Used material testing for sale (497)

Year of construction: 2018, condition: excellent (used), DYCOMETAL CRT2VT-180 Thermal Shock Test Chamber Manufacturer: DYCOMETAL EQUIPOS CONTROL CALIDAD, S.L. Type: CRT2VT-180 Year of Manufacture: 2018 Machine Type: Thermal Shock Test Chamber Temperature Range: 0 °C to +200 °C For sale is a used DYCOMETAL CRT2VT-180 thermal shock test chamber with a 2-chamber system and a movable test specimen carrier/cradle. The system was designed for thermal shock testing and rapid temperature changes and is ideally suited for electronics and component testing, material testing, research and development, and quality assurance. Technical Data: Model: CRT2VT-180 Year of Manufacture: 2018 Protection Class: IP22 Temperature Range: 0 °C to +200 °C Power Supply: 400 V / 3N~PE / 50 Hz Power: 5.32 kW Rated Current: 11.51 A Refrigerant: R134a Refrigerant Quantity: 3.4 kg GWP: 1,430 CO₂ Equivalent: 4.86 t Max. Pressure High/Low Side: 21 / 9.8 bar Test Pressure High/Low Side: 23.5 / 10.6 bar Controller: EUROTHERM 2604 Max. Controlled Cradle Travel: 500 mm Testing System: 2-chamber thermal shock system Movable test specimen carrier/cradle Automatic and manual operation Manual cradle up/down control Upper temperature-controlled test area Lower water-based test area Pneumatically operated test specimen carrier Inductive minimum/maximum water level detection Equipment: EUROTHERM 2604 temperature control PLC display Ethernet communication Test probe entry port Pneumatic connection Water inlet Water outlet Interior lighting Emergency stop Dcolhcdozzbwwow Hsl Alarm reset Stainless steel test chamber Existing operating manuals Documentation and software CD Dimensions: Overall dimensions (L × W × H): to be measured Transport Data: Dimensions (L × W × H): to be measured Weight: 750 kg Transport by freight forwarder Condition: Used Optical condition as shown in the pictures. Scope of Delivery: DYCOMETAL CRT2VT-180 thermal shock test chamber EUROTHERM 2604 controller Existing operating manuals Documentation and software CD Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown. Subject to changes, errors and prior sale.

Year of construction: 2018, condition: excellent (used), Vötsch VT³ 7012 S2 Temperature Shock Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Year of Construction: 2018 Machine Type: Temperature Shock Test Chamber / 2-Chamber Shock Test System Test Chamber Volume: 125 liters For sale is a used Vötsch VT³ 7012 S2 temperature shock test chamber with a 2-chamber system and programmable touch panel control. The system was developed for rapid and abrupt temperature changes and is particularly suitable for Environmental Stress Screening (ESS), environmental simulation, electronics and component testing, research and development, as well as quality assurance. The test specimen is transported between the hot and cold chambers via a vertically moving transport carriage. Technical Data: Temperature Range, Hot Chamber: +50 °C to +220 °C Temperature Range, Cold Chamber: -80 °C to +70 °C Test Chamber Volume: 125 liters Number of Chambers: 2 Max. Test Weight / Carriage Load: 50 kg Refrigeration Unit: water-cooled Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 10 kW Rated Current: 25 A Refrigerant: Refrigerant 1: R449A Refrigerant Quantity: 1.70 kg GWP: 1,397 CO₂ Equivalent: 2.37 t Max. Low Pressure: 22.5 bar g Max. High Pressure: 25 bar g Refrigerant 2: R23 Refrigerant Quantity: 1.27 kg GWP: 14,800 CO₂ Equivalent: 18.80 t Max. Low Pressure: 22.5 bar g Max. High Pressure: 25 bar g Standby Pressure: 14 bar g Dimensions: Test Chamber (W × D × H): 470 × 650 × 410 mm External Dimensions (W × D × H): 970 × 2,350 × 1,985 mm Required Room Height for Operation: approx. 2,450 mm Equipment: 2-chamber temperature shock system Vertically moving transport carriage Programmable touch panel control CONTROLPAD for status display Observation window Dslhcdwezzazuo Hscl Test chamber lighting Cable gland Water-cooled refrigeration unit Automated and programmable defrost cycles Operating hour counter Cycle counter / Remaining time display USB and Ethernet interfaces Application Areas: Temperature shock testing Environmental Stress Screening (ESS) Environmental simulation Electronics and component testing Assembly testing Material testing Quality assurance Research and development Reliability testing Life and stress tests Transport Data: Dimensions (L × W × H): approx. 2,350 × 970 × 1,985 mm Weight: to be determined Transport by freight forwarder Condition: Used Optical condition as shown in the pictures. Scope of Supply: Vötsch VT³ 7012 S2 temperature shock test chamber Touch panel control Equipment and accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber -70 °C to +180 °C | Year of Manufacture 2018 Description: For sale is a high-quality climate testing chamber from Vötschtechnik GmbH, model ClimeEvent C/340/70/5, year of manufacture 2018. This unit is suitable for demanding temperature and climate tests in laboratories, research institutions, development departments, and industrial quality assurance. Thanks to the large test chamber, the powerful refrigeration unit, and the precise temperature and humidity control, the system is ideal for material, electronics, and long-term testing. The water-cooled design ensures reliable operation even under high power requirements. Technical Data Manufacturer: Vötschtechnik GmbH Model: ClimeEvent C/340/70/5 Type of Equipment: Climate Testing Chamber / Temperature Testing Chamber Year of Manufacture: 2018 Test Chamber Volume: approx. 340 liters Temperature Range: -70 °C to +180 °C Temperature Change Rate: Heating: approx. 7 K/min Cooling: approx. 6.7 K/min Maximum Heat Compensation: approx. 3,000 W Temperature Deviation (over time): ±0.1 to ±0.5 K Temperature Homogeneity: ±0.5 to ±1 K Temperature Gradient: ≤2 K Climate Range: Temperature: +10 °C to +95 °C Humidity: 10 to 98 % RH Dew Point: -3 °C to +94 °C Refrigerant: R449A – 2.50 kg R23 – 0.75 kg Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Sound Pressure Level: approx. 57 dB(A) Design: Water-cooled Dimensions (approx.): External: 1,830 × 900 × 1,890 mm (H × W × D) Internal: 750 × 580 × 765 mm (H × W × D) Weight: approx. 650 kg Equipment: Color touchscreen control Stainless steel test chamber Delhcdezzag Dew Hscl Internal lighting Large viewing window Water-cooled refrigeration unit Side cable entry Multiple shelf levels Ethernet interface USB interface Extensive accessories as shown in the photos Areas of Application Temperature testing Climate testing Environmental simulation Material testing Electronics testing Automotive Aerospace Research & Development Quality assurance Aging and stress tests Condition Used. The unit is in good condition with normal signs of wear and tear, consistent with its age. Scope of Supply: Vötschtechnik ClimeEvent C/340/70/5 Accessories as shown in the pictures Service Shipping: Inspection is possible at any time by appointment. Loading onto a truck can be arranged. Europe-wide shipping by freight forwarder is possible for an additional charge. Subject to prior sale and errors.

