Used Temperature Controller for sale (47,147)

Condition: excellent (used), Wittmann Temperature Controller Here we offer a Wittmann temperature controller. Wittmann Temperature Controller DISCO 2 Singulus 3X415V 50/60Hz 16A 5kW Type: TR7B7D7D0X_09_00 Condition: used Iijdpozd Ruwsfx Abvec Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Autotherm Here we offer a 6-circuit temperature control unit. Without an active refrigeration unit! According to the enclosed technical brief: Temperature range: -40°C … +85°C (extended temperature range -40°C…+130°C) Increased heating capacity: 27 kW instead of 18 kW Includes 1 temperature control in the main circuit Iedpszd Rtysfx Abvjic Includes 6 temperature measurements in the respective supply line Includes 6 temperature measurements in the respective return line Includes 6 flow rate and pressure measurements in the respective supply line Includes 6 flow rate and pressure controls 1 l/min .. 12 l/min and 0.1 bar … 3 bar Includes changeover control Includes frequency inverter-controlled pump in the main circuit Includes 6x 3-way valve Includes 6 additional overflow valves, adjustable from 2 … 12 bar Pre-set to 2.4 bar Includes filling and emptying device For all circuits, common/simultaneous operation Includes 50l integrated tank Includes pneumatic emptying function Includes S7 control system Energy saving and increased cooling capacity: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range of +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C cold water network. The cooling capacity is 50 kW at a supply temperature of +20°C. This increases the cooling rate in this temperature range and saves energy due to the shorter running time of the refrigerant compressor. (The dimensions of the basic unit, according to the data sheet, are increased by approx. 0.3 m²) Assembly in a Rittal modular enclosure: 2x TS8 800x1000x2000 mm 1x additional, enclosed enclosure, min. 600x600x2000 mm (for control/electrical components) Supplied via on-site or optional cooling medium supply Supply temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h, continuously controlled For cooling capacity, a cooling medium must be connected! Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale from our location! Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here, we offer you a mytron temperature control system TS 1800. mytron temperature control system TS 1800 400V 3N, 50Hz, 3x35 AT Weight: approx. 920 kg Type: TS 1800 Condition: used Iisdpfxezdr Eds Abvoc Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, circulating medium 25 °C Cooling capacity 10 kW Rated power supply 5,45 kW Operating/control voltage 400-415/24 V / 50 Hz Rated current/max. fuse 15,2 / 25 A The temperature control units are, in our assessment, in good used condition. Iodpfx Aezbc Hbjbvoic The offer includes two units. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: KROt-96/a,re11 -Setting value: from 0 to 1200 °C -220 V 5 A Price: per piece -Quantity: 2 available Iodpfx Ajb A Sv Tebvjic -Weight: 0.6 kg

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: AC, Temperature control unit Thermo Quick Duo Temperature control unit for chocolate Iijdpfxjygda He Abvjc Model: Thermo-Quick Duo with 2 removable bowls Control via thermostat (70°C) Connection: 230 V Dimensions: 760 x 410 x 240 mm (W x D x H) Used equipment We have many other units in stock!

Condition: excellent (used), Several HB-Therm flow meters and water distributors available. Condition: like new – from cleanroom production. The following variants are available: * 3-way * 5-way Iiodpfx Abew D Eh Ijvec * 6-way * 12-way * 13-way * 16-way Note: Original new prices can be found in the attached documentation. I would like to pay 1/3 of the new price.

Condition: used, Manufacturer : SISE Model : 95E27 DC95 Iiodpfx Abjy Ufitevoc Type: Hot water heat controller Heating capacity: 28.1 kW Cooling type: 60 kW plate heat exchanger Recirculation: immersed pump Maximum temperature: water 95°C Process inlet and outlet connection: 1¼" Technical file available

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2026, total height: 220 mm, total length: 825 mm, total width: 575 mm, type of input current: AC, control voltage: 220 V, DGUV certified until: 07/2027, Jufeba temperature control unit Tabletop model: TG 2-2 T Stainless steel design Iiodpfx Abet U Uxuovsc Dry heating Simple temperature control Top-quality technology Connection: 230V, ready for plug-in Dimensions: 575 x 825 x 220 mm (W x D x H) Used unit, cleaned & SAB inspected Many other temperature control units in stock!

