Univ. tool milling machine HERMLE type UWF 802 M
machine No. 11156 Year of construction 1995
Travel distances X: 500 mm, Y: 430 mm, Z: 400 mm
Table size 800 x 390 mm
Spindle mount ISO 40
Spindle speed 71 to 3550 rpm 18 steps
Feed rate X and Y 4 to 1600 mm/min. infinitely variable
Feed Z 4 up to 1000 mm/min. infinitely variable
Rapid traverse X and Y 1.6 m/min.
Rapid traverse Z 1 m/min.
spindle drive 3 kW
Power supply 400 Volt, 50 Hz
- Control Heidenhain TNC 124
- Vertical milling head swivels ri...
Hermle UWF 802 M tool room milling machine with Hermle HS track control. Machine is in good working condition, under current demonstration ready.
Bbmqjbfwki
Control HS401 path control
Ca2swywu
Travel X / Y / Z: 500/430/400 mm
Spindle speed 3550 rpm
Hydraulic tool clamping
with HEIDENHAIN TNC 124 control
= Way X/Y/Z 500/430/400 mm
71-3.550 speed range RPM.
73zmz8lg8
Vertical milling head with ausf. Quill
Spindle SK 40
Universal Swivel Tilt and swivel table 650 x 395 mm
Coolant system
Universal milling machine Hermle UWF 802M with Heidenhain TNC124 line control in super CONDITION !
Technical data:
>> year of construction approx. 1995 machine no. 10398
>> Rigid angle table
>> Speed: 17 to 3550 rpm
>> feed infinitely variable in 3 axes from 0 to 1600 mm/min
>> Drive power .:6 KW
>> Travel X/Y/Z: 500/430/400 mm
>> Vertical quill and horizontal quill - SK40
>> Hydraulic tightening system
>> weight approx. 2000 Kg
>> Dimensions length 1.8 m, width 1.8 m, height 1.9 m
Tjt2pxcm
Ac...
milling machine Hermle UWF 802M
Og3d9
in good repair
Rotational speed: 71-3550/min, controls: HERMLE HS 401, documentation available.
I9ebku2
Universal milling machine Hermle UWF 802M with Heidenhain TNC124 line control in super CONDITION !
Technical data:
>> year of construction approx. 1995 machine no. 9869
>> Rigid angle table
>> Speed: 17 to 3550 rpm
>> feed infinitely variable in 3 axes from 0 to 1600 mm/min
>> Drive power .:6 KW
>> Travel X/Y/Z: 500/430/400 mm
>> Vertical quill and horizontal quill - SK40
>> Hydraulic tightening system
>> weight approx. 2000 Kg
>> Dimensions length 1.8 m, width 1.8 m, height 1.9 m
Accessories ...
Universal milling machine Hermle UWF 802 M with HS 401 control Super condition!
Technical data:
ᐳᐳ built around 1995 machines-Nr. 10254
Bdnwlsa8n9
ᐳᐳ solid angle table of ᐳᐳ speed: 17-3550 RPM
ᐳᐳ feed continuously in 3 axes from 0 to 1600 mm / min ᐳᐳ power.: 6 KW ᐳᐳ traverse path X/Y/Z: 500/430/400 mm ᐳᐳ vertical spindle and horizontal Quill - SK40
ᐳᐳ hydraulic tightening system ᐳᐳ weight approx. 1800 kg
ᐳᐳ extent length 1.8 m, width 1.8 m, height 1.9 m
Accessories and equipment:
ᐳᐳ HS 401...
Universal milling machine Hermle UWF 802M with HS 401 line control Super CONDITION !!Technical data: ᐳᐳ Year of construction approx. 1994 Machine no.10546ᐳᐳ Rigid angular table ᐳᐳ Speed: 17 to 3550 U/minᐳᐳ Feed infinitely variable in 3 axes from 0 to 1600 mm/min ᐳᐳ Drive power .:6 KW ᐳᐳ Travels X/Y/Z: 500/430/400 mm ᐳᐳ Vertical quill and horizontal quill - SK40ᐳᐳ Hydraulic tightening system ᐳᐳ Weight approx 1800 Kgᐳᐳ Dimensions Length 1.8 m , Width 1.8 m , Height 1.9 m Accessories and equipment:...
