Used Circulation Thermostat for sale (1,617)

Condition: used, Year of construction: 2011, SMC Deutschland GmbH Temperature Control Bath, Water Cooled, INR 244 713D Model: INR244713D Condition: Used Technical Specifications: Fsdpex I Al Eefx Ab Negh Thermo-Con 220-230VAC 50/60Hz General Information: SMC Thermo-Con Temperature Control Unit (TCU), removed from ASML Yieldstar S-200B. Cooling/temperature regulation (MCW/PCW) for optics, electronics, sensor applications ASML 4022.639.27493

Condition: excellent (used), Huber CC-520w vpc cooling/heating bath and recirculating thermostat Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: CC 520 Type: CC-520w vpc Controller: Compatible Control CC2 Temperature range: -55 to +100 °C Power connection: 400 V / 3~ N / 50 Hz Offered is a used Huber CC-520w vpc cooling/heating bath and recirculating thermostat with water-cooled refrigeration unit and Compatible Control CC2 regulation. The unit features an integrated stainless steel temperature control bath and connections for external temperature control applications. It is suitable for laboratory, testing, and industrial temperature control processes, as well as for cooling and heating connected devices. Fgjdpfxezukkmo Ab Neh Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: CC 520 Type: CC-520w vpc Controller: Compatible Control CC2 Temperature range: -55 to +100 °C Power connection: 400 V / 3~ N / 50 Hz Max. power consumption: 14.5 A Refrigerant: R507 Refrigerant quantity: 1.55 kg Max. pressure: 25 bar CFC & H-CFC free Operation via Compatible Control CC2 with display, SET/MENU buttons, and rotary encoder. Available interfaces/control connections: CAN, POKO ALARM, AIF REG+E-PROG, ECS STANDBY as well as RS232/RS485 SERIAL. Dimensions: Dimensions W × D × H: approx. 539 × 629 × 1102 mm Weight: approx. 161 kg Equipment: Compatible Control CC2 controller Integrated stainless steel temperature control bath with lid Water-cooled refrigeration unit Connections for external temperature control circuit Cooling water connections Movable stainless steel housing on castors Electronic interfaces and alarm/control connections Shipping information: Due to a device weight of approx. 161 kg, shipping by freight forwarder is planned. Dimensions of the device approx. 539 × 629 × 1102 mm. Condition: Used condition with noticeable signs of wear and tear due to age and use, dirt, scratches, and partial corrosion/rust marks. Scope of supply: 1 × Huber CC-520w vpc cooling/heating bath and recirculating thermostat with Compatible Control CC2. Scope of supply as shown in the pictures. The unit is available upon agreement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, Lauda bath circulator thermostat - Side panel missing, sides slightly dented - Shipping available at extra cost Fsdpew Un I Dsfx Ab Njgh

Condition: used, Year of construction: 2001, Techmatic circulation system: Fjdpfx Abjyylr Se Nsgh - elevator - lowerator - finger car turning - 16 floors double pallet 1400x1100 - cuber - doubler - center year 2001

Condition: excellent (used), Julabo Julabo Transparent Circulating Bath Thermostat CT 72/P incl. ED Thermostat Item Description: For sale is a Julabo transparent circulating bath thermostat CT 72/P with Julabo ED (v2) temperature controller. This unit comes from a laboratory inventory and is in used but technically fully functional condition. The bath heats and controls temperature accurately and stably, and circulation is present (see photos). Ideal for laboratory, industrial, educational, testing, or development applications. Technical Data (excerpt) Manufacturer: Julabo Labortechnik GmbH (Made in Germany) Model: CT 72/P with ED thermostat (v2) Bath temperature range: approx. +10 °C to +60 °C Temperature stability: ±0.02 K Heating capacity: Fedpfx Abszix Dqe Njgh 2000 W at 230 V Circulation pump: Flow rate approx. 15 l/min Bath volume: approx. 18 liters Bath material: Acrylic glass / stainless steel Interface: RS232 Power supply: 190–253 V / 50–60 Hz Protection class: I / IP20 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Specifications and data are subject to change and errors!) If you have any further questions, we will be happy to answer them by phone.

