Divided buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
4
Bending tool, die, upper blade, upper tool, walk tool Ps0cja Tool for bending machine -geteilt Tool 82 ° dimensions 170 x 60 mm -Gesamtlänge 2540 mm lengths 20/40/80/160/320/640/1280 mm Weight 88 kg more
5
Bending tool, die, upper blade, upper tool, walk tool Bnwa0nb Tool for bending machine -geteilt Tool 82 ° dimensions 145 x 43 mm -Gesamtlänge 2946 mm lengths 25/30/35/40/50/70/100/200/200/300 / 400 / 500 / 996 mm Weight 92 kg more
5
Bending tool, die, upper blade, upper tool, walk tool Tool for bending machine -geteilt Tool 88 ° dimensions 190 x 55 mm -Gesamtlänge 1126 mm lengths 338/338/450 mm Ckcsffys Weight 54 kg more
4
Bending tool, die, upper blade, upper tool, walk tool Tool for bending machine -geteilt Tool 88 ° dimensions 188 x 55 mm -Gesamtlänge 351 mm lengths 341/10 mm Weight 18,6 kg 2xch9hpio more
5
Bending tool, die, upper blade, upper tool, straight tool Tool for bending machine -geteilt Tool 60 ° dimensions of 203 x 45 mm -Gesamtlänge 1800 mm lengths 900/900 mm 2xcklq3iw Weight 82 kg more
5
Bending tool, die, upper blade, upper tool, walk tool Tool for bending machine -geteilt Tool 82 ° dimensions 190 x 45 mm Ps0faq -Gesamtlänge 800 mm lengths 45/50/55/60/90/500 mm Weight 28 kg more
5
Bending tool, die, upper blade, upper tool, walk tool I3dnrer Tool for bending machine -geteilt Tool 82 ° dimensions 190 x 45 mm -Gesamtlänge 1594 mm lengths 26/41/47/50/59/60/100/197/200/216 / 598 mm Weight 62 kg more
4
Bending tool, die, upper blade, upper tool, walk tool Tool for bending machine -geteilt Tool 82 ° dimensions 190 x 46 mm -Gesamtlänge 355 mm lengths 50/50/75/85/95 mm 2xckb9wuv Weight 62 kg more
5
Bending tool, die, upper blade, upper tool, walk tool Tool for bending machine -geteilt Tool 82 ° dimensions 190 x 45 mm -Gesamtlänge 2125 mm lengths 20/25/30/35/40/45/50/55/60/65 / 70 / 75 / 80 / 85 / 90 / 100 / 200 / 500 / 500 mm 2wvscgav3 Weight 84 kg more
4
Bending tool, die, upper blade, upper tool, walk tool Tool for bending machine -geteilt N8uc8zau Tool 82 ° dimensions 165 x 47 mm -Gesamtlänge 2900 mm lengths 200/300/400/500/500/1000 mm Weight 112 kg more


divided
daily

New machines via email!

Stay updated!
5
Bending tool, die, upper blade, upper tool, straight tool Tool for bending machine 3mkx8bwd0 -geteilt Tool 30° size 196 x 26 mm -Gesamtlänge 2997 mm lengths 1 x 390 / 4 x 500 / 1 x 607 mm Weight 102 kg more
5
Bending tool, die, upper blade, upper tool, straight tool for bending machine Delivery as is as seen Photos see tool damage -geteilt Tool 30° size 196 x 26 mm -Gesamtlänge 4158 mm lengths 1000/690/557/348/335/307/200/160/125/111 / 100 / 100 / 85 / 40 mm Weight 104 kg Bdhbvps2y more
3
Bending tool, die, upper blade, upper tool, walk tool Tool for bending machine Hpwlmeu -geteilt Tool tip 135° dimensions 94 x 26 mm -Gesamtlänge 200 mm lengths 20/40/50/90 mm Weight 2.4 kg more
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Gl0mqc2tq This includes the CORDES STAIR-ROUTER MODEL "40" Automatic CNC Stair Stringer Router and CORDES WEDGIT MODEL 30 Automatic CNC Stair Wedge Cutter. - Both are sold together for one [...] STAIR-ROUT "40" Fully Automatic 3-1/2 Axis CNC Stair Stringer Router for trenching open and box stairs. Unit automatically cuts rise, run, and advances to the next board. This model was developed over (4) Generations of improvements. Basic Operation: -- Operator... more
6
MACHINE DATA WEEKE BHX 500 DRILL DD-20 CNC Machining Centre Make : WEEKE Model : OPTIMA T BHX 500 Serial# : 0-250-17-1159 Year of Mfg. : 2007 Condition : Very Good only few working hours Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in the US till now! DESCRIPTION Feed thru CNC P & P Router Vertical and Horizontal Borer Top and Bottom Borer ... more
5
Spiral milling facility, head of part of, dividing head, rotary table, rotary table Recording inside SK40 Tip height 65 mm Vbw9pezl8 Top width 440 mm Gate ø mm Turn coupling for left & right spiral -Swiveling for helical spirals 0-45 ° Dimensions 760/430/H310 mm Weight 61 kg more
7
 Start Chat

