Used Gear Testing Machine for sale (74,016)

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID Hjdpfx Abjvr Hf Esrsfc GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: used, Year of construction: 2011, machine/vehicle number: 25621, workpiece diameter (max.): 360 mm, Equipped with: Gear Spindle Runout: -Radial (Bore): .00005 -Axial (Face): .00005 Pinion Spindle Runout: -Radial (Bore): .00005 Axial (Face): .00005 Axis Repeatability: -X: .0001 -Y: .0001 -Z: .0001 Axis Lost Motion: -X: .00005 -Y: .00005 -Z: .00005 Fanuc 160I MB Control Hfsdoxdfanopfx Abrec Base Work Holding Draw Bars Automatic Doors Spindle Chiller Transformer Hydraulic System Festo Pneumatics Automation Interface Available SPECIFICATIONS: Maximum Gear Outside Diameter: 360 mm (14.2") Maximum Pinion Outside Diameter: 340 mm (13.4") Maximum Pinion Drive Speed: 3000 rpm Maximum Gear Drive Speed: 1500 rpm Offset Vertical 150 mm ( 5.9") Pinion Cone Range: (90) (135-350) (70) (146-438)* (110) (51-343)* Gear Cone Range: (90) (65-280) (70) (78-306)* (110) (56-284)* Standard Testing Torque Load 2 to 90 Nm (1.5 to 66 ft-lb). Parallel Axis - face-to-face 147 - 362 - Center Distance -7 - 250 Pinion Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 419 mm (16.5") Gear Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 250 mm (9.8") Floor Space (width & length) 2100 x 2550 mm (82.7 x 100.4") Height (to top of stack light) 2750 mm (108.3") Weight (base machine) 9100 Kg (20062 lbs)

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Hodortrzdepfx Abrsfc Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Hfedpew N S E Asfx Abrec Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in Hodpsul Efmefx Abrofc plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 5 - 260 mm gear width: 400 mm max. module: 15 min. module: 0,5 gear hobbing diameter - internal: 30 mm max. helix angle: > 85 ° Aussenverz. max. helix angle: > 45° Innenverz. Testing Range vertical: 400 mm Hfedpfeqvcnnox Abrsc dist. between centers: 5 - 600 mm table diameter: 260 mm max. table load: 100 kg speeds: 30 1/min total power requirement: 1,6 kVA weight of the machine ca.: 900 kg dimensions of the machine ca.: 200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.) *

Condition: used, Year of construction: 2010, max. wheel diameter 180 mm gear width 40 mm max. module 4 min. module 1 M62 is a manually operated go/no go measuring station for checking the usual Hjdsvzh Nqspfx Abrofc gear parameters on gear wheels. Due to the high-precision measuring tools and its robust design, the M62 Flex is ideal for monitoring the quality of gears under workshop conditions during production. M62 provides an accurate and robust solution for quick inspection ofgear teeth after machining, such as hobbing, shaving, grinding and honing on the production line. MARPOSS Industrial PC E9066 N with WINDOWS XP with 15" LCD display with 8 or 12 measuring ports for connecting 12 measuring sensors. Machine dealer with own stock of 1600 m².

Condition: used, max. wheel diameter 0 mm gear width 0 mm max. module 40 min. module 1 weight of the machine ca. 0,05 t dimensions of the machine ca. 0,5x0,3x0,3 m Hsdpfsvn Unyjx Abrjfc pitch and run-out tester unit for gear measuring machines.

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm weight of the machine ca. 4 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : KLINGELNBERG Single- and double-flank rolling test machine with structure-borne sound testing model R 30 year 2007 _____ Workpiece outer diameter min. / max. 36 / 300 mm Center distance between workpiece and counter wheel 135 - 290 mm Spindle speeds max. 3.000 rpm Drive torque max. up to 2196 rpm 20 Nm Drive torque max. 2196 – 3.000 rpm 14,7 Nm Spindle drive 4,62 kW Total drive approx. 10 kW - 400 V - 50 Hz Total weight approx. 4.000 kg Accessories / Special Features: • The machine is a universal rolling tester designed for the following testing procedures: o Single-flank rolling test o Double-flank rolling test o Structure-borne noise testing in single and double-flank contact o Helix testing in double-flank contact • WINDOWS PC control for measurement data acquisition and analysis with the NoisyS32 testing software • SIEMENS control panel for operating the machine and evaluating the test cycles Hfodpfx Aexvdryobrsc • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating instructions • Unfortunately, the license dongle for activating the measurement software is currently missing. We hope to receive it from the supplier of the machine. Condition : very good condition ! Almost unused ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection gear machines – CNC or conventional - available. Please let us know your requirements.

Condition: used, Year of construction: 1997, Technical details: max. wheel diameter: 5 - 350 mm max. module: 20 weight of the machine ca.: 0,8 t min. module: 0,5 dist. between centers: 5 - 750 mm table diameter: 260 mm z-axis: 600 mm Hfedpfxex Uzvve Abroc y-axis: 185 mm max. helix angle: 45 °

Condition: used, Year of construction: 1991, max. wheel diameter --- mm gear width --- mm max. module --- min. module --- Hfsdpfxjya Eqas Abrjc Control --- total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,700 mm, total length: 1,765 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, compressed air connection: 4 bar, Wenzel Smart Gear - gear and 3D coordinate measuring machine The machine is in very good condition and fully functional. It has been regularly serviced and well looked after. Machine data: • Machine dimensions L=1765mm W=1700mm H=2232mm • Max. rotary table workpiece diameter = 5 to 270mm • Measuring accuracy gear testing in accordance with VDI/VDE2612/2613 Group II • Max. rotary table load = 20 daN • Travel paths X= 500mm Y=450mm Z=400mm • Scanning probe - Renishaw SP600M • 7x SP600 change plate for probe included • Module measuring range 0.4 - 10mm • Active air damping of the machine • Year of manufacture 2008 • Accessories such as driver, reference ball etc. as shown • Jaw chuck D=80mm with inside and outside jaws • 24 inch monitor, mouse, keyboard The following software modules are included: Gear cutting software: • TMain - program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Calculated axis position determination • TGear – Spur gear measuring program • TGear – Head and root circle option • TWorm – Worm measuring program Hodpfx Ajvvudksbrefc 3D software • Metrosoft CM 3.8