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Manufacturer: Thermo Haake Model: C30S Controller: Phoenix II Controller type: 003-6431 Device type: 003-8195 Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Application: The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, Fgedpfszi Tmaox Ab Nsh cooling and heating of measurement systems, temperature stabilization of liquids. Condition: used, functional, controller operates correctly, display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Included in the set: Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Condition: used, This listing is for the Thermo Haake SC100 Water Bath + Immersion Circulator. The unit is in full working condition and ready for immediate use. Thermostatic water bath with integrated immersion circulator, designed for accurate temperature control in research and industrial labs. Ideal for sample incubation, heating, and fluid temperature regulation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Fsdpey H Dlqofx Ab Negh Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, General Description: This listing is for the Grant Instruments TXF200 Circulating Bath. The unit is in full working condition and ready for immediate use. This high-specification stirred thermostatic bath offers precise temperature control and an intuitive digital interface. Designed for versatility, it supports both internal and external circulation, making it ideal for calibration, cooling, and general laboratory heating tasks. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Fgedpeyw Nicofx Ab Neh • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: excellent (used), Huber Model: 030TW Huber Unichiller 030TW – Recirculating Chiller / Cooling Thermostat For sale is a Huber Unichiller 030TW, a powerful and efficient recirculating chiller suitable for laboratory and industrial applications. This unit is designed for continuous operation, providing consistent cooling performance with high energy efficiency. Features & Functions: - Modern touchscreen control with favorites menu, timer, data logging, and remote control options - Robust, closed cooling system for reliable continuous operation - Environmentally friendly refrigerant - Suitable for ambient temperatures up to +40 °C - Ideal for laboratory, chemical, engineering, and process cooling applications Technical Data: - Temperature range: –20 °C to +40 °C - Temperature stability: ±0.5 K - Cooling capacity: - 3 kW at +15 °C - 2.75 kW at 0 °C - 2 kW at –10 °C - 1 kW at –20 °C - Circulation pump: max. 30 l/min at 4.1 bar - Controller: Pilot ONE touchscreen controller (5.7” color display) - Connections: Ethernet, USB, RS-232, Pt100 - Refrigerant: R449A (CFC and HCFC-free, eco-friendly) - Dimensions (W × D × H): 400 × 440 × 1230 mm - Weight: approx. 137 kg - Condition: used Scope of delivery: (see photo) - Huber Unichiller 030TW - Power cable Fgsdjzii T Aopfx Ab Neh (Technical data and specifications subject to change and errors excepted!) Please do not hesitate to contact us for further questions by phone.

Condition: excellent (used), Julabo Model: FP51-SL (v.2) Julabo Circulating Thermostat SL v2 with FP51 Chiller – Heating/Cooling Thermostat Description: For sale is a professional Julabo Circulating Thermostat SL (v2) in combination with the Julabo FP51 Chiller. This device is used for the precise temperature control of liquids and external circuits. It is ideally suited for laboratory, industrial, and test bench applications. The system enables both heating and active cooling, offering stable and accurate temperature regulation. Technical Data (excerpt): Circulating Thermostat: Julabo SL (v2) Temperature Range: approx. +20 °C to +320 °C Thermostat Power Supply: 230 V / 50–60 Hz Chiller: Julabo FP51 Chiller Power Supply: 400 V / 3NPE / 50 Hz Refrigerant: R507 Protection Class: IP21 Dimensions & Weight: approx. 60 × 70 × 100 cm Fjdpfxjzizn So Ab Nogh approx. 120–150 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Julabo Type: FP51-SL (v.2) Cryostat for low temperatures below -50 °C with a bath opening for internal and external temperature control. Cryostat circulators from the HighTech series, with HL or SL thermostats, are equipped with powerful pressure and suction pumps. The devices offer the full range of functions of the professional HighTech thermostat series. Technical data for FP51-SL Dimensions and volume Dimensions (W × D × H) 46 x 55 x 89 cm Filling volume 7.5 ... 12 l Weight 90 kg Pump connection thread M16x1 external thread Temperature values: Working temperature range -51 ... +200°C Temperature stability ±0.05°C Setting of the temperature display resolution 0.01°C Temperature display resolution 0.01°C Permissible ambient temperature +5 ... +40°C Supply voltage 400V/3PNPE/50Hz (plug 16A CEE) (R507) Performance data: Heating power 3 kW Cooling power 20 °C 2kW, 0°C 1.5 kW, -20°C 1 kW, -40°C 0.26 kW Refrigerant R507 Global warming potential 3985 Filling weight 1030 g Carbon dioxide equivalent 4.10455 t Pump performance Flow rate 22 ... 26 l/min Pump performance Delivery pressure 0.4 ... 0.7 bar Maximum suction capacity 0.2 ... 0.4 bar Viscosity max. 70 cSt Current consumption 16 A Electronics Interfaces Profibus optional Pt100 External sensor connection integrated Fgedpfjzgaa Iex Ab Neh Integrated program generator 6x60 steps Temperature control ICC Absolute temperature calibration 3-point calibration Temperature display VFD Temperature setting Keypad Voltage variants 400V/3PNPE/50Hz (plug 16A CEE) (R507) Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 440.10.008.12, functionality: fully functional, operating hours: 500 h, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 102 mm, cutting width (max.): 2,600 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,700 rpm, total length: 2,200 mm, total width: 1,500 mm, total height: 1,070 mm, overall weight: 350 kg, table height: 90 mm, year of last overhaul: 2012, Equipment: CE marking, documentation/manual, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo). Fgjdpfjz H Sbbjx Ab Neh

