Used Temperature Transducer for sale (6,911)

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K Dwsdsz I Tt Ispfx Ab Nec MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Year of construction: 2018, condition: like new (used), Temperature sensor Measuring transducer Manufacturer: Jumo Unused Type: PT 100 Number: 902102/10 00055514 0128409001008450005 Immersion tube, stainless steel Weight: 1 kg Total length: 570 mm Immersion length: 470 mm With bracket Dedpofgwmbsfx Ab Nowc CH 512032 Estimated age

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving platform Load capacity of the moving platform: 50 kg for VT3 7012 S2 All-round grids in the moving platform secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The hot chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Refrigerating unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Dwedpfx Abox Exmts Nec Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation | Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_2K in the steady state in the moving platform Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: good (used), functionality: fully functional, Year of construction: 2021, The temperature control unit GWK (Technotrans) is for sale. The unit has a new pump installed. Medium: Water Operating temperature: 180 degrees Celsius Dwodpszul Tpsfx Ab Nsc Heating capacity: 9 kW Cooling capacity: 40 kW

Condition: good (used), functionality: fully functional, Year of construction: 2015, We are offering these 2 HB-Therm units for sale. They have the latest software version and have been serviced. Djdjz Inmvspfx Ab Njwc Delivery is possible, with the buyer covering the shipping costs.

Year of construction: 2002, condition: good (used), Vötsch VTSR 7034/S Climate Testing Chamber, -70 to +180°C Manufacturer: Vötsch Dwsdpouuif Nofx Ab Nsc Type: VTSR 7034/S Test chamber volume: 335 liters Climate testing chamber Temperature range: -70 to +180°C Supply voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated current: 22 A Rated power: 12.5 kW Refrigerant (cooling): R 404 A Refrigerant (heating): R 23 Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Year of manufacture: 2002 TK-11 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2005, Andreas Schmid Climate Test Chamber -40°C to +130°C Dwjdouuibkjpfx Ab Njc Manufacturer: Andreas Schmid Type: VKT 3 Air conditioning unit Regulation and Control Climate program controller SE 502 The climate controller contains 4 control zones Programmer 8 setpoints 32 control channels 400 segments 25 programs 8 loops per program Temperature range: -40°C to +130°C Temperature stability: +-1.0 K over time Average temperature change rate from -40°C to +80°C: approx. 3K/min Cooling system: Refrigeration compressor, water-cooled Refrigerant: R23 / R 404 A Cooling water inlet temperature: 15 Ambient temperature: 35°C Heating system: electric resistance heating Electrical connection: 240/400 V, 3 PH, N, PE Power consumption Cooling mode: 24 A Heating mode: 18 A Dimensions: W x D x H 1600 x 800 x 2250 mm Chamber: W x D x H 670 x 640 x 750 mm Internal: TK16 You can find more items – new and used – in our shop! International shipping costs available upon request!

Year of construction: 1998, condition: good (used), Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Article No.: 60885637 Temperature chamber Temperature range: -70°C to +180°C Supply voltage: 400V Rated current: 24A Rated power: 9.5 kW Refrigerant (refrigeration): R 404 A Refrigerant (low-temperature): R 23 Year of manufacture: 1998 Chamber: W x D x H 670 x 640 x 750 mm Djdpsuuin Rsfx Ab Nswc TK 09 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Universal water temperature control unit with electric heating and connections for external cooling. Pressurized water temperature control unit, circulating process temperature control, heater, cooler, electric heating. SINGLE type STW 180/1-36-100-S Mfg. No.: 130568 Year of manufacture: 2013 Temperature max. 180°C Temperature range +20°C to 180°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume approx. 22 liters (internal volume) Dwodpfx Abjz N H D De Njc Heating capacity 36 kW - direct injection cooling Pump motor power 1.1 kW Heat transfer medium water Circulating water supply + return DN 32 - G 1 1/4" Cooling water supply DN 20 G 3/4" Cooling water return DN 20 G 3/4" Connection power 41 kVA Rated current 57 A Control system SC Standard type R8200-S-1-SI1-0-6 Mains connection 400 Volt, 50 Hz. - Temperature control - An external cooling unit or an external cooling circuit is required for cooling (cooling is achieved through direct injection of cooling water into the cooling medium without a heat exchanger). - mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1300 x 370 x 1150 mm Weight 200 kg Good condition

