Used Refrigeration Plant for sale (8,669)

Condition: good (used), HK Refrigeration Refrigeration set Crodpfx Ajqqhraektsi Consists of Friga-bohn twin fan evaporator and copland compressor

Condition: good (used), HK Refrigeration Refrigeration plant Consists of twin fan and compressor Csdoqqhr Nepfx Akteri

Condition: good (used), HK Refrigeration Refrigeration plant Csdpfx Aeqqiygskteri

Condition: good (used), HK Refrigeration Refrigeration plant consist of twin fan evaporator and Copeland compressor Crodsqqix Uopfx Aktei

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: cooling unit, fridge, 5 units Star Refrigeration water-cooled chillers with 5 cooling towers Industrial chilled-water packages by Star Refrigeration Ltd, Glasgow. Contract 100663, installed 2016. Five chillers in stock. Six cooling towers available with the set or separately. Price on request. Each chiller is a packaged R134a plant on a steel skid: three semi-hermetic compressors, shell-and-tube chilled-water evaporator, oil separator, SMES control panel and gas detection. Specification per chiller. Manufacturer: Star Refrigeration, Thornliebank Industrial Estate, Glasgow G46 8JW Refrigerant: R134 a Charge: 840 kg Maximum allowable pressure: 18.0 barg high side / 17.2 barg low side Year of installation: 2016 Supply: 400 V, 3 phase, 50 Hz Control voltage: 110 V Control panel: SMES CE marked Compressors Three semi-hermetic compressors per machine, numbered 1–3, each with oil separator and terminal box. Refrigerant lines tagged R134a. Evaporator Stanref International shell-and-tube, model FEV3021/715, built October 2015, dry weight 2,200 kg. Shell: R134a, 570 litres, design 17.2 bar. Tubes: chilled water, 430 litres, design 10 bar. Connections labelled CHILLED WATER. Electrics SMES cabinet with controller, start/stop and emergency stop. Electronic Devices Ltd gas detector ED 811 (ATEX). Schneider Electric isolator 415 V, 250 A, type SQB7200L. Siemens motor 400/690 V, 50 Hz, IP55. Cooling towers 5 towers in stock. Offered with the five chillers as a complete heat-rejection set, or as a separate lot. Used industrial plant. Sale: one chiller, all five, towers only, or 5 chillers + 6 towers. The five chillers come from one contract, so voltage, refrigerant, charge and layout match across the lot. Take a single machine for spare duty or take all five for a plant room. The six towers close the water-cooled circuit if you need heat rejection on the new site. Csdpfxszz Rfqj Aktsri

Condition: used, Year of construction: 2000, Refrigeration system as an ice storage system with refrigerant R404a and a cooling capacity of 6.5 kW. Consisting of the following components: -stainless steel evaporator system -Plastic tank, double-walled, insulated -Refrigeration compressor -blower to increase the melting capacity -Refrigeration aggregar with condenser block and ice regulator -Ice water pumps -Switch cabinet Additional title: Ice storage plant Cooling capacity: 6 kW Storage capacity: 55 kWh Cjdpfjw Td Evsx Akteri Max melting capacity: 42 kW Max. operating pressure: 25 bar Power: 7,5 kW Current: 18 A Voltage: 400 V Frequency: 50 Hz Length: 2610 mm Width: 1170 mm Height: 1800 mm Weight: 2 t Features: Evaporator system, plastic container (insulated, double-walled), refrigeration compressor, fan, refrigeration unit (with condenser and ice regulator), 2 ice water pumps, control cabinet

Year of construction: 2008, condition: ready for operation (used), A refrigeration system including free cooler, drip tray with substructure, piping, connection lines and control system is available. 1) Eurocooler refrigeration system: Refrigerant: R407C, cooling capacity: 235kW, water circulation rate: 38m³/h, glycol content: 35%, compressor capacity: 80kW, fan capacity: 33280m³/h, condenser surface area: 10.89m². Machine dimensions X/Y/Z: approx. 2200mm/4600mm/2100mm, empty weight: approx. 3150kg. 2) Dry cooler (free cooler) GQ2590.BX, recooling capacity: 233kW, volume flow: 34.9m³/h, air volume: 129000m³/h, surface area: 1844m². Machine dimensions X/Y/Z: approx. 9300mm/2400mm/1600mm, empty weight: approx. 1750kg, working hours: over 70000h. The changeover valve of the compressor of the free cooler is defective. Documentation available. On-site inspection is possible. Crodpev Ip Tdefx Aktei

