Used Tool Milling Machine for sale (67,086)

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Fpjdpfx Aszuxn Tjl Uon Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 1988, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Fodpfx Alsrk Aaao Uepn

Year of construction: 1976, condition: good (used), Deckel FP1 tool milling machine, 3-axis Heidenhain digital readout, machine was overhauled by FPS years ago. Rigid table, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, paint is no longer so nice, can be demonstrated under power by arrangement. Fpedpfxsrhzcuj Al Usn

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) Fsdpfxoxxb Rro Al Uepn (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Friedrich Deckel FP 2 LB Tool Milling Machine The accessories are not included in the scope of delivery but can be purchased in another auction at this link. Lot of Milling Tools The universal milling machine Deckel FP 2 LB is characterized by its extremely stable base and is designed as a floor-standing machine. This means that the machine retains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as American V8 engines. Furthermore, the long travel of 800 mm is advantageous in this application. Technical data: Deckel Universal Milling Machine FP 2 LB Digital display: 3-axis digital display Heidenhain Travel X-axis: 800 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Tool holder: SK 40 clamping thread S 20 x 2 Milling head type: Vertical milling head Speed range: 40 - 2000 rpm Number of steps: 18 Table type: universal swivel/tilt table (± 45° / ± 15°) Table clamping surface: 1000 x 520 mm T-slot size: 16 mm Fsdpfjgyw S Tex Al Uopn Vise 160 mm Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), functionality: fully functional, overall weight: 700 kg, For sale is a used Deckel FP1 milling machine in good working condition. The machine has feed in the X and Z axes. Travel ranges XYZ: 300x150x340mm Tool holder: SK40 S20x2 Fedpfxez Aa Idj Al Uspn Spindle speeds: 40-2000 rpm Quill with 60mm stroke Ideal machine for toolmaking or prototype production. Already the new version of the FP1 with selector dials for speed and feed selection. Included: - High-quality hydraulic vise - Chip tray Milling cutters and tool holders can also be included upon request. Loading options (forklift) are available. Shipping is also possible upon agreement. Inspection under power and collection in 5023 Salzburg.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Fpodpex D Tbmofx Al Usn Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs Fjdpfxey Ni Ivj Al Uepn For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1988, Tool CNC Milling Machine HERMLE type UWF 1000 CNC Year of construction: 1988 Travel X: 700 mm Travel Y: 550 mm Travel Z: 500 mm Fpodpsz Nx H Djfx Al Uen Numerical Command: HEIDENHAIN TNC 155 Spindle ISO 40 Spindle: Ø 70 mm Spindle speed: from 25 to 3150 RPM Table size: 1000 x 500 mm Vertical sleeve travel: 100 mm Swivel head Spindle motor: 6,9 kW Weight: 3,3 T Problem on CNC. Machine sold as it is. (Screen from CNC need to be changed)

Condition: good (used), Year of construction: 1989, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 M16 spindle holder. Good working condition, ready for demonstration under power by arrangement. Fedpfx Aotp Nyfel Uopn

Condition: good (used), Year of construction: 1980, Deckel FP1 Active milling machine with 3 axes, Heidenhain digital display, and angle table. SK 40 spindle mount. Good working condition, ready for demonstration under power upon request. Fpedpfx Ajwg S I Tsl Uen

Condition: ready for operation (used), Cover FP 1 Milling machine Traverse path X-axis: 300mm Y-axis travel: 160mm Z-axis travel: 340mm Mounting: SK 40 with tightening thread Feed X-axis: 290mm Weight: approx. 940 kg (with pallet) Space requirement: 1300mm x 1200mm x 1800mm ( L x W x H ) Dimensions with pallet: 1400mm x 1400mm x 2000mm ( L x W x H ) You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. Fpsdpfeuvih Hox Al Usn organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), Year of construction: 1987, Mikron WF2SA machining center with a 3-axis Heidenhain Aktiv digital control system. Fixed angular table, SK 40 spindle mount. Ready for operation. Machine can be demonstrated under power by arrangement. Fpedpfxszvyh Ds Al Uon

