Used Ovens for sale (252)

Year of construction: 2023, Condition: new, Functionality: fully functional, operating temperature: 1,500 °C, COMPLETE SYSTEM INCLUDING: (2) NEL C30 Hydrogen Generators On Site Gas System N-500 TGN Nitrogen Generator 110 MoLa Carrier Tray Sets RO/DI Water System Cgebstxbuxjvq Rqnjt Bus Rail TRAY SIZE: 330 mm W x 330 mm L LOADING HEIGHT: 300 mm H CAPACITY IN 316L CYCLE: 8-10 Trays/hr NUMBER OF REST DEBINDING ZONES: 10 x 20 kW Top/Bottom Control NUMBER OF SINTERING ZONES: 10 x 30 kW SEGMENTS OF COOLING ZONE: 2 x 3m, 1 x 2m +Belt Drive and Return MAXIMUM TEMPERATURE REST DEBINDING: 800 C MAXIMUM SINTERING TEMPERATURE: 1,500 C PROCESS GAS CONSUMPTION (H2): 30-50 m3/h PURGE LOCK NITROGEN GAS CONSUMPTION: 34 m3/h POWER CONSUMPTION: 70kWh COOLING WATER CONSUMPTION: 3 m3/h POWER: 3 x 480V / 60Hz INSTALLED POWER: 500 kW IDLE MODE NITROGEN GAS CONSUMTPION: 15-16 m3/h IDLE MODE HYDROGEN GAS CONSUMPTION: 1-1.5 m3/h

Condition: good (used), Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace Cjbvewg Rv Aeq Rqnsgt -Manufacturer: Nabertherm, hardening furnace type M110 -Program control: ROD Type SE-402 -Usable space: 200/320/H150 mm -Heating power: 2.9 kW -Nominal temperature: 1100°C -Individual components: see photos -Dimensions: 740/580/H755 mm -Weight: 78 kg

Condition: used, Chamber kiln has the following dimensions: Csbvq Rqowgkqaonjgt Length 2800 Depth 1800 Height 3000 Max. 500° Fully functional

Condition: good (used), Functionality: fully functional, Temperature max: 300° Celcius Inner size LxWxH: 2.000 x 2.000 x 2.000 mm Heating: Hot Air Circulation Cjbvq Rewc R Idoqnsgt Power: 75 kW County of origin: Germany Outside dimensions LxBxH: 350 x 330 x 220 cm Weight: 2.000 kg

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 11434, Used TRUS/S recirculating air oven Manufacturer Keller, Ihne & Tesch Little used, very good condition 2 chambers each 800 x 1,600 x 1,600 mm (W x D x H) Operating temperature: up to 70°C Heating output: 18 kW Cgjbvq Rqowdkknjnot Recirculating air fans: 4 x 1.1 kW Air flow: horizontal Dryer consisting of two separately controllable chambers, arranged side by side Four-channel temperature control with four electronic overtemperature protection controllers Six-channel graphic recorder for interior temperature and product temperature (handheld sensor) documents the drying process Power switching: solid-state relay Ventilated panels on the interior side wall for subsequent optimization of temperature tolerance 60 mm insulation reduces heat loss The oven originates from a company liquidation and is immediately available from the Merenberg warehouse.

Condition: used, Year of construction: 2022, Manufacturer : France étuves Cgobvq Rqowchdconot Model : XXL12 Year : 2022 Power : 53,3 KVA Max. temperature : 300°C Inside dimensions : 2000 x 3000 x 2000 mm Outside dimensions : 2559 x 3576 x 2798 mm Power supply : 400V ~3P 50Hz 80A Variable speed control for inside ventilation Viewing window on door Temperature cycle programmer Air extractor

Condition: good (used), 1 x Winward Engineering Low Level Depositor Model: Magnum Located in Melksham, Wiltshire Cgobvq Rjwfta Ioqnjt

Year of construction: 1988, Condition: good (used), Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace -Manufacturer: Nabertherm, hardening furnace type N60/H -Program control: STANGE type SE-402 -Usable space: 400/420/H390 mm -Heating power: 10 kW -Nominal temperature: 1340°C Cebvq Rsvrivasqnsgt -Individual components: see photos -Transport dimensions: 950/1070/H860 mm -Weight: 290 kg

