The BTS-Oil Filter Crusher / Can Crusher was designed for hard materials like oil filters of cars, trucks, commercial and farmery machinery, also for food and spray cans. Crusher allows increasing the volume reduction of up to 90%, thereby reducing disposal costs. Compacting creates an enormous volume reduction, available storage and cargo space so the allowed transport weight can be exploited efficient.
- Can bale a variety of waste products including oil filters, food cans, paint ... more
DIXI baler 6s used unit
Engine: 2 kW
Supply voltage: 380 V / 50 Hz
Pressing force; Max. 60 kN
Preszeit / press cycle: 19 sec. / 29 sec.
Filler (B x H) 680 x 620 mm
Bale size (W x H x L) 700 x 490 x 700 mm
Dimensions (W x D x H): 1000 x 720 x 1920 mm
Weight: 550 kg
Can-Crusher / vertical press / recycling / pneumatic cans press height: 110 cm
Inner diameter 39cm
Good condition fully functional can be visited on site and tried out.
Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity.
For general questions or an appointment for a visit ... more
Series RKK 540 dimension: 2950 x 600 x 1250 mm waste height of Bale: 60 mm drive: 7.5: 3-ph, 380/415v bale dimension: 280 x 280 mm bale weight: 6-22 kg capacity: ca. 500 kg / h iron cans, ca. 250 kg / h aluminium cans machine weight: 1400 kg overhaul
Alternatively also a sorting conveyor can be added, so the aluminium cans directly are separated by the iron doses.
Compaction Force: up to 3 ton
Reduction: up to 90%
Machine Size (LxWxH): 1290x595x1310mm
Chamber Size (LxBxT): 313x267x257mm
Machine Weight: 145kg
- Safety Control System
- Automatic Ejection
- Easy to use
- Single Phase
- Compact size small footprint
- Made in Germany
- Hotels and Restaurants
- Hospitals and Nursing Homes more
Can Compactor BTS-MF60hd
Power Supply: 220-240V (single phase)
Motor: 2.2kW 16 Amp
Pressing Force: up to 13 Ton
Noise Level: 75 decibels
Weight: up to 75kg (depends on material)
• Can bale a variety of waste products including plastic bottles, drinks cans, Paint tins, cardboard and plastic, etc.
• Cross strapping tying system to hold difficult Material... more
Roentgen luggage inspection machine Heimann 6040i with valid approval until 2020 and documentation, immediately ready for use.
The device was used as an exit check for the employees after completion of the shift. The number of uses has been rather low. A fraction of that, like in an airport.
Weaverville, North Carolina more
warehouse no.: 502597
manufacturer: Dr. Boy
Typ: Dr. Boy 55 A
Controller Unit: Procan Alpha
year of construction: 2017
operating hours: 5218 h
The Boy 50A is still almost new and still has a long production life ahead of it. The machine was delivered last year at an original price of around € 44,000.
Now, with a significant savings, you can purchase a readily available Boy 55A.
A new production facility can move into the machine at the end of June 2018.
technical data: Clampin... more
Elect./Voltage: 460 V, 60 Cy, 3 Ph.
CANTEK CFS-100/EM-12 Defector and EM-12 Endmatcher DEFECT AND END-MATCHING SYSTEM consisting of a Cantek model "CFS-100" Optimizing Cut-Off Saw followed by a Cantek "EM 12" Through-Feed End Matcher and with the following specifications and features:Specifications: -- Working dimensions: 4" x 11" or 3.2" x 12" cutting capacity with 18" x 30 mm bore sawblade driven by a 10 HP motor, 3,200 RPM arbor speed; 2.7 HP servo drive feed system drives the... more
12-16 Sandvik QJ341 Tracked Jaw Crusher (970 Hours)
- Choice of 2
This machine will be sold by Euro Auctions at an unreserved auction in Leeds, UK on 23rd-25th May 2018. For more information go online more
Rotor length 830 mm
Rotor diameter 360 mm
Hopper opening approx. 830 x 1000 mm content ca. 1 m 3 cutting tools 40 piece
Motor 22 KW, incl. Turbo clutch
Dust spout 200 mm
other specifications on request
Heavy duty cantilever racking double / single side
Manufacturer: Racks Industries
15 pc. double side cantilever racking
15 stand 203x133x5000 mm
34 base 203x133x1100 mm
98 arm 1100 mm - 1000 kg
- max weight per stand 3000 kg
- max weight per arm 1000 kg
9 pc. double side cantilever racking
9 stand 178x102x4200 mm
20 base 178x102x1200 mm
36 arm 1200 mm - 1000 kg
- max gewicht per staander 2000 kg
- max gewicht per arm 1000 kg
27 pc. cantilever rac... more
Elect./Voltage: 480 V, 60 Cy, 3 Ph.