Condition: good (used), Mikron WF31D Precision Milling and Drilling Machine Machine with chip and splash guard enclosure Equipped with a Heidenhain TNC355 control system Technical Specifications The WF 31 D is a precision milling and drilling machine for series production and CNC training. Drive via an automatically switchable stepped gearbox and Poly-V belt. Vertical spindle can be extended by 90 mm; conversion from vertical to horizontal machining is possible. Ball screws with DC drives enable simultaneous feed movements. Guides are protected against dust, chips and coolant. Technical Data Manufacturer: Mikron Type WF31D Control system: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Vertical movement (Z): 400 mm Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm Feed rate: 2-3000 mm/min Rapid traverse rate X/Y: 6000 mm/min, Z: 5000 mm/min Electrical Equipment Total installed rated power: 10.0 kW Installed useful power: 7.3 kW Operating voltage: 3 x 380 V - 50/60 Hz Protection class: IP 54 Max. permissible ambient temperature: +35 °C Relative humidity: 75 %. Dimensions and Weights Width: 2450 mm Length: 2800 mm Height: 2000 mm Fodpowiucfjfx Al Uopn Net weight of the machine: approx. 2570 kg. Heidenhain TNC355 Operating Manual Heidenhain TNC355 Programming Examples Heidenhain TNC 355 Service Manual More items - new and used - can be found in our shop! International shipping costs available upon request!

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Fedpfjq A Icqox Al Ujpn

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Fpjdpoxftqdjfx Al Uon Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: good (used), Year of construction: 1980, Mikron WF2 milling machine with a 3-axis Heidenhain digital display. Fixed angular table, SK 40 spindle mount. In good, operational condition, from a precision engineering workshop. Machine can be demonstrated under power by arrangement. Fedpjzq R Ahofx Al Uepn

Condition: good (used), Mikron WF 32 CH Universal Milling Machine Machine with chip and splash guard enclosure Fsdpjwit Rhjfx Al Ujpn Equipped with a Heidenhain TNC355 control system Technical Data Manufacturer: Mikron Type: WF 32 CH Control System: Heidenhain TNC355 Travel Ranges: X 560 mm, Y 500 mm, Z 400 mm Clamping Area: 530 x 900 mm Rapid Traverse Rates: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle Speed: 20 – 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg Heidenhain TNC355 Operating Manual Heidenhain TNC355 Programming Examples Heidenhain TNC 355 Service Manual More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, CNC universal tool milling machine DECKEL, type FP 4 ME - DEFECTIVE Machine No. 2205, Year of manufacture 1989 CNC path control: GRUNDIG Contur 3 - Control system does not boot up Travel ranges: X: 485 mm, Y: 385 mm, Z: 380 mm Table size: 800 x 460 mm Spindle mount: ISO 40 Spindle speed: 63 - 3150 rpm, 22 steps Feed rate range: 2 - 3000 mm/min, stepless Quill movement: Horizontal and Vertical Main spindle drive: 3.7 / 4.4 kW - Hydraulic tool clamping - Swiveling control panel - Electronic handwheel - Fixed angular table Fpodpfsz Ebvrsx Al Uon - Coolant system in the machine base - Control cabinet located next to the machine, dimensions L x W x H: 800 x 750 x 1150 mm Space requirement L x W x H: 2000 x 2000 x 2000 mm Weight approx.: 2400 kg Good condition - control system does not boot up.

Condition: repair required (used), Year of construction: 1989, functionality: limited functionality, !!! SPECIAL OFFER!!! For sale are 2 active milling machines of the brand Hermle and the type UWF 801 Price for both machines in a package One machine has an error when moving in Y, the 2nd machine is missing relays. The idea would be to make one machine out of 2. The value of a functional machine would be approx. 10,000 € What makes the machine special is its active control, which allows it to set feeds that stop at a predetermined level. The machine is easy to operate and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle holder ISO: SK40 Control: TNC 114 Spindle head swivels left and right: right/left = 90° ° Vertical quill stroke: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed rate:: X+Y: 4 - 1600 steples mm/min Feed rate:: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 iand Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Fpodpjt Ifm Nsfx Al Ujn Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, For sale: a DECKEL FP1 tool milling machine with a very extensive range of accessories and the original operating manual. The machine is in very good condition and is fully functional without any limitations. Price plus VAT. Fedjzr E D Njpfx Al Uspn Collection from Ahrensburg. Sale only within Germany.

