Used Temperature Transducer for sale (7,148)

Year of construction: 2007, condition: good (used), Temperature control unit HB-Therm HB-100 U1 Stock no.: 503631 Machine/Device type: Temperature control unit Manufacturer: HB-Therm Model: HB-100 U1 Year of manufacture: 2007 Dedpfx Ajxt Nq Ash Uswd Max. operating temperature: 100°C Heating capacity: 8 kW Heat transfer medium: Water

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 93420 353599 -Horn: Type CTC2058800 -Tool head: Number: 7x ultrasound transducer units available -Price: per piece -Dimensions: 450/110/H120 mm Dwedpjxrzwrefx Ah Ued -Weight: 6.1 kg/pc.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Dwjdpfx Ahsxr A R Te Uod Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: used, Year of construction: 2010, tank capacity: 10,000 l, GENERAL Construction type: upright Year of manufacture: 2010 Remarks: Tank was designed for an LNG filling station but was never put into operation; a tube bundle is installed inside above the flange, which can be used for thermal control; 2 transport saddles made of steel (Fe) are available; a section of insulation and the insulation jacket is missing in the upper part of the cylinder; External diameter: 1,850 mm Overall width: 2,300 mm Overall height: 7,700 mm Heating/cooling: available Insulation: available Dwodpfxexqb Ins Ah Uod Max. overpressure: 18.0 bar Support type: on feet Location: Bremen Technical documentation: drawing, various documents, operating manual Name plate: Volume: 10,000 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: unused Cylindrical height: 5,239 mm TANK Max. operating temperature (tank)/°C: 50 °C Number of feet: 3 pcs HEATING/COOLING JACKET Internal tempering: full pipe coil INSULATION Insulation jacket: bolted Insulation jacket material: stainless steel EQUIPMENT Note: minor adhesion, pressure marks on the cylinder MATERIAL SPECIFICATION Foot material: steel

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 17651, overall weight: 350 kg, Temperature control unit by Robamat Technical data: Voltage: 400V Frequency: 50 Hz Current: 63A 24V DC Max. temperature: 320°C Dsdpfx Ahow U A Ulj Ujwd Perfectly suited for precise temperature regulation in industrial processes and machine control systems. This proven device supports demanding temperature management in manufacturing environments and stands out for its reliable performance under moderate operating conditions. The scope of supply includes the appropriate documentation and, if available, an operating manual.

Year of construction: 2007, condition: good (used), Temperature Control Unit HB-Therm HB-100 U1 Stock No.: 503630 Machine/Device Type: Temperature Control Unit Manufacturer: HB-Therm Model: HB-100 U1 Year of Manufacture: 2007 Dwedpfx Ahsxt Nn Ue Ujd Max. Operating Temperature: 100°C Heating Capacity: 8 kW Heat Transfer Medium: Water

Condition: excellent (used), Vötsch Type: VT 7060 Vötsch VT 7060 Temperature Chamber 600 Liter with Simcon 32-net Chamber is air-cooled Reliable climate chamber for demanding environmental simulations Ideal for laboratories, R&D, and quality assurance. Device description: For sale is a professional temperature chamber from manufacturer Vötsch Industrietechnik, model VT 7060 with SIMcon 32-net controller. This high-performance unit is suitable for a wide range of demanding environmental simulations, from material testing and electronics tests to long-term climate stress tests. Technical data (summary): Model: Vötsch VT 7060 Internal volume: approx. 600 liters Temperature range: –70 °C to +180 °C Temperature deviation when stabilized: Temporal: ±0.1 K to ±0.5 K Spatial: ±0.5 K to ±2.0 K Temperature change rate (without test specimen): Heating: 4 K/min Cooling: 3 K/min Control: SIMcon 32-net with touch panel Interfaces: RS232, optionally RS485/422 1 × port, NW 50 mm, left 1 × port, NW 125 mm, left Djdewybb Nopfx Ah Uewd 2 × ports, each NW 125 mm, right External dimensions (approx.): Width 1090 × Height 1960 × Depth 1995 mm Internal dimensions (approx.): Width 800 × Height 800 × Depth 950 mm Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerants: R 404A and R 23 Weight approx. 675 kg For your safety as a buyer, please note the following: The following steps are carried out on all chambers we offer: 1. Functional test and replacement of necessary components 2. If necessary, new charge with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Shipping / Collection: Collection preferred Shipping via freight carrier on pallet possible Europe-wide. (Shipping costs according to expenditure) Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: used, tank capacity: 25,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Remarks: 2 different manufacturers (see photos) Internal diameter: 3,200 mm Total height: 5,331 mm Heating/cooling: available Insulation: available Dwjdpfexqbz Uex Ah Ujd Max. permitted operating temperature: 70 °C Max. permitted operating overpressure: 3.0 bar Support type: Feet Location: External storage, France Technical documentation: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Volume: 25,000 liters Jacket volume: 70.0 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 3,000 mm Last application: Food industry (Isomalt) TANK Specific gravity of medium (t/m³): 1.35 (t/m³) Bottom type: Conical bottom Number of support legs: 5 pcs HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: Welded Insulation material: Rock wool Insulation jacket material: Stainless steel Insulation thickness: 100 mm EQUIPMENT Manhole / Dome: In cylinder (approx. 350 x 450 mm), in top head (DN 400) Outlet: Flange DN80 TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Top wall thickness: 3 mm

