Used Hermle U 1000 T for sale (163)

Condition: good (used), Year of construction: 1999, Hermle U 1000 T, Built in 1999, Heidenhain TNC 426 control, X/Y/Z travel 1000/630/550 mm, 16-station tool changer, SK 40 tool holder, Spindle speed up to 7,000 rpm, Nlodpfx Agewlqimjzoh Vertical spindle quill stroke 75 mm, Universal milling head 0-90°, Direct measuring systems, Table size 1200 x 630 mm, Heidenhain TS 632 touch probe, Electronic handwheel,

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 12263, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 7,000 rpm, quill stroke: 75 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table NC table: 500 mm C-axis: 360° B-axis: ±30° Rotational speed: 11 rpm Resolution: 0.001° Component accuracy: ±15'' Table load capacity: 300 kg Drive Drive power (100% / 40% duty cycle): 7.5 / 11 kW Torque (100% / 40% duty cycle): 266 / 390 Nm Speed range: 20 – 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Swivel range: 0 – 90° Feed drives Feed forces X, Y and Z: 8,000 N Rapid traverse: 15 m/min Feed screw diameter and pitch: 32 / 10 mm Measuring system Direct path measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm Tool system Spindle taper: SK 40 (similar to DIN 2079, for tool holders according to DIN 69871 A) Number of tool stations: 16 Tool diameter: 80 mm Tool diameter with free adjacent stations: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Nedpfx Ajw Rc Abogzelh Control unit: Heidenhain TNC 410 Electrical data Operating voltage: 400 V / 50 Hz Total connected load: 14 kVA Dimensions & Weight Dimensions (L x W x H): 3.0 x 2.3 x 2.2 m Weight: 4,800 kg

Year of construction: 1997, condition: ready for operation (used), X-travel: 630mm, y-travel: 500mm, z-travel: 500mm, table diameter: 900x528mm, NC rotary table diameter: 500mm, connected load: 14kVA, length: 3600mm, width: 3900mm, height: 2100mm, weight: 6t, with documentation. Njdjlc N Stepfx Agzjlh

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,249 h, functionality: fully functional, machine/vehicle number: 15137, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, table width: 800 mm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 28, Well-maintained machine with a spindle from 2022 TECHNICAL DETAILS Longitudinal travel (X): 1,000 mm Transverse travel (Y, slide): 630 mm Vertical travel (Z, milling head): 550 mm Control: Heidenhain TNC 430 C-axis: Full-featured A-head: Manually swivelable to 0° and 90° Spindle Spindle speed (max.): 7,000 rpm Spindle type: Geared spindle with high torque in the lower speed range Special feature: Suitable for M30 synchronous thread cutting Spindle head swivel (manual): ±90° Milling spindle diameter in the front bearing horizontal/vertical: 80 / 55 mm Tool changer: 28-station Working area Milling spindle vertical - Distance from milling spindle to top edge of rotary table: 130 - 680 mm Milling spindle horizontal - Milling spindle to the rotary axis of the milling head, rotary table: 140 - 690 mm Milling spindle vertical/horizontal - Distance from the milling spindle axis to the rotary axis of the milling head: 120/110 mm NC rotary table 4th axis: Ø 800 mm Nljdpfx Aswmm D Nogzeh Condition & Maintenance Spindle: renewed 2022 Maintenance: carried out regularly Geometry: laser measured 2022 Tool changer: lifting unit recently replaced Maintenance reports: available MACHINE DETAILS Control on: 35,165 h Machine on: 21,574 h Program run: 11,750 h Spindle on: 10,249 h Axes in motion: 10,285 h Weight: 6,500 kg Rated power (apparent power): 17 kVA Input current: three-phase EQUIPMENT - Documentation and manual - Chip conveyor - A-head with manual tilt function to 0° and 90° - Tool changer with new lifting unit - Spindle with high performance in the lower speed range, suitable for M30 synchronous threads - Maintenance and geometry reports available