Universal milling machine Hermle UWF 802M with HS 401 line control Super CONDITION !!Technical data:ᐳᐳ Year of construction approx. 1995 Machine no.10608ᐳᐳ Rigid angular table ᐳᐳ Speed: 17 to 3550 U/minᐳᐳ Feed infinitely variable in 3 axes from 0 to 1600 mm/min ᐳᐳ Drive power .:6 KW ᐳᐳ Travel X/Y/Z: 500/430/400 mm ᐳᐳ Vertical quill and horizontal quill - SK40ᐳᐳ Hydraulic tightening system ᐳᐳ Weight approx 1800 Kgᐳᐳ Dimensions Length 1.8 m , Width 1.8 m , Height 1.9 mAccessories and equipment:ᐳᐳ ...
x-travel 400 mm
y-travel 290 mm
z-travel 380 mm
table-size 700 x 285 mm
control Heidenhain TNC 135
tool adaptor ISO 40
turning speed range 40- 2.000 U/min
rapid speed 1,5 m/min
feed speeds 1500 mm/min
power requirement 2.2 kW
quill stroke 63 mm
dimensions 2,4 x 2,6 x 1,7 m
weight 1,3 t
total power requirement kW
weight of the machine ca. 1,5 t
dimensions of the machine ca. 1,8 x1,8 x 1,8 m
auxiliary equipment:
Beny8vkv0v
- hydraulic tool clamping
- cooling system
x-travel 600 mm
y-travel 400 mm
z-travel 420 mm
control TNC 355 Heidenhain
Main spindle:
turning speed range - main spindle 20 - 4.000 min/-1
power capacity - main spindel 7 kW
transmission ratio 3
tool taper SK 40
distance spindle /table 127 - 567 mm
spindle diameter in front bearing 55 mm
stroke of quill vertical 75 mm
tool clamping 10 kN
swivellable +/- 90 °
work table:
table surface area 900 x 458 mm
T-slots 7x 63 x 14H7
feeds:
feed range 1 - 5.000 mm/min
Feed force 5,4 kN
rapid tr...
x-travel:700 mm
y-travel:550 mm
Uwwj7xe3s
z-travel:500 mm
feed speeds:1 - 2000 mm/min
Table area:800 x 500 mm
rapid traverse:5 m/min
spindle turning speed range:25 - 3150 U/min
spindle taper ISO:40
spindle diameter in front bearing:70 mm
spindle motor:7 kW
quill stroke:100 mm
total power requirement:12 kW
weight of the machine ca.:3,3 t
dimensions of the machine ca.:3,5 x 2,8 x 2,1 m
HEIDENHAIN TNC 355 CNC control for 4 axis
NC table 4.axis, swivelling
Heidenhain touch probe
coolant device, mo...
x-travel 600 mm
y-travel 450 mm
z-travel 400 mm
table-size 850 x 440 mm
spindle taper SK 40
control HEIDENHAIN TNC 355
ATC 32 Pos
spindle turning speed range 20 - 4000 U/min
spindle drive 5,9 kW
Ptxnxq
quill stroke 80 mm
feeds longditudinal/cross/vertical 1 - 2000 mm/min
power feed x/y/z 7200 N
rapid traverse longitudinal and cross 10 m/min
rapid traverse vertical 10 m/min
total power requirement 12 kW
weight of the machine ca. 3 t
dimensions 2,7 x 2,5 x 2,0 m
Acc.: NC-dividing unit (=4th a...
x-travel 850 mm
y-travel 630 mm
z-travel 500 mm
rotary table 800 Durchmesser
clamping plate vertical 550x368 mm
milling spindle SK 40
distance work spindle /surface of the table 645 mm
quill travel 85 mm
hob turning speeds 50-4200 U/min
feeds longditudinal/cross/vertical 0-10.000 mm/min
rapid traverse 10 m/min
spindle motor 11,5 kW
electrics - voltage/frequency 380/50 V/Hz
tool turret 32-fach
control Haidenhain TNC 415
total power requirement 18 kW
weight of the machine ca. 6,5 t
dimensions of...