Condition: used, Thermotron AST-18 HALT/HASS Test Chamber Manufacturer: Thermotron Industries Dslhcdjzyndbow Hscl Model: AST-18 Controller: AST-8800 Machine Type: HALT/HASS Test Chamber / Accelerated Stress Test System For sale is a Thermotron AST-18 HALT/HASS test system for combined temperature and repetitive shock/vibration testing. The system enables accelerated stress testing of components and assemblies through extreme temperature changes in combination with multi-axis vibration excitation. Operation and monitoring are performed via the Thermotron AST-8800 controller. Technical Data: Temperature Range: -100 to +200 °C Temperature Change Rate: >50 °C/min at the test specimen Vibration Frequency: 0 to >10,000 Hz Vibration Axes: 3 linear + 3 rotational / 6 degrees of freedom Max. Payload Test Table: 135 kg Airflow Rate: 1,400 CFM / approx. 2,379 m³/h Grid Dimension: approx. 102 × 102 mm Voltage Supply: 400 V / 3 Ph / 50 Hz Max. Current according to Nameplate: 65.3 A Heating Power according to Nameplate: 20 kW AST-8800 Controller: Windows-based user interface Combined temperature and vibration display PSD / Power Spectral Density Data recording and data storage Vibration alarm and shutdown limits Ethernet / Web access User management Monitoring of operating and maintenance times Test Chamber: W × D × H: approx. 838 × 864 × 762 mm Test Chamber Volume: approx. 0.55 m³ / 550 liters Vibration Table: Manufacturer's table size depending on the configuration: approx. 610 × 610 to 711 × 711 mm Impactors: 4 or 5, depending on the design Dimensions: Move-In Dimensions W × D × H: approx. 2,286 × 1,448 × 2,210 mm Footprint: approx. 2.29 × 1.45 m Equipment: Thermotron AST-8800 controller Repetitive shock/vibration table Temperature test chamber Acceleration sensors Temperature measurement technology Safety and monitoring functions Condition: Used Optical condition as shown in the pictures. Calibration valid until 30.11.2024, currently expired. Scope of Delivery: Thermotron AST-18 HALT/HASS test system AST-8800 controller RS-28 unit Scope of delivery and accessories as shown in the pictures. Shipping Data: Dimensions: approx. 2,286 × 1,448 × 2,210 mm Weight: approx. 1,000 kg (estimated) Shipping via freight forwarder possible. Availability: upon agreement. Subject to changes, errors and prior sale.

