Used Splitter for sale (152)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HS-14E, overall weight: 185 kg, total width: 135 mm, total length: 144 mm, total height: 228 mm, fuel: electricity, SCHORR Log Splitter 14t HS-14E PRO Where conventional electric splitters with 12 tons reach their limit, the HS-14E goes further: 14 tons of splitting force drive the splitting wedge through hardwood, dry and knotted logs, evenly and without jamming. The powerful hydraulic cylinder with a 9.5 cm diameter reliably delivers the pressure, stroke by stroke. Splitting is done vertically with a splitting length of up to 104 cm: meter-long logs fit with room to spare, as do shorter sections from 56 cm. This allows you to quickly work your way through the pile of logs, piece by piece. The most strenuous part of the splitting process is not the splitting itself, but lifting the logs. The HS-14E is equipped with an integrated log lifter specifically for this purpose: hook the log, lever it, and the section aligns itself effortlessly into the splitting position, without straining your back and shoulders. When not in use, the log lifter serves as a stable protective bar on the machine. Operation is performed via the two-hand safety control, and the massive, robust design with a weight of 185 kg ensures a secure stand, even at full splitting force. The HS-14E does not require a tractor or a power take-off: the 400 V electric motor with 3.5 kW is connected to the standard 16 A socket and delivers its power quietly and without emissions. This allows you to split wood in the barn, in the hall, or on the farm, where gasoline engines would be disruptive and a tractor is not available. The technology is deliberately kept simple, robust, and repairable: hydraulics, steel frame, electric motor – no unnecessary frills. The HS-14E is delivered pre-assembled and with hydraulic oil already filled: simply connect it and start splitting. Wear and replacement parts are in stock, and we handle repairs in our own workshop. You buy directly from the manufacturer and receive personal advice. And for those who want to combine a power take-off and electric power, the HS-22PE with 22 tons is the larger model. Technical data -- Manufacturer: SCHORR -- Type: HS-14PE -- Splitting force: 14 t -- Weight: 185 kg -- Drive: 400 V electric motor (3.5 kW, 16 A) Dimensions: Bjdpezwmypefx Afxell -- Length: 1440 mm -- Width: 1350 mm -- Height: 2280 mm -- Splitting wedge: 17.5 cm -- Splitting diameter: max. 30 cm / min. 10 cm Your advantages at a glance -- Ready for immediate use – no long waiting time -- Massive design – 185 kg weight for maximum stability -- Comfortable log lifter for heavy wood -- Spare parts always available -- Competent service & advice Whether delivery or collection in 48465 Schüttorf – we offer the right solution.

Condition: new, Year of construction: 2025, Vertical design for splitting short and long logs Low base plate for easy and strain-free loading of large logs Mechanical log lifting device brings heavy logs into position while protecting the back Equipped with a log catching bracket Quick, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Convenient transport with a manual drawbar, thanks to the standard chassis with hard rubber tires and an additional support wheel Impact and scratch-resistant due to high-quality powder coating Space-saving storage due to the easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/Depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type: Electric motor Bljdpfxshkz Hme Afxsl Power consumption: 3.5 kW Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Device data Splitting force max.: 14 t Splitting length min.: 560 mm Splitting length max.: 1040 mm Log diameter min.: 100 mm Log diameter max.: 300 mm Hydraulic system Hydraulic oil tank capacity: 7.5 l Location: In stock at 54634 Bitburg - available immediately - Subject to prior sale.