Condition: ready for operation (used), Year of construction: 2000, operating hours: 14,430 h, functionality: fully functional, machine/vehicle number: 13479, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 300 kg, rotary table diameter: 500 mm, spindle speed (max.): 7,000 rpm, Machine can be shipped free of charge for €1,850 net! TECHNICAL DETAILS Control: Heidenhain TNC 410 Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table NC rotary table: 500 mm C-axis: 360° B-axis: ± 30° Speed: 11 rpm Resolution: 0.001° Part accuracy: ±15'' Table load: 300 kg Drive Drive power (100% / 40% duty cycle): 7.5 / 11 kW Torque (100% / 40% duty cycle): 266 / 390 Nm Speed: 20 - 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Swivel range: 0 - 90° Feed drives Feed forces X, Y and Z: 8,000 N Rapid traverse: 15 m/min Diameter and pitch of the feed spindles: 32 / 10 mm Measuring system Nedpfx Agovn Si Iezelh Direct position measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z axis according to VDI/DGQ 3441: 0.010 mm Tool system Spindle cone: SK 40 (similar to DIN 2079, for tool holders according to DIN 69871 A) Number of tool positions: 16 pieces Tool diameter: 80 mm Tool diameter with free adjacent positions: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Operating voltage: 400 V / 50 Hz Total power: 14 kVA Weight: 4,800 kg Dimensions: 3.0 x 2.3 x 2.2 m Control switch-on time: 50,052 h Program run: 15,142 h Spindle switch-on time: 14,430 h Coolant system Tank capacity: 120 l Flow rate at a flow pressure of 3 bar: 24 l/min

Condition: used, Year of construction: 2022, x-travel 450 mm y-travel 600 mm z-travel 330 mm Control Heidenhain TNC 640 spindle HSK A 63 turning speeds 18000 U/min swivable table: STP 320mm Tools changer 55 fach/tools Internal cooling system 80 bar Chip coveyor JA Spindle hours 7521 h Machine on 10.532 h weight of the machine ca. 8,7 t 5-axis CNC machining center -Equipment & accessories -Dynamic Efficiency (ACC, AFC, vortex milling), -Dynamic Precision (CTC,AVD,LAC), -Additional magazine ZM216, torque drive in the C axis, -Spur gear tandem drive -in the A-axis, car. Cabin roof including side panel, interior -Scratch belt conveyor, chip washing gun, electric. heat compensation, Nodpfjwh Uktex Agzjlh -Tool breakage monitoring, robot cell RS05-2

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, 5-Axis Machining Center Manufacturer: Hermle Model: C20U Year of Manufacture: 2008 Control: Heidenhain iTNC-530 Power-on hours: approx. 35,000 h Program run time: approx. 14,500 h S/N: XXXXX Technical Specifications: ----- • Travel range X-Y-Z: 600 x 450 x 450 mm • C-axis: 360° • A-axis: +/-115° • Swivel rotary table Ø280 mm • Spindle: 18,000 rpm • Magazine: 30x HSK-A63 Nlsdpfx Asxphurogzoh • Standard coolant system • Blowing air through spindle + blow-off device • 3D probe Renishaw • Blum laser for tool breakage detection and measurement • Electrical thermal compensation • Increased accuracy in X-Y-Z-A-C axes • Option: KinematicOpt • Chip tray Accessories: ----- • Documentation • Rinsing gun • Handwheel

