Used Thermos for sale (619)

Condition: used, Year of construction: 2001, Thermo-lamination system Manufacturer: BÜRKLE Type: FFAII 1300 Year of manufacture: 2001 Technical data: Working width: 1300 mm Panel dimensions Width: 200 - 1300 mm Length: 400 - 3000 mm Thickness: 8 - 40 +/- 0.2 mm Film dimensions Width max. 1320 mm (lateral overhang up to 20 mm) Roll diameter 76 or 152 mm (3" or 6") Working height above floor: 940 mm System speed: 15 - 45 m/min Three-phase drive with vector control Operating side: right Panel feed: centered System configuration FFAII 1300 Isdpfezuzt Sjx Ahnsba - Brush machine DBM (chain brushes) - Preheating and smoothing calender GKL, D = 500 mm - Thermo-oiler heater 36 kW - Hardener application machine DAH + complete hardener circulation system with monitoring - Transport section + IR zones with temperature sensors - Adhesive application machine DAK + automatic level sensing - Cooling unit for DOW cooling - Adhesive supply - Conical transport section TKE - Lamination calender EKM, D = 500 mm + film unwinding station + separating station + belt transport section with operator platform for FVE - Expansion shafts - Smoothing calender GKL, D = 500 mm at the inlet of the conveyor belt - Thermo-oiler heater 96 kW for lamination calender and smoothing calender - Central control cabinet - I.S.E. Optimat ISL 111 (year of manufacture 2004) Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Falling Ball Viscometer like Thermo HAAKE Type C THERMO ELECTRONIC CORPORATION Type 002-7580 Serial No.: Ibodexcbnrepfx Ahnea With the Thermo falling ball viscometer, you can measure viscosity precisely without electricity, using only a stopwatch. It allows for accurate measurement of the viscosity of transparent Newtonian liquids and gases. Measuring principle: A ball moves by rolling and sliding inside an inclined cylindrical tube filled with the liquid to be tested. The time it takes for the ball to travel a defined measuring distance is recorded. By swiveling the measuring section, the return movement of the ball can also be used for measurement. The result is displayed as dynamic viscosity in mPa·s. Max. viscosity: 100,000 mPa·s Min. viscosity: 0.5 mPa·s Standards: DIN 53015, ISO 12058 Reproducibility: < 0.5% Thermometer: -1 °C to +26 °C (read-out accuracy 0.1 °C) Ball set Type 800-0182 with 6 balls (balls 1 and 2 made of borosilicate glass; balls 3, 4, 5 and 6 made of nickel-iron alloy) Recommended for: Chemical industry (polymer solutions, solvents, printing inks) Pharmaceutical industry (raw materials, glycerin) Mineral oil industry (oils, liquid hydrocarbons) - Inner glass tube (falling tube) damaged on one side at the screw socket (see images). Replacement part no. 002-6968 Dimensions of inner tube: outer diameter 20 mm; inner diameter 16 mm; wall thickness 2 mm; length 225 mm Dimensions (W x H x D): 170 x 310 x 220 mm Weight: 3.5 kg

Condition: used, This listing is for a Thermo Scientific MSC-Advantage Biological Safety Cabinet The unit is in full working condition and ready for immediate use This biological safety cabinet is a high-quality lab instrument manufactured by Thermo Scientific (Model: MSC-Advantage). A Class II biosafety cabinet that delivers unparalleled protection for personnel, products, and the environment during microbiological tasks. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Iedpozugdpofx Ahneba Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, This listing is for a Thermo Scientific Heraguard ECO 1.5 Laminar Flow Clean Bench The unit is in full working condition and ready for immediate use This laminar flow clean bench is a high-quality lab instrument manufactured by Thermo Scientific (Model: ECO 1.5). Provides a highly efficient HEPA-filtered workspace designed to protect sensitive samples and materials from airborne contamination during routine laboratory procedures. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Isdszugdiopfx Ahnoba Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Ibedpei E Trpofx Ahnoa