Condition: used, Univ. Universal milling machine TOS, type FN 32 Year of manufacture: approx. 1980 Travel distances: X: 450 mm, Y: 240 mm, Z: 380 mm Table size: 700 x 300 mm Spindle mount: SK 40 - M16 Spindle speed: 63-2000 rpm, 18 steps Feed rate: 8-400 mm/min, 18 steps Rapid traverse rate: approx. 1400 mm/min Tailstock travel: 90 mm Main spindle motor power: 2.2 kW Connection power: 400 Volt, 50 Hz - 2-axis digital display Heidenhain, type 731B for the X and Y axes - Vertical milling head with boring quill, swiveling +/- 90° and horizontally extendable - Spindle speed via 18 gear stages - Coolant system in the machine base - Electrical control cabinet on the side of the machine - Fixed angle table - Support for horizontal milling - Keyway broaching attachment, 16 to 105 strokes, stroke up to 70 mm, swiveling +/- 90° - 1 piece tool holder SK 40 with slitting cutter Fpedpfx Asz Ebu Uol Uon - Control cabinet located beside the machine Space requirement L x W x H: 1500 x 1200 x 1970 mm Weight: 1650 kg Good condition

Condition: good (used), Year of construction: 1975, Deckel FP2 – 3-axis milling machine with Fagor digital display. The machine is in good condition and comes from a training department. It features a universal swivel rotary table and an SK 40 spindle mount. Accessories include various collets and milling arbors. Good, operational condition. Can be demonstrated under power by arrangement. Fodpszruudofx Al Uspn

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, spindle speed (max.): 2,000 rpm, spindle speed (min.): 80 rpm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, Universal milling machine Deckel FP1 – Very good condition For sale is a Deckel FP1 universal milling machine in very good, well-maintained condition. The machine is equipped with a 3-axis digital display Heidenhain TNC 113 and stepless feed in all three axes. The Deckel FP1 is known for its precision, reliability and durability and is ideal for toolmaking, single-part production, repair work and training companies. Technical data Manufacturer: Deckel Model: FP1 Year of manufacture: 1985 Machine number: 15082 Spindle speed: 80–2,000 rpm Drive power: 1.6 / 2.0 kW Stepless feed in X, Y and Z axis Rapid traverse in all three axes Travel ranges (X/Y/Z): 300 / 160 / 340 mm Fixed angular table Vertical milling head on spindle head, adjustable by 100 mm Vertical and horizontal spindle with SK40 collet Clamping system: S20x2 Spindle brake Space requirement: 1.30 m x 1.10 m x 1.60 m (L x W x H) Machine weight: approx. 850 kg Equipment Fedpfxozlnmmj Al Uspn - 3-axis digital display Heidenhain TNC 113 - Hydraulic vise - Coolant system - Operating manual The machine is in very good technical and optical condition and is ready for immediate use. An inspection and a test run can be arranged at any time by appointment.

Condition: good (used), Tool Milling Machine Stock number: 3008 Fsdpewy Dl Dsfx Al Ujpn Manufacturer: Deckel Machine number: 46445 Type / Model: FP 2 Travel paths x-y-z: 400 - 200 - 400 mm Table: 700 x 285 mm Speed range: 40 to 2,000 rpm Spindle taper: SK 40 Feeds: 8 to 400 mm/min Connected load: 2.2 kW Accessories/Equipment: Elesta digital readout Condition: Good Weight: 1.2 t Dimensions: 1,000 x 1,200 x 1,800 mm