x-travel 700 mm
y-travel 550 mm
z-travel 500 mm
table surface area 650 x 395 mm
spindle turning speed - stepless 20- 4200 U/min
spindle taper ISO 40 DIN 2079
feeds x/y/z 1 - 5000/10000 mm/min.
quill stroke vertical 95 mm
drive spindle motor 12 kw
control Heidenhain TNC 415
weight of the machine ca. 3,8 t
dimensions of the machine ca. 5 x 4,6 x 2,5 m
Electric 400 Volt
Cooling equipment
Fixed working table 1000 x 490 mm
Vertical milling head swivelling +/-
Cabin
Opposite bearing for ho...
x-travel:850 mm
y-travel:630 mm
z-travel:500 mm
table surface area:1.200 x 550 mm
tool taper:SK 40
tool change unit:46 Pos.
turning speed range - spindle:20 - 4.200 1/min
vertical head swivabilify:90
stroke of quill vertical:95 mm
feed range:1 - 10.000 mm/min
rapid traverse:10 m/min
control:TNC 425 HEIDENHAIN
weight of the machine ca.:6,5 t
Ytady8
CNC 3-axis universal machining center
quill,
el. handwheel,
splash guard,
coolant device,
chipcinveyor,
overhauled in 2012 !
x-travel 500 mm
y-travel 360 mm
z-travel 400 mm
Control TNC 407 / 415 Heidenhain
Main spindle:
turning speed range - main spindle 20 - 4.500 min/-1
power capacity - main spindel 6 kW
tool taper ISO 40 DIN 2079
tool clamping 10.000 N
spindle diameter in front bearing h: 55 / v: 55 mm
stroke of quill vertical 75 mm
work table:
table surface area 800 x 390 mm
T-slots 6x 63 x 14H7
feeds:
feed speeds max. 8.000 mm/min
feed power max. 10 kN
rapid traverse ( X / Y / Z ) 8 m/min
total power requ...
CNC milling machine Fabr.HERMLE Type:UWF 850 Bj.1986
with control Retofit in 2007 TNC 320.
Travel: X550mm Y450mm Z400mm
Table: 850mmX440mm
Spindle mounting : ISO40
Capvnrg3
spindle speed : 40-2000rpm
The axis controllers must be reset or replaced.
Complete documentation available.
x-travel 700 mm
y-travel 550 mm
z-travel 500 mm
spindle taper ISO 40
Bkpll3stlv
control Heidenhain
type TNC 155
milling-head swivable +/-
boring spindle
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
x-travel 410 mm
y-travel 310 mm
z-travel 400 mm
tool taper ISO 40
spindle turning speed range 40 - 2000 U/min
table-size 700 x 280 mm
surface area 830 x 224 mm
total power requirement 2,2 kW
Bkav302dqm
dimensions of the machine ca. 1,4 x 2,1 x 2,0 m
Control Heidenhain TNC 145
x-travel: 600 mm
y-travel: 450 mm
z-travel: 400 mm
control: Heidenhain TNC 425
spindle taper ISO: SK 40 DIN 69871
quill stroke vertical: 75 mm
Nkyqp
distance between column - table edge: 190 (fest) vertikal mm
spindle head swivable left - right: 90° Vertikal-Spindel °
distance between table/spindle: min./max.: 165/565 Vertikal-Spindel mm
distance between table/spindle: min./max.: 165/565 Horizontal-Spindel mm
turning speed range: 20 ... 4500 U/min
tool changer with: 32 tools (Typ HTC 32)
feed:...
Sell good condition Hermle UWF 900W from a tool shop.