Year of construction: 2016, condition: like new (used), Ytron Vibration Mobile Stainless Steel Feeder Hopper EX rated 11 2 D IP65, Atex Vibration motor Temperature probe Year 2016 As new condition Dsdpfx Abjzp N Exj Nswc Including control box

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG73/D K/RT50 Temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial use in plastics processing, especially for temperature control of injection molds and other process tools. Serial No.: 102010690002 Year of manufacture 2010 Temperature max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Dwodoz N H Dwspfx Ab Njc Operating overpressure: max. 6 bar Pump capacity: 60 l/min. Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooler) Motor power of the pump: 1 kW Continuous sound pressure level

Year of construction: 1997, condition: good (used), Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Article No.: 60885637 Temperature chamber Temperature range: -70°C to +180°C Supply voltage: 400V Rated current: 24A Rated power: 9.5 kW Refrigerant (high temperature): R 404 A Refrigerant (low temperature): R 23 Dwsdpfeuuiv Iox Ab Nec Year of manufacture: 1997 TK 08 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Feutron Temperature Testing Chamber -40 to +100°C The Feutron TPK 3403/125, thanks to its robust design, is a reliable workhorse for standardized temperature tests. The main application areas for this model are: 1. Electronics and Component Testing This is the most common application. It involves testing how components react to extreme temperatures: Functional testing: Does the circuit board still function flawlessly at -40 °C or +150 °C? Burn-in tests: Artificial aging of components through continuous operation at high temperatures to provoke early failures. 2. Material Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in the cold? Deformation: Do composite materials warp in the heat? Storage tests: How stable do chemical substances or adhesives remain over long periods at a constant temperature? Dwodpfxoy Nynas Ab Nsc 3. Quality Assurance (QA) Sample testing: Tests carried out during production to ensure that the production process meets the specified temperature ranges. Standard testing: Conducting tests according to common industry standards (e.g., DIN EN 60068), which prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions before mass production. Manufacturer: Feutron Type: TPK 3403/125 Temperature range: -40 to +100°C Refrigeration unit: Air-cooled condenser Temperature stability: approx. ±0.1 to ±0.5 K Usable volume: approx. 125 liters Refrigerant: R22 Operating overpressure: 23 bar Power connection: 220/280V-3-50Hz Supply line fuse: 25 A Protection class: IP 20 Weight: 480 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs upon request!

Year of construction: 1990, condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40 Spring, summer, autumn, and winter – your products must be able to withstand different temperatures during manufacturing, transport, storage, and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function, and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 liters Temperature range: -40°C to +180°C External dimensions: 110 cm wide, 173 cm deep, and 204 cm high Internal dimensions: 80 cm wide, 85 cm deep, and 85 cm high Dwodpfxjh Izh Io Ab Nsc Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used Complete factory closure, large selection of storage platforms, pallet racks, shelving systems, paternosters. High-quality industrial machines, lathes, grinding machines, hand tools. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: new, functionality: unexamined, Year of construction: 2016, machine/vehicle number: S10002165, GWK teco cs 90e wi60.00 WT02 – Water-cooled chiller – 42 kW – Year of manufacture 2016 For sale is a GWK teco cs 90e wi60.00 WT02 water-cooled chiller, manufactured in 2016. Technical data Manufacturer: GWK Gesellschaft Wärme-Kältetechnik mbH Condition: New Model / Type: teco cs 90e wi60.00 WT02 Year of manufacture: 2016 Serial number: S10002165 Cooling medium: Water Rated cooling capacity: 42 kW Rated heating capacity: 0 kW Electrical connection power: 1 kW Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Rated current: 3.2 A Dwjdpfx Ajz Nh Hyjb Nsc Max. fuse rating: 16 A Filling volume: 9.5 l Wiring diagram no.: 0474063 Condition: used. Inspection: possible by prior appointment. Note: The technical specifications were taken from the available nameplate.

