Hermle for sale
Identified location: Ashburn (US) (Edit)
|
2
Warstein, Germany
6472 km
ready for operation (used)
from the dismantling of a Hermle UWF 851:Power board HEIDENHAIN Type: PL 100 B Id.Nr. 223 836 05Condition: used / usedThis offer is directed to commercial persons.prices quoted are net.we would be pleased to prepare a personal offer for you.please send us your complete contact details.offer subject to confirmation, subject to prior sale.internal no.: 1297
Bfwcygsa8q more
|
|
4
|
|
4
For sale is a used Hermle this has currently still electrical defects but these will be reperiert until sale.x-way 400 mmy-way 290 mmz-way 380 mmtable size 700 x 285 mmcontrol Heidenhain TNC 135Reception ISO 40 Speed range 40- 2.000 rpm rapid traverse speed 1.5 m/min feed speed 1500 mm/mindrive power 2.2 kW quill stroke 63 mmdimensions L x W x H 2.4 x 2.6 x 1.7 mweight 1.3 tttotal power requirement kWmachine weight approx. 1.5 tspace requirement approx. 1.8 x 1.8 x 1.8 m
Npgol more
|
|
6
Manufacturer article no.: 000.606.269
Machining: milling / drilling
Cone: HSK 63 A
UPM: 18000
Rotary feedthrough: no
Lubrication: Grease
Internal cooling: no
All information, offers and prices on this page are subject to change and non-binding.
E28ywkd more
|
|
6
|
|
8
Huttenheim, Germany
6583 km
1983
good (used)
X: 500
Y: 360
Z: 400
Recording: SK40
Inclination of the spindle nose 360°
Angle table clamping surface: 270 mm x 530 mm
Control: Siemens
Weight: ca. 2t
Belkrj8ldr
Space required: 2, 5 m x 2, 9 m
Available: immediately
Machine was converted in 1999 to Simens 840 C
Including tools, sump, documentation In the annex as an image, you will find the machine card more
|
|
3
Warstein, Germany
6472 km
ready for operation (used)
from the dismantling of a Hermle UWF 851:SIEMENS converter / compact unit type: D380/35 6RA2620-6DV55-0Condition: used / usedThis offer is directed at commercial persons.prices quoted are net.we would be pleased to prepare a personal offer for you.please send us your complete contact details.offer subject to confirmation, subject to prior sale.internal no.: 1296
Bfwcx7a2kp more
|
|
3
Machining: milling / drilling
Cone: HSK 40A
UPM: 40000
N20nikqh
Rotary feedthrough: no
Lubrication: Oil/air
Internal cooling: no
All information, offers and prices on this page are subject to change and non-binding. more
|
|
4
Warstein, Germany
6472 km
ready for operation (used)
from the dismantling of a Hermle UWF 851:SIEMENS converter / compact unit type: D380/30 6RA2718-6DV55-0Condition: used / usedThis offer is directed at commercial persons.prices quoted are net.we would be pleased to prepare a personal offer for you.please send us your complete contact details.offer subject to confirmation, subject to prior sale.internal no.: 1295
Bfwcxtpvwo more
|
|
4
Manufacturer article no.: 174774
Machining: milling / drilling
Cone: SK 40
UPM: 16000
Rotary feedthrough: no
Lubrication: Grease
Internal cooling: Yes
Ms8cv
All information, offers and prices on this page are subject to change and non-binding. more
|
|
|
|
7
Warstein, Germany
6472 km
ready for operation (used)
HEIDENHAIN logic unit Type: LE 355 B Id.Nr. 237 660 99incl..: Control loop card 238 289 01 and computer 237 930 01Condition: used / usedThis offer is aimed at commercial persons.prices are net.we would be happy to create a personal offer for you.please send us your complete contact details.offer subject to confirmation, subject to prior sale.internal no.: 1294
Bfwcxj8qcn more
|
|
6
Warstein, Germany
6472 km
ready for operation (used)
from the dismantling of a Hermle UWF1000:
Spindle motor / side loop. Engine
Manufacturer: Siemens
Type: 1 GL5114-0FY40-6HU7-Z
incl.: 2CW6 145-8 blower
Condition: used / used
This offer is aimed at professionals.