Bq2zicg3os
x-travel 600 mm
y-travel 400 mm
z-travel 420 mm
control TNC 407 Heidenhain
Main spindle:
turning speed range - main spindle 20 - 4.000 min/-1
power capacity - main spindel 7,0 / 8,5 kW
tool taper SK 40
stroke of quill vertical 75 mm
tool clamping 10 kN
work table:
table surface area 900 x 458 mm
max. table load 400 kg
T-slots 7x 63 x 14H7
Tool-Presetter:
number of toolpositions 32 pos.
max. tool length 250 mm
max. tool diameter 100 mm
max. tool weight 8 kg
feeds:
feed range 1 - 6.000 ...
x-travel 850 mm
y-travel 630 mm
z-travel 500 mm
milling spindle SK 40
quill travel 95 mm
hob turning speeds 20-4200 U/min
feeds longditudinal/cross/vertical 0-10.000 mm/min
rapid traverse 10 m/min
spindle motor 11,5 kW
electrics - voltage/frequency 380/50 V/Hz
Oddpoj3no
control Haidenhain TNC 407
clamping table 1200x560 mm
distance work spindle /surface of the table 645 mm
table load 700 kg
spindle head swivable left - right +/-75 °
total power requirement 16 kW
weight of the machine ca. 5,5 t
...
x-travel 500 mm
y-travel 360 mm
z-travel 400 mm
Control Siemens 810
tool taper SK 40
Giwv00r
table surface area 800x390 mm
T-slot - width 14H7 mm
number of T-slots 6
T-slot - distance 63 mm
turning speeds 20-4000 U/min
transmission ratio 4
Feed 1-2000 mm/min
rapid traverse 5 m/min
total power requirement 9 kW
weight of the machine ca. 2 t
dimensions of the machine ca. 2,5x2,9x1,9 m
x-travel 850 mm
y-travel 630 mm
z-travel 500 mm
spindle turning speed range 20 - 5000 U/min
table-size 1200 x 550 mm
spindle drive 11,5 kW
tool taper ISO 40
feed 1... 2000 / 15000 mm/min
rapid traverse 15 m/min
B0z3cnxk
total power requirement 23 kW
weight 6500 kg
dimensions of the machine ca. 3,8 x 3,3 x 2,6 m
Control TNC 426
x-travel: 600 mm
y-travel: 450 mm
z-travel: 400 mm
tool taper: HSK (SK40)
control: Heidenhain TNC 425
quill stroke vertical: nicht bekannt mm
turning speed range: 2400 - 24.000 U/min
feed:: 1 ... 5000 m/min m/min
table surface area: 850 x 440 mm
table swivelabel +/-: starr °
Bn00o8ctxl
table load: 500 kg
Tool changer: mit 32 Stationen
total power requirement: kVA
weight approx.: 3600 kg
dimension machine xH: 2,5 x 3,0 x 2,1 m
dimensions electric cabinet: L:1550 X B:550 x H:1700 mm
Universal Mill...
Hermle UWF 801 tool milling machine with Heidenhain 3-axis digital display. Machine is in good operational condition, ready to be demonstrated under power.
Bfimrker3d
Tool room milling machine Hermle UWF 902 S 07-07-241
End2g7z
Delivery time: immediately
Number: 07-07-241
Machine data
Year of construction: approx. 1996
L x W x H: approx. 4000 x 2800 x 2400 mm
Weight: about 4000 kg
Very good general condition
Technical specifications
Control: Heidenhain TNC 426
Travels:
X axis: approx. 600 mm
Y axis: approx. 450 mm
Z - axis: approx. 500 mm
Spindle:
Speed range: approx. 20 - 6300 rpm
Tool holder: SK 40 DIN 69871
Feeds & rapid traverses:
Feed ra...