Condition: good (used), Year of construction: 2017, Lennox CAC160DM1M Refrigeration plant Serial: 10090777ES03170615 Crsdpfxoqqiynj Aktji 2017, Four fan system, two compressors and heat exchanger

Condition: used, Year of construction: 1998, Refrigeration plant with 70 kW complete with compressor, condenser, in-house cooling tower, plate heat exchanger for glycol cooling and control cabinet. Refrigerant: Ammonia Additional title: Refrigerant: Ammonia Cooling capacity: 70 kW Design to: -8 °C Crjdpszty Iljfx Aktji Design tc: 27 °C Power: 15 kW Operation / Control: Control cabinet with hardware control Features: Compressor, condenser, plate heat exchanger, glycol cooler, in-house cooling tower, control cabinet

Year of construction: 2021, condition: ready for operation (used), Two identical Hyfra refrigeration units are available. Cooling capacity: 25kW, refrigerant: R410A, refrigerant charge: 4kg, max. operating pressure: 42bar, medium: water, pumps process/standard: 2/2, pump type: CM3-4/CM5-5. Machine dimensions X/Y/Z: approx. 1650mm/750mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Codpfx Asxr Nwmjktsri

Condition: good (used), Swegon Ucame101 refrigeration plant Csdpfxeqqhrdj Aktjri Serial: bfrs022020 Single fan unit

Condition: used, Refrigeration system with NH₃ in the primary circuit and glycol in the secondary circuit. The system consists of the following components: 1. 2 refrigeration compressors for compressing NH₃, of which: - 1 x reciprocating compressor (Sabroe, 2008) with a capacity of 75 kW (used during normal operation) - 1 x screw compressor (Stal, 1991) with a capacity of 75 kW (used as a standby unit) 2. Plate heat exchanger (Alfa Laval, 1997) for evaporating NH3 whilst simultaneously cooling glycol. 100 m³/h of glycol is cooled from 0°C to -3°C. The glycol transports the cold into the process. 3. Condenser for the liquefaction of NH₃ (Evapco, 2002) with a condensation capacity of 620 kW, installed outdoors. 4. NH3 collection tank (EM-Polar, 2009) with a volume of approx. 3 hl 5. Glycol tank, vertical, clad 6. 2 centrifugal pumps for pumping glycol 7. Control cabinet with touch panel as HMI. 8. Various pipework, valves, sensors Additional title: NH₃-glycol cooler as a secondary cooling system; manufactured between approximat Cooling capacity appr: 300 kW Cedpszizkgjfx Aktjri Operation / Control: Simatic S7-1500 (manufactured in 2022) Features: 2 x refrigeration compressors; plate heat exchanger (evaporator/glycol cooler); condenser; NH₃ tank; glycol tank; 2 x glycol pumps; control cabinet with touch panel; various pipes, valves and sensors

Condition: new, Year of construction: 2023, Chiller unit with 25 kW cooling capacity at 7/12°C, internal P3 pump, internal buffer tank with 110 liters, scroll compressor, coaxial evaporator for process applications. Cjdpfx Akegkan Sjtori

Year of construction: 1999, condition: used, Ice water generator for cooling supply of wort cooler (2nd stage), fermentation cellar (= 100 hl capacity), storage cellar (= 320 hl capacity) and pressure tanks (= 260 hl capacity) in a microbrewery with 20 hl output. Additional title: ice water generator Cooling capacitry: 14 kW Power: 6,2 kW Length: 1600 mm Cedpfxsxwy Sfo Aktori Width: 1600 mm Height: 1800 mm Position: free standing Base construction: cylindrical tank with refrigeration unit on top, on square tube frame with domes Features: insulated stainless steel tank with side cover, semi-hermetic reciprocating piston compressor, copper tube coil exchanger, control box, cooling water pump

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Codpjwcwbqjfx Aktori

Condition: like new (used), functionality: fully functional, fuel type: electric, Year of construction: 2020, Used crushing and screening plant for sale, backed by the Fabo guarantee; fully maintained and ready for operation. Suitable for processing soft to medium-hard stone, with a high production capacity for sand-rich output. Cedpfxs Ah E Eve Aktjri Our plant consists of the following components: 30 m³ rock feed hopper PDK-140 primary impact crusher Cubitzer Impact crusher (secondary) 120-series tertiary crusher 2000x6000 mm vibrating screen 800x4000 mm conveyor belt 800x20000 mm conveyor belt 800x12000 mm conveyor belt 600x15000 mm conveyor belt 600x10000 mm conveyor belt 600x10000 mm conveyor belt