Condition: good (used), Year of construction: 2007, Hermle C50 U 5 Axis CNC Machining Centre With Siemens 840D Control Table Dimension Ø1,150 x 900mm (9 'T' Slots). Maximum Table Load 2,000kg. Maximum Workpiece Ø1,000 x 810mm High. Axis Travel 'X'=1,000mm, 'Y'=1,000mm, 'Z'=750mm, 'A'=+100/-130°, 'C'=360°. Rapid Traverse 'X'=60m/min, 'Y'=60m/min, 'Z'=55m/min, 'A'=20rpm, 'C'=30rpm. Linear Acceleration 6m/s². Maximum Spindle Speed 12,000rpm. 42 Position ATC. Tool Change Time Chip To Chip (3 Axis) 7sec. Maximum Tool Ø95mm (Ø160mm Non Adjacent Tools), Maximum Tool Length 430mm, Maximum Tool Weight 15kg. S/No.18089 (2007). Nljdpfexq Elqox Agzsh With Knoll Coolant Paper Filtration Unit, Knoll Chip Conveyor, Blum Laser Tool Presetter & Handte Mist Extraction Unit & Signal Tower. Weight 21,500kg.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 52,715 h, Control Unit Brand HEIDENHAIN Model TNC 430 Main Drive Number of axis 5 Movement X-Axis Movement 800 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm A-Axis Movement +90° to -90° C-Axis Movement 360° Additional Equipment Nlodjxpkmkspfx Agzsh measuring probe not included This 5-axis Hermle C 800 U was manufactured in 1998. A CNC universal milling machine featuring a swivel rotary table with a 280 mm diameter, it operates with a Heidenhain TNC 430 CNC and a spindle cone of SK 40. With 67,073 operating hours, it remains in good condition. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 U machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2007, Universal Machining Center Machine type: Hermle U 740 Control: Heidenhain iTNC 530 Year of manufacture: 2007 Spindle running hours: 8,790 h Operating hours: 10,455 h TECHNICAL DATA: Travel distances: X-axis: 915 mm Y-axis: 500 mm Z-axis: 500 mm B-axis: -5 / +95° C-axis: 360° Rapid traverse (X/Y/Z): 30 / 30 / 20 m/min Number of controlled axes: 5 Distance table surface – spindle nose: mm Speed range: 12,000 rpm Drive power: 17.5 / 32 kW Torque: 108 Nm Tool holder: SK 40 Tool changer Tool positions: 28 NC rotary table Table size: Ø 630 mm Features: Internal coolant supply (IKZ): 60 bar Coolant tank: 640 l Chip conveyor 3D probe: Renishaw Njdpfx Aoxrcvcsgzslh Through-spindle air

Year of construction: 2002, condition: excellent (used), HERMLE C 800 U CNC machining center Accessories incl.: among others: 3D touch probe, tool holder set, various clamping devices, chip tray, hydr. aggregate, double back-up Technical Data Njdpfx Aomqk E Tjgzelh speed: 0- 18`000 rpm spindle nose: HSK-A63 Feeding speed: 1-35 m/min feed force: 8000 N X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm dimensions of the machine: 2700 x 2210 x 2930 mm Weight: 8500 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: reconditioned (used), Year of construction: 2016, CNC Vertical Machining Center HERMLE C 250 U With Heidenhain TNC 640 path control system Year of manufacture: 2016 Travel paths: X 600 Y 550 Z 450 Speed range: 20 – 18,000 rpm, infinitely variable Including the following accessories: - NC rotary tilting table Ø 450 mm x 360 mm (T-slots for rotary/tilting table) - Vertical tool changer with 30 magazine stations (HSK 63) - KinematicOpt hardware - ICS (internal coolant supply) 40 bar with paper band filter - Sealing air for scales - Police filter for ICS 40 bar - Scraper belt conveyor - Chip cart 450 l - Coolant system - Air blow-off device - Manual cabin door, manual cabin roof - Polycarbonate safety windows - Electronic thermal compensation iTNC 530 - Electronic handwheel - Tool measurement BLUM laser - 3D measuring probe Heidenhain - Chip wash gun - Oil mist extraction - Control cabinet cooling unit (RITTAL) Nlsdpsxnbxhsfx Agzeh - 4 height-adjustable machine feet - Operating manuals

Condition: excellent (used), Year of construction: 2004, CNC Machining Center Helme U 1130 Year of manufacture: 2004 Control: Heidenhain iTNC 530 With HSK 63 and swivel axis Technical data: Nljdoxl R Hijpfx Agzeh Traverse paths (X, Y, Z): 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Tool changer - number of positions: 28 -ICS (internal coolant supply) -Controlled B-axis in the milling head -Tool measurement -Chip conveyor