Dividing head Zimmermann FZ TZ

Fröndenberg/Ruhr, GermanyGermany
6437 km
1987
good (used)
Used apparatus of part of Internal number: m2502 Manufacturer Zimmermann Bctfc0kvuj Type TZ and FZ Ma. Number 56 Built in 1987 Weight 280 kg Item location: 58730 Fröndenberg/Ruhr The machine can be visited like to see power and tried out. We will gladly send you more photos by E-Mail. A forklift/crane for loading is available. We reserve the right to a sale. There is the way learned to examine suburb for sale articles. Specific questions should be clarified in advance.... more
1
We offer for sale: Fzy7qg9 1 piece of used shelf floor divider to expand a compartment bottom shelf (plug-in system) Dimensions: approx. 490 (width) x 380 (height) mm The article is used and in good condition. more
6
centre height 100 mm 2gcqzbhqa chucking diameter 200 mm dividing each 1 indexing device - indexing number 360 weight of the machine ca. 0,085 t dimensions of the machine ca. m more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cpcyqfj CEDAR RAPIDS Portable Cold Material Feed Bin System with the following Components and Features: -- (4) 8' x 10' Feed Bins with Bin Dividers. -- 8'x 24” Belt Feeders with 5 HP DC Motors, -- 30"x 50' Collecting Belt Conveyor. -- Frame Fitted with (2) Axles (No Wheels or Tires). more
7

Box conveyor belt HIT FB

Geiselwind, GermanyGermany
6695 km
1995
excellent (used)
Very nice box conveyor for cut goods or sawdust. Completely closed box. Length 17,500 mm. belt width 500 mm. Bcslu7prc8 Drive with gear motor with power band. Role of pressure to shoot up. Divide into 2 for transport. Little worked. more
5
Round table, round table, dividing head, part head clamping surface ø 400 mm Groove mm Height 150 mm Dimensions 600/700/H150 mm V0nd8j Weight 147 kg more
6
chamfer lenght 480 - 4045 mm 4 pieces of unused upper tools: tool No 5 length: 3050 mm, dimensions see sketch, price = 710,- tool Nr 6 Length: 3073 mm, dimensions see sketch, price = 970,- S3glttgl tool No 9 L = 1925 mm divided, dimensions see sketch, price = 850,- tool Nr.10 length: 1520 mm, dimensions see sketch, price = 850,- Prices excl. VAT Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
1
We offer for sale: 1 bottom bracket to fit on cross-bars Bbvtk2qfk3 The brackets are versatile and with a screw to secure. The brackets are to divide: separate for doors, Windows, wooden, long goods etc. Dimensions: Height approx. 940 x depth approx. 700 mm Very good condition more
3
centre height 200 mm chucking diameter 160 mm dividing each 1 indexing device - indexing number 360 total power requirement kW weight of the machine ca. 0,10 t dimensions of the machine ca. m Qmbxwkfr7 four sided chuck 160mm, deviding area 360degree, deviding 1 degree. more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Bcc8huza2k EMME-ELLE LBA Automatic Polyester Buffer. Overall table size: 1.35 m x 6.7 m (56" x 264" ), dual stations for continuous automatic operation. -- 1,350 mm (53") Wide & 7 m (22') long fixed vacuum holddown table divided into (2) working stations, each work station with (2) work zones, (1) for work in process and (1) for loading/unloading. -- Machine works continuously while operators can remove or lay up panel components in one of the (2) work zo... more
9