Condition: used, machine/vehicle number: VA9000ZZZN1P00227, This Posch wood splitter, mounted on an axle and powered by a gasoline engine, will be auctioned off online in our industrial auction/machine auction for clearing out warehouse stock: Schnelle & Co. Ebi GmbH – construction equipment, power tools, accessories. You will find this and many other items on our platform. Bljdpjzv Sdwsfx Afxsl

Condition: excellent (used), CTI FoodTech 320 APA Automatic Fruit Slicing and Pitting Machine – Stainless Steel The CTI FoodTech 320 APA automatic fruit slicing and pitting machine is designed for the industrial processing of fruit through automated slicing, opening, and pit separation operations, reducing manual handling and providing a continuous and uniform process. The equipment features a feeding and conveying system that positions the fruit pieces to automatically perform the slicing and pitting operations. Its configuration allows simultaneous operation with multiple pieces, making it particularly suitable for industrial fruit processing lines. Its construction, primarily in stainless steel, and its hygienic design allow for use in canning plants and fruit processing facilities. MAIN FEATURES - Manufacturer: CTI FoodTech - Model: 320 APA - Type: Automatic fruit slicing and pitting machine - Functions: Slicing, opening, and pitting - Automatic and continuous processing - Controlled product feed - Multiple processing positions - Individual piece positioning - Automatic cutting system - Pit separation - Continuous product transport - Construction primarily in stainless steel - Safety guards - Hygienic design for the food industry - Integrable into industrial fruit processing lines Blsdjzxcauopfx Afxsl APPLICATION The CTI FoodTech 320 APA is designed to automate the preparation of stone fruit before subsequent processing or packaging operations. The fruit is fed and positioned individually in the conveying system. As it moves along, the equipment performs the necessary operations to slice the product and separate the pit from the pulp, producing fruit that is ready to continue to the next stage of the process. It can be integrated with: Fruit feeding systems Washers Sizers and graders Peelers Inspection belts Cutting equipment Scalding or cooking systems Freezing Fillers and packaging machines Complete fruit processing lines APPLICATIONS Especially suitable for canning industries, fruit processors, frozen fruit manufacturers, and fruit and vegetable processing plants that need to automate slicing and pitting operations. Depending on the installed format and configuration, this type of equipment is intended for the processing of stone fruit, preparing the product for canning, freezing, further processing, or packaging. The combination of CTI FoodTech technology, model 320 APA, and automatic processing provides an industrial solution for fruit preparation and pitting lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), functionality: fully functional, Year of construction: 1916, Binderberger horizontal log splitter 30 t Bedjyglm Uopfx Afxjll

Condition: new, functionality: fully functional, overall weight: 650 kg, The Japa® 315+ with electric drive offers a wide range of functions and high capacity in a compact, mobile unit. We have increased the capacity – the maximum wood diameter is now 31 cm, and the length is 50 cm. Technical specifications: Log diameter: 310 mm Splitting force: 5.6 tons Splitting wedge: 4-way Bedpfx Asxx Szhofxjll Log length: up to 50 cm Oil capacity: 30 l Motor output S1: 4 kW / 400V Weight: 600 kg Dimensions: 4060 x 1330 x 2580 mm Original photos & honest descriptions. Shipping available upon agreement. Fair prices. Price for basic version, demonstration model – optional equipment extra. ❓If you have any questions, please don't hesitate to contact us – we will respond quickly and courteously!

Condition: used, Holzkraft HSE 5-520 KH log splitter for the convenient and safe splitting of short logs for domestic or semi-professional use. Its compact design and ease of use enable efficient work even in confined spaces. Ideal for preparing firewood. Bsdpozrx E Hjfx Afxell Technical data: - Splitting force: 5 tonnes - Length of material to be split: max. 520 mm - Diameter of material to be split: max. 250 mm - Power source: 230 V electric - Weight: approx. 50 kg

Condition: used, machine/vehicle number: 003935, Max Panel Width: 1200 mm Bedpfx Aswucknjfxell Max Panel Length: 40 mm Max feed speed: 60 m/min Operating Units: 3 nr

Condition: like new (used), Hydraulic log splitter, working Bledpfx Asfin Rgefxjl Details on request

