Used Temper for sale (6,563)

Condition: good (used), see documents Lajdpfsgz Afyjx Agzsk

Condition: excellent (used), CTS Type: T-40/600 Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numeric input for set values - Error messages in plain text - RS 232 interface - Free switching channels for user-specific test item control Technical Specifications Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Lsdox E Tq Tjpfx Agzoak Approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, no radiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions (H x W x D): approx. 850 mm x 850 mm x 830 mm External dimensions (H x W x D): approx. 1900 mm x 1120 mm x 1875 mm Operating Data: Power connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 7.1 kW Rated current: 12.3 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 For your safety as a buyer, please note the following procedures are performed on all chambers offered: 1. Functional inspection and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of supply: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2017, Stainless steel jacketed tank Mixer with variable speed control Lajdpfjx Dnk Njx Agzek Temperature tank sensor Capacity 300 ltr Mobile on castors

Condition: excellent (used), Viessmann Paromat Triplex 460 kW low-temperature boiler, suitable for use with oil or gas burner. Lajdpfox Htifsx Agzsk

Condition: used, This listing is for the LEEC P33 Mk 11 Proportional Temperature Controller The unit is in full working condition and is ready for immediate use LEEC P33 Mk 11 Proportional Temperature Controller (Precision Incubator) This unit is a microprocessor-based PID (Proportional‑Integral‑Derivative) temperature controller, designed to deliver exceptionally stable temperature regulation within the LEEC P33 Precision Incubator. Key Features & Performance Highly Accurate Regulation: Maintains temperature within ±0.1 °C at 37 °C—ideal for sensitive biological and laboratory applications. Dual Temperature Display: Clearly shows both the user-set "target" and the current "actual" temperature on a digital LED display, with indicators for when heating is active. Proportional (PID) Control: Employs PID control through low-wattage heating elements profiled to avoid hot spots. This ensures smooth transitions and precise thermal stability. Fast Recovery & Uniformity: Recovery Time: Approximately 6 minutes to return to set temperature after door opening. Uniformity: Achieves ±1.0 °C variation across the chamber. Fan-Assisted Circulation: Twin fans create gentle, full-width airflow; fans automatically shut off when the door opens to reduce heat loss. Safety Cut-Out: A digitally adjustable over-temperature safety cut-out prevents accidental overheating; visual indicators and alarms streamline monitoring. Context: P33 Precision Incubator Specifications Lsdpfxoxhfi Re Agzjak Temperature Range: From at least 5 °C above ambient up to +60 °C. Capacity & Construction: Chamber Volume: 730 litres, built from stainless steel. Dimensions: External—1550 × 1270 × 660 mm; Internal—1275 × 1140 × 490 mm. Weight: 225 kg. Mobility: Castor wheels are included—lockable for stability. Power: 600 W rating for heating operation. Optional Accessories: Additional shelves (L3) Internal power point (PP) External cooling unit required for operation near or below ambient temperature (e.g., LEEC recirculating cooler) Summary The LEEC P33 Mk 11 proportional (PID) temperature controller offers precise, stable, and responsive control—maintaining ±0.1 °C at 37 °C with fast recovery and uniform temperature distribution. It features handy dual displays, safety cut-outs, and is complemented by a robust chamber design. Perfectly suited for high-demand laboratory and incubation applications.

Condition: excellent (used), functionality: fully functional, Line of Quenching and Tempering Furnaces Bought new in Asia rebuilt with German technology Dephosphating washing machine Automatic weighing to dose the load Lsdpjt Ty Sdefx Agzeak Software with batch traceability management New thermal insulation on top, bottom and walls New refractory stainless steel mesh belt New Ceramic Recuperative Burners from IBS General retrofitting for electrical panels and automation Mainly is used to quenching and tempering, fasteners, nuts and special parts for automotive industry Class 8.8, 10.9 and 12.9 Capacity: 1.000 kg/hour Possibility to load, transport and install the line at your facilities Price to be agreed