Year of construction: 2026, condition: new, FABO Mobile Scalper screen is produced for aggregate producers who require higher productivity and versatility. The machine can be used for multiple purposes; it can be used as a heavy-duty incline 2 deck screen, capable of stockpiling, scalping before and after crushing units, or it can be used a standalone system as well. That is why FABO tracked mobile scalpers can separate the hardest materials. FABO Mobile Scalpers helps our customers to maximize productivity while on the other hand helps on reducing the production costs. - - - Technical Specifications of the Tracked Scalper Screen: - *Bunker capacity :7m³ - *Production capacity : 220 – 400 Tons per hour - *Vibrating Screen Size : 1530x4800 mm - *Total Power : 110 kvA - *Screen Media : Punch Plate, Grizzly, Bofors Cedpfxjzfp Daj Aktjri - *Weight : 31.000 kg - *The screen angle varies between 18-27°.

Year of construction: 2026, condition: new, functionality: fully functional, FTS 15-60 is a compact and heavy steel structured trucked plant with three-decks screen. Also integrated with tracked moving system and robust structure. Works via conveyor belt system. The fully electrically driven plant is designed in a variety for maximum capacities and suitable for feeding materials with a maximum edge length of 200 mm. All functions, as well as subsequent and previous crushing plants, conveyor belts, etc. are electrically lockable. • Production capacity: 500-600 TPH • Screen dimension: 1550x6100mm • Mobile three-decks screen • Diesel electric drive • Classifier screen plant up to 4 final fraction sizes Maximum feeding size 100 x 160 mm Csdpo Ahyatofx Aktjri

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, TECHNICAL DETAILS Process Flow Continuous feeding of copper wire via an automatic double unwinder with flying splice capability Inductive wire preheating for moisture removal and improved adhesion Full insulation using a Rosendahl Automotive main extruder and a highly precise crosshead die Cooling and extraction Multi-stage, temperature-controlled telescopic water cooling trough for stress-free solidification of the plastic Synchronized precision caterpillar puller for consistent line speed Quality assurance and winding Laser diameter and ovality measurement Eccentricity measurement for monitoring consistent wall thickness High-voltage spark tester for real-time fault detection Uninterrupted winding onto process drums MACHINE DETAILS Machine type: High-speed full insulation line Design: Fully automatic system for thin-walled vehicle lines Year of manufacture: 2020 EQUIPMENT Automatic double unwinder with flying splice capability Inductive wire preheating Cjdjz N A Npopfx Aktjri Rosendahl Automotive main extruder Highly precise crosshead die Temperature-controlled telescopic water cooling trough Precision caterpillar puller Laser diameter and ovality measurement Eccentricity measurement High-voltage spark tester Automatic double spool winder

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. Csdpfeq Ngb Dox Aktori 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Condition: used, Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, machine/vehicle number: HS6434, path measurement accuracy: 620 mm, type of input current: AC, total width: 620 mm, total length: 3,820 mm, total height: 700 mm, overall weight: 300 kg, input voltage: 230 V, The Cox & Plant HS6434 is a high-performance, industrial-grade electromagnetic vibratory conveyor designed specifically for the hygienic handling of bulk solids, particulates, and fragile products. Manufactured in 2015, this unit represents the pinnacle of Cox & Plant’s specialist engineering in efficient, low-maintenance food and chemical processing technology. Utilizing a precise 6mm stroke amplitude driven by heavy-duty electromagnetic coils, the system offers instantaneous start/stop control and eliminates the mechanical wear components (like belts, bearings, and eccentric drives) common in traditional conveyors. Cedpfezz Ax Asx Aktori