Munhf0
Prices quoted are net.
We are happy to prepare a personal offer for you.
To do so, please send us your full contact details.
Offer subject to change, intermediate sale reserved.
Internal No.: 1277 more
|
|
2
Warstein, Germany
6472 km
ready for operation (used)
from the dismantling of a Hermle UWF1000:
Permanent Magnet Motor
Manufacturer: Siemens
Type: 1 HU3076-0AC01-0ZZ9-Z
Condition: used / used
This offer is aimed at professionals.
Prices quoted are net.
We are happy to prepare a personal offer for you.
Be7bnwa0vw
To do so, please send us your full contact details.
Offer subject to change, intermediate sale reserved.
Internal No.: 1275 more
|
|
6
control Heidenhain 530i
x-travel 600 mm
y-travel 450 mm
z-travel 450 mm
Weight 6000 kg
tool adaptor SK 40
Ru3xa72p
13394 h
drive hours 39604 h
Number of working hours 53000 h more
|
|
14
Beckingen, Germany
6459 km
1995
good (used)
Vertical CNC machining centreManufacturer HermleType UWF 902HBuilt in 1995Control Heidenhain TNC42617.910 Operating hours4.283 Spindle hoursClamping surface 900 x 450mmTraverse X/Y/Z 600/450/500mmRange of speed 20 - 6.300U/minTool holder SK40Direct measuring systemHeidenhain 3 D stylusElectronic handwheel machine is in a good used condition, it was only used for the production of single parts.Immediately available34 Tool changer compartment
Glvqpht more
|
|
3
total power requirement 30 kW
x-travel 800 mm
Gcxkc2f
y-travel 600 mm
z-travel 500 mm
table - swivable +/- -20 / +90 °
table rotating 360 X 0,001 °
surface area 540 X 540 ( 630 ) mm
spindle turning speed - stepless 20 - 8000 U/min
spindle taper ISO 40
spindle diameter in front bearing 70 mm
feed range 1 - 30000 mm/min
control Heidenhain TNC 430
weight of the machine ca. 7,3 t
dimensions of the machine ca. 2,3 x 2,7 x 2,9 m
Heidenhain TNC 430 control for 5 axis
Pic up tool changer for 30 too... more
|
|
travel -x axis 800 mm
travel -y axis 600 mm
travel -z axis 500 mm
Control Heidenhain - ITNC 530
tool holder HSK63
tool magazin: 30
turning speed range - spindle 15.000 U/min
Noy3j
weight 8.500 kg
5-axis vertical machining center
equipped with ITC & chip conveyor. more
|
|
6
Ubstadt-Weiher, Germany
6595 km
excellent (used)
Universal milling machine Hermle UWF 802 M with HS 401 control Super condition!
Technical data:
ᐳᐳ built around 1995 machines-Nr. 10254
ᐳᐳ solid angle table of ᐳᐳ speed: 17-3550 RPM
ᐳᐳ feed continuously in 3 axes from 0 to 1600 mm / min ᐳᐳ power.: 6 KW ᐳᐳ traverse path X/Y/Z: 500/430/400 mm ᐳᐳ vertical spindle and horizontal Quill - SK40
ᐳᐳ hydraulic tightening system ᐳᐳ weight approx. 1800 kg
ᐳᐳ extent length 1.8 m, width 1.8 m, height 1.9 m
Bdnwlsa8n9
Accessories and equipment:
ᐳᐳ HS 401... more
|
|
6
Ellwangen, Germany
6710 km
2003
good (used)
CNC Bearbeitungszentrum / CNC Millingmachine 190102-113
Hersteller / Manufacturer Hermle
Typ: C800 V
Baujahr / year of manufactoring: 2003
Steuerung / control: Heidenhain iTNC 530
x-Weg / x travel: 800
y-Weg / y travel: 600
z-Weg / z-travel: 500
Spindel / spindle: SK 40 DIN 69871A
Drehzahl / rotation: 16.000 rpm
Bgp8y2ndi3
Werkzeugwechsler / tool changer: 30x
Tisch / Table: 1000x800 mm
Max. Tischbelastung / max. table movement 750 kg
Raumbedarf / ground space: 2.800x2.400x2500mm
Gewicht /... more
|
|
5
Großhansdorf, Germany
dealership location
6490 km
1997
used
control Heidenhain TNC 430
x-travel 800 mm
y-travel 500 mm
z-travel 500 mm
surface area 800x500 mm
Number of working hours 42335 h
spindle hours 19630 h
weight of the machine ca. 8 t
dimensions of the machine ca. L 5 x B 3,5 x H 2,95 m
*** CHRISTMAS ACTION - Price valid until 20.12.2019 ***
The machine is in good condition.
