Used Furnace Cars for sale (5,307)

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. Itjdpfx Acjq Nyzbjuon 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C ° Itedpfxsd Sm Die Acusn

Year of construction: 2017, condition: used, controller manufacturer: SIEMENS, heating capacity: 43 kW (58.46 HP), temperature: 1,200 °C, CONTROLS .. SIEMENS CHARACTERISTICS HEAT TREATMENT EQUIPMENT .. operation modus: continuous .. Heating capacity: 43 kW .. temperature max.: 1200 °C HEAT TREATMENT COMPARTMENT / ZONE .. heat treatment process: annealing .. heat treatment medium: inert gas .. length: 3250 mm .. width: 450 mm .. Height: 30 mm ELECTRICAL SPECIFICATIONS .. mains frequency: 50 Hz Continuous furnace with gas treatment Type of treatment: Annealing and hardening under protective gas Performance data: Belt load 5 kg/m Working temperature 1050 C° Consumption values: Electrical heating power 43 kW Protective gas consumption 6 m³/h N₂ Forming gas 12 m³/h H₂/N₂ Cooling water delta T15° 2 m³/h Continuous furnace Conveyor width 450 mm Clear height above belt 30 mm Furnace usable length heated 3250 mm Upper limit temperature 1150 C° Working temperature 1050 C° Electrical heating power 96 kW Conveyor belt control range 0-600 mm/min System length 15000 mm System width 1700 mm Furnace height 1900 mm Itodpfx Acoxpt E Nsujn Weight 6500 kg Translated with (free version)

Condition: good (used), mileage: 406,235 km, power: 207 kW (281.44 HP), first registration: 02/2020, fuel type: diesel, color: yellow, axle configuration: 4x2, tire size: 245/70R19,5, fuel: diesel, wheelbase: 5,180 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, traction control, trailer coupling, = Additional Options and Equipment = - Digital tachograph - Electric windows - Electric mirrors - Tachograph (control unit) - Hydraulic system - Short cab - PTO (power take-off) - Pump - Winch = Remarks = Number of axles: 2, Configuration: 4x2, Twin tires, Payload: 5,530 kg, Kerb weight: 6,460 kg, Gross weight: 11,990 kg, Total fuel tank capacity: 250 liters, Tow hitch, Unbraked trailer load: 750 kg, Center axle trailer load, braked: 5,729 kg, Kingpin diameter: 40 DIN, Winch, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/Cassette, Color: Yellow, Heated mirrors, Rear-view camera, Lighting type: Halogen lamp, Lane departure warning system, Engine power: 207 kW (278 Hp), Fuel: Diesel, Euro: 6, Transmission type: Automatic, Gearbox type: ZF, Gears: 12, Power steering, ABS, ASR, Hydraulic system, PTO, PTO type: 1, Starter battery, Pump, Number of seats: 2, Seating arrangement: 1+1, Upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: ZF, 12 gears, automatic Axle Configuration Tyre size: 245/70R19.5 Brakes: Disc brakes Axle 1: Steered; Tyre tread left: 10 mm; Tyre tread right: 10 mm; Suspension: Leaf spring Axle 2: Twin tires; Tyre tread left inner: 8 mm; Tyre tread left outer: 5 mm; Tyre tread right inner: 6 mm; Tyre tread right outer: 5 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 955 x 255 x 331 cm Weights Unladen weight: 6,460 kg Payload: 5,530 kg Gross vehicle weight: 11,990 kg Functional Pump: Yes Interior Number of seats: 2 Condition Technical condition: Good Itsdpfxsxmrqre Acusn Visual condition: Good Damages: Damaged vehicle (not operational) Number of keys: 2 Financial Information Leasing price: €868 per month (default, 60 months); Please inquire for more information and conditions Identification Registration: 78-BPH-9 = Company Information = Kleyn Trucks is one of the world’s largest independent traders of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands of various years and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Proper business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) registration numbers are arranged quickly • Skilled technical services • The assurance of “recognizable quality” • And more.... Please visit our website for special offers and the complete stock list. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace - As good as new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts incl. TECHNICAL DATA Isdpfx Acoiryyaeujtn Plant type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Control voltage: 230 VAC / 24 VDC Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Installation area: 900 x 1900 x 3000 mm Total plant weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Itjdpfxjxpuahs Acuen Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

Condition: used, max. temperature 1150 Grad voltage 380 Volt total power requirement 5.0 kW Dimensions - Inside - B x H x T 220 x 220 x 350 mm weight 50.0 kg from a vocational school (!!) Heraeus is one of the leading manufacturers of furnaces for heat treatment in Ijdpjxg R Ivefx Acuetn Laboratories, craft and industry. Solidly constructed, high-quality components. Especially for material testing or heat treatment of welded or additively constructed construction parts, tempering, annealing etc. Furnishing: - HERAEUS hardening / chamber / annealing furnace - for heat treatment of metal - Infinitely adjustable temperature - for workshop use - front - hinged door - front degree indicator - timer

Condition: good (used), Basket LxWxD 300 x 210 x 460 mm 150-500 Degrees Itodpfx Ajhz D Iwocujn MARCELS MASCHINEN AG