Condition: new, Year of construction: 2026, Motor power: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Maximum roll length: 1500 mm - Maximum roll diameter: 1250 mm - Machine weight: approximately 3800 kg - Tank capacity: approximately 110 liters - Hand protection grille in the area of the control panel and on the opposite side - Knife locking mechanism - Straight design slitter table - Documentation: 2 copies in German (1 printed, 1 on USB) Bodpfoltmi Sex Afxsll - Color: RAL 5012 - light blue Protective grille/knife beam: RAL 1028 - melon yellow Machine in stock, immediately available Price and further information upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, fuel: super 95, cutting length (max.): 600 mm, Automatically saw and split wood with the RM480-B from H&R. The H&R Log Splitter RM480-B is the ideal assistant for your firewood preparation. The new 2026 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to the innovative design and powerful hydraulic system, work with this splitting machine becomes significantly easier – perfect for professional forestry operations and ambitious DIYers. Unlike competitors, the RM480 from H&R features FULLY hydraulic operation for ALL functions, allowing the work to be completed faster and more easily. Product features RM480-B Performance: The splitter is equipped with a powerful 15 HP petrol engine (RM 480 B). Alternatively, it is also available with a 13 HP electric motor (RM 480 E). Log length and diameter: Logs up to 3 metres long can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar. The hydraulic log clamp ensures secure fixation of the wood during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the supplied 4-way and 6-way splitting wedges – for flexible splitting patterns and individual adaptation to your needs. Conveyor belt: The newly designed 2.2 m feed belt facilitates log loading, while the laterally pivoting discharge belt makes transferring the split wood effortless. Mobile use: The splitter weighs only 750 kg including the trailer, and thanks to its practical transport frame, it can be moved by hand without difficulty. Easy operation: All functions can conveniently be operated hydraulically, making it suitable for extended operating periods. At a glance • Sawing, splitting, and discharge in one working step • All functions hydraulically controlled • Efficient, powerful engine • Splits wood up to 48 cm in diameter and 60 cm in length • Logs up to 3 m long (up to 6 m with accessory table!) Price Petrol engine (15 HP) RM 480 B (net) €7,385.71 Electric motor (13 HP) RM 480 E (net) €7,550.00 Additional options With the optional lifting table or chain conveyor, logs up to 6 metres in length can be effortlessly processed. Technical details Weight (incl. trailer): 750 kg Freight cost: €300 (transported in steel frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. log diameter to split: 48 cm Max. log length to split: approx. 60 cm Max. log length: 300 cm Engine: Petrol, 15 HP Displacement: 420 cm³ Engine oil: 10W30 Hydraulic oil: 46 Hydraulic connections and control levers are already preinstalled, so the machine is ready for operation within a very short time. Benefit from the powerful and well-designed technology of the H&R log splitting machine RM 480. Order today and make your firewood processing more efficient, safer, and more convenient! Bodeu Dnruepfx Afxell

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush Blsdpfxjuph Uxo Afxel - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Bedoupiapjpfx Afxell Total weight 100 kg

Year of construction: 1999, condition: good (used), Machine number: 188522 40 Built in: 1999 Size: max 510 x 320 x 60 mm, min 200 x 72 x 3 mm Bljdpfjpbv Nmjx Afxol

Year of construction: 1998, condition: ready for operation (used), Built in 1998 Size max 510 x 305 mm min 250 x 100 mm Book block thickness max 5-80 mm Bjdpfx Afjd Hp I Nsxell Speed max 20.000 c/h

Year of construction: 2004, condition: good (used), Built in 2004 Size: max 510 x 320 x 60 mm min 200 x 72 x 3 mm Blsdpfx Afod Sppaexjl Equipment • turnover belt

Condition: ready for operation (used), Size max 520 x 250 mm Blsdpfx Asd Nzwvofxel min 240 x 100 mm Book block thickness max 60 mm min 5 mm Speed max 20.000 c/h