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 18680, overall weight: 350 kg, Temperature control unit by Robamat Technical data: Voltage: 400V Frequency: 50 Hz Current: 63A 24V DC Max. temperature: 350°C Dsdsw U Dcqjpfx Ah Uewd Ideally suited for precise temperature regulation in industrial processes and machine control systems. This proven model supports demanding temperature management in production environments and stands out for its reliable performance under moderate operating conditions. Delivery includes appropriate documentation and, if available, an operating manual.

Year of construction: 2016, condition: good (used), Temperature control unit plasma easytemp 95 Stock No.: 503629 Machine/Device type: Temperature control unit Dwjdpfsxt Nnuox Ah Ued Manufacturer: plasma Model: easytemp 95 Year of manufacture: 2016 Max. operating temperature: 95°C Heating capacity: 6 kW Cooling capacity: 40 kW (80 °C flow / 15 °C cooling water) Heat transfer medium: Water/water

Condition: used, tank capacity: 280 l, GENERAL Design: vertical Remarks: No guarantee on the functionality of the double jacket and agitator (not tested) Outer diameter: 780 mm Inner diameter: 600 mm Heating/Cooling: available Insulation: available Max. overpressure: 2.5 bar Agitator type: disc agitator Number of agitators: 1 agitator Support design: height-adjustable feet Location: outdoor storage Volume: 280 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,000 mm VESSEL Ends: dished ends Number of feet: 3 pieces EQUIPMENT Outlet (alternative input): 32 mm Dsdpfxexqa Tve Ah Uswd MATERIAL SPECIFICATION Feet material: stainless steel

Condition: used, functionality: fully functional, machine/vehicle number: 462958, Temperature control device for plastic injection molding applications and industrial applications up to 250 °C. Technical specifications: Voltage: 400 V Power: 13.7 kW Current: 21 A Volume: 11 liters Flow temperature: 250 °C Frequency: 50 Hz Dimensions: 88x32x96 cm Total weight: 150 kg The Regloplas temperature control device model 250/12/F30/1K/RT45 offers a reliable and precise solution for temperature control in industrial applications. With its compact design, it is ideal for use in tight spaces without sacrificing performance. The device combines advanced heating and cooling systems that enable precise control of the process conditions and thus contribute to the quality assurance of your products. Dwodpfx Aevc Dpcoh Uod The intuitive control ensures easy operation and adaptation to different requirements, while the robust design guarantees a long service life. With fast response times and efficient energy use, the 250/12/F30 not only optimizes your production processes, but also helps reduce operating costs.

Year of construction: 2017, condition: good (used), Temperature control unit plasma easytemp 95 Stock No.: 503628 Dedpfsxt Nm Rsx Ah Uowd Machine/Device type: Temperature control unit Manufacturer: plasma Model: easytemp 95 Year of manufacture: 2017 Max. operating temperature: 95°C Heating capacity: 6 kW Cooling capacity: 40 kW (80 °C supply / 15 °C cooling water) Heat transfer medium: Water