CNC - 4th axis Hofmann NCT 160

ISERLOHN, GermanyGermany
6437 km
1994
excellent (used)
CNC 4th axis Bcricpd72s Fabr. Hofmann type: NCT 160 BJ. 1994 Tip height: 160 mm Spindle bore: 37 mm with tailstock 4 - jaw Chuck diameter 160 mm Röhm Siemens drive motor. in very good condition. more
4
Round table, round table, dividing head, part head clamping surface ø 310 mm height 130 mm Groove mm Vbw3zkgxv Dimensions 410/380/H130 mm Weight 40 kg more
2
table diameter 380 mm table height 118 mm mm weight ca. 75 kg Nbnht dimensions of the machine ca. 600 x 500 x 118 mm Index base with dividing-head plate Index plates ( diverse ) The table is fully functional and in good condition. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
1
We offer for sale: Fh3z0ot Bottom bracket to fit on cross-bars The brackets are versatile and with a screw to secure. The brackets are to divide: separate for doors, Windows, wooden, long goods etc. Dimensions: Height approx. 500 x depth approx. 450 mm Very good condition more
3
centre height mm taper bore SK 40 dia. of draw-in collets bis 25 mm Bnysm3gs dist. spindle-nose - arborbearing 250 mm swivelable +/- 90 Grad total power requirement kW weight of the machine ca. t dimensions of the machine ca. m This is a partial head 2112 for milling machines DECKEL. Largest distance of partial head spindle - counter top 250mm, distance between spindle center to Counterholder lower edge 100mm, pivotability of the partial head spindle round axis vertical to the table sli... more
1
Elect./Voltage: 400 V, 50 Cy, 3 Ph. Ewaqndh SUPERFICI ETC1-6-650 Multi-Level Flash Off Oven; Oven system provides and environment of laminar flow hot air movement for use in the flash off process for applied coating [...]: -- Multi level accumulator enables in-line flash-off utilizing minimal floor space. Six (6) guided trays with belts for charging and discharging. A speed variator that regulates the speed of the belt during the charge and dischare phases. -- A thermo-ventilation system d... more
5
Horizontal direct dividing FP1 originating from a cover.  Vnz2b800b Manufacturers probably Sandvik.  Three-jaw Chuck diameter 240 mm spindle passage approx 50 mm centre height approx. 255 mm  more
3
Round table, round table, dividing head, part head clamping surface ø 500 mm height 120 mm Groove mm Dimensions 660/680/H120 mm Weight 129 kg Brjzzcl8 more
4

Indexing Device WENIG HT 130

Bünde, GermanyGermany dealership location
6460 km
used
centre height 130 mm spindle bore 18 mm ratio 40:1 swivellable - 10° bis 90° ° groove width 16 / 18 mm weight 28 kg dimensions of the machine ca. 0,5 x 0,25 x 0,25 m H3z8oknj Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chu... more
5
Milling Machine Accessories: used dividing attachment MAX STEHLE, WEINGARTEN / WÜRTH Bcpsunjeai 3-jaw chuck diameter 350mm more
4
table diameter 380 mm table load 100 kg table height 110 mm Total height 110 mm no. of flutes 7 groove width 12 mm no. of flutes 7 groove width 12 mm flute distance 50 total power requirement kW weight of the machine ca. 0,05 t dimensions of the machine ca. m Gltkall Round table DECKEL 6017 dividing in circle and vernier, scale value 1 smalest vernier value 1° degree number of snaps at index dividing 24 (15°) worm drive ration 90:1 more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbxuhgabqt WEEKE VANTAGE 200/512 FLAT TABLE MACHINE (W/ATC/BORING,"C" AXIS): -- Specifications:5' x 12' Flat Table "Bridge Gantry" machine with User-Friendly "MATRIX" grooved phenolic vacuum table. -- Working Area:"X" Axis is 145.6" (3,700 mm), "Y" axis 61" (1,550 mm), "Z" axis stroke is 7.3" (185 mm), max. material thickness of 3.9" (100 mm). -- Positioning speed: "X" & "Y" axis 426 FPM (130 MPM), "Z" axis is 65 FPM (20 MPM); machine head travels on ... more
8

5 Axis CNC Machining Centre Maka PE70

Liverpool, United KingdomUnited Kingdom
5686 km
2007
good (used)
Working area in 3 axis - 5900mm x 1250mm x 300mm Working area in 5 axis - 5700mm x 1250mm x 300mm Travel speeds - x any axis 45m/min, z axis 24m/min 10kw Routing head water cooled, with infinitely variable speeds upto 24000rpm. 5 axis, for HSK Tools Horizontal 32 position toolchanger to accept HSK tools [ max weight of tool 4.5kg including tool holder.] 8 x Panel supports to accept various types of vacuum pods [ table divided in 2 clamping stations ] Vaccum pump 128m3 / hr with stand by ... more
2
Round table, round table, dividing head, part head, dividing head three-jaw Chuck ø 140 mm height 185 mm 8 pitches can be set to-max Hh9xei3p3 Hole Centre Ø 35 mm weight 30 kg more
6
bore capacity in steel (diameter) 50 mm arm length 2000 mm workpiece height max. 1485 mm bed length 13 m bore spindles - Morse Taper 5 spindle turning speed - 12 steps 30 - 2000 UpM feeds 8 / 0,08 - 0,7 mm/U column diameter 410 mm bore capacity in cast iron 70 mm total power requirement 4 kW weight of the machine ca. 5 + ca, 5 t dimensions of the machine ca. 13 x 1,3 x 3 m Condition: ready for operation Automatic clamping Thread cutting device Clamping plate 2 x 1500 x 2000 mm SLIDING ... more
4