Year of construction: 2001, Condition: used, Functionality: fully functional, Industrie- & Anlagenbau - Bad Königshofen Continuous plant / Hardening furnace → Consisting of the process stages: Hardening, post-treatment and temperingYear of construction: 2001General: 2001-2023 production-accompanying exchange of wear ilability over the year 90Control system: S5Current plant technology: Pusher-type furnace (made of cast steel)Output during quenching and tempering max. 300 kg/h Output during carbonitriding max. 100 kg /hThe plant consists of the 7 main components: Continuous annealing furnace, quenching bath, oil storage tank, de-oiling and washing station; manipulator, continuous tempering furnace, control cabinet / ctionality of the continuous annealing line: - the plant is capable of quenching and tempering and carbonitriding on oil bath basis- process temperatures up to 930°C- Base or safety gas: (for O2 closure) nitrogen/methanol (as carbon donor) is used- process gas: natural gas or ammonia but convertible to propane- the curing area is heated with natural gas- the tempering furnace is powered by electricity- the round wire link belt has a width of 765mm (1.4864 Nb)1. continuous annealing furnace: - Model: DOBGS 7.5 1 50-10-0 (intermittently conveying, protective gas-tight outer shell, indirectly heated with recu - radiant tube burners.- Outer dimensions: Continuous furnace L x W x H = 7.85 x 2.10 x 2.25 m → annealing zone length 5.0 m; conveyor belt width: 765 mm.- Temperature: max. 980 °C +/- 5 K- Total heating power: 210 kW - by means of 14 Noxmat - steel tube burners manufacturer ALD with a radiant tube diameter of 150 mm.- temperature control zones: 3 heating and control zones (i.e. zone1 - 6 x 15 = 90 kW; zone2 - 4 x 15 = 60 kW; zone3 - 4 x 15 = 60 kW)- Protective gas supply / control: 3 x each nitrogen, methanol, natural gas, ammonia air- Throughput speed: adjustable via frequency converter 2 to 7 m/h- Furnace time: approx. 75 min at 4m/h; adjustable from 38 to 135 min; holding time 50 min at 4m /h- Transport equipment: Round wire link belt made of 1.4864 with 18 mm lamellar edge- Inert gas consumption: inert gas: nitrogen approx. 3 m3/h; methanol 3 l/h, natural gas 500-2000 l/h, ammonia 200-300 l/h, air 500 l/h- Lining: is lined with fireclay, ceiling with thermal insulation wool, condition: in need of repair- Electrical connected load approx. 10 kW - Total weight approx. 15.800 kg2. quenching bath model KAB 11,1: - suitable for quenching with oil- Structure: electrically driven circular conveyor, level difference detector, lifting platform, basket turning device, bath heating, bath circulation, water cooling and draining station.- External dimensions: L x W x H = 2.80 x 2.50 x 2.00 [m]; drop height in quenching oil = 1.0 [m]. - Total weight with oil: approx. 16,000 [kg].- Connected load heating: 48 kW- oil cooler HK4 - make Hering 2 x 2,2 kW- incl. level - difference detector model NDM 100-03. oil reservoir model B12,5: - Suitable for holding the oil from the quenching bath with pump and support frame for centrifuge system.- External dimensions: L x W x H = 4.20 x 2.50 x 1.55 m; max. filling height 1.40 m; max. volume 12.88 m34. de-oiling and washing station: - consisting of 1x centrifuge AZ 500 manufacturer WMV, 1 x washing machine WA 500, 1 x centrifuge AZ 500 H for drying. - 8 cylindrical transport containers according to drawing 300 /864 /96 - drum height 500mm- connected load: ca 15 kW5. manipulator model MBM 63/1 - (500): - consisting of a mechanical cross s Cgobvq Rjp Ecn Aeqnot

Year of construction: 2017, Condition: used, controller manufacturer: SIEMENS, controller model: S7-1500, pipe diameter: 50 mm, pipe length: 1,200 mm, wall thickness: 6 mm, CONTROLS .. PLC SIEMENS S7-1500 FEEDSTOCK TUBE .. external diameter min.: 15 mm .. external diameter max.: 50 mm .. wall thickness min.: 1.8 mm .. wall thickness max.: 6 mm .. length min.: 200 mm .. lenght max.: 1200 mm Cebvq Rqeurckgenegt System consists of: + ITG ITPA 100k150 vertical induction hardening system, YoM 2017 150 kW, 100 kHz + BACHMANN automation cell, YoM 2017 + 2x ABB IRB 4600 handling robots, YoM 2017 load capacity 60 kg, additional arm load 20 kg, reach 2.05 m

Year of construction: 2018, Condition: reconditioned (used), With warranty, electrically overhauled, condition checked -Max. temperature: 1400 °C -Furnace chamber volume: 120 liters -Interior 500 x 500 x 500 mm (W x D x H) Cgebvswf Ewxsq Rqnot -Exterior 890 x 1180 x 1470 mm (W x D x H) -C440 controller, 10 programs with 20 segments each -Electrically driven flaps -Intake air fan -Including exhaust hood -Visualization via logos (network connection, evaluations) -Dependent weight 370 kg -Documentation Visit to our warehouse upon request. Furnaces, annealing furnaces, industrial furnaces, chamber furnaces, firing furnaces, curing furnaces, tempering furnaces, laboratory furnaces