Condition: excellent (used), Machines belonging to the LINE (Ref. SOFIT code : YZ0900) Splitting Saw Machine (used to split in two parts the unique workpiece-panel) Minimum length of the workpiece: mm 250 (ca.) Bljdpsf N Ngbsfx Afxel Maximum length of the workpiece: mm 3000 (ca.) Minimum width of the splitted workpieces: mm 120+120 (ca.) Maximum width of the splitted workpieces: mm 600+600 (ca.) Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) Max forward speed: m/min 60 Along with the following groups: Lower Scoring Unit (power KW 3) max saw diameter mm 350 Upper Bevel Trimming Unit (power KW 3) max diameter mm 300 Main Sawing Unit (power KW 11) max diameter mm 450

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts one unique panel) - Minimum length of the workpiece: mm 250 (ca.) - Maximum length of the workpiece: mm 2700 (ca.) - Minimum width of the workpiece: mm 124 (ca.) - Maximum width of the workpiece: mm 1200 (ca.) - Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) - Max feeding speed: m/min 50 (ca.) - Total installed power Kw 82 Along with the following groups: POS. 1 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 2 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 3 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) Bljdpfx Aoyx S N Uefxjl POS. 4 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 5 Lower main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) POS. 6 Upper main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) OPTIONAL: soundproof and safety enclosure (cabine)

Condition: new, Year of construction: 2026, Professional 8-Ton Log Splitter – Robust Construction and Long Service Life The professional 8-ton log splitter is designed for efficient wood splitting with maximum reliability and durability. Its solid construction and high-quality splitting wedge ensure long service life and trouble-free operation. The machine is intended for splitting logs with a diameter of up to approximately 450 mm. Its stable and robust design provides excellent performance and consistent results. The splitter is equipped with a hydraulic cylinder featuring an automatic piston return function, ensuring smooth and efficient operation. Device description Side support tables included – make feeding and positioning logs easier. Powerful and reliable 230 V electric motor – rated power of 3.0 kW, with temporary power increase up to 3.5 kW during heavy-duty operation. Safe operation compliant with EU standards – equipped with a two-hand control system for increased operator protection. Hydraulic system filled with 4 litres of oil – the machine is ready for immediate operation after purchase. Angled splitting wedge – improves wedge penetration into the wood. 4-way splitting wedge included as standard – allows splitting logs into four pieces in a single operation. Adjustable stop rod – allows the return height of the wedge to be set according to user requirements. Hydraulic oil level indicator – enables easy monitoring of the oil level. Transport wheels – provide convenient movement of the machine. Bedpfx Aeridpaefxjll Operating manual included. Comfortable transport handle – simplifies handling and relocation. Recommended hydraulic oil viscosity: HL32. The original, reliable hydraulic pump ensures long-lasting and maintenance-free operation. Reliable hydraulic pump! Technical specifications Parameter Value Motor 3 kW (4.1 HP) / 230 V Splitting force 8 tons Maximum log length 520 mm Log diameter range 80–450 mm Wedge feed speed 0.029–0.04 m/s Wedge return speed 0.15 m/s Maximum hydraulic pressure 265 bar Hydraulic oil tank capacity 4 l Overall dimensions 1070 × 800 × 1500 mm Weight 120 kg

Year of construction: 2024, condition: new, LITech riffle splitters are used to accurately divide laboratory samples such as sand, gravel and similar materials. Designed for large capacities, the RS 100 riffle splitter qualitatively and quantitatively divides your laboratory sample quickly and easily. You can effortlessly set the following sizes: 12 - 24 - 36 - 48 - 60 - 72 - 84 - 96 - 108 mm. The scope of delivery includes a 26 litre feed funnel and 2 collecting trays. Blsdpfxegi A Nxs Afxol