Condition: excellent (used), DEWETRON DEWE3-PA8-RM Power Analyzer Manufacturer: DEWETRON System: DEWE3-PA8-RM Chassis Type Plate: DEWE3-RM8 Revision: 1.1 Device Type: High-End Power Analyzer Design: Stationary 19" Rack-Mount Power Analyzer Country of Manufacture: Austria For sale is a professional DEWETRON DEWE3-PA8-RM Power Analyzer in a 19" rack-mount design, with a built-in TRION3-1810M-PA power module, as well as the connection and measurement accessories shown in the pictures. This modular measuring system is designed for highly precise power analysis and integration into test benches. Typical applications include electric drives, inverters, energy storage systems, e-mobility, power electronics, as well as research and development test benches. Technical data: System: DEWE3-PA8-RM TRION(3) slots: 8 Installed power module: TRION3-1810M-PA Current configuration: 4-phase power analysis Measurement channels power module: 4 x voltage / 4 x current Sampling rate: up to 10 MS/s per channel Basic accuracy power analysis: 0.04% High voltage inputs: 4 x U1–U4 Voltage measurement range power module family: up to 1000 V RMS / ±2000 V Peak Safety category: CAT III 1000 V Supply: 100–240 V AC Frequency: 50–60 Hz Power consumption according to type plate: 500 W Sensor supply: Integrated redundant sensor supply ±15 V / 5 A +9 V / 0.6 A 8 sensor connections Equipment: TRION3-1810M-PA power module 4 high-voltage measuring inputs U1–U4 4 current / measuring channels I1–I4 CNT1 / CNT2 TRIG DC / AUX / Digital I/O SYNC IN / SYNC OUT Integrated industrial PC Interchangeable drive bays Ethernet / LAN USB interfaces COM1 / COM2 Display interfaces Free TRION(3) slots for expansion Application areas: Power analysis and power measurement Test bench technology Electric motors and electric drives Inverter and converter testing Battery and energy storage testing E-mobility / Automotive Power electronics Research and development Dimensions: Dimensions: 442 x 435 x 222 mm Weight: 15.8 kg Condition: Used Device can be switched on. Optical condition as shown in the pictures. Scope of supply: 1 x DEWETRON DEWE3-PA8-RM / DEWE3-RM8 1 x built-in TRION3-1810M-PA power module Measurement, sensor, and connection cables as shown in the pictures 2 x brackets as shown in the pictures Otherwise, scope of supply as shown in the pictures Dolhszyl Sijcdw Hecl Shipping via UPS freight possible. Availability: upon agreement. Subject to changes, errors and prior sale.

Condition: good (used), UNHOLTZ-DICKIE / HS-Simulators Vibration Test System Manufacturer: UNHOLTZ-DICKIE Corporation / HS-Simulators Horstmann GmbH Type: TA117SA-560 + HS 520 K 60 V For sale is a complete electrodynamic vibration test system consisting of an UNHOLTZ-DICKIE shaker, model 560, a SALL50F power amplifier, a VWIN II control/regulation system, and an HS-Simulators climate test chamber, HS 520 K 60 V. Suitable for vibration and shock tests, as well as combined vibration, temperature, and environmental simulation tests. Technical Data Shaker: Model: 560 System: TA117SA-560 Design: Air-cooled electrodynamic shaker Sine force: 6000 lbf peak / 26.7 kN peak Random force: 5200 lbf RMS / 23.1 kN RMS Max. acceleration of free table: 100 g / 981 m/s² Shaker stroke: 1 inch / 25.4 mm Axial resonance frequency: approx. 2200 Hz / 2.2 kHz Armature effective weight: 45 lb / approx. 20.4 kg Driver coil: 200 A Sine / 140 A Random Cooling: Air Power Amplifier: Type: SALL50F Power Amplifier Power Module: PML-50-S Master Controller: MCLL50 Supply: 400 V / 3 phases / 50 Hz Amplifier / Field supply: 41 kVA / 60 A Shaker blower: 15 kVA / 22 A Total system: 56 kVA / 82 A Max. driver current: 440 A RMS OUT SINE 300 A RMS OUT RANDOM Control / Regulation: VWIN II DSP Vibration Control System Control Console: MA117SA-560 Charge Amplifier: Type 122P DSP-based real-time control 4 input channels, expandable to 8 or 16 2 output channels Interfaces: TCP/IP, RS232, USB, Ethernet, Digital I/O Test types according to documentation: Random Vibration, Sine Vibration, Resonance Dwell, Classical Shock Pulse, SRS Shock & Analysis, Sine-on-Random, Random-on-Random, Gunfire, Long Time History Control, Signal Analyzer / Transient Capture HS-Simulators Climate Test Chamber: Type: HS 520 K 60 V Year of construction: 1988 Temperature range: -60 °C to +180 °C Connection: 380 V / 17 A / 10 kW Refrigerant according to nameplate: R13 / R502 Dimensions: Power Amplifier: approx. 537 x 825 x 1000 mm (W x D x H) Climate test chamber: approx. 1200 x 1800 x 2000 mm (W x D x H) Estimated total weight of the system offered, excluding separate control cabinet: approx. 2,200 – 2,800 kg Shipping dimensions and actual shipping weight will be determined separately for the shipping inquiry. Equipment / Scope of delivery: UNHOLTZ-DICKIE shaker, model 560 SALL50F power amplifier VWIN II control/regulation system Control Console Charge Amplifier Shaker blower HS-Simulators climate test chamber HS 520 K 60 V Industrial PC / Monitor Original system documentation and accessories as described Condition: Used Industrial system from commercial use. Optical condition as shown in the pictures. Functionality not fully tested. Dslhcdwoy S S Eio Hocl Inspection is possible and desired after prior appointment. Transport only by a suitable freight forwarder. Loading and collection possible by arrangement. Subject to changes, errors and prior sale.