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 51.10.318.12, functionality: fully functional, operating hours: 300 h, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 315 mm, cutting width (max.): 420 mm, control type: manual, roller diameter: 440 mm, pivoting range: 45 °, actuation type: electric, total height: 1,900 mm, total length: 780 mm, total width: 650 mm, overall weight: 140 kg, table height: 91 mm, year of last overhaul: 2012, saw band speed: 333 mm/s, Equipment: CE marking, documentation/manual, motor brake, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard Fgedpfxez Im Hus Ab Neh - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: good (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 550 mm, overall weight: 500 kg, Pressta Eisele Profilma 501 Circular saw machine for aluminum and plastic profiles – ideal for series production with high volumes and precision requirements. Designed for 550 mm saw blades. The powerful 7.5 kW motor, in combination with the hydropneumatic saw feed (cutting from below), ensures fast and clean cuts. The cutting height is adjustable. Six pneumatic clamps (horizontal and vertical) with individually adjustable clamping pressure guarantee secure hold for delicate profiles. The stationary base frame (working height 980 mm), the manually opening protective cover, and the saw blade housing integrated under the table provide a high level of operational safety. Minimum quantity lubrication system with a 1-liter lubricant tank including level control. Max. cutting range: – Profile height: up to 140 mm – Profile width: up to 270 mm Fsdpfx Aboz Hzage Negh – Round material: Ø 180 mm Technical data: – Weight: approx. 480 kg – Dimensions (W x D x H): approx. 170 x 148 x 155 (192) cm - Year of manufacture: 2006

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 316792, total length: 2,700 mm, total width: 1,450 mm, total height: 1,900 mm, type of input current: three-phase, overall weight: 1,500 kg, Equipment: documentation/manual, Kaltenbach SKL452 NA including ESTA DUSTOMAT – Year of manufacture 2023 We are offering our Kaltenbach SKL452 NA including ESTA DUSTOMAT for sale. We purchased the machine directly from Kaltenbach as a new machine in 2023 and have since used it in the metalworking department of our WfbM (workshop for people with disabilities). The machine was used exclusively for cutting aluminum profiles. Fodpfx Asz H Sgdeb Nogh It was operated in a single-shift system with a maximum of approximately 6 hours of machine runtime per day. The machine can be inspected on-site after prior arrangement. Collection / Transport The machine is offered for sale exclusively at our location. Dismantling, loading, and transport must be organized and carried out by the buyer. If you are interested or would like to arrange a viewing appointment, please contact us.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 746, Offer 26216 Technical data: - Saw blade diameter up to 400 mm - Miter adjustable to the left and right up to 30° - Cutting range at 90° for round and square stock: 140 mm - Cutting range at 90° for rectangular stock: 210 x 120 mm - Cutting range at 45° for round and square stock: 120 mm - Cutting range at 30° for round and square stock: 105 mm - Cutting speeds continuously adjustable from 10 to 80 m/min Fodpfx Absz Ny Dde Nsgh - Feed speed of the saw blade hydraulically continuously adjustable - Pneumatic clamping system/vise - Coolant system + micro-spray system - Outfeed – roller conveyor with dimension stop: 3000 mm - Infeed – roller conveyor: 3000 mm - Pneumatic connection: 6 bar - Drive: 400 V / 4.0 kW - Space requirement: approx. W 1000 x H 1900 x D 1200 mm - Weight: approx. 1000 kg