Condition: excellent (used), Type: Weiss WT3-340/70 Very good condition Weiss temperature cabinet with S!MCON / 32 control, air-cooled (refrigerant (R-404A) (can be converted to R452A on request) Test room capacity: approx. 335 liters Test room dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Data for operation: Test room lighting halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Nominal current: 12.5 A Nominal power 4.1 kW Fuse provided by customer 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 58 dB(A) Data for temperature tests: Temperature range: -72 to +180 °C Temperature deviation over time in the middle of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating: 3.0 K/min Cooling: 3.0 K/min Lasdpfev Edd Ssx Agzok Heat compensation max. 1500 W Refrigerant: R-404A / R-23 Weight: 585 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run with calibrated measuring devices. Condition: used / used Very good condition

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm Ljdpfx Agsg Ewwrezjak -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. 4 for sale. 1 piece/300 EUR. Good working condition. Please check out our other listings as well. Laedpfjwf Anhex Agzsk

Condition: excellent (used), Viessmann Vitoplex 350 kW low-temperature heating boiler. Can be used with oil or gas burner. Available as heating container or heating trailer. Complete system also possible as an emergency heating unit. Lsdpfx Ajx A Ipcsgzjak

Condition: excellent (used), Viessmann Vitoplex 300/720 kW/low-temperature/heating boiler/available with oil or gas burner upon request Lasdexv Exbspfx Agzok

Condition: excellent (used), Viessmann Vitoplex 120 kW. Low-temperature boiler with oil or gas burner. 1.0-9.5 Lodpfsxgnx Ssx Agzoak

Condition: excellent (used), Viessmann Vitoplex 345 kW low-temperature boiler for oil or gas, model 03. Weight 1300 kg. Lajdpfxexgchbe Agzok

Condition: excellent (used), Year of construction: 2011, Buderus GE515 low-temperature 455 kW Lasdpfsw Ey Dajx Agzjk

Condition: excellent (used), Buderus G 605 low temperature boiler 1020 kW Ljdpfswynuiox Agzsak

Condition: excellent (used), Year of construction: 2007, Buderus SB735 low temperature boiler Lajdpfjnr Ek Ujx Agzsk Year: 2007 Output: 1200Kw Burner: Weishaupt oil or gas burner on request

Condition: excellent (used), Year of construction: 2004, Buderus GE315 i85 low temperature boiler Output: 140Kw Year: 2004 Lasdpfx Agsnr Elcozsk Burner: Weishaupt oil or gas burner on request Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Viessmann Vitoplex 270kw low-temperature boiler Ljdpfx Aswiqlcsgzsak

Condition: excellent (used), Buderus GE315/200kw low-temperature boiler with oil burner Lsdpfswauarox Agzeak

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Lodpfx Agewauaxjzoak

Condition: excellent (used), Viessmann Vitoplex 700kw.Bj.2012, low temperature boiler, burner for biogas possible ,oil burner possible,Weishaupt ,on request in sea container with all accessories parts,pumps,chimney,controls,pipes . Ledpfxjnqyxlo Agzjak

Condition: excellent (used), Low-temperature boiler Viessmann Vitoplex 300 with 500 kW output 6 bar 110°. Year 2012 Lodpfxjvzlkrj Agzeak

Condition: excellent (used), Buderus GE515 low temperature boiler 350kw. on request with Weishaupt oil or gas burner. Laodpfxjnr Ek Rs Agzok

Condition: excellent (used), Viessmann Vitoplex 200 440Kw Used Bi: 2007Typ:SX2A Power: 440Kw Viewing by appointment only! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. R2Ru7Mxt2V The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information Lsdsvilvdjpfx Agzoak

Condition: excellent (used), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum specimen weight: 20 kg Test chamber volume: 60 liters Test chamber internal dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply connections to the specimen SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg Lodpfxex Hglye Agzsak Important information for your safety as a buyer! The following points are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to change or error!) Should you have any further questions, we are happy to answer them by phone.