Condition: like new (used), functionality: fully functional, Module range 0.5 –15 Gear width, continuously measurable max. 400 mm Hfodsx N Itwjpfx Abrec Max. Outer diameter of gear 300 mm Lead angle 0° - 90° Distance between centers 0 – 900 mm Admissible loading weight max. 200 kg Fully automatic CNC-controlled gear measuring center for spur gears and other gears, depending on the software. Software: - Gears(internal/external), Shaper Cutter, Shaving Cutter

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm Hsdpfjukitxex Abrofc axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Year of construction: 2007, condition: used, max. wheel diameter 400 mm gear width - mm max. module - workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron) Hfsdpfxegr Harj Abrec

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad speeds: R T min Hfsdpovxwxcefx Abrsc rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m

Condition: excellent (used), max. wheel diameter 200 mm gear width 300 mm Hfedpow Ny Ulefx Abrec module 0,5 - 25 centre distance 750 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 0,8 x 0,6 x 0,6 m worm testing roll-machine

Condition: excellent (used), Year of construction: 2014, max. wheel diameter 400 mm gear width 600 mm max. module 20 min. module 0,1 Control Frenco weight of the machine ca. 1,2 t Originally a Klingelnberg measuring machine, rebuilt and modernized in 2014 by Frenco. Windows 10, Frenco FGI-Pro software, current maintenance Double flank rolling test. Hsdpfx Aount Uzjbrefc

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 0 mm Hodpfx Abjt Hw Aasrefc max. module 34 min. module 1 total power requirement ca. 15 kW weight of the machine ca. 15 t dimensions of the machine ca. 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter

Condition: used, Year of construction: 1975, max. wheel diameter 160 - 1.600 mm gear width 250 mm max. module 20 min. module 1,5 total power requirement 1 kW weight of the machine ca. 3 t Hjdpet Hwptsfx Abrjfc dimensions of the machine ca. m

Condition: used, Year of construction: 1980, max. wheel diameter 400 mm gear width NA mm max. module 5 min. module Hfjdpjt Hw Ebjfx Abrec total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Manual Two Flank Gear Tester

Condition: used, The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies for noise and contact pattern testing on bevel and hypoid gears. Hfedpfx Abjxpq Nlorec Technical Data • Diameter: 540 (400) mm • Hypoid: ±50 mm • Pinion spindle diameter: 90 mm • Dimensions (LxWxH): 1,800 x 1,800 x 1,600 mm • Machine weight: approx. 2,800 kg *Information and data are provided without obligation. Subject to prior sale. Special Features: The machine is intended for noise and contact pattern testing on bevel and hypoid gears of all gear types. By simulating operational conditions, applying various rotational speeds, and switching load states between drive and coast, the optimal installation distance for standstill can be determined. • Digital actual value display for 2 axes • Infinitely variable speed adjustment via frequency inverter • Electrically secured and removable safety guard • Accessories: Large number of workpiece holders • Condition: Very good

Condition: refurbished (used), functionality: fully functional, The Klingelnberg PKE 300 H (PSKE 900) bevel gear testing machine was designed as a universal machine for the flexible machining of gears and is used for single flank rolling tests on bevel gears with evaluation Picture shows machine in actual condition as retrofit / modernized. Performance description: Hedpfstncnhox Abrjfc Wheel diameter: 450 (300) mm Axle angle: 90 degrees Hypoid: +/- 60 mm Space requirement approx.: 1.4 x 0.8 x 1.5 mm Machine weight approx.: 1,100 kg Further information on possible options, current purchase price on request. *Information, dates are non-binding, subject to prior sale

Condition: used, functionality: fully functional, The bevel gear testing machine Gleason-Welter 2000 T was designed as a universal machine and is used by manufacturers of gears and transmission technologies for the single flank rolling test process of bevel and crown gears. Technical Data Diameter: 2000 mm Hedpfjwn D Uhox Abrjfc Spindle bore: 310/250 mm Test speed: 5-100 rpm Dimensions: approx. 4,200 x 4,500 x 2,300 m Machine weight: approx.12,500 kg *Specifications and data are non-binding, subject to prior sale Special Features: Angle-hypoid test device, suitable for testing larger sizes of bevel and hypoid gears with a diameter of up to 2,000 mm and shaft angles from 0 to 360 degrees, as well as straight, helical, and internal gearing. Deviations in gear geometry, machining errors through defective tools, as well as damage to the gears, can thus be identified and eliminated before assembly. The following parameters can be measured here: - Single flank rolling deviation Fi', fi', fl', fk' - Pitch deviations Fp, fp, fu - Runout and roundness - Runout error Fr - Backlash - FFT analysis For technical questions and further information, you can contact us at any time.

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: Frenco URM-K Typ HGM 38101, For sale here is a Frenco gear measurement machine URM-K (Universal Rotational Measurement with Measuring Balls), type HGM (Horizontal, Counter-Centre, Manual) from the year 2000. The device has been out of operation for a long time. When powered on, the error 'A disk read error occurred' appears. Price is negotiable. Hsdpfx Asxli Acjbrofc