Condition: excellent (used), Walter+Bai LFV100-HH Servo-hydraulic Universal Testing Machine Manufacturer: Walter+Bai AG, Switzerland Type: LFV100-HH Year of Manufacture: 2019 Machine Type: Servo-hydraulic Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a used servo-hydraulic universal testing machine from Walter+Bai AG, including the PAC-40 hydraulic unit, PCS8000 digital controller, industrial PC, original Walter+Bai testing software, software dongle, GTM load cell, and extensive accessories. The system is suitable for professional tensile, compressive, material, and component testing in testing laboratories, research and development, quality assurance, and industrial manufacturing. The original Walter+Bai testing software, the associated software dongle, and the industrial PC are included in the scope of delivery. This provides a complete operating and evaluation system for the testing machine. Technical Data: Manufacturer: Walter+Bai AG, Switzerland Model: LFV100-HH Machine Type: Servo-hydraulic Universal Testing Machine Series: LFV 100 kN Factory Number: 2279 Order Number: K29788 Year of Manufacture: 2019 Maximum Testing Force: 100 kN Control System: Walter+Bai PCS8000 Digital Controller Digital Testing Machine Control System Original Walter+Bai Testing Software Available Original Software Dongle Available Industrial PC Included in Scope of Delivery Load Cell: Manufacturer: GTM Testing and Metrology GmbH Type: DR-F Measuring Range: 125 kN Sensitivity: 2 mV/V Serial Number: 68134 Year of Manufacture: 2019 Made in Germany Hydraulic Unit: Manufacturer: Walter+Bai AG Type: PAC-40 Factory Number: 2279-1 Year of Manufacture: 2019 Servo-hydraulic Hydraulic Unit Water-cooled Version Designed for Continuous Operation PCS8000 Digital Controller Mounted Dimensions: Testing Machine (W × D × H): approx. 1,200 × 1,245 × 3,378 mm Hydraulic Unit PAC-40 (W × D × H): approx. 800 × 1,250 × 1,650 mm Weight: Testing Machine: approx. 2,500 kg Hydraulic Unit PAC-40: approx. 980 kg Clamping System: 2 × Mechanical Wedge Grips Walter+Bai WGR-100-M Several Sets of Gripping Jaws Clamping and Mounting Accessories as Shown in Pictures Equipment: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Unit Walter+Bai PCS8000 Digital Controller Dcolhszlz Rxocdw Hsl Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × Mechanical Wedge Grips WGR-100-M Several Sets of Gripping Jaws Handheld Control Unit Separate Control Unit with Emergency Stop Testing and Mounting Accessories as Shown in Pictures Condition: Used Year of Manufacture 2019 Optical Condition as Shown in Pictures Scope of Delivery: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × Mechanical Wedge Grips WGR-100-M Sets of Gripping Jaws Handheld Control Unit Control Unit Other Accessories as Shown in Pictures Scope of delivery as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material analysis Testing of tensile strength, bond tensile strength, and shear strength of masonry and wood connections, etc. - Nail pull-out test - Compression test on cement and mortar prisms - Bending test on cement and mortar specimens - Compaction test - Bending test on wood and concrete - Shear strength test on wood - Splitting test on wood - Scaffolding connection test - Shear strength test on walls - Tensile test on walls - Tensile test on structural steel - Tensile test on wood - Pull-out test on structural steel - Reversal bending test on structural steel - Anchor pull-out test - Bond tensile test Dcslhcdwsxmv H Ro Hol I have made a video demonstrating the function of the testing machine. I can send this video to a mobile number via WhatsApp or Signal! Shipping and loading are possible at my warehouse!