Condition: used, This listing is for the Thermo Scientific Multifuge Pro Centrifuge Series The units are in full working condition and are ready for immediate use Iodpfxoyt Naxs Ahnsba The Thermo Scientific™ Multifuge™ Pro Centrifuge Series (including the X4R refrigerated model) is a high-performance, versatile laboratory centrifuge designed for high-capacity, general-purpose processing. Featuring a 4-liter capacity, these units are ideal for cell culture, blood separation, and microbiologyKey Features: - Auto-Lock™ Rotor Exchange: Tool-less, push-button rotor exchange for fast application changes in under 3 seconds. - Intuitive Interface: A full-color touch screen provides easy, rapid programming, with storage for up to 100 programs. - Versatility & Capacity: Compatible with up to 18 different rotors (swing-out and fixed-angle) with a maximum speed of 15,200 rpm (up to 25,830 x g). - Sample Protection: ClickSeal™ biocontainment lids provide certified, glove-friendly, snap-on sealing for safety. - Efficient Design: The X4R refrigerated model includes a powerful cooling system for temperature-sensitive samples, with a range of -10°C to +40°C. - SMARTSpin™ Technology: Advanced rotor management optimizes acceleration, braking, and residual load imbalance.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Heuft VTR model trolley/drive-in thermo-oil furnaces - 10 shelves, 2 trolleys, 60cm x 80cm (58cm x 78cm) sheets - furnaces after renovation - with a heating boiler - assembly - installation (Europe and beyond) Ibjdpfxjv T Rkzs Ahnea - pipe insulation - transport - possible dismantling of old furnaces

Year of construction: 2014, condition: used, This listing is for 1 of 2 Thermo Scientific ORBITOR RS Microplate Handler The unit is in full working condition and ready for immediate use This robotic microplate handler is a versatile arm designed to provide accurate and consistent automated movements for laboratory workflows. Manufactured by Thermo Scientific, this reliable collaborative robot is an excellent addition to any modern high-throughput screening facility. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. 2015 Cedrex Fluid X xsd-48 Pro Source Pedigree: Biotech / Research Facility Iodpfszqf I Eex Ahnsba Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for a Thermo Scientific Multidrop Combi Type 836 Microplate Dispenser. The unit is in full working condition and ready for immediate use. This bulk reagent dispenser delivers precise, high-speed fluid handling across various microplate formats. Ideal for high-throughput screening, it features an easy-to-use interface and ensures low dead volume to save valuable reagents. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Ibedpfx Ahjzgdf Ienoa Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, This listing is for the Thermo Scientific ClearVue Coverslipper Ibedpfxoyt Ilae Ahnoa The units are in full working condition and are ready for immediate use The Thermo Scientific ClearVue Coverslipper is an automated, high-throughput system designed to streamline slide preparation in pathology and histology laboratories. It is engineered to deliver high-quality, consistent results with minimal manual intervention Key Features and Performance - High Throughput: The system can process up to 250 slides per hour. It can handle up to 11 slide baskets simultaneously through a load-on-demand system. - Specimen Recognition: The system automatically identifies the type of slide preparation (histology vs. cytology) and adjusts the mountant volume. - Stainer Compatibility: It is compatible with various slide stainers, including:Thermo Scientific Varistain Gemini ES and 24-4. - Sakura Tissue-Tek DRS 2000 series. - Leica Auto-Stainer - Pre-loaded Hoppers: The system uses pre-filled coverslip hoppers (holding 500–575 slips) to reduce glass handling and prevent contamination or fingerprints. - Optical Recognition: Sensors ensure proper slide positioning. The system uses vacuum and pressure to mount the cover glass accurately without bubbles