The scope of supply includes an oil mist suction, a chip conveyor a 4th B-axis
and a replacement pump KKS included.
Bekcbguxxu
A tour of the machine under power is possi... more
|
|
2
x-travel 800 mm
y-travel 500 mm
Sdqtw8ur
z-travel 500 mm
control Heidenhain
total power requirement - kW
weight of the machine ca. 7,0 t
dimensions of the machine ca. - m more
|
|
3
total power requirement 30 kW
x-travel 800 mm
y-travel 600 mm
z-travel 500 mm
table - swivable +/- -20 / +90 °
table rotating 360 X 0,001 °
surface area 540 X 540 ( 630 ) mm
spindle turning speed - stepless 20 - 8000 U/min
spindle taper ISO 40
spindle diameter in front bearing 70 mm
feed range 1 - 30000 mm/min
control Heidenhain TNC 430
weight of the machine ca. 7,3 t
dimensions of the machine ca. 2,3 x 2,7 x 2,9 m
Heidenhain TNC 430 control for 5 axis
Ptxohe
Pic up tool changer for 30 tool... more
|
|
x-travel: 600 mm
y-travel: 400 mm
z-travel: 420 mm
spindle taper ISO: SK 40
control: Heidenhain TNC 360
quill stroke vertical: 75 mm
turning speed range: 20 ... 4000 U/min
spindle head swivable left - right: 90° links / rechts °
feed:: X/Y/Z: [...] mm/min.
feed:: X/Y: 7 m/min. + Z: 6 m/min.
Table dimensions: 900 x 460 mm
table swivelabel +/-:
table load capacity: 400 kg
weight approx.: 2300 kg
dimension machine [...]: 4,0 x 3,8 x 2,0 m
total power requirement: 13 kW
Equipment:
Ccsuiyx
- separat... more
|
|
5
x-travel:740 mm
y-travel:500 mm
z-travel:500 mm
x-travel without toolchanger:915 mm
b-axis:-5 / +95 °
c-axis:360 °
rotary table dia.:630 mm
tool change unit:28 Pos.
number of spindle speeds:12000 1/min
tool taper:SK 40
control:HEIDENHAIN iTNC 530
rapid traverse in x-y-z axis:30-30-20 m/min
rapid traverse vertical:20 m/min
milling spindle motor:17,5 / 32 kW
total power requirement:26 kVA
weight of the machine ca.:7,3 t
dimensions of the machine ca.:4,00 x 2,50 x 2,40 m
5 -axis machining cente... more
|
|
x-travel 700 mm
y-travel 550 mm
z-travel 500 mm
table surface area 650 x 395 mm
spindle turning speed - stepless 20- 4200 U/min
spindle taper ISO 40 DIN 2079
feeds x/y/z 1 - 5000/10000 mm/min.
quill stroke vertical 95 mm
drive spindle motor 12 kw
control Heidenhain TNC 415
weight of the machine ca. 3,8 t
dimensions of the machine ca. 5 x 4,6 x 2,5 m
Bfatte9dqz
Electric 400 Volt
Cooling equipment
Fixed working table 1000 x 490 mm
Vertical milling head swivelling +/-
Cabin
Opposite bea... more
|
|
6
Hessisch Lichtenau, Germany
dealership location
6567 km
1981
used
Univ. tool room milling machine HERMLE UWF 801 type
Masch. No. 5089 built in 1981
Routes x 500 mm, Y: 430 mm, Z: 400 mm
Table size 800 x 395 mm
ISO 40 spindle adaptor
Spindle speed 63 up to 2800 RPM 12 steps
Feed X and Y 4 up 1600 mm/min.-stepless
Feed Z 4 up to 1000 mm/min stepless
Rapid traverse X and Y 1.6 m / min.