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. Bjdpey N Rlvefx Afxoll The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: excellent (used), Year of construction: 2012, operating hours: 10,700 h, functionality: fully functional, The Jama SBU 8000 machine from 2012 is a robust and proven mechanical scaler, specifically designed for operation in demanding mining conditions, especially underground workings. This model is equipped with a hydraulic breaker for rock demolition, making it the perfect tool for removing loose rock fragments and preparing tunnels for further work. The listed machine comes fitted with an EPIROC breaker, including an additional new chisel. Attention! At the dealer, the price of a brand new JAMY machine is as much as €903,000 NET! That is for the machine only, without any additional equipment such as a demolition hammer. - We have 2 identical SBU 8000 machines on offer. The one in this listing is from 2012, and the other is from 2008 and nearly €10,000 cheaper! Also available: JAMA machine for concrete spraying in tunnels Designed for finishing and reinforcement work in underground passages and tunnels High efficiency, precise spraying and large operating range Bodpfx Afewl Izaexell Ideal for use in mining, tunneling and major infrastructure projects Key Technical Features – Jama SBU 8000 Weight: approx. 30,000 kg Dimensions: length 15 m, width 2.75 m, height 3.1 m Boom reach: from 3 m below machine level to 9 m above, and over 6 m sideways Operator cabin: complies with FOPS standards, fitted with an armored front window and hydraulically controlled explosion-proof guard Chassis: two axles, turning radius 5.2 m Stabilization: four stabilizing outriggers and a front dozer blade Safety system: 'Danger Mode' function allows rapid machine retreat in case of danger Operator Comfort and Ergonomics The operator’s cabin is designed for maximum comfort and safety: Operator seat: pneumatically suspended Controls: joysticks integrated in armrests Visibility: 13° tilting cab for improved worksite visibility Additional features: boot washer at the entrance, doors with gas struts enabling quick cab exit if necessary Currently, we have three similar machines available: 2x Jama SBU8000 – 2012 & 2008, both with EPIROC breakers 1x Jama machine for concrete spraying Technical Specifications – Deutz TCD 2013 L04 2V/m Engine type: Four-stroke, inline, 4-cylinder Displacement: 4.8 litres (4800 cm³) Bore × stroke: 108 × 130 mm Compression ratio: 18:1 Fuel system: Common Rail injection (DCR) or mechanical Maximum power: 104–129 kW (140–173 HP) at 2200–2300 rpm Maximum torque: 565–670 Nm at 1600 rpm Idle speed: 650–900 rpm Fuel consumption (at full load): 208–218 g/kWh Weight (without accessories): approx. 500 kg Cooling: Liquid Direction of rotation: Counterclockwise (viewed from flywheel) The price given is NET and applies for export and business customers. Significant discounts are possible for individual buyers – We invite you to contact us directly by phone to secure your best price :)

Condition: new, Year of construction: 2026, CORMAK LUP16 Log Splitter – Professional 16-Ton Vertical Hydraulic Wood Splitter The CORMAK LUP16 is a professional vertical hydraulic log splitter designed for intensive use in farms, sawmills, and wood processing facilities. Thanks to its robust construction, high operating performance, and a hydraulic cylinder generating 16 tons of splitting force, the machine easily handles large-diameter logs. This reliable hydraulic wood splitter combines efficiency with precise operation, making it an excellent solution for continuous-duty applications. Main advantages of the machine 16-ton splitting force – efficiently splits hard, wet, and seasoned wood with large diameters. Vertical working design – optimised for heavy logs and provides ergonomic operation. Hydraulic system with overload protection valve – protects the pump and hydraulic system against excessive loads. High-performance gear pump – ensures consistent oil flow and reliable long-term operation. Adjustable splitting speed – allows precise adjustment depending on the type of wood (from 4.6 to 14.2 cm/s). Log lifting system – makes positioning heavy logs under the wedge easier and reduces physical effort. Design and technology The CORMAK LUP16 splitter is built on a robust steel frame with increased resistance to deformation, while all working components are designed for continuous operation. The angled splitting wedge improves penetration into the wood, reducing the splitting cycle time. The machine is powered by a three-phase 4.5 kW (400 V) electric motor, providing sufficient power for intensive splitting of thick and hard wood. Bledpfx Asuqiq Djfxol Precision and work efficiency The LUP16 model allows processing logs up to 1100 mm in length and 700 mm in diameter, making it a versatile solution for a wide range of applications. The 948 mm wedge stroke ensures complete splitting in a single cycle. The adjustable splitting speed range of 4.6–14.2 cm/s and return speed of 6.2 cm/s allow the operator to optimise performance for maximum productivity. Applications The CORMAK LUP16 electric log splitter is designed for: Firewood production companies Municipal services and forestry operations Agricultural farms Professional individual users Woodworking workshops and processing plants The machine is suitable for various types of wood, from softwood species to hard deciduous timber, including both fresh and seasoned logs. Standard equipment Hydraulic gear pump Log lifting system Angled splitting wedge Overload protection valve 5-pin industrial power connector Optional equipment Four-way splitting wedge for dividing logs into four pieces Technical specifications Parameter Value Splitting force 16 tons Minimum log diameter 80 mm Maximum log diameter 700 mm Minimum log length 350 mm Maximum log length 1100 mm Splitting speed (continuously adjustable) 4.6–14.2 cm/s Return speed 6.2 cm/s Wedge stroke length 948 mm Motor power 4.5 kW Voltage 400 V Hydraulic tank capacity 18 l Hydraulic system pressure 27.7 MPa Dimensions 1050 × 1550 × 2500 mm Weight approx. 259 kg