Milling machine Hermle UWF 902 S
x-travel: 600 mm
y-travel: 450 mm
z-travel: 500 mm
control: Heidenhain TNC 426
spindle mounting ISO: SK 40
Accessories:
SK 40 receptacles 12 pieces
Total power: 16 kVA kW
Weight approx.: 5 kg
Dimension machine approx. LxWxH: 3.0 x 2,0 x 2,15 m
Bqcfjzxh2j
For further questions please contact us
x-travel 700 mm
y-travel 550 mm
D8fxek9
z-travel 500 mm
total power requirement 10 kW
weight of the machine ca. 3300 kg
dimensions of the machine ca. m
Control system: NC Heidenhain TNC 426 CZ
Sonde Heidenhain
Clamping surface: 1200 x 550 mm
Workpiece weight: max. 700 kg
Travel distances:
X : 850 mm
Y : 630 mm
Z - 500 mm
Tool : ISO40
Engine power : 11.5 kw
Speed max. 4200 RPM
Gvxmsg
Tool magazine : 34 positions
GO 2016:
New spindle
The exchange of cooling transmission
Diagnostics of control system cards
The exchange of communicationcable on the X-axis
x-travel: 600 mm
y-travel: 400 mm
z-travel: 420 mm
spindle taper ISO: SK 40
control: Heidenhain TNC 360
quill stroke vertical: 75 mm
turning speed range: 20 ... 4000 U/min
spindle head swivable left - right: 90° links / rechts °
feed:: X/Y/Z: 1...6000 mm/min.
feed:: X/Y: 7 m/min. + Z: 6 m/min.
Table dimensions: 900 x 460 mm
table swivelabel +/-:
table load capacity: 400 kg
weight approx.: 2300 kg
dimension machine xH: 4,0 x 3,8 x 2,0 m
total power requirement: 13 kW
Equipment:
- separated produ...
3754-5
Fraeskopf SK 40
passend zu HERMLE UWF 1000 oder vergleichbar
Telbcq
Abmessungen ca. 700 x 400 x 400 mm
Gewicht ca 130 kg
Travel X 700mm Y630mm, Z500mm
Control Heidenhain TNC 415
Tool changer 32 places
Measuring probe Heidenhain
Digitizer with different inserts
Full enclosure with new viewing panels
Z-axis spindle new approx. 50 operating hours ago
Yjn8au0u
well maintained machine with one previous owner
complete documentation.
Truck loading included in the price
x-travel 600 mm
y-travel 400 mm
z-travel 420 mm
Control HEIDENHAIN TNC 415 B
table-size 900x460 mm
turning speeds 4000 U/min
tool change unit 32-fach
tool taper SK 40
total power requirement 12 kVA
weight of the machine ca. 3,8 t
dimensions of the machine ca. 3,0x2,0x2,0 m
Olund
touch probe RENISHAW
electronical hand wheel
HEIDENHAIN TNC 415 B
rigid angle table
RENISHAW touch probe
32-fach tool changer SK 40
x-travel 600 mm
y-travel 400 mm
z-travel 420 mm
Control Heidenhain TNC 407
quill stroke 75 mm
table surface area 900x458 mm
Tool bore SK 40 DIN 2080 oder DIN 6
turning speed range - stepless 20-4500 U/min
transmission ratio 3
Bxlshdby
feed stepless 1-5000 mm/min
rapid motion -longitudinal/cross/vertical 7-7-6 m/min
total power requirement 13 kW
weight of the machine ca. 2,5 t
dimensions of the machine ca. 4x3,8x2,0 m
x-travel 850 mm
y-travel 500 mm
z-travel 630 mm
Control HEIDENHAIN TNC 426
total power requirement 20 kW
weight of the machine ca. 6500 kg
dimensions of the machine ca. m
H E R M L E
CNC Controlled Universal Toolroom Milling Machine with 4.Axis
Model UWF 1202 H CNC Year 1996 11 428
_____
Table slide longitudinal X 850 mm
vertical Z 630 mm
Milling slide travel, cross Y 500 mm
Table size, angualar table 1200 x 550 mm
Workpiece weight max. 700 kg
Spindle taper SK 40
21 Spindle speeds...
x-travel: 850 mm
y-travel: 630 mm
z-travel: 500 mm
control: Heidenhain TNC 426
spindle taper ISO: SK 40 DIN 69871
quill stroke vertical: 110 mm
turning speed range: 20 - 529 / 530 - 1440 / 1441 - 5000 / 3 step U/min
spindle head swivable left - right: +/- 75 ° °
feed:: x+y+z: 1 ... 2000 manuell mm/min
feed:: x+y+z: 1 ... 10 000 programmierbar
Tool changer: HTC mit 34 Stationen
rapid traverse: 10 m/min
Table dimensions: 1200 x 550 mm
table:: starr
spindle hours: ca. 11 000 h
operating hours - idl...