Year of construction: 2015, condition: excellent (used), The temperature control unit is for sale ;2015- the new price was 4995€ Medium : Water Functions - Function for self-optimizing temperature control - Function and fault displays - User-dependent and password-protected rights - Limit comparator (tolerance band monitoring of the actual value with alarm message) - Adjustable setpoint limit - Weekly timer - Automatic heating and cooling program - Freely selectable ramp function for temperature changes during heating and cooling - VNC server via Ethernet (enables complete operation and management from the PC) - 2nd temperature setpoint - Tool management (setpoints and control parameters can be be saved as a recipe) - Measured value recording for quality assurance (actual values can be be output to SD card with time stamp) - Electronic level monitoring with dry run protection - Automatic filling and replenishment with leakage and level function monitoring level function monitoring - Automatic venting Monitoring/safety - Short-circuit-proof controller and control outputs - Temperature sensor in circulating medium flow and return - Safety temperature limiter to prevent overheating and Safety valves against overpressure - Contactless heating control with solid state relay - Safety temperature reduction when switching off - Acoustic and visual warning signal with symbol and text text on the touch screen- Symmetrical mains load with three-phase drive and three-phase heating elements three-phase current heating rods - 3-fold safety shutdown of the heater - Reversible circuit breakers and motor protection switch Isdpfx Abom Dtm Asvsic - Dirt trap in the cooling water supply Hydraulics - Continuous cooling via motor valve

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2026, type of input current: AC, input current: 10 A, DGUV certified until: 06/2027, Jufeba TG 1-3 T temperature control unit TOP table-top unit with container Stainless steel design Dry heating system Manual temperature control Iiedjxiu Hbepfx Abvsc Robust technology 230V connection Used unit, cleaned With warranty + spare parts service Optional: Maintenance contract Stainless steel GM container Delivery service Training & commissioning Visit our large showroom!

Condition: new, Year of construction: 2025, TEMP 90 W9 SSR - DM General information: maximum 90 ° C water temperature range -robustes steel sheet housing device on wheels Hydraulic: Immersion pump (make Bacon) with pressure / vacuum function (leak stop operation) -Qmax. 60 l / min Pmax. 3.8 bar Tank and heater made of stainless steel Heating power 9 kW tank capacity 12 liters Fittings made of brass/stainless steel-automatic water filling -electrical level indicator -indirektes cooling system (plate heat exchanger) Iodpfjd Aathox Abvsic Cooling capacity ~ 40,000 kcal / h (10 sheets) Display gauge -integrated bypass Solenoid valves for cooling and recovery Electrical and control: -Electronic, self-optimizing PCB control -electronic flow measurement Control voltage in the unit 24 V AC -Akustische and visual alarm indicator -Solid state relays Safety thermostat Sensor break monitoring Monitoring of tube breakage and leakage Connection cable with plug -Dimensions: 295 x 575 x h495 mm -Weight: 40 kg

Year of construction: 2011, operating hours: 34,000 h, condition: used, functionality: fully functional, A dual-temperature control unit from Single is for sale. The original purchase price was approximately €5,100. Medium: Water Reinforced pump Heating capacity: 9 kW per unit Cooling capacity: 20 kW per unit Isdpfezbx Rpsx Abveic Mobile Interface, 20 mA PT 100 sensor Flow measurement Alarm

Year of construction: 2014, operating hours: 150 h, condition: as good as new (ex-display), The temperature control unit from GWK is for sale; it was only used at trade shows. I can gladly send you a description of the unit! Medium: Water Heating capacity: 9 kW Iisdpfx Aoza U Dcsbvsc Operating temperature: max. 160 degrees Celsius Cooling capacity: 40 kW Cooling: Heat exchanger Mobile