Condition: used, Padelttherm HGU 9408/800 Hearth Furnace with Recirculating Air For sale is a professional Padelttherm heat treatment system / hearth furnace with recirculating air, type HGU 9408/800. The system was used for the heat treatment of aluminum housings and is designed as a gas-fired hearth furnace with air circulation. Two chain conveyors are also part of the documented overall system. Technical data: Manufacturer: Padelttherm GmbH Type: HGU 9408/800 Year of manufacture: 2019 Design: Hearth furnace with recirculating air / heat treatment system Material processed: Aluminum housings Temperature / Heating capacity - Max. permissible furnace chamber temperature: 800 °C - Operating temperature: 680 °C - Heating time from 20 °C to 680 °C: approx. 5–5.75 hours - Max. gross load weight: 4,900 kg - Heating medium: Liquefied petroleum gas (LPG) - Lower calorific value: 25.89 kWh/m³ - Gas inlet pressure / flow pressure: 100 mbar - Connected load: 523 kW - Natural gas flow rate: 20.2 m³/h - Combustion air: 560 m³/h at 80–100 mbar Burners / Recirculation - 4 burners, each 130 kW - 2 with pilot burners - Burner type: Cold air burner - Automatic ignition - Ionization flame monitoring - Individual burner control - 2 burners per recirculator - 2 hot gas recirculation fans Control technology - 2 control zones, front / rear - Electrical connection: 400 / 230 V, 50 Hz - Total electrical connected load: 21 kW - Hot gas recirculators: 2 × 4.0 kW - Combustion fan: 7.5 kW - Lift-up door drive: 1.5 kW - Hearth car drive: 1.5 kW - Controller: JUMO DiconTouch - Control behavior: PID - 10 programs - Display / Operation: DiconTouch - Temperature safety limiter: 2 × JUMO safetyM STB/STW - Thermocouples: NiCr-Ni Type K, Class 1 Usable space - Usable volume: 9.41 m³ - Usable width: 1,500 mm - Usable depth: 4,200 mm - Usable height: 1,300 mm - Internal dimensions: 1,600 × 4,300 × 1,400 mm Furnace dimensions - Width: 2,900 mm - Depth: 5,200 mm - Height: 3,330 mm - Weight: approx. 13,000 kg Overall dimensions of the system: - Width: 3,270 mm - Depth including track: 10,165 mm - Height including door portal: 4,355 mm Hearth car: - Width: 1,870 mm - Depth: 4,570 mm - Height: 780 mm Fjdpfx Ajz Hvzrsb Njgh Chain conveyor KF1400x120x80 - W × D × H: 1,785 × 14,680 × 1,850 mm - Weight: approx. 7,900 kg KF700x120x80 - W × D × H: 1,775 × 7,280 × 880 mm - Weight: approx. 1,650 kg "Everything from one source: We will gladly offer you a suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2023, operating hours: 4,837 h, functionality: fully functional, total length: 17,400 mm, total width: 1,970 mm, total height: 1,870 mm, cutting range round steel at 90°: 200 mm, type of input current: three-phase, overall weight: 2,300 kg, input voltage: 380 V, cutting range square steel at 90°: 200 mm, length stop: 8,000 mm, Equipment: documentation/manual, We are offering this like-new Jih-I Machinery JIH-NC24L circular saw for non-ferrous metals and aluminum, manufactured in 2023. Model: JIH-NC24L Serial number: N24L022C056 Date of manufacture: 20220826 Voltage: 380 V Frequency: 50 Hz Number of phases: 3 Power: 15 HP 8-meter infeed table 6-meter outfeed table Fgsdpfx Abezzp Epj Njh If you have any questions or would like more information, please feel free to send us a message.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Kaltenbach KKS 450 U metal cutting circular saw (2021) Manufacturer: Kaltenbach Type: KKS 450 U Year of manufacture: 2021 Condition: used, very good Clamping, sawing, retraction, opening – all easily controlled with the push of a button Semi-automatic miter circular saw Working range 150 mm Saw blade diameter up to 450 mm Miter adjustment 180° Adjustment of the cutting height via push button Two cutting speeds Scope of delivery: - Documentation - 2m infeed roller conveyor - 2m outfeed roller conveyor with digital material stop Fgedjzwhwvopfx Ab Neh - 2x saw blades