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FA005TN.A50.002 Article No. Base Machine: 1004473 Z005 TN AllroundLine Table-Top The system is a comprehensively equipped ZwickRoell Z005 TN AllroundLine tabletop testing machine. The system has been specifically configured for mechanical and functional testing of automotive injectors and injection systems. In addition, the system features pneumatic sample holders, a visual color recognition system, and a precision scale, as well as extensive product-specific accessories. Technical data: Testing machine: Maximum testing force of the load frame: 5 kN Total testing space height: 1,164 mm Testing space height at the bottom without attachments: 1,030 mm Testing space height at the top without attachments: 1,015 mm Testing space width: 440 mm Crosshead speed: 0.0005 to 3,000 mm/min Return speed: max. 3,000 mm/min Deviation of the drive speed: max. 0.05 % Drive stroke resolution: 0.959431 nm Positioning repeatability: ±2 µm Control: adaptive Control cycle: 1,000 Hz Load cell: Type: Xforce HP Rated force: 0.5 kN / 500 N Suitable for static and dynamic tensile and compressive forces Accuracy class 1 from 1 N Accuracy class 0.5 from 5 N Maximum operating force: 150 % of the rated force Limit force: 150 % of the rated force Breaking force: 300 % of the rated force Protection class: IP54 Connection thread: M28 × 1.5 Djlhozwvu Necdw Hjcl Connection pin: Ø 20 mm Measuring and control electronics: ZwickRoell testControl II machine electronics DCSC measuring module for strain gauge load cells Measured value acquisition rate: 400 kHz Measured value transmission to PC: 500 Hz Automatic zero point correction Measured signal time correction Ethernet interface to PC Measuring amplifier for strain gauge full bridges Measuring range: 0.2 to 165 % of the rated measured value Measured value acquisition rate of the DCSC module: max. 10 kHz Force measurement technology according to ISO 7500-1 and ASTM E4 Testing device for automotive injectors: Article No.: 3002956 Maximum testing force: 200 N Dimensions: approx. 396 × 235 × 309 mm Weight: approx. 20 kg Pneumatic sample holders: Article No.: 3001461 Maximum testing force: 200 N Maximum opening width: 40 mm Closes on both sides and symmetrically Interchangeable clamping jaws Dimensions of the load frame: Height without base profiles: 1,314 mm Height with base profiles: 1,528 to 2,108 mm Width without base profiles: 680 mm Width with base profiles: 856 mm Width including machine electronics: 1,044 mm Depth with base profiles: 650 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 161 kg Base profiles: approx. 31 kg Machine with typical attachments: approx. 226 kg + Laser measuring system / visual color recognition system from Keyence + Precision scale: Article No.: 085770 Maximum load: 220 g Readability: 0.1 mg Repeatability at 200 g: 0.1 mg Linearity: 0.25 mg RS232 interface for data transmission Separate weighing cell, display unit and operating terminal + PC with ZwickRoell testXpert III testing software, version 1.2 + Microphone and many other accessories shown in the pictures Condition: used Optical condition according to the pictures Functional scope according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Shipping or freight shipping is possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Delhcdwszwvtxj Hjcl Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Year of construction: 2013, condition: excellent (used), Temperature Test Chamber VTS³ 7160-5 H Water-cooled For sale is a used temperature test chamber from the manufacturer Vötsch. The test chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Type: VTS³ 7160-5 H Equipment type: Temperature test chamber Test chamber volume: approx. 1568 liters Test chamber dimensions: approx. 1100 x 950 x 1498 mm (W x D x H) Housing dimensions: approx. 1300 x 2635 x 2013 mm (W x D x H) Weight: approx. 1700 kg Temperature range: -70 °C to +180 °C Delhezv S Hfscdw Hjcl Temperature change rate (heating): approx. 5 K/min Temperature change rate (cooling): approx. 4 K/min Max. heat compensation: approx. 5000 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.1 to ± 2.0 K Refrigerant: R404A Refrigerant quantity: 5.20 kg ND max.: 18 bar g HD max.: 25 bar g Refrigerant: R23A Refrigerant quantity: 1.30 kg ND max.: 18 bar g HD max.: 25 bar g Cooling water consumption under full load at Temperature difference Dt = 10 K: 2.2 m3/h Temperature difference Dt = 5 K: 4.4 m3/h Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.6 kW Rated current: 32 A Features Touch panel operation Interior made of stainless steel Side access ports Test chamber equipment as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to pictures Scope of delivery 1x Vötsch VTS³ 7160-5 H temperature test chamber Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight transport possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: like new (used), Hardy Type: Hardy TH453-W2E-II Never used (exhibition piece) Water-cooled Here we offer an unused Hardy duplex climate chamber for temperature and humidity testing. The system has two test chambers arranged in a common housing. Both test chambers can be operated independently. This allows two different tests to be carried out simultaneously. The climate chamber is prepared for testing with lithium-ion batteries and is particularly suitable for batteries from power tools, e-bikes, and comparable applications. Technical data Number of test chambers: 2 Operation of the test chambers: independently of each other Test chamber volume: approx. 300 liters per test chamber Test chamber dimensions per test chamber: 850 × 600 × 600 mm, width × depth × height External dimensions: 1,150 × 2,115 × 1,922 mm, width × depth × height Temperature range: -45°C to +100°C Temperature deviation: Dcjlezv Rrmjhcdw Hel ±0.5°C Temperature change according to data sheet: Heating rate ≥ 2°C from +25°C to +100°C, empty and non-linear Cooling rate ≥ 2°C from +25°C to -45°C, empty and non-linear Humidity range: 20% RH to 98% RH Temperature range during humidity operation: +20°C to +85°C Condition: New Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Type: ARS-1100-AE Temperature and climate testing chamber with humidity control Air-cooled Temperature and humidity chamber Temperature range: -70°C to +180°C Rate of temperature change up to 5 K/min. Humidity range: 10 to 98% RH Internal dimensions: 1100 W x 1000 H x 1000 D mm External dimensions: 1300 W x 1955 H x 2005 D mm Approx. 1100 liters AC 400 V 3-phase, 50 Hz, 29 A Weight: approx. 765 kg Dslhcdezvdk Njw Hecl Refrigerant: R404A and R23 For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) We would be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Door glass present Interior dimensions: Width: 340 mm Height: 355 mm Depth: 360 mm Rated temperature: 500° C Dcjlhoyk Et Nocdw Hsl

Year of construction: 2016, condition: excellent (used), Type: ETS MPA409/M437A HP-3A For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Vibration test system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. Displacement Continuous (deflection) 51 mm Max. Displacement at shock 51 mm Max. Vibration velocity (sine) 1.8 m/s Max. Acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without payload 2,250 (Hz ± 5%) Max. static payload weight 500 kg Axial frequency of the vibration isolation < 5 Hz Flux density < 1 mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Amplifier MPA409 - Output power approx. 40 kW - Amplifier efficiency > 90% - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 2 to 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (without grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Design with ground-isolated ground to avoid ground loop problems Scope of delivery: (See picture) Condition: Used Signs of wear and tear due to age and use Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. Dcjlezu Nxijhcdw Hel We will be happy to answer any further questions by telephone.

Condition: used, Technical details: Djlszi R R Ashcdw Hecl traction force: 250 kN control: SCHENCK HYDROPULS PSB dayligth: 1000 - 1200 je nach Spannwerkzeug /acc. clamp.tool mm piston stroke: 180mm mm A servo-hydraulic leaf spring testing machine with Series 65 digital electronics is designed for testing leaf springs used in commercial vehicles, railway vehicles, and industrial applications. A hydraulic actuator applies defined loads while force, displacement, and, if required, strain are measured. Typical tests: ·Static spring characteristic (force-displacement curve) ·Fatigue and endurance testing ·Cyclic load testing ·Service life testing ·Tensile and compression testing ·Production quality control *