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Iijdpfx Ajy Su Efobvoc

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Iijdpfx Abey Su D Usvoc

Condition: used, machine/vehicle number: 462962, Temperature control unit from manufacturer Regloplas, used and untested. The unit is designed for applications in tool temperature control, injection molding, and industrial process technology. It operates as a single-circuit system with the RT 45 control system. Oil is used as the medium, with a maximum flow temperature of 250 °C. The heating capacity is 13.7 kW, and the pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 145 kg. Iiodpey Su D Ijfx Abvec

Condition: used, machine/vehicle number: 543109, Temperature control unit from manufacturer Regloplas, used and untested. The unit is suitable for mold temperature control, injection molding, and industrial process applications. It operates as a single-circuit system equipped with the RT 45 control system. The heat transfer medium is oil, with a maximum flow temperature of 300 °C. Heating power is 13.5 kW; pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 160 kg. Ijdsy Su Dhepfx Abvsic

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Isdpfey Su A Rox Abvjic

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-03, Temperature control unit by gwk, pre-owned and untested. Designed for mold temperature control, injection molding, and industrial process technology applications. Operates as a single-circuit system with the Logotherm control system. The unit uses water* as the heat transfer medium, with a maximum supply temperature of 30 °C*. Heating capacity is not specified; pump capacity is 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Iodpfxjy Su Aqj Abvsic

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-04, Temperature control unit by gwk, used and untested. Designed for tool temperature regulation, injection molding, and industrial process engineering. Operates as a single-circuit system with Logotherm control. Uses water* as the medium, with a maximum supply temperature of 30 °C. Heating capacity not specified, pump delivers 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Iedpfx Abjy Su Adsvoic

Condition: used, Year of construction: 1999, machine/vehicle number: 14490/99, Temperature control unit by Robamat, used and untested. Designed for mold temperature control, injection molding, and industrial process engineering applications. The unit features a dual-circuit system with a Thermocast 4212 control system and two µP103 Mega control units. Operating medium: oil*. Maximum flow temperature: 320 °C. Heating capacity: 2x 34 kW*. Pump output: 75 l/min at 5.0 bar*. Year of manufacture: 1999. Total weight: 350 kg. Iedpfx Aey Surfjbvoic

Condition: used, Year of construction: 2001, machine/vehicle number: 14947/01, Temperature control unit from manufacturer Robamat, used and untested. The unit is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a multi-circuit system with Thermocast 4212 control system. The medium used is oil*, with a maximum supply temperature of 320 °C. Heating capacity is 34 kW*, pump capacity is 75 l/min at 5.0 bar*. Year of manufacture: 2001, total weight: 350 kg. Isdpfxey Sukuj Abvoic

Year of construction: 2021, condition: used, machine/vehicle number: 117500730003, Temperature control unit from manufacturer Regloplas, used and untested. The device is designed for applications in tool temperature control, injection molding, and industrial process technology. It operates in a dual-circuit system with the RT100 control system. The medium used is pressurized water, with a maximum supply temperature of 160 °C. Heating capacity is 38 kW, pumping capacity is 2x 60 l/min at 6.0 bar. The unit features two magnetic coupling pumps (Speck CY-4281). Year of manufacture: 2021, total weight: 230 kg. Iedpfxjy Suiko Abvsic

Year of construction: 2021, condition: used, machine/vehicle number: 117500730004, Temperature control unit by Regloplas, used and untested. The device is intended for applications in mold temperature control, injection molding, and industrial process engineering. It operates as a dual-circuit system with the RT100 control unit. The medium used is pressurized water, with a maximum supply temperature of 160 °C. Heating capacity is 38 kW, and pump performance is 2 x 60 l/min at 6.0 bar. The unit is fitted with two pumps (CY-4281.0823). Year of manufacture: 2021. Total weight: 230 kg. Iodpfx Aey Suhyebvoic