Year of construction: 2000, Condition: used, Technical details: pass through height: 730 mm Cgobovrzwievq Rqnst width: 750 mm depth: 875 mm degree: max. 450 °C voltage: 400 V work height max.: ca. 850 mm total power requirement: 18 kW Total weight, approx.: 436 kg dimension machine xH: 1,55 x 1,2 x 1,8 mm 4 shelves with supports can be placed in the heating chamber. This electric stove currently has 1x shelf in the interior. The door (size 930 x 880 x 60 mm) is lined with fireclay. Operation from the side via electronic control panel. A motor-driven fan is installed at the rear for cooling. The stove stands on a welded base frame made of sectional steel. *

Year of construction: 1985, Condition: used, Hardening furnace Heraeus Type KM 260 Cgobvsgtxuqjq Rqnjt width 250 mm height 150 mm depth 500 mm Temperature up to 1150 c

Year of construction: 1989, Condition: good (used), Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace -Manufacturer: Nabertherm, hardening furnace type N300/S -Program control: STANGE type SE-402 -Usable space: 560/715/H790 mm -Heating output: 18 kW Cgsbvq Rqjvivvnenot -Nominal temperature: 1280°C -Individual components: see photos -Transport dimensions: 1200/1350/H1930 mm -Weight: 604 kg

Year of construction: 2012, operating hours: 75 h, Condition: like new (used), This Vötsch Hephaistos Industrial Microwave Chamber has had extremely low hours usage during its life so far, on 75 hours .. having been installed and minimally utilized from time to time for a single research project at the University of Sheffield AMRC research department known as the “Factory of the Future”. Sold new for a price of approx 250,000.00Euro. Contact us now for an exceptional offer for this high tech unit in as new condition. VHM Hephaistos Industrial Microwave Chamber For Aerospace and Automotive Engineering The Research Project The VHM Hephaistos Industrial Microwave Chamber for component testing was developed in cooperation with the Karlsruhe Institute of Technology (KIT). It is the result of a joint development project sponsored by the German Federal Ministry of Education and Research (BMBF). Alongside KIT, the Composite Research Center of EADS in Munich, the Institute for Aircraft Design (IFB) at the University of Stuttgart, GNK Aerospace in Munich and Vötsch Industrietechnik were involved in the project. Microwave system The VHM Hephaistos Industrial Microwave Chamber from Vötschtechnik is an internationally patented system. Fast and energy-efficient production processes are possible by using microwaves. The microwave chamber is characterized by its hexagonal geometry with a very high field homogeneity. This is a major advantage when thermoforming fibre composites (CFRPs) in the aerospace and automotive industries. During the targeted volumetric heating of the products, the microwaves directly enter the material so that energy is delivered directly and the chamber does not require heating. This increases the heating rate and throughput, saving energy and time in addition. Cobvq Rqetvz Rfenogt Reduced production costs This industrial microwave chamber guarantees you reduced costs due to shorter heating, process and cooling times required for curing CFRP components. Its material processing technology means the microwave can produce energy input into the component to be heated while the oven itself remains cold. In comparison to the process in autoclaves, the processing times are reduced by up to 50 %. Energy consumptions is reduced by up to 70%. Advantages: Possibility to use metal parts, such as conventional metal tools and feed systems, in the microwave field High degree of product quality thanks to the maximum homogeneity of the microwave fields provided by the hexagonal chamber structure. By using microwave absorbing materials, additional positive effects can be achieved Sizes from laboratory scale to large systems, e.g. as are required in the aerospace industry, can be achieved The modular design allows a flexible adjustment to your product Volumetric and selective heating for energy-efficient processes Precise heating of the products Hybrid systems, e.g. in combination with hot air

Year of construction: 2017, Condition: good (used), Endogas generator (endothermic protective or reaction gas) Generation capacity 24 - 60 m3/h H2/CO/N2 mixture Cgebvqov Nakis Rqnot Operating temperature 1000 °C Regeneration temperature 870 °C Electrical heating Gas consumption (input) Natural gas 13.8 m3/h Propane 9.6 kg/h Nitrogen 2 m3/h Electrical connection 27 kVA IPSEN EndoSave control system

Year of construction: 2007, Condition: used, EFD INDUCTION BJ.2007 Cgjbvjwd Rvwjq Rqnet

Year of construction: 2018, Condition: ready for operation (used), A rail hardening furnace for the production of shears is available. Working length: 3400mm, heating zones: 2, heating power: 34kW, useful space separation: SiC plates, temperature-controlled zones: 2, conveying direction: free, machine dimensions X/Y/Z: approx. 4000mm/1250mm/2100mm. Including automatic conveyor system and separate blower. Documentation available. On-site inspection is possible. Cgsbvq Rowftcioqnot