Condition: excellent (used), HB-Therm: "Flow-5" for monitoring and controlling temperature control circuits Flow-5 available with four, six, or eight external circuits, optionally equipped with ball valves. Water-based flow meter and controller "Flow-5". This device is used to monitor and control parallel-connected temperature control circuits in the injection molding process. The "Flow-5" is available for media temperatures up to 120°C, and with four, six, eight, or 16 circuits. All media-carrying components are made of stainless steel. Flow-optimized precision cast parts and large flow cross-sections are designed to reduce pressure loss. The devices can be installed directly into the injection molding machine and connected to the mold with short lines. The version with eight circuits measures 239 × 175 × maximum 506 mm. Depending on the version, the weight ranges from 10 to 19 kilograms. During operation, the system monitors and documents flow and temperature in each mold circuit. Limit values, sensor monitoring, and an alarm system are designed to detect deviations at an early stage. Integration into higher-level systems is done in conjunction with the temperature control units or via OPC UA. Several HB-Therm flow meters and water distributors available. Condition: like new – from cleanroom production. The following versions are available: 3-way 5-way 6-way 12-way 13-way 16-way Dwodpfx Asw D Eh Ijb Njc Note: Original new prices can be found in the attached documentation. I would like to pay 1/3 of the new price.

Condition: good (used), Zwick / Roell Temperature Chamber for AllroundLine Type: TEE160/LN2 40S The RS simulator model TEE160/LN2 40S is a specialized temperature chamber primarily designed for material testing in combination with ZwickRoell testing machines (especially the AllroundLine). Flexible in Application The innovative temperature chamber from ZwickRoell guarantees a flexible, customized testing system tailored to customer needs without compromise. This ensures reliable test results, even in the future. The safety door function guarantees operator protection in accordance with European safety standards. The chamber door serves as a safety door with a locking mechanism. Precise Temperature Control The temperature chamber creates extremely homogeneous and precise conditions for the test specimens throughout the entire chamber volume. As a result, the test results are accurate and repeatable. Key Specifications Temperature range: -40 °C to +160 °C. Cooling system: Liquid nitrogen (LN2) for high cooling rates. Temperature chamber for the AllroundLine Application: Specifically designed for integration into material testing machines to perform mechanical tests (e.g., tensile or compression tests) under controlled environmental conditions. All sheets in the door area (inside and outside) are made of stainless steel. Solid base frame, demountable Dimensions: W x D x H = 1400 x 600 x 800 mm Chamber: W x D x H = 440 x 530 x 650 mm Test opening: 110 mm Dwodpfx Abozcpwpj Noc Power supply: 400/230 16A 3N〜50/60Hz Cooling via LN2 (liquid nitrogen) "Everything from a single source: We would be happy to offer you a suitable financing option for your project." You can find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), functionality: fully functional, machine/vehicle number: 310579, overall weight: 80 kg, heating capacity: 10.2 kW (13.87 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 16 A, Type: P160/9/SG51/1K/RT45 Power: 10.2 kW Max. operating temperature: 160 °C Dwodpfx Asz Dxg Sob Njc Medium: water Temperature control unit

Condition: good (used), Heraeus Vötsch HC 4055 Temperature Testing Chamber Manufacturer: Heraeus Vötsch Dwjdpfx Abeuuilve Noc Type: HC 44055 Temperature chamber Temperature range: +180°C Rated voltage: 380V, +/-10%, 3/N, 50Hz Rated current: 13.5 A Rated power: 9 kW Housing dimensions: W 1065 x D 1560 x H 1890 (mm) Observation window: Width x Height 350 x 640 mm Test chamber: (L x D x H) approx. 800 x 795 x 855 mm Test chamber volume: 550 l Chamber is air-cooled Caution: Chamber can only be operated as an oven. Refrigeration circuit is empty and deactivated. Climate control system is deactivated. Disconnected contactors: 03K2 Compressor 03K5 Condenser fan 15K6 Panel heater Semiconductor relay 21V4 Humidifier. Weight approx. 550 kg You can find more new and used items in our shop! International shipping costs upon request!

