Used Temperature Bath for sale (6,708)

Condition: used, External circulating bath, circulating thermostat, temperature bath, water bath, circulating bath Dodpfx Ahexcbnxo Uokw BROOKFIELD Type TC-102D Serial No. D07200476 Temperature range: +5 °C to +150 °C Temperature stability: ±0.05 °C Temperature uniformity

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. Dkedjxhfl Ejpfx Ah Ujw High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: M0335, Cyril Bath type 20 T Hydraulic Swing Arm Stretch Forming Machine year 1997 serial number M0335 capacity 20 t engine power 126 kW electric connection 400 V description With control Cyril Bath Monitor Type: Flexscan 685 12 CNC axes 4 auxiliary axes Stretching force 20–200 kn Bending angle 2 x 95 degrees Rotation stretching cylinder 2x –45/225 degrees Dkjdpfjqcu Acjx Ah Ujw Component length from 762 to max 3810 mm Hydraulics from Rexroth with 2 x hydraulic pumps: 45 kW each Various spares available

Condition: used, This listing is for the LEEC P33 Mk 11 Proportional Temperature Controller The unit is in full working condition and is ready for immediate use LEEC P33 Mk 11 Proportional Temperature Controller (Precision Incubator) This unit is a microprocessor-based PID (Proportional‑Integral‑Derivative) temperature controller, designed to deliver exceptionally stable temperature regulation within the LEEC P33 Precision Incubator. Key Features & Performance Highly Accurate Regulation: Maintains temperature within ±0.1 °C at 37 °C—ideal for sensitive biological and laboratory applications. Dual Temperature Display: Clearly shows both the user-set "target" and the current "actual" temperature on a digital LED display, with indicators for when heating is active. Proportional (PID) Control: Employs PID control through low-wattage heating elements profiled to avoid hot spots. This ensures smooth transitions and precise thermal stability. Fast Recovery & Uniformity: Recovery Time: Approximately 6 minutes to return to set temperature after door opening. Uniformity: Achieves ±1.0 °C variation across the chamber. Fan-Assisted Circulation: Twin fans create gentle, full-width airflow; fans automatically shut off when the door opens to reduce heat loss. Safety Cut-Out: A digitally adjustable over-temperature safety cut-out prevents accidental overheating; visual indicators and alarms streamline monitoring. Context: P33 Precision Incubator Specifications Temperature Range: From at least 5 °C above ambient up to +60 °C. Capacity & Construction: Chamber Volume: 730 litres, built from stainless steel. Dimensions: External—1550 × 1270 × 660 mm; Internal—1275 × 1140 × 490 mm. Weight: 225 kg. Mobility: Castor wheels are included—lockable for stability. Power: 600 W rating for heating operation. Optional Accessories: Additional shelves (L3) Dodpfexhfi Rox Ah Uokw Internal power point (PP) External cooling unit required for operation near or below ambient temperature (e.g., LEEC recirculating cooler) Summary The LEEC P33 Mk 11 proportional (PID) temperature controller offers precise, stable, and responsive control—maintaining ±0.1 °C at 37 °C with fast recovery and uniform temperature distribution. It features handy dual displays, safety cut-outs, and is complemented by a robust chamber design. Perfectly suited for high-demand laboratory and incubation applications.

Condition: ready for operation (used), Condition Used Stock Number 39363 Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Key Specifications Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm External Dimensions: 335 x 215 x 200 mm Dkodowgtm Rspfx Ah Uew Heating Power: 0.35 kW Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Additional Features: Three programmable temperature presets Countdown timer with audible buzzer Front panel lock-out User-settable sample protection and fixed thermal cut-out Gable polycarbonate lid included​ This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, total height: 220 mm, total length: 720 mm, total width: 380 mm, type of input current: AC, Jufeba Tempering Unit TG 1-3 T Jufeba Model: TG 1-3 T Tabletop unit with container Stainless steel construction Dkodpsxvk Hdofx Ah Ujw Dry heating Manual temperature control Robust engineering Connection: 230V Used unit, cleaned With warranty + spare parts service Options: Maintenance contract GM stainless steel container Delivery service Instruction & commissioning We have many more tempering units in stock!