Year of construction: 2025, Condition: as good as new (ex-display), Available for immediate delivery, new device with warranty -Temperature 250°C -Inside WxDxH 1500 x 3000 x 2000 mm -Outside WxDxH 2410 x 3560 x 2730 mm -Content 9000 liters -Control Eurotherm Nanodac, 100 programs with 25 segments each, another 100 programs can be saved/loaded via FTP or a USB memory stick -2 circulating air fans -Double doors with safety door sensors -Overtemperature protection, Eurotherm 3216i -Control/writer with color touch display -Sturdy steel construction outside in anthracite -Inlet and exhaust air nozzles with manual flaps, Cgobvqjlkb Ezs Rqnjt -Electric version 400 V / 50 Hz / 3NPE -Increased heating output approx. 70 kW -Recess for retraction a car -Documentation, CE declaration of conformity -Electrical circuit diagram with spare parts list As a new device also available with exhaust fan and other equipment! Delivery time approx. 10 - 12 weeks. Talk to us! We offer new and used industrial furnaces, which we also convert and add to according to customer requirements. Visits to our machine hall by appointment. Furnace, furnaces, drying furnace, industrial furnace, drying cabinet, heating furnace, heating cabinet, convection furnace, chamber furnace, heating furnace, chamber convection furnace, tempering furnace, tempering furnace

Condition: good (used), Drying oven, drying cabinet, electrode re-drying, electrode cabinet, electrode dryer -Manufacturer: Meyer, drying oven type ES 2 -Power: 0.2 kW -max temperature 110 °C -Voltage: 110 V -Usable space: Ø 100 x 430 mm / 2 packages of electrodes Cebvq Rqewbdilsnogt -Number: 18x dryers available -Price: per piece -Dimensions: 170/170/H565 mm -Weight: 7.8 kg/piece

Condition: used, TECHNICAL DETAILS Cgebveug U Tzoq Rqnst - Max. temperature : 950 [°C] - Max. inlet height : 10 [mm] - Heating distance : 1600 [mm] - Cooling length : 2600 [mm] - Conveyor belt speed : 0.4 - 3.2 [m/min] - Conveyor belt width : 150 [mm] - Nominal voltage : 400 [V] EQUIPMENT - External cooling unit

Year of construction: 2023, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 441370, External dimensions 1: 1268x1935x1960 mm Furnace chamber: 750x1000x750 mm Usable chamber 2: 600x800x600 mm Furnace chamber volume: approx. 500 l Loading height: 900 mm Weight: 1150 kg Tmax: 850°C Temperature operating range: 150°C to 850°C Temperature uniformity: +/- 5°C according to DIN 17052-1 in an empty chamber Cgebvqowd N A Ns Rqnet Heating and cooling times (without load): Heating time: approx. 3 hours to Tmax Cooling time with closed furnace: approx. 20-30 hours from Tmax to 150°C Permissible batch weight: 500 kg with evenly distributed load Max. batch weight per rack: 125 kg Power rating: approx. 28.5 - 31.5 - 34 kW (depending on supply voltage) Heating output: approx. 27 - 30 - 32.5 kW (depending on supply voltage) Fan output: approx. 900 m³/h Supply voltage: 380-400-415 V 3/PE 50 Hz, protection without residual current device

Condition: good (used), Drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet, universal oven Csbewbc U Hevq Rqnjgt -Manufacturer: Heraeus, drying cabinet universal oven type T 6120 with viewing window -Useful space: BTH 550/370/495 mm / 100 liters -Heating power: 2.2 kW -Nominal temperature: 300°C -Voltage: 230 V -Individual components: digital temperature controller, adjustable ventilation flap -Dimensions: 940/585/H720 mm -Weight: 72 kg

Condition: good (used), Drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet, universal oven Cgsbvqewbc Ruo Rqnjt -Manufacturer: Memmert, drying oven universal oven type UM 200 -Useful space: BTH 400/250/320 mm / 32 liters -Heating power: 1.1 kW -Rated temperature: 30°C to 220°C -Dimensions: 550/435/H600 mm -Weight: 28 kg

Condition: good (used), Drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet, universal oven -Manufacturer: Memmert, drying oven universal oven type ULP 800 on castors -Useful space: BTH 1040/600/1200 mm / 749 liters Csbvq Rewayuujqnegt -Heating output: 4.8 kW -Rated temperature: 30°C to 220°C -Individual components: see photos -Dimensions: 1190/790/H1620 mm -Weight: 170 kg