Condition: used, STANGE Elektronik GmbH Industrial Control / Process Control SE-604 Automation solution with multitasking PLC CoDeSys For sale is a used industrial control system from STANGE Elektronik GmbH. The SE-604 is a powerful control and visualization solution for industrial process and heat treatment plants. Control, PLC, program management, and plant visualization are combined in a single system. Technical data: Manufacturer: STANGE Elektronik GmbH Type: SE-604 Display: 6.5 inch TFT-LCD Resolution: 640 x 480 pixels Operation: Foil keypad, 34 keys Processor: Pentium-based 32-bit processor Working memory: 256 MB DRAM Program memory: CompactFlash ≥ 256 MB Operating system: WindRiver VxWorks PLC: IEC 61131 CoDeSys multitasking soft PLC Power supply SE-604: 24 V DC (18–36 V) Power consumption: typ. 24 W Operating temperature: 0 to +50 °C Protection class: Front IP65 / Rear IP20 Dimensions SE-604 (W x H x D): 290 x 165 x 90 mm Weight SE-604: approx. 2.5 kg Functions: Up to 50 control zones Up to 250 programs / recipes Up to 500 alarms with alarm history Program generator for up to 50 setpoints and 64 control tracks PID control with self-optimization function Plant visualization Web server / remote control Configurable user and operating levels Interfaces: Ethernet 10/100 2 x USB 2.0 RS232 RS422 CAN Modbus Profibus DP optional Application areas: Industrial and process plants Heat treatment plants Universal chamber furnaces Nitriding furnaces Hearth car furnaces Autoclaves Dwsdpfxsz Nvkys Ab Nsc Climate chambers Scope of delivery: STANGE SE-604 control system in housing Connection and communication cables as shown in the pictures Condition: Used Optical condition as shown in the pictures Operating hour counter available The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, STANGE Elektronik GmbH Industrial control / Process control SE-604 Process control with temperature monitoring and additional connections For sale is a used industrial control unit from the manufacturer STANGE Elektronik GmbH, model SE-604, installed in an additional housing with various operating and connection components. The SE-604 combines industrial process control, a multitasking PLC with CoDeSys, program management, and plant visualization in a single system. The offered unit also features a PMA temperature controller, an operating hour counter, several industrial connectors, and additional operating and connection options. Technical data: Manufacturer: STANGE Elektronik GmbH Type: SE-604 Device type: Industrial control / Process control Display: 6.5-inch TFT-LCD Resolution: 640 × 480 pixels Operation: Foil keypad, 34 keys Processor: Pentium-based 32-bit processor Working memory: 256 MB DRAM Program memory: CompactFlash ≥ 256 MB Operating system: WindRiver VxWorks PLC: IEC 61131 CoDeSys multitasking soft PLC Voltage supply SE-604: 24 V DC (18–36 V) Power consumption: typ. 24 W Operating temperature: 0 to +50 °C Protection class SE-604: Front IP65 / Rear IP20 Dimensions SE-604 (W × H × D): 290 × 165 × 90 mm Weight SE-604: approx. 2.5 kg The specified dimensions and weight refer exclusively to the SE-604 control unit. The overall dimensions and total weight of the offered unit with housing are not known. Functions according to the manufacturer: Up to 50 control zones Up to 250 programs / recipes Up to 500 alarms with alarm history Program generator for up to 50 setpoints and 64 control tracks PID control with self-optimization function Configurable plant visualization Web server / remote control Configurable user and operating levels Interfaces of the SE-604 according to the manufacturer: Ethernet 10/100 2 × USB 2.0 RS232 RS422 CAN Profibus DP optional Modbus optional Additional equipment of the offered unit: Dwsdpjz Nvk Hofx Ab Nec PMA KS 10-1 economy temperature controller Temperature monitoring test chamber Müller operating hour counter Button "Heat Plate" Button "Light" Front USB port Multi-pole industrial connectors Additional colored connection sockets Housing with side carrying handles Connection and connecting cables as shown in the pictures The exact arrangement and function of the additional connections are not known. The mentioned control functions describe the technical possibilities of the SE-604 according to the manufacturer. The actually installed software and configuration of the offered unit have not been checked. Application areas: Industrial and process plants Heat treatment plants Multi-purpose chamber furnaces Nitriding furnaces Hearth car furnaces Autoclaves Climate chambers Testing and experimental systems Spare part for compatible systems Scope of delivery: 1 × STANGE SE-604 control system in housing 3 × Connection and connecting cables as shown in the pictures 1 × Folder as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear are present Operating hour counter present The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer further questions by phone.