Condition: used, This listing is for Thermo Scientific CIR19 Circulating Bath The unit is in full working condition and ready for immediate use. This laboratory immersion circulator delivers exceptional temperature stability for sensitive samples. It features an intuitive digital controller, robust pumping capacity, and a durable stainless steel bath reservoir, making it perfect for routine clinical, industrial, or academic research application workflows. Transparency Report and Technical Audit: - Source Pedigree: Biotech / Research Facility - Condition: Direct-from-Bench (Decontaminated/Original) - Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. - Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Iodpfszgfxvox Ahneba Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is, Where-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, This listing is for the Thermo Scientific CW2 Sorvall Cell Washing Centrifuge. The unit is in full working condition and ready for immediate use. This premium cell washer streamlines blood bank procedures and simplifies cleaning protocols. It offers reliable, automated performance with an easy-to-use digital interface, making it perfect for demanding clinical and research environments. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Ibjdpfxsza Dtae Ahnoa • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original)

Year of construction: 2007, condition: used, Thermo oil cooking vessel Stainless, 2003, 250L, thermo-oil cooking vessel, up to 250'C temperature adjustable. Ibodpfxjb Uazmj Ahnoa

Condition: used, Year of construction: 2007, machine/vehicle number: 1369, Einbrenn-System Kodak TSO-850 High-Speed Thermo-System / Baking-System Kodak-TSO-850 High-Speed Thermo-SystemYear 2007 - Serial-No. 1369 Arbeitsbreite / Working width max. 850mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 40A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Ibsdpfx Aoh Aya Iohnsa

Condition: used, Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve -Manufacturer: Alco, thermo-valve upper part unused in original packaging -Type: XB 1019 MW55-1B/PCN 803379 -Operating range: +10 to -30 °C -Price: per piece -Number: 7 piece -Dimensions package: 120/120/H160 mm -Weight: 0.7 kg/piece Ijdpfjfx Atgjx Ahnjba

Condition: used, This listing is for a Thermo Scientific 75005701 Centrifuge Rotor. The unit is in full working condition and is ready for immediate release. Thermo Scientific 75005701 Centrifuge Rotor The 75005701 Centrifuge Rotor is a high-capacity swinging bucket rotor engineered for use with Thermo Scientific Sorvall ST8 and Heraeus Megafuge 8 centrifuges, designed for efficient and safe sample processing. Key Features: Capacity: Holds 4 round buckets, allowing for versatile sample volumes and formats, ideal for various laboratory applications. Swinging Bucket Design: This design promotes efficient sample processing, enabling the rotor to tilt during centrifugation for effective separation and easier loading/unloading. ClickSeal Biocontainment Lids: These lids ensure secure, one-handed operation, minimizing contamination risks and enhancing user safety during sample handling. Adaptors for Blood Collection Tubes: Specifically designed adapters accommodate 5/7mL and 10mL blood collection tubes, making it suitable for clinical and research applications involving blood samples. Compatibility: Tailored for use with Thermo Scientific Sorvall ST8 and Heraeus Megafuge 8 centrifuges, ensuring seamless integration into laboratory workflows. Isdpfx Ajxxyxbehnsba Specifications: Type: Swinging bucket rotor Capacity: 4 round buckets Adaptors: Available for blood collection tubes (5/7mL and 10mL) Compatibility: Thermo Scientific Sorvall ST8, Heraeus Megafuge 8 centrifuges

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Manufacturer: Thermo Haake Model: C30S Controller: Phoenix II Controller type: 003-6431 Device type: 003-8195 Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Isdjzi Tmajpfx Ahnoba Application: The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, cooling and heating of measurement systems, temperature stabilization of liquids. Condition: used, functional, controller operates correctly, display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Included in the set: Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Condition: used, mileage: 212,500 km, power: 96 kW (130.52 HP), first registration: 12/2015, fuel type: diesel, empty load weight: 2,135 kg, overall weight: 3,500 kg, wheelbase: 4,035 mm, next inspection (TÜV): 03/2028, fuel: diesel, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,363 mm, total width: 2,050 mm, total height: 2,522 mm, Equipment: air conditioning, cooling unit, electric window regulation, power mirror, 2.3, 130 Multijet, Ibsdpfjzfinrex Ahnja L5 H2, Refrigerated delivery van, ThermoKing V300, cools down to +1°C, Cooling system starts, but no cooling performance, Total weight 3500 kg, Overall length 6363 mm, Wheelbase 4035 mm, 6-speed, EURO 5, Electric windows, Electric exterior mirrors, Air conditioning, Sold on behalf of the owner! German registration Mileage according to odometer Vehicle preferably sold to commercial businesses or for export, Private sale subject to approval Sold without warranty Net price for export Net: 7,500 EUR + (19% VAT) 1,425 EUR = Gross: 8,925 EUR The above information is non-binding; errors/changes and prior sale are subject to change!