Condition: good (used), Year of construction: 2006, operating hours: 119,571 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 119,571 h, Spindle ON: 56,792 h Nsdpexcp Srefx Agzjlh - Spindle HSK-A63 10,000 rpm - 32 tool stations - Rotary table SRT 280 mm with integrated clamping system HSK100 (if not needed, it can be covered or alternatively converted to a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool stations plus 87 additional stations ZM87 - Thermal compensation - BLUM tool measurement on the side - Renishaw probe - Chip container - Status light The machine has been thoroughly inspected and comes with a geometry report as well as circularity test measurements. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: ready for operation (used), Year of construction: 2001, Control Unit Brand HEIDENHAIN Model TNC 430 Main Drive Spindle speed range 15000 Number of axis 5 Movement X-Axis Feed Force 30000 m/min Y-Axis Feed Force 30000 m/min Z-Axis Feed Force 30000 m/min Media Chip conveyor Yes Additional Equipment Nledpfxsw U E Nfe Agzoh Oil mist extraction Electronic handwheel Chip flushing gun Machine bed flushing NC swivel table Blow-off device Closed roof 200-liter coolant tank Includes 24 pallets and MTS-Chuck S-P/A clamping device. This 5-axis HERMLE C 600-U + EROWA Robot easy automation was manufactured in 2001. It features a 24-position magazine, extended X-axis of 2010 mm, C-axis rotary table, spindle speed up to 15,000 rpm, and a 30 tool capacity. Includes a chip conveyor and a 200-liter coolant tank. If you are looking to get high-quality automation capabilities consider the HERMLE C 600-U machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2001, Hermle C 800 U optionally with automation, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 800/600/500 mm, 2-axis NC swiveling rotary table Spreitzer 3-way, tool magazine with 87 stations, HSK 63 interface, laser tool breakage detection, 3D touch probe Renishaw, interface for automation, automatic door, oil mist extraction. OPTIONAL WITH AUTOMATION: 3-axis robot, System 3R SWE, year of manufacture 2014, magazine with 60 pallets, 23 pallets, zero-point clamping system 3R Macro, System 3R Macro with 40 centric clamps Spreitzer MZQ 110 - 60 PA. Nlodpfx Ajxlq T Asgzsh

Condition: used, Year of construction: 1999, Technical details: x-travel: 600 mm Nedpst Rmffofx Agzolh y-travel: 450 mm z-travel: 450 mm total power requirement: 35 kW weight of the machine ca.: 6,5 t table-size: 600 x 370 mm tool taper: ISO 40 tool diameter: 80 mm tool length - max.: 250 mm no. of tools in magazin: 30 speeds: 12.000 U/min feed power: 6000 N kp power capacity: 9,0 kW 5-Axis CNC Milling Machine Spindle: 15113h *

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231358, Heidenhain iTNC 530 Control Program Run ON: 49,000 hours Spindle ON hours: 42,300 Axes in movement: 45,000 X travel: 850 mm / automatic: 650 mm Y travel: 700 mm / without tool change, automatic: 600 mm Z travel: 500 mm / automatic: 500 mm Main Spindle: Max. speed: 18,000 rpm Internal coolant supply (IKZ) External coolant supply (AKZ) Main spindle drive power: 19 kW Tool holder: SK 40 Swiveling Rotary Table: Table diameter: 280 mm Swivel range A: -30° / +115° Rotational axis C: 360° Max. table load: approx. 1,000 kg Speed A: 25 rpm / C: 65 rpm Tool Changer: Number of tool stations: 32 Number of magazine positions: 88 Nlsdoxiwhuspfx Agzoh Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent station: 125 mm Max. tool length: 300 mm Max. tool weight: 8.0 kg Feed Rates: Rapid traverse (X / Y / Z): 45 m/min Measuring system resolution: 0.0001 mm Total connected load: 41 kVA Machine weight: approx. 9.5 t Accessories: Complete documentation Chip conveyor Coolant unit Internal coolant supply Hydraulic unit NC swiveling rotary table Tool changer 2 x 80 positions Electronic handwheel Renishaw probe The machine can be inspected under power by appointment. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: reconditioned (used), Year of construction: 2016, CNC Vertical Machining Center HERMLE C 400 U With Heidenhain TNC 640 CNC Control Year of manufacture: 09/2016 Travel distances: X 850 Y 700 Z 500 mm Spindle speed range: 20 – 18,000 rpm, stepless Including the following accessories: - NC rotary swivel table Ø 650 mm x 540 mm (T-slots for SRT) - Vertical tool changer with 38 magazine slots (HSK 63) - Additional magazine with 50 magazine positions (ZM 50) - Through-spindle coolant supply 40 bar with paper band filter - Scale air purging - Fine filter for through-spindle coolant supply 40 bar - Scraper belt conveyor - Chip cart 450 liters - Coolant unit - Air blow-off unit - Spindle center compressed air - Manual cabin door, manual cabin roof - Polycarbonate safety windows - Electronic thermal compensation - Electronic handwheel - BLUM tool breakage/control & measurement A2 - Heidenhain 3D touch probe - Chip rinsing pistol - Oil mist extraction unit - Control cabinet cooling device (RITTAL) Nsdpsw Ewmfefx Agzelh - 4 adjustable machine feet - Operating manuals