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Fgodpfsz Eft Iox Ab Nsh Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: good (used), Year of construction: 1985, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, Cold circular saw, metal circular saw type TRL 300, swivels on both sides Fgsdpfx Ajz Hwc Rsb Neh -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 300 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Dimensions: 1100/720/H1490 mm -Weight: 227 kg

Condition: used, This listing is for the Eppendorf thermostat C Dry Block Heater The unit is in full working condition and is ready for immediate release Description Peltier technology enables comfortable and precise temperature control from -10°C to +110°C Heating and active cooling in all common vessel and plate formats from 5μL to 50mL Precise maintenance of various temperature levels Reliable prevention of condensate formation with optional ThermoTop™ (tect™) lid Highly flexible due to large selection of exchangeable SmartBlocks Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4, 16, 37, 56 and 95°C) Individually store up to 15 programs Comprehensive range of program functions Fsdpsxwc Nmsfx Ab Negh Eppendorf Thermostat C is the ideal device to accurately set and maintain temperatures. The ThermoStat C features excellent temperature management. Peltier technology provides the comfortable and precise temperature control of all conventional lab vessels. The operation is easier and more intuitive than ever before. Predefined temperature keys provide quick access to five important experimental temperatures. Due to comprehensive program functions, you can also individually store 15 programs. With an extensive range of exchangeable SmartBlocks, the ThermoStat C adapts to any application. Key Features Heating and active cooling in all common vessel and plate formats from 5 μL to 50 mL Excellent temperature management Precise temperature control from -10°C to 110°C (110°C can be set when using the 12 mm and cryo SmartBlocks.) Precise maintenance of various temperature levels Reliable prevention of condensate formation with the optional ThermoTop® (tect) lid Maximum flexibility thanks to large selection of exchangeable SmartBlocks™ Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4°C, 16°C, 37°C, 56°C and 95°C) Comprehensive range of program functions 2 second block exchange due to quick release system of SmartBlock

Condition: ready for operation (used), Eisele VMS 350 Saw, Metal Circular Saw, Circular Saw Maximum cutting cross-section, round at 90°: 120 mm Maximum cutting cross-section, rectangular at 90°: 170 x 100 mm Maximum cutting cross-section, round at 45°: 120 mm Maximum cutting cross-section, rectangular at 45°: 120 x 100 mm Saw blade diameter: 350 mm Fgedpfx Aboz Il Evo Nsh Saw blade width: 3 mm Swiveling: 45-90-45-30° Rotational speed: 17 RPM; 34 RPM You are welcome to visit us for a viewing. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be prepared. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Year of construction: 2013, condition: used, This machine is used for sharpening circular blades for Eillert slicing machines. Fsdpfxsz H At Ue Ab Nogh The machine is in good working order and ready for use. Please check my other listings.

Condition: used, This listing is for the Grant T100 12L Heating Circulating Bath The unit is in full working condition and is ready for immediate use Grant T100 12L Heating Circulating Bath – Stainless Steel Tank The Grant T100 12L Heating Circulating Bath is a robust, precise temperature control system combining the T100 Optima circulator with a 12-litre stainless steel tank. Ideal for laboratories requiring high stability and reliability for routine heating applications, it’s designed for use across many scientific disciplines. Fedpfx Abey Dp Eke Negh Key Features Temperature Range: +5 °C to 99 °C (cooling via immersion coil available) Capacities: 12 L Stainless Steel Tank: Durable, easy to clean, resistant to corrosion Temperature Stability: ±0.05 °C Temperature Uniformity: ±0.1 °C Heating Power: ~1.3 kW Controller: Grant T100 Optima circulator