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Dksdpfx Ajxugq Ash Usw Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Year of construction: 2017, condition: good (used), Temperature Control Unit Tool Temp TT-181 Stock No.: 503648 Machine/Device type: Temperature control unit Manufacturer: Tool Temp Model: TT-181 Dksdpfx Ahsxt Rgle Ujw Year of manufacture: 2017 Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: excellent (used), Type: VCS 7034-5 Climate Test Chamber Water-Cooled Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3,000 W / at -20°C: 3,000 W Temperature calibration points: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Humidity deviation over time: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climatic calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width: 580 mm, Depth: 765 mm, Height: 750 mm External dimensions: Width: 870 mm, Depth: 1595 mm, Height: 1775 mm Feedthroughs: Dsdpfx Ahoxufypo Uokw 1 x approx. 50 mm Ø, left side 2 x approx. 125 mm Ø, left side 1 x approx. 125 mm Ø, right side Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R404A / R-23 For your security as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Year of construction: 2017, condition: good (used), Temperature control unit Tool Temp TT-181 Dedext Rf Ijpfx Ah Uskw Stock no.: 503647 Machine/Device type: Temperature control unit Manufacturer: Tool Temp Type: TT-181 Year of manufacture: 2017 Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: excellent (used), Type: VT 4004 Vötsch Temperature Test Chamber, Air-Cooled Temperature Range: -40°C to +180°C 37 liters Temporal Temperature Fluctuation in the Usable Volume: ±0.2 K to 0.5 K Spatial Temperature Deviation: ±0.5 K to 1.5 K, corresponding to a temperature gradient of 1 K to 3 K Temperature Rate: Temperature change rate according to IEC 60068-3 Heating: 5.3 K/min Cooling: 6.0 K/min Heat compensation: max. 550 W Calibration values: +23°C and +80°C Technical Description VTM 4004 Dkjdpjxt D Ayjfx Ah Ujw Installation and Operation Data: Test chamber internal dimensions: Width 320 mm, Depth 290 mm, Height 400 mm External dimensions: Width 1000 mm, Depth 780 mm, Height 630 mm Test Chamber: Floor load capacity: 200 kg/m² Point load: max. 15 kg Test chamber lighting: Halogen lamp 20 W, only with additional equipment “door with viewing window” Port openings: 3x port openings 2x diameter 50 mm, installed left side 1x diameter 80 mm, installed left side Refrigeration unit: low-noise, fully hermetic refrigeration, air-cooled Control terminal: Mincontrol Backlit display Plain text display Password protection Input for setpoints; access to stored test programs Temperature limiting software for minimum and maximum chamber temperatures Plain text error messages Control system: Microprocessor-controlled regulation and monitoring system MINCON/32 32-bit technology Integrated program controller Fault diagnostic system Program memory for 100 programs with a total of 1000 segments, 250 loops and 9999 cycles RS 232 interface Communication with user’s PC Networking of up to 32 devices optionally possible via RS 485 Voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 0.7 kW Rated current: 4.0 A Refrigerant: R-404A Weight: 115 kg For your safety as a buyer, please note the following information! The following procedures are carried out in advance on chambers offered by us: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and details subject to change and errors) If you have further questions, we will be pleased to answer them by phone.

Year of construction: 2018, condition: good (used), Temperature control unit Tool Temp TT-181 Stock No.: 503646 Machine type/Device type: Temperature control unit Manufacturer: Tool Temp Model: TT-181 Year of manufacture: 2018 Max. operating temperature: 150 °C oil Dsdpjxt Rfbjfx Ah Ujkw Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Year of construction: 2018, condition: good (used), Temperature Control Unit Tool Temp TT-181 Stock No.: 503645 Machine/Device Type: Temperature Control Unit Dedsxt Rd Dopfx Ah Uskw Manufacturer: Tool Temp Model: TT-181 Year of Manufacture: 2018 Max. Operating Temperature: 150 °C Oil Max. Operating Temperature: 90 °C Water Heating Capacity: 9 kW Water / 3 kW Oil Circulation Medium: Water or Oil

