Tool Room Milling Machine - Universal

HERMLE UWF 900 E

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, machine/vehicle number: 9731, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 420 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, quill stroke: 75 mm, quill travel distance: 75 mm, quill diameter: 55 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 7 m/min, table length: 900 mm, table width: 458 mm, table height: 900 mm, type of input current: three-phase, total height: 1,890 mm, total length: 3,970 mm, total width: 3,740 mm, overall weight: 2,300 kg, input voltage: 380 V, space requirement width: 3,740 mm, space requirement length: 3,970 mm, space requirement height: 1,890 mm, milling spindle length: 75 mm, year of last overhaul: 2015, grinding spindle motor power: 59 W, Equipment: documentation/manual, rotational speed infinitely variable, Control system: HEIDENHAIN TNC 407 Kjdpfszyp Twox Aafenb Travel range: X = 600, Y = 400, Z = 420 mm Spindle speed range: 20 – 4000 rpm Gear stages: 3 Tool holder: SK 40 Arbor stroke: 75 mm Spindle motor: 5.9 kW Feed rate range: 1 – 5000/6000 mm/min (manual/program) Rapid traverse rate x, y: 7 m/min Rapid traverse rate z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electric handwheel, various tools (without cabinet).

Condition: used, Year of construction: 2011, Milling machine Quaser MV 184, year 2011. The machine is sold complete, as shown in the pictures. Includes hydraulic vices, power unit, chip conveyor, belt filter system and extraction unit. Knjdpjyfm T Hsfx Aafeb

Condition: good (used), Year of construction: 1995, Control: HEIDENHAIN TNC 415 B Travel: X= 600, Y= 400, Z= 420 mm Speed range: 20 – 4000 rpm Gear stages: 3 Spindle taper: SK 40 Kedpjw Uin Ssfx Aafsnb Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electronic handwheel, various tools (without cabinet)

Condition: good (used), Year of construction: 1991, Control: Heidenhain TNC 407 Travel range: X = 600, Y = 400, Z = 420 mm Knedpfjwvif Uox Aafob Spindle speed range: 20 – 4000 rpm Gear stages: 3 Tool holder: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed rate range: 1 – 5000/6000 mm/min (manual/program) Rapid traverse rate x, y: 7 m/min Rapid traverse rate z: 6 m/min Clamping surface: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electric handwheel, and measuring probe (defective).

Condition: like new (used), Year of construction: 2022, MAZAK QUICK TURN 250MY SmoothG Max. turning diameter: 380 mm Max. turning length: 504 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 80 mm The machine is equipped with: - CNC control: Mazatrol SmoothG - KITAGAWA 3-jaw chuck, BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder Knodpfxjzk I Tqs Aafsb - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. powered tool holders The machine has only 900 hours of pure machining time!!!

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Kedpfx Ael Dvx Eeafenb Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice 19 tool holders Coolant

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), 37kW Spindle Motor, Knodpjzh Nczjfx Aafeb 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Ksdst Rmdzopfx Aafonb Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis *

Condition: used, Year of construction: 2022, functionality: fully functional, DOOSAN PUMA GT 3100 M – UNUSED, PRE-OWNED MACHINE WITH ROBOT CELL A Doosan Puma GT 3100 M, manufactured in 04/2022, which has never been used in production after commissioning by the supplier (February 13, 2023). 0 production hours, no workpiece contact, technically and visually in new condition. Includes a factory-installed robot cell for automated loading. Origin: Liquidation of a user's operations in the Nuremberg area. On-site or video call inspection possible. KEY FEATURES - 12″ main spindle, high power and high torque for steel and stainless steel machining Knsdpezi Da Refx Aafjb - Driven tools VDI40/BMT 65P, milling, drilling and threading from the turret, complete machining in a single setup - Programmable tailstock with servo drive (Z2 axis) - Siemens Sinumerik 828D with 15″ touchscreen and ShopTurn workshop programming - 30° inclined bed, FEM optimized, cast iron - Halter LoadAssistant Universal Big 70 robot cell, mounted and ready for operation (see photos) FACTORY-INSTALLED SPECIAL EQUIPMENT (installed on the machine) - 24-tool turret BMT 65, Hirth gearing (1 s/position) - Automatic tool measuring arm (tool setter) - Tailstock programmable, hydraulic clamping, mount for rotating center - Auto-power-off after program end - Automatic door with servo drive - Three-jaw power chuck Ø 305 mm (12″) with hydraulic draw-in mechanism - 3x Eppinger driven tool holders (drilling/milling head, VDI40/BMT 65) - LNS hinged belt chip conveyor and LNS Turbo HB coolant filtration system - Dormatec ADF oil mist extraction system (filter level 99.97 %, 65 dB) - 20 kVA transformer separately wired - Absolute encoder on all axes HALTER LOADASSISTANT UNIVERSAL BIG 70 (Automation) A Halter robot cell with a Fanuc six-axis robot M-710iC/70 is mounted on the machine (see photos: robot arm with Halter lettering directly on the machine). Cell equipment: - Fanuc robot M-710iC/70, payload up to 70 kg - Workpiece placement via rotary table/loading tray - Workpiece-specific grippers for loading the main spindle - Safety enclosure The cell is designed for this machine and is ready for operation, eliminating the need for additional investment in automation. CONDITION Used machine, unused, no operating hours since installation at the original buyer. Sold "as is", warranty excluded (used machine). Inspection recommended before placing an order. OUR SERVICE On-site or online inspection in the Nuremberg area, transport, installation and commissioning as a separate package upon request, direct German-speaking contact person for spare parts and support, financing possible via leasing/hire-purchase partners, member of the FDM, the German trade association for wholesale trade in machinery and tools. Since this is a single unit, subject to prior sale. Call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: GE-50RAY, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, total width: 530 mm, total height: 770 mm, total length: 796 mm, overall weight: 254 kg, warranty duration: 36 months, height adjustment type: electric, door opening width: 530 mm, door opening height: 300 mm, table length: 203 mm, table width: 430 mm, laser wavelength: 1,064 nm, input frequency: 100 Hz, Equipment: cabin, Seize the opportunity and secure the 50 watt, 100 watt or 200 watt fiber laser! We will be happy to provide you with further information or an individual offer. Contact us today and find out more about the benefits of these outstanding products. We offer brand new fiber lasers with German user software and operating instructions. These devices are very easy to operate without any programming knowledge and are ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details (depending on model): Laser power: 50 watts, 100 watts or 200 watts Wavelength: 1064 nm Frequency range: 20-100 Hz Marking field size: 150x150 mm (options: 50, 70, 110 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: Simple preview Laser class: 1 Working temperature range: 14-30 ℃ Focusing: Electric lifting column with motor control Max. Component height: approx. 300 mm Connection: 230V Cooling: Air-cooled Weight: approx. 170 kg (depending on model) Operating costs: Low Service life: Over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Head 150x150 mm, other sizes available CE declaration of conformity Kedpfou Tkclox Aafenb guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Foot pedal Safety goggles Applications: Perfectly suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. Our fiber lasers are ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions. Additional options: 100 watt and 200 watt models are also available on request - ideal for larger projects or higher power and speed requirements!