mm -Z: 450 mm -A:-115 / + 30 ° -B: indexing 0.001 ° incl. • Band filter unit internal cooling • Oil mist extraction • Chip conveyor Hgppn2hca • 3D-sensor • Tool measurement Weight: approx. 8.000 kg The machine can be visited with us at the site u... more


cnc vertic...
daily

New machines via email!

Stay updated!

to

to

Edit search
CNC VERTICAL MILLING MACHINE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close