Rapid traverse Z 1 m / min.
Spindle motor 3 kW
Power supply 400 Volt, 50 Hz
Table load of 250 kg
-3-axis digital display HEIDENHAIN ND 750
-Vertical milling head right and left swi... more
|
|
5
from the dismantling of a Hermle UWF 1000:
Vertical milling head / spindle
Manufacturer: Hermle
Pk2xom9c
Type: UWF 1000 and comparable
Tool holder: SK40
Condition: used / used
This offer is aimed at professionals.
Prices quoted are net.
We are happy to prepare a personal offer for you.
To do so, please send us your full contact details.
Offer subject to change, intermediate sale reserved.
Internal No.: 1273 more
|
|
3
We exhibit: STYLE510x1350 mm MC750 aufNortec 202021.01.2020-24.01.2020Hall A1, Booth 219Hermle UWF 1001H with Heidenhain iTNC 415 Traverse paths X,Y,Z 700 x 550 x 500 mmTable clamping surface horizontal table 1000 x 490 mm Spindle speeds - infinitely variable 20- 4200 rpmSpindle mounting ISO 40 DIN 2079 Feeds x/y/z 1 - 5000 mm/min.Pin sleeve stroke 95 mm drive Main spindle motor 12 KW Machine weight approx. 3.8 t Space requirement approx. 5 x 4.6 m Height approx. 2.5 m EQUIPMENT and ACCESSORIES ... more
|
|
2
with 3-axis digital display Heidenhain
Ways X/Y/Z= 410/310/400 mm
vertical milling head
Spindle SK 40
Speed 45 - 2000 rpm.
fixed angle table 700 x 300 mm
Ysboq8 more
|
|
3
x-travel 600 mm
y-travel 400 mm
z-travel 420 mm
rotary table dia. 380 mm
spindle taper SK 40
control HEIDENHAIN
control TNC 407
spindle head swivable left - right 90 °
diameter of quill 100 mm
quill stroke 75 mm
spindle turning speed range 20 - 4000 U/min
transmission ratio 3
feeds longditudinal/cross/vertical 1 - 5000 mm/min
rapid motion -longitudinal/cross/vertical 7 / 7 / 6 m/min
Nlo2p
spindle throat 40 - 440 mm
distance spindle nose/ table min./ max. 63 / 483 mm
ATC 32 Pos.
workpiece dia... more
|
|
7
CNC Vertical Machining Center HERMLE C 40 UWith contouring control Heidenhain iTNC 530Year of construction: 2005 Traverse paths : X 850 Y 700 Z 500Speed range : 20 - 18.000 rpm infinitely variable ( SK 40)With the following accessories:NC swivel rotary table Ø 420 mmVertical tool changer with 38 magazine places ( SK 40 )Additional magazine 43 places ( ZM 43)Linear axes Standard versionBlowing device , Bed flushingScratch belt conveyorCoolant deviceManual cabin door , Manual cabin roofComposite g... more
|
|
10
x-travel 600 mm
y-travel 450 mm
z-travel 500 mm
Control Heidenhain
Main spindle:
turning speed range - main spindle 20 - 6.300 min/-1
power capacity - main spindel 8,5 kW
transmission ratio 3
tool taper SK 40 DIN69872-19
distance spindle /table hor.: 165 / 665 mm
distance spindle /table vert.: 73 / 573 mm
swivellable +/- 90 °
Cj3uk8x8
diameter of quill 110 mm
quill stroke 75 mm
spindle bearing diameter h: 75 / v: 55 mm
work table:
table surface area 900 x 458 mm
number of T-slots 7
T-slo... more
|
|
6
Ubstadt-Weiher, Germany
6595 km
excellent (used)
Universal milling machine Hermle UWF 802M with HS 401 line control Super CONDITION !!Technical data: ᐳᐳ Year of construction approx. 1994 Machine no.10546ᐳᐳ Rigid angular table ᐳᐳ Speed: 17 to 3550 U/minᐳᐳ Feed infinitely variable in 3 axes from 0 to 1600 mm/min ᐳᐳ Drive power .:6 KW ᐳᐳ Travels X/Y/Z: 500/430/400 mm ᐳᐳ Vertical quill and horizontal quill - SK40ᐳᐳ Hydraulic tightening system ᐳᐳ Weight approx 1800 Kgᐳᐳ Dimensions Length 1.8 m , Width 1.8 m , Height 1.9 m Accessories and equipment:... more
|
|
3
with line control Heidenhain TNC 114
Ways X/Y/Z= 500/430/400 mm
Speed range 71-3550 rpm.