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature control unit plasma plasTemp Primus 90 Stock no.: 503644 Machine type / Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Technical data plasTemp temperature control unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters Djdpjxt Rddjfx Ah Ujkw - Heating capacity: 9.0 kW, via two stainless steel tubular heaters made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference between mold supply and cooling water of 80 K, pressure difference in the cooling water circuit min. 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Self-optimizing microprocessor controller, SBC • Digital display for setpoint and actual value of supply temperature • Maximum temperature monitoring • Automatic filling with level monitoring • Output socket for collective fault signal • Acoustic alarm indicator • Hour meter • Heating control via solid-state relay (SSR) • Leakage monitoring • Leak-stop operation (suction mode) • Draining for tool change • Manual filling • Dirt filter • Unit mounted on rubberized castors • Connections: Mold hose nozzle G 1/2” (14 mm), cooling water hose nozzle G 3/8” (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature Control Unit plasma plasTemp Primus 90 Stock No.: 503643 Machine type / Device type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Technical Data plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating power: 9.0 kW - via two stainless steel tubular heaters - made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference between mold supply and cooling water of 80 K; pressure difference in the cooling water circuit at least 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Equipment includes: • Self-optimizing SBC microprocessor controller • Digital display of set and actual values for supply temperature • Maximum temperature monitoring • Automatic filling system with level monitoring • Output socket for collective fault reporting • Acoustic alarm indicator • Operating hours counter • Heating control via solid state relay (SSR) • Leakage monitoring • Leak-stop operation (suction mode) • Suction for tool change • Manual filling • Dirt filter • Unit mounted on rubberized casters • Connections: Mold hose nozzle G 1/2" (14 mm), Cooling water hose nozzle G 3/8" (14 mm) • Electrical connection: CEE plug 16A Dodpext Rc Hsfx Ah Ujkw • Dimensions: L = 0.73 m, W = 0.27 m, H = 0.58 m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature Control Unit plasma plasTemp Primus 90 Stock No.: 503642 Machine/Device Type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of Manufacture: 2018 Technical Data for plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50: - Circulation medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW - via two stainless steel tubular heaters - made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference of 80 K between tool inlet and cooling water; minimum pressure difference in cooling water circuit: 3 bar - Pump: Bronze submersible pump, Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Microprocessor controller, self-optimizing SBC - with digital display of setpoint and actual values for supply temperature • Maximum temperature monitoring • Automatic filling system with level monitoring • Output socket for collective fault signal • Acoustic alarm buzzer for alerts • Operating hours counter • Heating control via Solid State Relay (SSR) • Leak monitoring • Leak stop mode (suction operation) • Extraction function for tool change • Manual fill option • Dirt filter Dkedpext Rafofx Ah Uew • Unit mounted on rubberized castors • Connections: Tool hose connector G 1/2" (14 mm), Cooling water hose connector G3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulation medium: Water

Condition: good (used), Year of construction: 2013, Temperature control unit plasma easy 90 Stock No.: 503641 Machine/Device type: Temperature control unit Manufacturer: plasma Dodpfx Ahjxt N R Ns Uskw Model: easy 90 Year of manufacture: 2012 Max. operating temperature: 95 °C Heating capacity: 6 kW Circulating medium: Water

Condition: good (used), Year of construction: 2013, Temperature control unit plasma easy 90 Stock No.: 503640 Machine/Device type: Temperature control unit Manufacturer: plasma Model: easy 90 Year of manufacture: 2013 Max. operating temperature: 95 °C Heating capacity: 6 kW Dkjdpfx Aext N Rceh Usw Circulating medium: water

Condition: good (used), Year of construction: 2012, Temperature control unit plasma easy 90 Stock no.: 503639 Machine/device type: Temperature control unit Manufacturer: plasma Model: easy 90 Year of manufacture: 2012 Max. operating temperature: 95 °C Heating capacity: 6 kW Circulating medium: Water Dkjdpfxsxt N Nrj Ah Uew

Condition: good (used), Year of construction: 2012, Temperature Control Unit plasma easy 90 Stock No.: 503638 Machine/Device Type: Temperature Control Unit Manufacturer: plasma Dkodpfext N Nfjx Ah Uow Model: easy 90 Year of Manufacture: 2012 Max. Operating Temperature: 95 °C Heating Capacity: 6 kW Circulating Medium: Water/water

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Stock no.: 503637 Djdpfxext N Hwe Ah Uskw Machine/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160°C Heating capacity: 9 kW Circulating medium: Water/water

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Stock no.: 503636 Machine type/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Dedpfxext N E Tj Ah Ujkw Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160° Heating capacity: 9 kW Circulation medium: Water

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Stock no.: 503635 Dkedpfx Ahsxt N Ems Uow Machine/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160° Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Dodpfxoxt N D No Ah Ujkw Stock No.: 503634 Machine/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160° Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2007, condition: good (used), Temperature control unit HB-Therm HB-100 U1 Stock no.: 503633 Machine/Device type: Temperature control unit Manufacturer: HB-Therm Dkedpfx Aext Ny Dsh Ujw Model: HB-100 U1 Year of manufacture: 2007 Maximum operating temperature: 100°C Heating capacity: 8 kW Heat transfer medium: Water