Used Divided for sale (1,071)

Condition: used, centre height / mm weight 160 kg chucking diameter 250 mm Fodpfx Aleymga Nj Uepn swiveling dividing head with three-jaw chuck from Forkardt F250 Chuck diameter: 250 mm Total weight: 160 kg

Condition: used, centre height / mm total power requirement / kW weight of the machine ca. 450 kg Fpedpfx Aljy Sul Ee Uen

Condition: used, Year of construction: 2006, Overview  Fodpow T Sthefx Al Uspn This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  - Capacity: 30,000 bottles/h (0.33 L, 6-packs) - Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm - Formation of packs: 2×3 (six-pack wraparound) - Operating hours: 1,677 - Construction: Full stainless steel - Glue type: Hotmelt Scope of Delivery  - Wraparound packer | Krones | Solidpac | 2006 - Infeed conveyors for bottle supply and dividing system  

Condition: used, Year of construction: 2008, x-travel 1500 mm y-travel 800 mm Fpodpfx Asux Agvol Ujn z-travel 700 mm table surface area 1760 x 700 mm spindle taper SK 40 spindle turning speed - stepless 8000 U/min spindle drive 15 kW feeds 1 - 8000 mm/min rapid traverse X/Y/Z axis 15 / 15 / 12 m/min table load max. 2500 kg spindle throat 760 mm ATC 40 Pos control HEIDENHAIN, TNC 530 weight of the machine ca. 12,5 t dimensions of machine L x W x H 4,23 x 2,98 x 2,74 m - with coolant through spindle Accessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm; 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm; various tool holders, chip conveyor, coolant - geometrical overhauled in 2022 - - new ball bearing spindle installed on Y-axis in NOV. 2022 - - the magnetic plates shown on the photo are not included -

Condition: used, Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: 1,056 mm Number of bays per shelf row: 01 pcs. The scope of delivery includes: 02x shelf uprights, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkhead stays and base plates The uprights are pre-assembled 2,278 mm high 400 mm deep 08x Shelf, used Designation: ZB 4423 V Material color: sendzimir galvanized Dimensions: 994 x 400 x 30 mm Weight per unit: approx. 4.65 kg Max. load per shelf 200 kg with evenly distributed load 01x Drawer, used Description: ESCH 341010-V-Z Material color: sendzimir galvanized Dimensions: 994 x 400 x 100 mm Front panel height: 100 mm Useful depth: 337 mm 8 dividers STE4010, transverse 16 dividers QTE 1810, lengthwise Fpodpjttk N Dofx Al Uen incl. 2 pull-outs incl. 2 drawer side panels Weight per unit: approx. 11.10 kg Max. load per drawer 70 kg with evenly distributed load 16x dividers, used Material color: sendzimir galvanized Clear shelf height: 291 mm 02x side panel, second-hand Designation: SWI 3422 Material color: sendzimir galvanized Dimensions: 2,275 x 275 mm 01x Cross brace, second-hand Designation: KV31013 Material color: sendzimir galvanized Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: as good as new (ex-display), Year of construction: 2025, I - beam section - flat steel 80 x 20 (d 1200) mm I-beam section - upend 80 x 25 (d 2100) mm L-beam 50 x 50 x 6 (d 1000) mm bar material - diameter 40.0 (d 800) mm square material 60x60x3 ( d 4000 ) mm rectangle 80x30x3 ( d 6000 ) mm roll surface width 177x60 (18x5 Nut) mm bar material dia. max. 70 x 2.0 (d 1600) mm tool adaptor 60.0 mm turning speeds 6.4 m/min. oil volume 80.0 Liter Fedpfx Asxcuipel Uopn total power requirement 4.75 kW weight 1080 kg range L-W-H 940 x 1260 x 1390 mm Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x manually adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Condition: as good as new (ex-display), Year of construction: 2021, L-beam 40 x 5.0 (d 500) mm I - beam section - flat steel 80 x 15 (d 700) mm I-beam section - upend 50 x 10 (d 800) mm round material 30.0 (d 700) mm bar material dia. max. 60 x 2 (d 1200) mm square material 50 x 30 x 3 mm range L-W-H 670 x 530 x 1350 mm weight 185 kg total power requirement 0.75 kW Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine Fedpfx Ajxcui Nel Uspn - horizontal and vertical work possible * Machine head can be folded 90° - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - Operating instructions in German

Condition: excellent (used), Year of construction: 2018, I - beam section - flat steel 120 x 15 (d 750) mm I-beam section - upend 60 x 10 (d 800) mm L-beam 50 x 5 (d 1200) mm round material 35.0 (d 800) mm bar material dia. max. 70 x 2 (d 1200) mm square material 50 x 40 x 3 mm bending speed 4.3 m/min roll diam. toproll 155 mm bore 50,0 mm total power requirement 1.5 kW weight 320 kg range L-W-H 730 x 830 x 1350 mm Exhibition machine from 2023 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - operating instructions in German Fpsdpfx Aljzyvbnj Uon