Year of construction: 2020, condition: like new (used), functionality: fully functional, The Regloplas P140XS temperature control unit is for sale. Dsdpfxozvur Ds Ab Nowc Medium: Water Heating capacity: 3 kW Cooling capacity: 38 kW Maximum flow rate: 11 l/min Weight: 25 kg Dimensions (W/H/D): 143/420/520 mm

Year of construction: 2015, operating hours: 100 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4S 10kN 2268/000 1215 902, Dyna-Mess TP 10kN HF Cyclic Testing Machine / Endurance Testing System – Top Condition, including temperature chamber (up to 120°C) & software Description: Manufacturer: DYNA-MESS Prüfsysteme GmbH Model: TP 10kN HF (Servopneumatic High-Frequency Cyclic Testing Machine) Maximum test force: 10 kN (static and dynamic range) Maximum machine travel: 12 mm Date of purchase: December 2015 Condition: Almost new, very little use, immediately ready for operation (Plug & Play) Availability: Immediately For sale is a compact, high-precision cyclic testing machine from the premium manufacturer DYNA-MESS with a 10 kN nominal load and 12 mm stroke. The system was acquired for dynamic endurance tests and lifetime determination as part of a research project, and has not been used since. It is in excellent, virtually new condition both visually and technically. The complete package includes a matching temperature chamber with controller up to 120°C. This enables standard-compliant, dynamic testing of components and materials under realistic thermal environmental conditions. System & Scope of Supply: Load frame Dyna-Mess TP 10kN HF with high-precision force and displacement sensors. Dsdjzunz Nspfx Ab Nowc Complete PC including installed and calibrated control software DYNA-TCC under Windows 7. The system operates completely independently and is immediately ready for use. Temperature chamber with external control unit for tests up to 120°C. All associated documentation and connection cables. The machine is perfectly suited for laboratories, universities, or quality assurance departments looking for a reliable system for fatigue and endurance testing without incurring the cost of a new machine. Inspection of the machine is possible by prior arrangement. As this is a commercial sale, the machine is sold ex works without warranty or guarantee. The sale is preferably to a buyer who arranges self-collection (dismantling and transport must be organized by the buyer). Price: €20,000 negotiable plus VAT.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, input frequency: 50 Hz, input voltage: 400 V, empty load weight: 50 kg, Tool tempering heating: 9 kW. Temperature: 150°C. Dodszab A Eepfx Ab Nswc

Condition: ready for operation (used), Year of construction: 2017, Wittmann MTC Primus-C90 F27 Temperature Control Unit, Single-Circuit Only one unit is available. Year of manufacture: 2017 Max. temperature: 90°C Pump capacity: 40 l/min Dimensions: approx. 235mm x 590mm x 660mm (W x D x H) Weight: approx. 31 kg Power: 10 kW You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Dedpfsyw Rfxox Ab Nowc Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.