Year of construction: 2018, condition: excellent (used), functionality: fully functional, BINDER MKF240 Climate Test Chamber – 247 Liters | -40 °C to +180 °C | 10 % to 98 % RH For sale is a high-quality Binder MKF240 Climate Test Chamber in well-maintained condition. The unit is designed for demanding climate and temperature testing applications in research, development, quality assurance, and industrial environments. With an internal volume of approximately 247 liters, a temperature range of -40 °C to +180 °C, and a humidity range of 10 % to 98 % RH, the MKF240 is ideally suited for environmental simulation, temperature cycling, aging studies, material testing, and reliability testing. The stainless-steel interior and efficient air circulation system ensure uniform temperature and humidity distribution throughout the chamber. The integrated viewing window allows continuous observation of test specimens during operation. Technical Data Manufacturer: Binder GmbH Model: MKF240 Type: Climate Test Chamber Temperature Range: -40 °C to +180 °C Humidity Range: 10 % to 98 % RH Internal Volume: Approx. 247 Liters Stainless-Steel Interior Dynamic Air Circulation System Viewing Window Programmable Controller Made in Germany Applications Electronics Industry Automotive Industry Aerospace Industry Material Testing Research & Development Quality Assurance Reliability and Aging Tests Key Benefits ✓ Combined temperature and humidity testing ✓ Precise environmental control ✓ Excellent temperature and humidity uniformity ✓ Robust industrial construction ✓ Ideal for laboratory and production environments Dcolozdqytshcdw Hsl Condition The unit is in good used condition. Inspection and functional testing are welcome by appointment. Additional photographs and technical information are available upon request.

Condition: excellent (used), functionality: fully functional, WEISS C-340/70 CLIMATE TEST CHAMBER – 340 LITERS | -70 °C TO +180 °C For sale is a high-quality Weiss Umwelttechnik C-340/70 Climate Test Chamber in very good condition. The chamber is designed for demanding environmental simulation, temperature cycling, quality assurance, research, and development applications. With an internal volume of approximately 340 liters and a temperature range from -70 °C to +180 °C, the unit is ideally suited for material testing, thermal cycling, aging studies, and qualification testing of electronic and mechanical components under extreme environmental conditions. The stainless-steel workspace features multiple shelf positions and a powerful air circulation system to ensure uniform temperature distribution throughout the chamber. The integrated touchscreen controller provides simple and intuitive operation. TECHNICAL DATA • Manufacturer: Weiss Umwelttechnik GmbH • Model: C-340/70 • Year of Manufacture: 2008 • Temperature Range: -70 °C to +180 °C Dolhcdwezdqhde Hscl • Internal Volume: Approx. 340 Liters • Nominal Power: 4.4 kW • Nominal Current: 13.0 A • Power Supply: 3/N/PE AC 400 V ±10 %, 50 Hz • Refrigerant R404A: 2.5 kg • Refrigerant R23: 0.65 kg • Max. Low Pressure: 19 bar(g) • Max. High Pressure: 25 bar(g) • Static Pressure: 9.5 bar(g) • Stainless-Steel Interior • Dynamic Air Circulation System • Large Viewing Window • Touchscreen Controller APPLICATIONS • Electronics Industry • Automotive Industry • Aerospace Industry • Material Testing • Research & Development • Quality Assurance KEY BENEFITS ✓ Temperature testing down to -70 °C ✓ Precise temperature control ✓ Excellent temperature uniformity ✓ Proven industrial quality ✓ Robust and durable construction ✓ Suitable for continuous operation CONDITION The unit is in very good used condition. The interior is clean, shelving racks are installed, and the chamber presents itself in excellent overall condition. Inspection and functional testing are welcome by appointment.

Condition: excellent (used), functionality: fully functional, VÖTSCH VC7034 CLIMATE TEST CHAMBER – 340 LITERS | -40 °C TO +180 °C AVAILABLE IN AIR-COOLED OR WATER-COOLED VERSION For sale is a Vötsch VC7034 Climate Test Chamber in very good condition. The chamber is designed for professional environmental simulation, temperature cycling, quality assurance, research and development, and reliability testing applications. With an internal volume of approximately 340 liters and a temperature range from -40 °C to +180 °C, the unit is suitable for testing electronic components, automotive parts, aerospace applications, materials, and industrial products under controlled environmental conditions. The chamber features a stainless-steel workspace, dynamic air circulation system, large observation window, and user-friendly touchscreen controller. These features ensure reliable and repeatable test results while providing excellent accessibility and ease of operation. TECHNICAL DATA • Manufacturer: Vötsch Industrietechnik • Model: VC7034 • Type: Climate Test Chamber Dslhcjzdpvajdw Hscl • Temperature Range: -40 °C to +180 °C • Internal Volume: Approx. 340 Liters • Stainless-Steel Interior • Dynamic Air Circulation • Large Viewing Window • Touchscreen Controller APPLICATIONS • Electronics Industry • Automotive Industry • Aerospace Industry • Material Testing • Research & Development • Quality Assurance AVAILABLE VERSIONS AIR-COOLED VERSION The air-cooled version requires only a power connection and can be installed without additional infrastructure. Heat is dissipated directly into the surrounding air, making this version ideal for laboratories, workshops, and production facilities. Advantages: ✓ No cooling water connection required ✓ Easy and cost-effective installation ✓ Ready for immediate operation ✓ Flexible placement options WATER-COOLED VERSION The water-cooled version is connected to an external cooling water system. Heat is removed through a water-cooled condenser, reducing heat emission into the installation area. This configuration is particularly suitable for continuous operation and industrial environments. Advantages: ✓ Reduced heat load in the installation area ✓ Higher efficiency during continuous operation ✓ Ideal for 24/7 operation ✓ Suitable for industrial testing facilities CONDITION The unit is in very good used condition. The interior is clean, shelving racks are present, and the chamber is well maintained. Inspection and functional testing are welcome by appointment. Loading assistance can be provided if required. Additional photographs, technical information, and pricing are available upon request.