Condition: ready for operation (used), Year of construction: 2016, pressure 20.0 t chamfer lenght 850 mm distance between columns 850 mm back stop - adjustable 375 + 400 mm stroke of upper beam 196 mm dayligth 470 mm ajustment speed 200 mm/sec table height ca. 900 mm total power requirement 5.0 kW weight of the machine ca. 2500 kg New price ~ 85.000 euros well-kept / very good condition (!!) with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil - in checked condition - machine video - ?v=foxzKIA7vX8 Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided tools are possible an almost unlimited variety of areas of application. Furnishing : - Stable machine frame for standing and seated operation - Deformation-optimized press beam - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws) - CNC control Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes : Y + X + R + Z1 + Z2 - CNC control unit in front right, swivelling - Inductive length measuring system with temperature compensation - Ergonomic machine design - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) - front safety device (DUAL Laser/Iris Rapid Bend) - Rear security cover - Laterally pivoting protective doors - 2x foot switch, for standing and sitting operation - Support tables comfort (front) Fpodpfx Alsxacifj Usn - User manual (original) * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * Speed X axis .. 250 mm/sec * Speed R axis .. 600 mm/sec * Z axis speed .. 1100 mm/sec * Positioning accuracy X axis .. 0.04 mm * Positioning accuracy R axis .. 0.06 mm * Travel X axis .. 375 + 400 mm * Travel R axis .. 180.0 mm

Condition: good (used), Year of construction: 2008, total length: 2,000 mm, total width: 1,600 mm, total height: 1,900 mm, overall weight: 800 kg, For Sale: Tromp Guillotine / Dough Divider For dividing/cutting dough pieces. This guillotine is suitable for croissants, ciabatta, etc., and can be used for all types of divided products. It can also be integrated into a lamination line. - Brand: Tromp - Type: Guillotine / Dough Divider - Blade is easy to replace - Servo-controlled Fpedpfx Aezvdbnel Usn - Controller type: Lenze - Blade width: 780 mm Overall dimensions: 2000 mm x 1600 mm x 1900 mm It is possible to view this machine on-site. If you have any questions or comments, please do not hesitate to ask. Sincerely, Leo Holland

Condition: used, each with 24 stations with divider plate suitable for 48 blocks : - dimensions 1 full block per station -> ± 1.056 mm x 530 mm - dimensions 2 blocks per station -> ± 528 mm x 530 mm max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 3.319 x 1.600 x 1.120 mm Fodpfx Alezxrmds Uspn 24 blocks weighing ± 26 kg or 48 blocks weighing ± 13 kg ± 1.248 kg / Cycle (2h30)

Condition: used, mileage: 659,000 km, power: 355 kW (482.67 HP), first registration: 01/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, parking heater, soot filter, DAF XF480 FT SSC Standard Tractor Unit ----Nutzfahrzeuge Göppl GmbH - Authorized DAF Dealer ---- First registered: January 20, 2020 - Production November 2019 Equipment: Super Space Cab * Exterior sun visor, green translucent * Skylights * Mechanical cab suspension * Fixed roof spoiler * Side fenders * Argenta cab interior design * Driver's seat: Luxury Air * Passenger seat: Basic * Upper bunk * Lower bunk with drawer * Refrigerator * Curtains with divider * Air conditioning * Auxiliary heating * Auxiliary air conditioning * Radio/CD player * Adaptive cruise control with FCW and AEBS * MX-13 engine, 355 kW/483 hp, EURO6d * 12-speed TraXon transmission * MX engine brake * Rear axle ratio 2.21 * Suspension: * - Front: 8.0t parabolic suspension * - Rear: 13.0t air suspension * Tires: * - Front: 385/65R22.5 * - Rear: 315/70R22.5 * Wheelbase: 3.80m * Battery box and spare tire holder on the right * Aluminum fuel tank: 845 liters * AdBlue tank: 90 liters * Wiring harness for transmission auxiliary drive * Dust shield Optional: * New Service X+Y * OBU installation Fjdpewcicgjfx Al Uspn * Odometer test * Odometer conversion to G2V2 * Seat covers * New mattresses Viewing and test drive available at the Weiden location by appointment. ----Nutzfahrzeuge Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg DAF Authorized Dealer - DAF Service Partner - FIAT Professional Service Partner Subject to errors and prior sale Sale to businesses only

Condition: good (used), Heidelberg Stahlfolder KH66-6KTL +SKPD 66 + gluer Machine in perfect condition, ready to work. RFH-66 continuous feed BCUH-66 folding module Year of production 2005 6 cassettes 2 electronic knives side cassette with 1 knife SKP.D 66 press auxiliary roller for perforation Fsdpfx Alozlgddo Ujpn First rollers divided for gluing Gluing machine with pneumatic nozzles Max format: 660x1200mm two LCD control panels Counter with packaging, speed control, etc. Feeding on a suction roller Soundproofing covers. Window cassette. Documentation, additional tools and equipment.