Condition: used, tank capacity: 16,150 l, GENERAL INFORMATION Design: upright/vertical Remarks: Double jacket with sprinkling ring – only suitable for non-pressurized temperature control; in some areas, the welds of the double jackets have partially detached slightly in the upper section Speed: 720 / 1460 rpm External diameter: 2,580 mm Internal diameter: 2,490 mm Total height: 5,000 mm Heating/cooling: available Power: 1.7 / 6.8 kW Max. permissible operating temperature: 150 °C Max. overpressure: 3.2 bar Agitator: Jet stream mixer Mounting type: Feet Location: Bremen Technical documentation: Drawing Cylinder tempering: Double jacket Nameplate: Capacity: 16,150 liters Double jacket volume: 1,000.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI316) Dwjdjxqan Hspfx Ah Usd Condition: used Cylindrical height: 2,500 mm Last application: dairy TANK Max. operating temperature (tank) / °C: 150 °C Number of feet: 3 pcs HEATING / COOLING JACKET Baseplate tempering: Double jacket EQUIPMENT Manway / dome: on top cover (DN 500) Outlet (alternative input): 80 mm MATERIAL SPECIFICATIONS Tempering system material: V4A 1.4571 (AISI316) AGITATOR Agitator manufacturer: Ystral Voltage: 380 Volt Agitator position: side-mounted on cylinder Agitator configuration: Specified agitator data for 2 of the tanks; on one tank, agitator data differs slightly (400 V; 1.8/6.5 kW; 715/1450 rpm – the motor was presumably replaced at some point); some minor dents on the motor covers TECHNICAL DATA / DIMENSIONS Baseplate thickness: 6 mm

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 12500094 0004, Temperature control device for plastic injection molding applications and industrial applications up to 300 °C. Technical specifications: Voltage: 400 V Power: 45.6 kW Circuit diagram No. 40014 Current: 71 A Volume: 24 liters Flow temperature: 300 °C Frequency: 50 Hz Dimensions: 140x60x135 cm Total weight: 60 kg The Regloplas temperature control device model 300LD/20/FM65/1K/RT50 is a state-of-the-art solution for precise temperature control in industrial applications. With a temperature range of up to 50 °C, this device enables reliable and efficient control of process heat. It is ideal for tempering tools, molds and machines to improve product quality and shorten production times. Dedpfx Ajvcp Uksh Uewd The user-friendly control system makes it easy to operate and adjust settings, while the robust design guarantees durability and reliability. Thanks to its compact design, the device can be easily integrated into existing production environments.

Year of construction: 2017, condition: good (used), Temperature control unit plasma easytemp 95 Stock no.: 503627 Machine type/Device type: Temperature control unit Manufacturer: plasma Model: easytemp 95 Year of manufacture: 2017 Max. operating temperature: 95°C Heating capacity: 6 kW Dwedpoxt Nm Djfx Ah Ued Cooling capacity: 40 kW (80°C supply / 15°C cooling water) Heat transfer medium: Water

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17036, overall weight: 350 kg, Temperature control unit from Robamat Technical Data: Voltage: 400V Frequency: 50 Hz Current: 63A 24V DC Max. temperature: 320°C Dwjdpew U Dd Ujfx Ah Usd Perfectly suited for precise temperature regulation in industrial processes and machine control systems. This proven model supports demanding temperature management in production environments and impresses with reliable performance under moderate operating conditions. Supplied with relevant documentation and, if available, an operating manual.

Condition: used, functionality: fully functional, machine/vehicle number: 543235, Temperature control device for plastic injection molding applications and industrial applications up to 300 °C. Technical specifications: Voltage: 400 V Power: 13.5 kW Circuit diagram No. 07007 Dwjdpfx Aovc A Rfjh Usd Current: 21 A Volume: 9 liters Flow temperature: 160 °C Frequency: 50 Hz Dimensions: 99x40x112 cm Total weight: 165 kg The Regloplas temperature control device model 300/12/FM30/1K/RT45 is a powerful and compact solution for precise temperature control in industrial applications. With a high heating and cooling capacity, this device ensures precise temperature control, which makes a decisive contribution to quality assurance in production. The user-friendly control system enables easy handling and adaptation to various process requirements. Thanks to its robust design, the P300/12 is ideal for use in demanding environments. The efficient use of energy and fast response time make it an indispensable tool for companies that value efficiency and reliability.