Year of construction: 2010, condition: excellent (used), controller manufacturer: SIEMENS, controller model: S7-1500, overall weight: 60,000 kg, total height: 6,600 mm, space requirement length: 15,000 mm, space requirement width: 6,300 mm, temperature: 250 °C, year of last overhaul: 2021, CONTROLS .. electronic controls SIEMENS S7-1500 CHARACTERISTICS HEAT TREATMENT EQUIPMENT .. temperature max.: 250 °C HEAT TREATMENT COMPARTMENT / ZONE .. heat treatment process: tempering .. heat treatment medium: water .. temperature max.: 250 °C .. length: 8000 mm .. width: 4300 mm .. diameter: 4300 mm DIMENSIONS / WEIGHTS .. space requirements -left/right-: 15000 mm .. space requirements -front/back-: 6300 mm .. total height: 6600 mm .. height above floor level: 5500 mm .. height under floor level: 1100 mm .. total weight approx.: 60000 kg ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz Electrically upgraded in 2021 (Siemens). - Has an aviation and aerospace certification. - Complete documentation of all calibrations - Monitoring system for temperature and pressure zones Operating temperature: 250 °C Operating pressure: 12.5 bar Operating hours: - Vacuum pump: 9,132 h Itjdoxnwbfjpfx Acuon - Fan: 15,497 h

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Itjdpfx Acog R Sh Aouen Enclosure size: 2600 x 10300 x 3600mm Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Year of construction: 1984, condition: ready for operation (used), Two industrial shaft furnaces Nabertherm for heat treatment are available. 1) Nabertherm S430, year of manufacture: 1984, power: 54kW, max. temperature: 1200°C, usable volume: approx. 430l. 2) Nabertherm S300/SO, year of manufacture: 1977, power: 36kW, usable volume: approx. 300l. An on-site inspection is possible. Itsdpfexn S Ugjx Acuon

Condition: used, Temperature: 950°C Ijdpfx Acjxnzcgjustn Useable Dimensions (L x W x H): 5.000 x 2.600 x 1.100 mm

Year of construction: 2013, condition: used, max. temperature 1.100 Grad size of opening 250 x 170 mm depth of chamber 370 mm volume 15 L voltage 230 V total power requirement 3,6 kW weight of the machine ca. 40 kg dimensions of the machine ca. 0,48 x 0,65 x 0,57 m - Serial-No.: 271414 - control: NABERTHERM B180 Iodsxf I T Hspfx Acuetn

Condition: good (used), Internal dimensions 250 x 400 x 160 mm Temperature 1150° Iedpsvhazfofx Acuetn MARCELS MASCHINEN AG

Condition: excellent (used), Annealing furnace Make Naber Type 41 S 12 kw YEAR OF MANUFACTURE 1972 Dimensions of the annealing chamber : width 350 mm height 220 mm depth 500 mm Transport dimensions : Length 1350 mm Iedpfjrwfqnjx Acuotn Width 850 mm Height 1560 mm with pallet Weight 320 kg

Year of construction: 1985, condition: used, Hardening furnace Heraeus Type KM 260 width 250 mm height 150 mm depth 500 mm Itjdpfx Ajgtxuqecuen Temperature up to 1150 c

Condition: used, heavy gate clamping cars make Linck type VA help car vy Ijdpfx Acec Ulvbsuetn

Condition: good (used), Heraeus K 750/1 Tempering Furnace / Laboratory Furnace / Chamber Furnace For sale is a used K 750/1 tempering furnace from Heraeus. Technical Details: Manufacturer: Heraeus Model: K 750/1 Design: Tempering Furnace / Laboratory Furnace / Chamber Furnace Max. Temperature: 750 °C Itedpfxjxly A Ho Acusn Heating Output: 3.6 kW Voltage: 400 V (three-phase) Areas of Application: Laboratory, Industry, Workshop, Heat Treatment, Metalworking Condition: Used, Working Buy Heraeus K750/1 tempering furnaces and other items at affordable prices – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Condition: used, Vertical furnace, make Borel Possible processes: tempering, nitriding Dimensions: diameter 800 mm height 1.800 mm max. Temperature 600ᵒC Connected load 50 kW Isdpfxsxltd Re Acuotn Without lid and electrical cabinet.

Condition: good (used), Internal dimensions diametre x depth 430 x 630 mm Isdpjw Nnqujfx Acujtn Temperature 800° MARCELS MASCHINEN AG

Year of construction: 2018, condition: new, Double chamber furnace, make VEI-Engineering type: KA_GB 10.14.14/d max. temperature: 550°C Itsdpfx Aodyvipjcujn fan power: 2 x 4 kW heating: natural gas burners power: 2 x 100 kW useable dimensions per chamber width: 1.000 mm height: 1.400 mm depth: 1.400 mm

Year of construction: 2019, condition: new, useable dimensions (bogie hearth): depth: 4.000 mm width: 3.500 mm height: 1.500 mm max. temperature: 1200 °C working temperature: 980 °C heating power: 810 kW divided between 6 burners à 135 kW drive systems bogie hearth: 2 x 0,75 kW number of control groups: 3 PLC: Siemens S7 Please note that we make the furnaces according to customer requirements Iodpfx Aod Nf Smecuotn (e.g., dimensions, temperature, type of heating).

Year of construction: 2018, condition: new, High temperature chamber furnace, make VEI Iedpfx Asdyvkyocuotn max. temperature: 1.200°C useable dimensions (w x h x d): 2750 x 500 x 1.100 mm heating power: electrically, 42 kW

Year of construction: 2016, condition: new, # suitable for treatment under inert gas # with rapid cooling by fan external dimensions (w x h x d): 1500 x 1600 x 2500 mm useable dimensions (w x h x d): 750 x 600 x 1100 mm temperature: 1200°C electrical heated: approx.. 42 kW Itodpscdi R Eefx Acuen charge weight: 700 kg

Year of construction: 2021, condition: new, temperature: max. 650°C heating power: 45 kW fan: 3,0 kW Itodpsgyn H Nefx Acujn total connected load: approx. 52 kVA internal dimensions (l x w x h): 1.000 x 700 x 700 mm charge weight: max. 1,0 t