35/5000 Rotary table Dividing unit Röhm

Ennepetal, GermanyGermany
6422 km
ready for operation (used)
Milling Machine Accessories: used dividing attachment Rludl9y 3-jaw chuck RÖHM diameter ca 190mm more
3
grinding diameter 12 mm grinding length 150 mm workpiece length 200 mm lip angle 0 - 180 ° relief angle 0 - 60 ° grinding wheel speeds 5000 U/min power capacity 0,25 kW weight of the machine ca. 0,03 t Yrkhr8 dimensions of the machine ca. 0,40 x 0,30 x 0,30 m K111 with engraving cutter (equipment01) Engraving cutters with profiles 1-15 made of HSS or carbide, small turning slicer or push chisel, as well as similar tools such as pointed drill, can be exactly grind or sharpen with this equipme... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbu9mgim27 MASTERWOOD PROJECT 415 CNC MACHINING CENTER (W/ATC) -- Specifications:Working field "X" axis 124.8" (3,170 mm), "Y" axis 51.1" (1,300 mm); "Z" axis stroke is 11.4" (290 mm), max material thickness is 4.3" (110 mm). -- Positioning Speed:"X" axis 246 FPM (75 MPM), "Y" axis 164 FPM (50 MPM), and "Z" axis 42 FPM (13 MPM) -- Work area:(6) Adjustable panel supports with LED read-outs for quick & easy Pod & Rail placement according to the program, ... more
56

C-Construct Staalconstructies

Amsterdam, NetherlandsNetherlands dealership location
6218 km
2010
ready for operation (used)
6.200 €
Offer
Another 6 days
demountable hall (multi-company building); dim. 80.00x15.00 mtr; divides into 4 sections of 20, 25, 15 and 20 meters respectively (1 wall partially disassembled); roof height approx. 550-450 cm; roof pitch 5 degrees; steel construction; vv insulated roof and wall panels; 4 "Alpha-Normatec" sectional doors; dim. approx. 375x425 cm; front and rear access doors; 230V and 400V power supply; indoor and outdoor lighting; water connection inside and outside; emergency lighting; security system; HWA wit... more
5
Round table, round table, dividing head, part head Clamping surface d = 400 mm Height 130 mm Weight 90 kg Qk2yb8bgo more
5

Machining Center - Vertical DECKEL DMC 635 V eco

Karlsbad, GermanyGermany dealership location
6611 km
2010
used
longitudinal:635 mm cross:510 mm vertical:460 mm rapid traverse:30 m/min table surface area:790 x 560 mm Number of noches:5 St. Distance of t-slots:100 mm groove width:14 mm :600 kg Tool Changer:20 fach max. tool length:250 mm max. tool diameter:80 mm max. tool-dia with free toolbox:130 mm power capacity at 100 % load:9 kW power capacity at 40 % load:13 kW turning speed range:20 - 9000 1/min tool taper:SK 40 control:Siemens 810 D / shopmill :20 kVA E8uhooz9a dimensions of the machine ca.:3,5 ... more
6
spindle taper 2 x 40 ISA forward bearing diameter 110 mm milling head speed 100 - 4500 U/min milling drive 5,1 kW workpiece length - max. 830 mm taper diameter 78 g6 mm centre height 260 mm turning speed range - stepless max. 15 U/min distance of spindles 135 mm spindle nose DIN 55026 Gr. 5 stroke of workpiece slide 810 mm Feed speed max. 6 m/min. surface area 200 x 1750 mm tool post (Z-axis) stroke of tool slide 120 mm Feed speed max. 2 m/min. column movement 200 mm tail stock ... more
5
3 Tegometallregale, height 2.45 m Ggkplgsp 1 x single-sided, approx. 4 m long (5 stand) 2 x double-sided, each approx. 2 m long (3 column) with baskets, divide material, hooks, bar code bar, etc., without goods (see photos) 5 key perforated sheets (approx. 400 x 1000 mm) and 1 tensioned sheet (approx. 300 x 1000 mm) vertically. Can be extended, clean, good condition more
1

FLAT TABLE MACHINE (W/ATC/BORING) WEEKE BHP 200

More Weeke Bhp 200
North Carolina, United StatesUnited States dealership location
518 km
2004
used
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Ncdkz WEEKE BHP 200 FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:6' x 12' Bridge Gantry" machine; Grooved "Matrix" phenolic table divided into (2) work zones. -- Working Area:'X" Axis 145.6" (3,700 mm), "Y" axis 74" (1,880 mm), "Z" axis stroke is 12.8" (325 mm), max. material thickness of 4" (100 mm). -- Positioning speed:"X" Axis is 165 FPM (50 MPM), "Y" axis 131 FPM (40 MPM), "Z" axis is 65 FPM (20 MPM); machine head travels on THK line... more


divided
daily

New machines via email!

Stay updated!

to

to

Edit search
DIVIDED
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close