Vertical milling head with execution quill
Spindle SK 40
machine light
fixed angle table 800 x 400 mm
counterholder
Bgot0vpn3z more
|
|
5
x-travel:600 mm
y-travel:450 mm
z-travel:450 mm
spindle speed::10000 U/min
tool taper:SK 40
total power requirement:27 kVA
rapid traverse:40 m/min
internal coolant system feed:80 bar
weight of the machine ca.:6 t
Bfv92hdfuy more
|
|
7
CNC Vertical Machining Center HERMLE C 40 UWith contouring control Heidenhain iTNC 530Year of construction: 2007 Traverse paths : X 850 Y 700 Z 500Speed range : 20 - 18.000 rpm infinitely variable ( SK 40)With the following accessories:NC swivel rotary table Ø 420 mmVertical tool changer with 38 magazine places ( SK 40 )Additional magazine 43 places ( ZM 43)Linear axes Standard versionBlowing device , Bed flushingScratch belt conveyorCoolant deviceManual cabin door , Manual cabin roofComposite g... more
|
|
2
Warstein, Germany
6472 km
ready for operation (used)
from the dismantling of a Hermle UWF 851:control panel / control unit type: for Hermle UWF 851Condition: used / usedThis offer is directed to commercial persons.prices are net.we are happy to make a personal offer for you.please send us your complete contact details.offer subject to confirmation, subject to prior sale.internal No.: 1298
Npusr more
|
|
3
Großhansdorf, Germany
dealership location
6490 km
1999
used
x-travel 800 mm
y-travel 500 mm
z-travel 500 mm
control Heidenhain TNC 430
surface area 800 x 500 mm
Number of working hours 34600 h
spindle hours 14900 h
weight of the machine ca. 8 t
dimensions of the machine ca. L 5 x B 3,5 x H 2,95 m
The machine is in good condition.
Supplied with a chip conveyor.
The clamping devices are not included.
A tour of the machine under power is possible by appointment.
Bfxltuikdt
*** Changes and errors in the technical data and information as well
Subject ... more
|
|
1
Controller: Heidenhain TNC 425,Travel X,Y,Z: 850,630,500 mm,Working table XxY: 120mm x 55mm,Tool holder: SK 40,
Rr0voc7g more
|
|
3
with Heidenhain TNC 426 contouring control
Heidenhain push button TS 220
Bgotvajdag
Travel X/Y/Z= 630 (875)/500/500 mm
Spindle SK 40 DIN 69871
fixed angle table 900 x 528 mm
Spindle speed 2 gear steps 20-7000 rpm.
Tool changer HTC 16, 16-fold
electr. handwheel more
|
|
x-travel:700 mm
y-travel:550 mm
z-travel:500 mm
Uwwj7xe3s
feed speeds:1 - 2000 mm/min
Table area:800 x 500 mm
rapid traverse:5 m/min
spindle turning speed range:25 - 3150 U/min
spindle taper ISO:40
spindle diameter in front bearing:70 mm
spindle motor:7 kW
quill stroke:100 mm
total power requirement:12 kW
weight of the machine ca.:3,3 t
dimensions of the machine ca.:3,5 x 2,8 x 2,1 m
HEIDENHAIN TNC 355 CNC control for 4 axis
NC table [...] swivelling
Heidenhain touch probe
coolant device, moto... more
|
|
4
Kirchlengern, Germany
dealership location
6457 km
used
Another 28 days
CNC vertical machining center, manufacturer: HERMLE, type: C40, year of construction: 2009, serial no.: 19883, travel x/y/z-axis 850x700x500 mm, max. spindle speed 18,000 rpm, Total operating hours read/spindle: 82.090/29.493, with: 1 CNC control HEIDENHAIN iTNC530, 1 NC swivel rotary table, Ø approx. 800 mm, 1 internal coolant supply, 38-fold tool changer, 1 chip conveyor
Baurzd more
|
|
10
x-travel 1.200 mm
y-travel 900 mm
z-travel 500 mm
control TNC 430 Heidenhain
Main spindle:
turning speed range - main spindle 20 - 15.000 min/-1
power capacity - main spindel 10,5 kW
tool taper SK 40
spindle diameter in front bearing 70 mm
distance table - spindle center max. 680 mm
distance table - spindle center min. 180 mm
work table:
Clampingarea 1.400 x 900 mm
T-slots 14 H12
Tool-Presetter:
number of toolpositions 30 pos.
