Category of technical means: construction machine
Type of technical means: Screen
Model, Type: WARRIOR 1800
Employed: 4,252 mtg
Year of production: 2008
Own weight: 30,000 kg
- length 15.52 m
- 2.9 m wide
- 3.4 m high
Engine power: 83 kW / 112 hp
Number of screens: 2 decks
Container basket capacity: 6.78 m3
Machine for sifting spoil for individual fractions. It can be used to acqui... more
E drive + task band with frequency converter and load-dependent control + mutton mill (electric motor 22 kW) with Strainer basket (currently holes 22 mm / more available) + 2 deck screen machine (currently 04 + 4/10 + 10/22) + 3 discharge conveyors m. magnetic separator + AVS - diesel power generators () IVECO / 2,832 hours) + hook lift frame
Year of production: 2008
Own weight: 46384 kg
- length of 15750 mm
- width 4000 mm
- height 4100 mm
Engine power: 261 kW
Yield: max 350t / h
Equipment: side scraper, CAT 261 kW engine, magnetic separator, tracks 50cm, central lubrication, Sandvik s/n: 9220.
Work time: 5969 hrs more
Crawler + approx. 70 t + CAT diesel 3408 + impact crusher MK 205 + Einlaufoeffung 1,020 x 1.260 mm + 4 blow bars + 2 impact vibration + throughput up to 400 t / h + no parent band magnetic separator + no Stahplattenfoerderer (direct feed!) + transport dimensions: length 16.45 m x. Width 3.2 m x height 3.65 m + in need of repair status: stock of clutch and fly wheel require renewal (approximately 10 T€)
Tracked undercarriage + Iveco diesel 280 hp + ca. 32 t + hdraulisch folding bunker walls + prescreening + sideband (dismantled) + impact crusher Hartl inlet 1000 x 600 mm + overbelt + Transport mass L 11.3 mx 2.4 mx H 3.43 m B new bearings + good, operational state + new engine before 1,350 operating hours + beater bars new + New belt + Turboclutch
13.302 hours of operation (engine) & 10.332 operating hours (Crusher) + track + CAT diesel C9 + approx. 36 t + transport dimensions L 14.2 m x W 2.8 m x H 3.4 m + feed hopper with hydraulic. foldable bunker walls + vibration feeder with pre-screening (currently covered) + hydr. Folding side band + ES Jaw Crusher Nordberg C105 1,060 x 700 mm + excess band magnetic separator
2014 Sandvik QJ341 Tracked Jaw Crusher c/w Over Band Magnet, Side Discharge Belt
This machine will be sold by Euro Auctions at an unreserved auction in Dromore, NI on 15TH and 16th December 2017. For more information go online. more
1 PCs. gebr. Single element large breaker heavy duty manufacturers Müller, Rottweil
Type 2 x 1250 width 1250 x 900
Capacity of up to 110-3oo t/h according to gap
Mass approx. L = 3.90 m B (with Antr.raedern) 2, 60 m H (about everything) = 3.60 m
To weight approx. 38.
E engine 132 kW
Machine type jaw crusher on truck
- Single-arm jaw crusher 1100 x 650 mm
- Main discharge belt belt 1,000 mm, discharge height approx. 3.900 mm
- Weight 47 to
- Transport mass L = 15.37 m / W = 2.80 m / H = 3.42 m
- built in 2008
- Operating hours 3730
- Price on request
- Feed funnel content 10.0 cbm with funnel extension
- Vibratory feeder with 2-deck pre-screening
- Hydraulic crushing gap adjustable from 50 - 175 mm
- CAT diesel engine C.9, 172 kW, Tier III
- Chain running ... more
Opening: 1.000 x 650 mm, endproduct: approx. 0/70-0/200 mm, capacity: up to 200 t/h, feeding bunker 6 m³ with vibrating feeder, diesel-drive with generator, side- and main-conveyor, overband magnet separator, weight: approx. 41 t., jaws as new
Krupp Kubria cone Crusher type 91-20, including replacement tool
with console, scrapped.
Main dimensions: 1320 x 1320 x 1595 mm
Intake opening: 1130 mm Ø
Feed material: natural stone, Pebble grain
Task grain size: 45-160 mm
Capacity: 0-45 mm, approx. 110 t / h depending on the material and slit adjustment slit width: 25-33 mm
Motor power: 90 KW at 1,500 min-1
Width: 200 mm
Weight: 10500 kg
1 used ball Mills, manufacturer: MIAG Germany
Pipe length of 11.00 m pipe diameter 1.80 m
Capacity 10 t/h
Complete with storage, electric engine 360 KW, Flender gear type TE 750, control, control cabinets
Approx. 25 to balls + armor plate + screws for armor plates + many spare parts
The ball mill is very high quality and stable.
All components (transmission, storage, cylinder, control, etc)
are professionally has been dismantled and reverse loading done.
Model : VSI-900-CR
Max. Feeding Size : 45 mm.
Rotor Size : Ø900 mm.
Rotor Speed : 50 - 70 c/sec.
Capacity : 80 tons/h for fine material (0-5), 250 tph overall capacity.