Condition: used, functionality: fully functional, machine/vehicle number: 470065, Temperature control device for plastic injection molding applications and industrial applications up to 250 °C. Technical specifications: Voltage: 400 V Power: 27.3 kW Current: 42 A Volume: 20.5 liters Dwodpfx Ahsvc Dmno Ujd Flow temperature: 250 °C Frequency: 50 Hz Dimensions: 88x58x96 cm Total weight: 170 kg The Regloplas temperature control device model 250DG/12/FM30/1K/RT45 is a powerful and compact solution for precise temperature control in various industrial applications. With its advanced heating and cooling system technology, it enables precise control of the process conditions, which is crucial for the quality of your products. The user-friendly control ensures easy handling and adaptation to different requirements, while the robust design makes the device ideal for use in demanding environments. Thanks to its fast response times and efficient energy use, the 250DG/12/FM30/1K/RT45 not only contributes to the optimization of your production processes, but also helps to reduce operating costs.

Condition: used, functionality: fully functional, machine/vehicle number: 14947, overall weight: 350 kg, Temperature control unit from Robamat Technical Data: Voltage: 400V Frequency: 50 Hz Current: 63A 24V DC Max. temperature: 320°C Dwsdpfx Asw U Dfroh Ujd Perfectly suited for precise temperature regulation in industrial processes and machine control systems. This proven model supports demanding temperature management in production environments and impresses with reliable performance under moderate operating conditions. Supplied with relevant documentation and, if available, an operating manual.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 801042/01, overall weight: 150 kg, Specification: 3/N/PE/400V 50 Hz 23.5 kW 35.5 A The REMAK TRW 95 EWR 22.5 temperature control unit is a reliable solution for precise control of temperatures in industrial processes. It enables uniform heating or cooling of tools, components, or media to ensure optimal production conditions. The device is characterized by its easy operation, robust construction, and high efficiency, making it a durable and low-maintenance addition in various manufacturing environments. Dwjdpfjwrcl Tsx Ah Ued

Condition: used, functionality: fully functional, machine/vehicle number: 543152, Temperature control device for plastic injection molding applications and industrial applications up to 300 °C. Technical specifications: Voltage: 400 V Dwodpfx Ahsvc A Anj Usd Power: 13.5 kW Circuit diagram No. 07007 Current: 21 A Volume: 9 liters Flow temperature: 300 °C Frequency: 50 Hz Dimensions: 99x40x112 cm Total weight: 165 kg The Regloplas temperature control device model 300/12/FM30/1K/RT45 is a powerful and compact solution for precise temperature control in industrial applications. With a high heating and cooling capacity, this device ensures precise temperature control, which makes a decisive contribution to quality assurance in production. The user-friendly control system enables easy handling and adaptation to various process requirements. Thanks to its robust design, the P300/12 is ideal for use in demanding environments. The efficient use of energy and fast response time make it an indispensable tool for companies that value efficiency and reliability.

Condition: used, functionality: fully functional, machine/vehicle number: 470066, Temperature control device for plastic injection molding applications and industrial applications up to 250 °C. Technical specifications: Voltage: 400 V Power: 27.3 kW Dwedpfx Ahjvc Dmue Uod Current: 42 A Volume: 20.5 liters Flow temperature: 250 °C Frequency: 50 Hz Dimensions: 88x58x96 cm Total weight: 170 kg The Regloplas temperature control device model 250DG/12/FM30/1K/RT45 is a powerful and compact solution for precise temperature control in various industrial applications. With its advanced heating and cooling system technology, it enables precise control of the process conditions, which is crucial for the quality of your products. The user-friendly control ensures easy handling and adaptation to different requirements, while the robust design makes the device ideal for use in demanding environments. Thanks to its fast response times and efficient energy use, the 250DG/12/FM30/1K/RT45 not only helps optimize your production processes, but also helps reduce operating costs.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 18269, overall weight: 350 kg, Temperature control unit by Robamat Technical data: Voltage: 400V Frequency: 50 Hz Current: 63A Max. temperature: 320°C Dedpfx Ahew U A Tue Ujwd Robamat 4212 temperature control unit. Ideal for precise temperature regulation in industrial processes and machinery control systems. This proven device supports demanding temperature management in production environments and delivers reliable performance under moderate operating conditions. The system comes complete with the relevant documentation and, where available, an operating manual.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 18576, overall weight: 350 kg, Temperature control unit from Robamat Dwodew U Ddhspfx Ah Usd Technical Data: Voltage: 400V Frequency: 50 Hz Current: 63A 24V DC Max. temperature: 320°C Perfectly suited for precise temperature regulation in industrial processes and machine control systems. This proven model supports demanding temperature management in production environments and impresses with reliable performance under moderate operating conditions. Supplied with relevant documentation and, if available, an operating manual.