tool taper ISO 40
spindle speed 40 - 6000 r./min
Spindle capacity 3,35 kW
diameter of round table 350 mm
travel X: 320 mm
travel Y: 280 mm
Bebv30h8h7
travel Z: 350 mm
quill stroke 63 mm
overhaul by HERMLE 1996, protocol available
path control Heidenhain TNC 155
NC round table, tiltable
vertical milling head with quill
coolant attachment
splash guard cabin
Hermle UWF 902 H
Work area :
X axis : 600 mm
Boxnnblrjm
Y-axis: 450 mm
Z-axis: 500 mm
Main drive :
Speed range : 20... 6300 min-1
Tool holder : ISO 40 DIN 2079
Feed drive :
Pre-school area in X, Y, Z manual / program controlled
q...2000/10000 mm/min
Rapid traverse in all axes 10m/min
Universal milling machine Hermle UWF 801
3-axis digital display Heidenhain with HS262 route control very good condition!
Technical specifications:
- year of construction about 1990 machine no. 8713
E3aoldt
- Rigid angle table
- Speed: 0 to 2500 rpm
- Infinitely variable feed in 3 axes from 0 to 1600 mm / min
- Drive power.: 5 KW
- Travel X / Y / Z: 510/450/410 mm
- Vertical quill and horizontal quill - SK40
- Hydraulic tightening system
- Weight about 1500 kg
- Dimensions length 1.8 m, width 1.8...
With Heidenhain TNC-135
Handwheels
Traverse paths: 500 x 430 x 400 mm
Drive power: 3 kW
Speed range 50 - 2500 rpm,
horizontal milling attachment
Vertical spindle can be swivelled away to the side.
Space requirement approx. 2.3 x 2.3 x 1.8 m
Weight approx. 1100 kg.
Accessories:
rigid table 800 x 350 mm
Spaenewanne,
Bnz83pzbg0
Coolant system,
Machine is still under power.
3
from the dismantling of a Hermle UWF:
Permanent magnet motor
Manufacturer: Siemens
Type: 1 HU3074-0AC01-Z
condition: used / used
Express delivery is possible at extra charge.
Nu7cn
You receive a 14-day "function/commissioning guarantee" on all articles.
Should an article be defective contrary to expectations, we will provide a replacement (if available) or refund the full purchase price.
x-travel: 600 mm
y-travel: 450 mm
z-travel: 500 mm
control: Heidenhain TNC 426
spindle taper ISO: SK 40 DIN 69871
spindle head swivable left - right: 90 °
Blztotrza
quill stroke vertical: 75 mm
turning speed range: 20 - 6.300 / 3 step U/min
feed:: X/Y/Z: 1 - 2000 manuell mm/min
feed:: X/Y/Z: 1 - 10.000 programmgesteuert mm/min
rapid traverse: X/Y/Z: 10 m/min
Tool changer: nein
Table dimensions: 900 x 530 mm
table load capacity: 500 kg
Number of working hours: siehe Foto h
spindle motor: 8,6 kW
i...
Table: 900 x 458 mm
Travel: 600 - 450-500 mm
Spindle retainer: SK 40
Spindle speed: 20 to 6,300 RPM
Forward speed: 1 to 2,000 m / min
Rapid traverse rate: 10,000 m / min
Control: HH TNC 426
Tool changers: HTC 34 36 fold connection: 16 kW
Bc0a3pbaj0
Equipment: 4.Achse, tool changers, Electr. Handwheel, key system TS550
Condition: good, donors must be repaired
Weight: 6 tons
Size: 2,200 x 3,800 x 2300 mm