CANTEK FL-08 Automatic Vertical Finger Joint Line - with the Following: -- MODEL "F-I29-T2" Automatic Infeed Table -- Table Size is 35” long x 23” wide and equipped with 1/2 HP motors. "F-C07" Auto Finger Joint Shaper, Left and Right Sides:Incoming Block Capacity: -- Block Lengths from 5.9” to 35.4” -- Block Widths with Vertical Jointing from 0.78” to 2.36”. -- Block Width with Horizontal Joint up to 6... more
Single head shaper, 9 HP cutterhead, 2 HP trim saw, 1-1/4" cutterhead spindle, 4000/6000/8000/10,000 RPM spindle speed, 8" saw diameter, 5" diameter dust hood, 2" X 8" maximum workpiece, 6" minimum work lengths, unlimited maximum length. Complete with: glue spreader with heavy duty gearhead motor drive, stainless steel glue pan, aluminum discs, scraper fingers (all mounted on floor stand). Assembly press is fully adjustable for 3' to 8' lengths, single hand op... more
Original Scania spare parts Scania spareparts, air springs, brake chamber
Quantity x item number 1 x Scania 1440302 air spring bellows 1 x Scania 1440304 air spring bellows
1 x Scania 1440301 air spring bellows
2 x Scania 1386199 Luftferderbalg 1 x Scania 1427480 spring storage cylinder weight 55 kg
Used FIM SRL single head non cnc sheet metal punch press
Punching capacity 30ton
C frame punch press
Manual / Nc Punch press
Type/Model Versa Vulcano
Similar to an Amada SP30 set press
With plenty of tooling as per photo.
Can be seen working anytime.
AUCTION 2595 - Sale of Pepe Tecnomeccanica and Stephan ricotta and cast cheeses production machinery, storage and drying cells, vacuum packaging machines and jars, food laboratory equipment and accessories and much more.
Online auction on Industrial Discount: 23/05/2018 more
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph.
AMERICAN 25" x 312" Manual Engine Lathe - cleaned, painted and cycled since removal from plant in December 2013. -- Specifications: Swing over ways 25"; Distance between centers 312"; Swing in gap 32"; Swing over carriage 19". -- Spindle bore 2-3/4"; Spindle speeds 6 to 600 RPM; Feed rates 0.0040 to 0.240. -- Threading from 1/2 to 30 TPI; Main motor 30 HP. -- Equipped with: 24" 4-Jaw chuck, 17" Steady rest, Tailstock, Taper attachment,... more
Speed: up to 61 ppm (A4), up to 33 ppm (A3)
Resolution: 1.200 dpi
Interface/Controller: Fiery Server A2200 inklusive GA Package, Faci Kit
Additions:Pod Deck A1, Finisher AJ1, Eye-One Spectrometer, Full service more
LBL Brenta log bandsaw line
Type Bibat 1400 Tandem + CT600 + FL
- Length transport with outfeed system
- KEBA cubic log measuring system
- Cross chain transport
- Log carriage , type FL
- Rope feeding unit for log carriage
- Control cabin with Evolution II controller + Microtec Optiline
- Canter, type CT600
- Tandem bandsaw machine, type Bibat 1400
- Outfeed roller conveyor
- Cross chain transport for boards
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.