Condition: good (used), Year of construction: 2004, operating hours: 109,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor Njdoxcp Slepfx Agzslh - Handheld control unit - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: ready for operation (used), Year of construction: 2009, Control Unit Brand SIEMENS Model 840D Main Drive Nsdpfexgkbvjx Agzslh Number of axis 5 Tools Number of index 38 Type of tool holder HSK-A 63 Additional Equipment Cooling: Internal cooling 40-80 bar This 5-axis Hermle C 40 U was manufactured in 2009. A universal machining centre designed for precision and versatility in complex machining tasks. Ideal for those seeking advanced milling capabilities. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 740 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, The machine is in good technical condition; inspection under power is possible by arrangement. Video available. Technical specifications: Working table length: 900 mm Working table width: 500 mm Maximum table load: 500 kg Spindle drive power: 32 kW Number of tools in magazine: 28 pcs Maximum spindle speed: 12,000 rpm X-axis travel: 740 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Machine height: 2,400 mm Machine width: 2,500 mm Weight: 7.3 t Nljdjxp R H Dspfx Agzeh

Condition: used, Year of construction: 2013, x-travel 650 mm y-travel 600 mm z-travel 500 mm Control iTNC 530 Heidenhain turning speeds 18.000 U/min power capacity - main spindel 10 / 15 kW tool taper HSK A 63 rotary table dia. 630 mm center bore 32 H7 Swivel range A: ° rotatable C: 360 ° max. table load 1.000 kg number of toolpositions 32 pos. tool taper HSK A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8.500 N total power requirement 43 kVA weight of the machine ca. 9,5 t dimensions of the machine ca. 15 x 7,5 x 3,5 m Nsdpfouyl Tbox Agzolh 5 Axis - CNC Machining Center Universal HERMLE - C 30 U Linear axes dynamic version 6-fold rotary union Blown air through the center of the spindle Automatic cabin door Rotating transparent window - incl. 32x HSK 63 holders - incl. 10x collets Also available as a production cell (2x Hermle C 30 U + Kuka Automation)

Condition: good (used), Year of construction: 2004, operating hours: 77,711 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Heidenhain iTNC530, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Nlodsxcp R Ijpfx Agzoh Siemens 840D Machine ON: 77,711 h | Spindle ON: 16,294 h - Spindle HSK-A63, 10,000 rpm - 32 tool positions - Rotary table SRT 280 mm with integrated clamping system SK50 (can be closed off if not needed or converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool positions plus 87 additional positions (ZM87) - Thermal compensation - BLUM tool measurement (probe on machine column) - Renishaw measuring probe - Chip container - Status beacon The machine has been thoroughly inspected; a geometry protocol and circularity test measurements are available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: used, Year of construction: 2013, x-travel 450 mm y-travel 600 mm z-travel 330 mm control iTNC 530 HSCI Heidenhain Main spindle: turning speeds max. 18.000 min/-1 power capacity - main spindel 31 / 17 kW max. Torque 98 / 54 Nm tool taper HSK A63 swiveling-rotary-table: rotary table dia. 320 mm Swivel range A: +/- 135 ° rotatable C: 360 ° max. table load 300 kg Number of revolutions A: 25 / C: 40 rpm T-slots 4x 14H7 Tool-Presetter: number of toolpositions 55 pos. tool taper HSK A63 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 8,0 kg max. total weight 220 kg change-time chip to chip 4,5 sec feeds: Accelaration 8 m/sec² Feed force 4,5 kN rapid traverse ( X / Y / Z ) 30 m/min total power requirement 40 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 6,5 x 6,5 x 3,5 m 5 Axis - CNC Machining Center Universal HERMLE - C 22 U - Good condition! - Linear axes XYZ and drives renewed - new spindle Q1/2024 Nlodot Syf Uopfx Agzjh - Optional: Internal coolant supply retrofitting possible (by Hermle, for an additional charge) - Additional container with paper belt filter incl. level monitoring - Conversion of coolant lubricant tank (lifting pump incl. level monitoring)