Year of construction: 2010, operating hours: 18,766 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 58566150370010, VÖTSCH VC7018 CLIMATE TEST CHAMBER – INDUSTRIAL QUALITY FOR PRECISE TEMPERATURE AND HUMIDITY TESTING Delhcozdp Tledw Hjcl For sale is a high-quality Vötsch VC7018 Climate Test Chamber in very good condition. The unit is ideally suited for demanding temperature and humidity testing applications in research, development, quality assurance, and industrial environments. Vötsch is one of the world's leading manufacturers of environmental simulation and testing equipment, renowned for precision, reliability, and long service life. The VC7018 has been designed for reproducible climate and temperature testing and provides excellent temperature and humidity uniformity throughout the test chamber. The spacious stainless-steel workspace offers ample room for a wide range of test specimens and applications. Its powerful air circulation system ensures homogeneous climate conditions and reliable test results. The intuitive touchscreen controller allows simple and user-friendly operation. TECHNICAL FEATURES • Manufacturer: Vötsch Industrietechnik • Model: VC7018 • Type: Climate Test Chamber • Temperature Range: -70 °C to +180 °C • Humidity Range: 10 % to 98 % RH • Stainless-Steel Interior • Dynamic Air Circulation System • Large Viewing Window • Touchscreen Controller • Heavy-Duty Industrial Design • Suitable for Continuous Operation APPLICATIONS • Electronics Industry • Automotive Industry • Aerospace Industry • Material Testing • Research & Development • Quality Assurance • Aging and Reliability Testing KEY BENEFITS ✓ Precise temperature and humidity control ✓ Excellent climate uniformity throughout the chamber ✓ High-quality stainless-steel workspace ✓ User-friendly operation ✓ Robust and durable construction ✓ Ideal for laboratory and production environments ✓ Proven Vötsch technology and reliability CONDITION The unit is in very good used condition. The interior is clean and the chamber is in overall excellent condition. Inspection and functional testing are welcome by appointment.

Year of construction: 1999, condition: excellent (used), functionality: fully functional, machine/vehicle number: 59566005650010, VÖTSCH VC4060 CLIMATE TEST CHAMBER – INDUSTRIAL QUALITY FOR ENVIRONMENTAL SIMULATION For sale is a high-quality Vötsch VC4060 Climate Test Chamber in well-maintained condition. The unit has been designed for demanding climate and temperature testing applications in research, development, quality assurance, and industrial environments. Vötsch is one of the world's leading manufacturers of environmental simulation equipment and is renowned for precision, reliability, and long-term durability. The VC4060 is ideally suited for material testing, aging studies, reliability testing, and qualification of electronic and mechanical components under controlled environmental conditions. Dcjlhezdqmgjcdw Hjl The stainless-steel interior, efficient air circulation system, and robust industrial construction ensure uniform temperature distribution and repeatable test results. The integrated viewing window allows continuous observation of test specimens during operation. TECHNICAL DATA • Manufacturer: Vötsch Industrietechnik / Weiss Umwelttechnik GmbH • Model: VC4060 • Year of Manufacture: 1999 • Unit No.: 59566005650010 • Power Supply: 3/N/PE AC 400 V ±10 %, 50 Hz • Nominal Power: 7.8 kW • Nominal Current: 15 A • Refrigerant: R452A, 3.5 kg • Max. Low Pressure: 18 bar(g) • Max. High Pressure: 25 bar(g) • System Plan No.: 67611041LB • Stainless-Steel Interior • Viewing Window • Dynamic Air Circulation System • Made in Germany APPLICATIONS • Electronics Industry • Automotive Industry • Aerospace Industry • Material Testing • Research & Development • Quality Assurance CONDITION The unit is in good used condition. The interior is clean and the chamber presents itself in good overall condition. Inspection and functional testing are welcome by appointment.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 152290, SPECTRO SPECTROMAXX optical emission spectrometer (OES), floor model (2020). Serial number: 152290 Wavelength range: 140-670 nm Dimensions (floor model): approx. 790 x 625 x 1350 mm (L x W x H) Condition: - Used in a professional QC laboratory - Fully operational Dslhcszxgtxodw Hscl - Annually maintained and calibrated - Last calibration: October 2025 Included: - PC with licensed software (Spark Analyzer Pro MAX) - Analytical programs (Fe, Al, Ti, Cu, Ni) - Accessories (wire adapters, spark stand, ceramic discs, etc.) - Ready for immediate use Delivery: costs to be determined (EXW) Reason for sale: Optimization of laboratory capacity