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Isdpfsxukh Esx Ahnsba Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Blood banking/separation of large bag volumes. Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes

Condition: used, This listing is for the Thermo Scientific 600V TSX Series Ultra Low Temperatire Freezer The unit is in full working condition and ready for immediate use Designed for dependable ultra-low temperature storage, this freezer offers energy efficiency, advanced temperature control, and reliable performance for laboratory and research environments. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility Ibsdpfx Ajyyw Tbohnoa • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: ready for operation (used), Year of construction: 2013, cutting speed: 12,000 mm/min, total width: 2,000 mm, total height: 2,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, controller manufacturer: BECKHOFF, number of axes: 4, This 4-axis VOORTMAN VCS Thermo was manufactured in 2013. It features a multi-axis automated chamfering/bevel head and is equipped with a Hypertherm HPR260XD plasma source with Truehole technology. The machine includes an integrated Beckhoff operator console and Beckhoff nesting software. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VCS Thermo plasma cutting machine we have for sale. Contact us for further details. Ibedjzd Abpjpfx Ahnja - Cutting Head Setup: Multi-axis automated chamfering/bevel head- Plasma Source: Hypertherm HPR260XD with Truehole technology- CNC Control: Integrated Beckhoff operator console- Software: Beckhoff nesting software including security dongle- Extraction Unit: TEKA Cube filter extraction unit- Filter Condition: Minor defect reported; will be repaired and sold in fully operational condition- Additional Equipment: cutting nozzles and two heads

Condition: excellent (used), NITON XL3t 980 GOLDD+ – a portable X-ray analyzer featuring a next-generation SDD detector with GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional Si-PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, and P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without using helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral libraries of alloys enables the identification of stainless steels, tool steels, chrome-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, zinc alloys, zirconium alloys, and aluminum alloys. The analyzer provides very fast measurements. The analysis time for typical alloys is less than 3 seconds. Iodpfjzlccisx Ahnjba An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys, such as: casting alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), zinc alloys with aluminum (Al). The analyzer enables the analysis of: all alloys based on iron (0.00x% – 100%) and non-ferrous metals (0.00x% – 100%) as well as rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x% -100%). The NITON XL3t 980 GOLDD+ analyzer operates on BASIC PARAMETERS, meaning it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: an identification program that allows you to assign a name, symbol, number, etc. to a known sample, and subsequent samples will be identified by this name B23Zpkshvo a program for quantitative chemical analysis (SuperChem Teach Mode) – based on your own standards, you can create your own calibration curves for quantitative analysis. The analyzer has a large, user-friendly, touch screen. The screen is color and tiltable, which makes it easier to read the results while working in the field, integrated scanner, backlit alphanumeric identification codes for samples. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two, interchangeable batteries. One battery allows for continuous operation for 8-10 hours without the need for charging. It has two libraries: 900 and 800.

Year of construction: 2016, condition: used, This listing is for the 2016 Thermo Scientific MSC 1.2 Safety Cabinet Class 2. Ibjdpfx Ahozgv Nrsnoa The unit is in full working condition and ready for immediate use. Designed for reliable microbiological safety, the Thermo Scientific MSC 1.2 delivers essential personnel, product, and environmental protection. Ideal for clinical and research labs, it offers high-efficiency HEPA filtration and a sloped front window for comfortable and secure handling of biological agents. Transparency Report and Technical Audit: Power-On Test: Verified; Control panel active, interior lighting operational, and airflow/fan system engaged.

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Ibsdpeq A Um Refx Ahnoa Special equipment: Hollow floor facility available Control cabinet: included

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Ibjdpfx Aehbu E Hohnsa Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.