Condition: used, Year of construction: 2017, COMPLETE HOOKAH TOBACCO PACKAGING PLANT - TWO LINES + MIXING EQUIPMENT Fixed package: two complete, lightly used hookah (shisha / molasses tobacco) packaging lines with all support equipment, sold together as one lot at one price: - 50g line: up to 120 packs per minute, built 2017, European (mainly Italian) machinery - 250g line: up to 40 packs per minute, built 2018, U.S. and European machinery - Barrel mixing, barrel loading and storage equipment, spare parts and dosing screws Each line runs from bulk tobacco feeding through dosing, flow-pack sealing, check weighing, cartoning and film wrapping. The lines were used from 2017-2018 to 2019 and have been idle since 2020. Cedpfxez Rtwaj Aktjri Location: Gaithersburg, Maryland, USA. Available for inspection by appointment. Reason for sale: the owner stopped plans for U.S. tobacco production because of FDA regulatory requirements. The equipment is not being sold because of any fault. LINE 1 - 50g LINE - UP TO 120 PACKS PER MINUTE (BUILT 2017) 1. Main control cabinet (HMI + PLC) - synchronizes the complete line 2. Manual loading table and feed hopper with twin augers 3. Dosing machine - GB Automazioni (Italy), screw/auger dosing 4. Horizontal flow-pack machine - sealed 50g pouches 5. Inline checkweigher 6. Cartesian robot loader 7. Stepper (indexing) conveyor 8. Case box machine (cartoner) with its own control panel 9. Carpet transfer conveyor 10. Box wrapping machine - film overwrap of each carton 11. Superimpose box unit - carton grouping and stacking 12. Case cross box machine - GB Automazioni (Italy) 13. Overwrapping cross machine - film overwrap of carton bundles 14. Roller exit conveyor LINE 2 - 250g LINE - UP TO 40 PACKS PER MINUTE (BUILT 2018) 1. Material feed hopper 2. Dosing machine - GB Automazioni (Italy) 3. Horizontal flow-pack machine - Delfin 4. Inline checkweigher - Mettler Toledo 5. Stepper conveyor 6. Case box machine (cartoner) 7. Carpet transfer conveyor 8. Box wrapping machine - Barrington Packaging Systems (USA) MIXING AND STORAGE EQUIPMENT (INCLUDED) - 2 barrel mixing / tumbling machines with control panels - Barrel loading machine (lift and tipper) - Blue storage barrels - Stainless steel storage tubs with lids SPARE PARTS (INCLUDED) - Interchangeable dosing screws in several sizes (for setting pack weight) - Spare parts and stainless steel fittings ELECTRICAL AND UTILITIES - 50g line: 220V / 60Hz, 3-phase + PE, approx. 22.5 kW total across 7 supply points (see layout drawing) - 250g line: electrical details available on request - Pneumatic components: compressed air supply required - The equipment has been operated on U.S. 60Hz power DOCUMENTS AVAILABLE - Brochure for each line - 50g line layout drawing with power supply schedule - Additional photos - Videos of the lines running in production and recent walk-arounds PRICE AND TERMS - USD 550,000 for the complete package as described (both lines + mixing and storage equipment + spare parts) - Sold as-is, where-is (EXW Gaithersburg, Maryland) - Buyer arranges rigging, crating and shipping unless otherwise agreed - Inspection welcome: in person, by video call, or by a third-party inspector

Condition: excellent (used), 1 x Oddy Novatek 2 Roll Plant Credpfx Ajy Hk Daektei

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: Cedpfxjq Nyuve Aktori - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, At FABO, we design and install stationary type stone crushing and screening plants tailored to meet our customers’ specific requirements. The production capacity of our stationary plants varies between 100 and 1000 tons per hour. Crushing & Screening Plant with 250–350 TPH Capacity: • TBX-35 / Vibrating Feeder Bunker – 1 unit • TE-1430 / Intermediate Screen (1400x3000 mm – 2 decks) – 1 unit • PDK-130 / Primary Impact Crusher – 1 unit • TE-2060 / Washing Screen (2000x6000 mm – 3 decks) – 1 unit • TK-100 / Tertiary Crusher – 1 unit • TE-2060 / Vibrating Screen (2000x6000 mm – 3 decks) – 1 unit • Hydraulic Unit for TK-100 Credpfxeyzxcts Aktsi • Hydraulic Unit for PDK-130 • Conveyor Belt System (widths: 1000 mm, 800 mm, 650 mm) • Control Cabin, Electrical Panel, Control Panel, and Automation System All our products are manufactured with great care and come with a 1-year warranty. Installation and Operator Training are FREE of charge! FOR MORE INFORMATION, PLEASE CONTACT US!