Condition: used, LDS V455 Vibration Testing System / Shaking Testing System Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker: V455 Machine Type: Electro-dynamic Vibration / Shaking Testing System Power Amplifier: LDS PA 1000 Power Amplifier For sale is a used vibration and shaking testing system from Ling Dynamic Systems Ltd. (LDS). The system consists of an electro-dynamic LDS V455 shaker, a PA 1000 power amplifier, and a separate fan/cooling unit. The system is suitable for generating defined mechanical vibrations, as well as for vibration, stress, and component testing. Possible applications include use in laboratories, development, quality assurance, and industrial testing. Technical data: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker: V455 System: Electro-dynamic Vibration / Shaking Testing System Power Amplifier: LDS PA 1000 Power Amplifier Amplifier Output Current Indicator: 0–20 A RMS Year of Manufacture: Not specified Fan Motor: Manufacturer: ASEA / Electrolux Elmotor A/S Type: M056SX2 Voltage: 220–240 V Current: 2.0 A Speed: 2,880 RPM Protection Class: IP54 Insulation Class: B Capacitor: 1.5 µF / 360 V Country of Manufacture: Denmark Fan: Manufacturer: Air Control Installations (Chard) Ltd. Type: 2M53 Voltage: 240 V Dcjlhcdjzulngow Hol Phase: 1 Frequency: 50 Hz Current Draw: 0.45 A Speed: 2,880 RPM Capacitor: 1.5 µF MFD: 440 VAC/WKG: 25 Made in U.K. Dimensions: The overall dimensions of the system cannot be clearly determined from the available images and nameplates. Equipment: LDS V455 electro-dynamic shaker LDS PA 1000 power amplifier Separate fan/cooling unit Shaker mounting / base frame Hoses and connection cables Transport case for the power amplifier Accessories as shown in the images Shipping data: Total weight: 240 kg Condition: Used Signs of wear and tear due to age and use are present. Dirt, paint chips, and traces of corrosion are visible. Optical condition as shown in the images. Scope of supply: 1 × LDS V455 electro-dynamic shaker 1 × LDS PA 1000 power amplifier 1 × Fan/cooling unit Shaker mounting / base frame Connection cables and hoses as shown in the images Transport case for the power amplifier Accessories as shown in the images Availability: by arrangement. Scope of supply as shown in the images. Subject to changes, errors and prior sale.

Condition: good (used), Hardness tester, fully functional Upon request, transport and loading can be organized throughout Europe at an additional cost. Prices are exclusive of VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Machine purchase / sale Dolozvfd Rshcdw Hjcl PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you wish to sell your equipment? For further information or contact options, please reach out via the contact form.

Condition: excellent (used), Year of construction: 2023, BINDER VD 56 Vacuum Drying Oven with VD-M 53 Pump Module Manufacturer: BINDER GmbH Type: VD 56 Year of Manufacture: 2023 Machine Type: Vacuum Drying Oven Internal Volume: 55 liters Maximum Temperature: 220 °C Offered is a BINDER VD 56 vacuum drying oven from 2023, including a matching BINDER VD-M 53 pump module and a BINDER VAP 1 vacuum pump. The system is designed for gentle drying of materials under vacuum conditions and is particularly suitable for laboratory, research, development, quality control, and industrial process applications. Technical Data: Manufacturer: BINDER GmbH Model: VD 56 Article Number: 9630-0002 Version: VD056-230V Year of Manufacture: 2023 Internal Volume: 55 l Temperature Range: +9 °C above ambient temperature to +220 °C Heating Time to 100 °C: approx. 80 min Spatial Temperature Deviation at 100 °C: ± 1.2 K Temporal Temperature Deviation at 100 °C: ± 0.1 K Leak Rate: 0.01 bar/h Vacuum Connection: DN 16 Measurement Port: DN 16 Rated Voltage: 200–230 V Mains Frequency: 50/60 Hz Rated Power: 1.4 kW Protection Class: IP20 Made in Germany Pump Module: Manufacturer: BINDER GmbH Type: VD-M 53 Article Number: 8012-1943 Year of Manufacture: 2023 Voltage: 200–230 V / 50–60 Hz Power: 1.80 kW Current Consumption: 8.0 A Phase: 1N~ Protection Class: IP20 Vacuum Pump: Manufacturer: BINDER GmbH Type: VAP 1 Article Number: 5013-0217 Year of Manufacture: 05/2023 Pumping Capacity: 2.0 / 2.2 m³/h Ultimate Pressure: < 7 mbar Voltage: 230 V Frequency: 50/60 Hz Current Consumption: 1.6 / 1.5 A Protection Class: IP40 Dimensions: VD 56 without attachments and connections: Width: approx. 638 mm Depth: approx. 461 mm Height: approx. 815 mm Internal Dimensions: approx. 400 × 343 × 400 mm (W × D × H) Net Device Weight VD 56: approx. 96 kg Maximum Load per Shelf: 20 kg Maximum Total Load: 60 kg Equipment: Digital controller with pressure and temperature display Program-controlled drying monitoring Automatic ventilation at the end of the process Internal data logger Djlozt R D Rohcdw Hscl Ethernet interface Universal ventilation for inert gas or ambient air Vacuum connection DN 16 Measurement port DN 16 Safety glass pane with splinter protection Large viewing window Insert shelf BINDER VD-M 53 pump module BINDER VAP 1 vacuum pump Vacuum and connection hoses Connecting and mounting parts Operating and assembly instructions Further accessories as shown in the pictures Shipping Data: Weight VD 56: approx. 96 kg Due to size and weight, shipping by freight forwarder is required. Condition: Used Year of Manufacture 2023 Optical condition as shown in the pictures Nameplates are present Scope of Delivery: 1 × BINDER VD 56 Vacuum Drying Oven 1 × BINDER VD-M 53 Pump Module / Pump Cabinet 1 × BINDER VAP 1 Vacuum Pump Vacuum and connection hoses Connecting and mounting parts Connection cables Operating and assembly instructions Accessories as shown in the pictures The unit is available for short-term delivery. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.