max. tool diameter 80 mm
max. tool-dia with free toolbox 125... more
|
|
5
control Fanuc OT
x-travel 850 mm
y-travel 630 mm
z-travel 500 mm
Be7yhrqmwh
table: 1.200 x 560
tool taper SK40
weight of the machine ca. 4,5 t
z-axis overhoul in 2017 more
|
|
1
Controller: Heidenhain TNC 355,Travel X,Y,Z: 700,450,500 mm,Max. Spindle speed: 4.000 U/min,Spindle capacity: 12 kW,
Hsnjmsf more
|
|
6
Ubstadt-Weiher, Germany
6595 km
excellent (used)
Universal milling machine Hermle UWF 802M with HS 401 line control Super CONDITION !!Technical data: ᐳᐳ Year of construction approx. 1994 Machine no.10545ᐳᐳ Rigid angular table ᐳᐳ Speed: 17 to 3550 U/minᐳᐳ Feed infinitely variable in 3 axes from 0 to 1600 mm/min ᐳᐳ Drive power .:6 KW ᐳᐳ Travels X/Y/Z: 500/430/400 mm ᐳᐳ Vertical quill and horizontal quill - SK40ᐳᐳ Hydraulic tightening system ᐳᐳ Weight approx 1800 Kgᐳᐳ Dimensions Length 1.8 m , Width 1.8 m , Height 1.9 m Accessories and equipment:... more
|
|
x-travel 400 mm
y-travel 290 mm
z-travel 380 mm
table-size 700 x 285 mm
control Heidenhain TNC 135
tool adaptor ISO 40
turning speed range 40- 2.000 U/min
rapid speed 1,5 m/min
feed speeds 1500 mm/min
power requirement 2.2 kW
quill stroke 63 mm
dimensions 2,4 x 2,6 x 1,7 m
weight 1,3 t
total power requirement kW
weight of the machine ca. 1,5 t
Beny8vkv0v
dimensions of the machine ca. 1,8 x1,8 x 1,8 m
auxiliary equipment:
- hydraulic tool clamping
- cooling system more
|
|
6
1 piece CNC machining center C 40 U
with 5-axis simultaneous Heidenhain control iTNC 530
Make: Hermle
Year of construction: 2002
Technical data
Work area:
- travels
X-axis 850 mm
Y-axis 700 mm
Z-axis 500 mm
Swivel range A and B-axis +25° / -110°
(driven on both sides)
- Measuring system direct - resolution 0,0001 mm
- NC swivel table 800 mm diameter
- Table load 1400 kg
- Speed A-axis 25 1/min
- Speed C-axis 65 1/min
Main spindle drive:
- Drive power/torque (40% ED) 15 kW / 130 Nm... more
|
|
x-travel 600 mm
y-travel 450 mm
z-travel 400 mm
table-size 850 x 440 mm
spindle taper SK 40
control HEIDENHAIN TNC 355
ATC 32 Pos
spindle turning speed range 20 - 4000 U/min
spindle drive 5,9 kW
quill stroke 80 mm
feeds longditudinal/cross/vertical 1 - 2000 mm/min
power feed x/y/z 7200 N
rapid traverse longitudinal and cross 10 m/min
rapid traverse vertical 10 m/min
Ptxnxq
total power requirement 12 kW
weight of the machine ca. 3 t
dimensions 2,7 x 2,5 x 2,0 m
Acc.: NC-dividing unit (=4th a... more
|
|
|