Motor Power : 320 kW
Weight : 15 tonnes
Please contact for more information.
Rockster R1100 S with fully hydraulic gap adjustment
Intake opening: 1100 mm x 720 mm
Rotor version: beam 4
Throughput: up to 400 t / h depending on the material
Drive: hydrostatic with belts
hydraulically foldable for transport, hydraulic tweeter
including magnetic separator CP20
incl. RS 114 sieve box for R1100 S (serial No.: 114211)
incl. RB95 return conveyor for R1100S (serial No.: 95211)
Engine Volvo Tier4
Availability: short term
Errors and typogra... more
-1- used double toggle jaw crusher, inlet approx. 800x355 mm, capacity 30-50 t/h. Usefull for hard rock, wear parts approx. 85% good, crusher turns easily by Hand. YOM unknown because no type plate.
Feed Hopper (HARDOX) vibrating chute with 2-stage VorabsiebungPermanentmagnetabscheider radio remote control soundproof MotorverhausungL 14.1 m, B 2.50 m, H 3.27 mDurchsatz up to 240 t / hEinlaufoeffnung: 900 x 720 mmAntrieb cat Crusher drive: hydrostatic
Sandvik Jaw Crusher QJ241
Caterpillar diesel motor C6. 6 DIT 225 HP EPA TIER 3
Sandvik swinging jaw crushers
Hydraulic folding bunker walls
Hydraulically driven page conveyor (screening)
Hydraulic driven main band
Excess Ribbon magnet
Dust suppression system
Radio remote control
Central lubrication system for breaking plant
electric fuel pump
Stepped Grizzly, 35-55 mm gap width
1 used impact mill installation on supports
Manufacturer O & K type 4/A 100/125 b. 1988
Betr.STD. lt counter approximately 4250 h
Feed hopper 5 m ³ Aufgabeschwingfoerderrinne 1.20 m x 3.20 m 2 x 3 kW
Pre-screening vibrating sieve 1,40 x 1.60 m 2 x 3,5 kW 40 mm perforation
Crushers type 100/ 125
Intake opening 1310 x 710 mm
Rotor diameter 1000 mm rotor width 1250 mm
Blow bars 8 PCs.
E-motor 110 kW
Abzugsschwingfoerderrinne 1.20 x 2.10 m 2 x 1.6 kW
Hydraulic system 1... more
Impact crusher Rockster R 1100 S
"The large Crusher with compact dimensions"
Extremely compact and powerful Combi system.
Produces defined final grain in a single operation.
Crusher performance theoretically up to 400 t / h
Installation of wind classifier to the off sighting of possible impurities.
• Built in 2015
• Crushers with 4 blow bars
• Inlet hole 1100 x 720 mm
• Rotor diameter: 1.020 mm
• Drive: Hydrostatic with belt drive
• Rotor speed 0-850 RPM
Crusher Chamber approxi... more
Complete crusher, cone Crusher 36 "Svedala / Allis Chalmers, drive electric motor 90 kW,.
on steel construction, control cabinet, empty measurement siren,.
incl. Crusher hydraulic - control cabinet with cooler,.
1 x hopper 10 m³ with discharge chute, 1 x conveyor A A 20 m, belt width 650 mm,
1 x Crusher underflow,
1 x trigger conveyor belt â 10 m, belt width 650 mm,
ideal as a secondary crusher for task grain size 16-32 mm,.
Boehringer Boekimat BV 1800 x 1,400 mm. Jaw Crusher
KLEEMANN SStR 1400 x 1130mm. Jaw Crusher
Sandvik / AUBEMA 1810 / 80 H. 1000 x 800mm. Jaw Crusher
Weser hut 1000 x 700 mm. Jaw Crusher
Brown Lenox KK 95. 915 x 610mm. Jaw Crusher
Neyrtec / Neyrpic 820 x 640mm. Jaw Crusher
Ibag's 800 / 570 mm. Jaw Crusher
Bergeaud VB 67. 670 x 410mm. Jaw Crusher
MERX 600 x 400mm. Jaw Crusher
Bergeaud / [...] 450 x 250mm. Jaw Crusher
KLEEMANN MOBICAT MC 110Z MOBILE JAW CRUSHER
crushing hours: 923 read-off
- fully mobile jaw crusher on tracks incl. double pre-screen
- engine Scania Diesel DC9 with 266 kW/362 HP
- remote control
- single toggle jaw crusher 1.100 x 700 mm
- capacity up to 300 to/h
- width 3.000 mm
- hydraulic setting adjustment
- side conveyor
- weight: 47.300 KG
This offer is subject to change, input errors and mistakes.
Valid are only the specific agreements in the order ... more
with 3 hammers to the shredding of abrasive materials such as gravel and granite, as well as all kinds of slag.
Item size: 20-80 mm
Capacity: 35-45 m³ / h
Speed: 800-1,000 rpm.
Weight: 5.600 kg
Power consumption: 75-90 kW
Special features: sturdy construction. Easy maintenance and monitoring through inspection 4-door. Simple gap adjustment by screws. Highly wear-resistant alloy of crushing and impact tools. Quick and easy replacement of wear parts.
Including vibratory feeder.... more
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.