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation Fodjzuwyzepfx Al Uopn B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, Year of construction: 2021, CNC machining center with a fixed worktable, double-sided driven gantry, and a 5-axis milling spindle with continuous interpolation. Machine for processing solid wood, wood-based materials, and various plastics. Base machine and gantry Machine base and gantry made of a ribbed, welded steel construction, offering very high rigidity. Guidance system and drives Gantry movement of the X and Y axes with rack and pinion and servo drive. DUAL GANTRY MOTORIZATION: Drive of the X-axis with two synchronized servo drive motors. Movement of the Z-axis via ball screw with servo drive. Dust-protected linear guide. Safety system Three-part safety floor mats allow for the placement of workpieces in the non-active area. Moving partial enclosure with a Lexan protective window for the machining units. Central lubrication Automatic central lubrication Vacuum system Vacuum system for pendulum machining with constant suction power in both work areas. Machine operation The machine is equipped with a cable-guided remote control for performing basic functions. Electrical equipment Dust-protected control cabinet (CE) according to IP 55 standard, including an air conditioning unit and a mobile control panel. Machine control OSAI Open Numerical Control 5-axis swivel head Z 700 Movement of the C-axis and B-axis via brushless servo drives - Maximum rotational speed: 750 /2 sec. - Rotation C-axis: Swivel axis: +/- 110 Technical data - max. travel speed X-axis: 60 m/min - max. travel speed Y-axis: 60 m/min - max. travel speed Z-axis: 24 m/min - Vector speed: 80 m/min - max. workpiece height: 500 mm - Machining area: 4210 x 1605 mm (Extended working area) - Compressed air supply: 7 bar - Suction power: min. 2200 m3/h - Suction speed: min. 28 m/s - Suction nozzle: 160 mm Work table Comec Designed Phenolic resin table, designed as a grid table, grid dimension 50 x 50 mm, for accommodating Cosmec suction systems and templates. The work table is divided into two work areas. Threaded holes in the table to mechanically fix workpieces, 3 pcs. retractable stops Vacuum pump Vacuum pump 250/300 m3/h (50/60 Hz), power: 5.5 kW Fpsdpszux H Asfx Al Uen Main spindle 5-axis spindle: 18 kW main spindle, liquid cooling, tool interface HSK 63 F - 15 kW in S1 operation - 18 kW in S6 operation - Ceramic bearings - Direction of rotation: left/right - Spindle speed: 500 - 24000 rpm Extraction hood Extraction hood controlled via NC program, adjustable in height. 2 x Tool changer Moving 12-position tool changer for tool interface HSK 63 F - max. tool diameter 150 mm, if adjacent position is free - max. tool diameter 120 mm, if adjacent position is occupied - max. tool weight: 6 kg - max. weight of tool and holder: 40 kg Tool length measurement Station for automatic length measurement of the tool Note: Current status of the 5-axis simultaneous machining software through a maintenance contract.

Condition: used, functionality: fully functional, mileage: 210,287 km, power: 368 kW (500.34 HP), first registration: 01/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with sun sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.1 tonne Retarder: YES ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: YES Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 99 litre under/behind cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System Fpedpsz Aglpofx Al Uon GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Cab side air deflector - long tractor Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Basic finish - Satin badges, Grey grille, instep, bumper & spoiler, mirror housing and sun visor Tyres Information Front left - 8 mm Front right - 7 mm Rear left inner - 7 mm Rear left outer - 7 mm Rear right inner - 7 mm Rear right outer - 7 mm