Condition: new, Year of construction: 2026, CORMAK LUP14 Vertical Log Splitter – Compact Professional Power with 14 Tons of Splitting Force for Intensive Work The CORMAK LUP14 log splitter is a powerful hydraulic wood splitter designed for professional applications such as forestry farms, firewood yards, and wood processing facilities. With a splitting force of 14 tons, the LUP14 model efficiently handles logs up to 1040 mm in length and 700 mm in diameter. It is a reliable work tool for companies involved in professional firewood production and processing. Main advantages of the machine 14-ton splitting force – enables efficient splitting of large and hard logs. Stable vertical construction – designed for working with large logs in an ergonomic position. Adjustable working speed (4.2–21.8 cm/s) – allows precise adjustment to the type of processed wood. Log lifting system – significantly simplifies handling heavy logs and reduces operator effort. Two-hand lever operation – minimizes accident risks and complies with high safety standards. Transport wheels – allow quick and convenient movement of the machine within the workplace or for transport. Construction and technology The CORMAK LUP14 electric wood splitter is built on a reinforced steel frame that ensures durability and resistance to deformation under high pressure. The working system consists of a hydraulic cylinder with an internal/external diameter of 80/90 mm and a reliable hydraulic pump that maintains stable operating pressure in all conditions. The machine is powered by a 400 V supply via a 14P5 industrial socket, while the drive is provided by a 3.5 kW electric motor. The robust hydraulic system guarantees smooth operation and long service life even during intensive use. Precision and work efficiency Thanks to its optimized hydraulic system and durable construction, the CORMAK LUP14 provides efficient and repeatable performance when processing firewood. The adjustable feed speed range from 4.2 cm/s to 21.8 cm/s allows the machine to be adapted to different working conditions – from hard hardwood species to fresh softwood. Applications The LUP14 vertical hydraulic wood splitter is designed for: agricultural and forestry farms, firewood processing yards, Blsdperidp Esfx Afxol municipal companies, wood processing plants, professional individual users. It efficiently handles logs with various dimensions, making it suitable both for seasonal firewood production and continuous professional operation. Standard equipment Hydraulic pump Transport wheels Log lifting system Two-hand control system 14P5 power socket Optional equipment Four-way splitting wedge Technical specifications Parameter Value Motor power 3.5 kW / 400 V Splitting force 14 tons Cylinder diameter (inner/outer) 80 / 90 mm Maximum log length 1040 mm Approximate log diameter range 100–700 mm Overall dimensions 1440 × 1350 × 2280 mm Weight 185 kg