Condition: used, functionality: fully functional, mileage: 209,414 km, power: 368 kW (500.34 HP), first registration: 05/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,809 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Battery 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI SCR, EGR and particulate filter Rear view camera: Without Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with sun sensor Driver attention support: NO Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver-side Technical specifications Fpjdpfx Asz Agl Aol Usn Wheelbase: 3800 mm Fifth wheel height: 160mm leg-height Front axle load: 7.5 tonne Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Full air cab: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with AEBS advanced emergency brake system Fuel tanks capacity (left, right): 450L fuel tank - right hand side, 650 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 90 litre for 710mm diameter fuel tanks Additional roof lights: Without Tyres Front tyre 385/65R22.5, Drive axle tyre 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: NO Headlights: Halogen H7 Roof lights: without Side Skirts: Without Deflectors: Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Basic finish - Satin badges, Grey grille, instep, bumper & spoiler, mirror housing and sun visor Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, mileage: 51,000 km, power: 174 kW (236.57 HP), first registration: 11/2024, fuel type: diesel, next inspection (TÜV): 11/2027, color: silver, gearing type: automatic, number of seats: 6, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, Optional equipment: Active seat ventilation for passenger seat, Active seat ventilation for driver's seat, AMG Line, Floor mats for driver's cabin: AMG velour, Trailer load 2500 kg, Roof liner/headliner Dinamica black, Entry lighting with logo projection function, Energizing comfort control, Driving Assistance Package, Driving Assistance System: Trailer maneuvering assistant (Trailer Assist), Driving Assistance System: Live Traffic Information, Chassis damping system Agility Control, Interior trim: Decorative elements in carbon fiber look, Load compartment divider, Light alloy wheels 8x19 (AMG, 5 double spokes, black), Metallic paint, Multimedia system MBUX High (touchscreen 12.3"), Night Package, Exterior mirrors painted black, Electric panoramic sliding sunroof in front, with panoramic sunroof in the rear, Spare wheel with jack, Service system: MBUX Augmented Reality for navigation, Seat equipment: Table between 1st and 2nd row of rear seats, Seats in the load/passenger compartment: 2nd row, 3-seater bench comfort, Sports pedals made of brushed aluminum, Reinforced front axle, Permissible gross weight 3.20 t, Auxiliary heater (hot water) Fpsdpfxoz Dlxbj Al Uon 3rd brake light, Storage net on the back of the rear seats, Adaptive brake light, Airbag passenger side, Airbag driver side, Ambient lighting (64 colors) cockpit and rear / complete, Dashboard upper part in imitation leather, Exterior mirrors electrically adjustable and heated, both, Exterior mirrors with integrated turn signal, Outside temperature display, Lighting in the grab handle in the rear with reading spot, BlueEfficiency package, Floor covering: Carpet in the driver's area, Floor covering: Carpet in the load/passenger compartment, Brake caliper with lettering (Mercedes-Benz), DAB tuner (digital radio reception), Roof edge spoiler AMG, Design package interior, Easy-Pack package, Sliding door left electric, Sliding door right electric, Automatic activation for headlights, Rear entry handle, Door sills with Mercedes-Benz lettering (illuminated), Entry lights, Exclusive, Driving Assistance System: Breakdown management, Window in the load/passenger compartment: - fixed, rear, Window in the load/passenger compartment: - fixed, front left, Window in the load/passenger compartment: - fixed, front right, Parking brake electric, Sliding door lock (active), Footwell lighting in front, Generator 250 A, Cup holder in the rear, Grab handles in the rear, Glove compartment lockable, Rear tailgate with automatic opening and closing system, Rear window can be opened, Induction charging cradle for smartphone (Wireless Charging), Interior mirror, digital (camera system, can be switched off), Body/structure: Bus, Child lock, Child seat recognition in the passenger seat (automatic), Folding table and decorative element (illuminated) on the backrest of driver and passenger seat, Climate control in the rear (Tempmatik), Instrument cluster with variable display (Widescreen Cockpit), Comfort climate control Thermotronik, Communication module Mercedes me connect (Internet-based services), Head airbag system (window bag), Head airbag system (window bag) in the rear, Fuel tank with misfueling prevention, Fuel tank: 70 liters, Radiator grille with LED light band, Cargo lashing points / tie-down rings, Steering wheel (steering column mech. adjustable), Heated steering wheel, Steering wheel with multifunction, Headlamp range adjustment, Mercedes-Benz emergency call system, Center console in front with roller blind / storag

Condition: excellent (used), Year of construction: 2006, 513 USED KEMPER MINI QUADRO ROUND bun divider-rounder. Line for rolls, ciabatta, and bread. Production: - square and elongated buns - round buns - stamping/marking - 4 rounding drums - moistening station - seeding station TECHNICAL DATA: Fpedpfx Aozugm Dsl Usn - year of production: 2006 The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, first registration: 05/2026, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,641 mm, loading space volume: 91 m³, total length: 14,000 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor * Kingpin load (national, t): 12 * Axle load (national, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Chassis neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option 1st axle: lift axle with traction aid * Activation of traction aid via button in truck (button installation not included) and by pressing the brake pedal three times * Option 3rd axle: with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via Smartboard and lift/lower valve * Pneumatic coupling head: European palm coupling * Operating console: EBS operation on the left in the direction of travel, mounted behind axles * Standard Smartboard * Central air and electrical console with gallows * Landing gears: Weweler * As steel gear-type landing legs, Weweler model, with compensating feet, single-sided operation and 2 speed levels * Landing leg crank handle position: outside * Tyre size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Rims: steel * TPMS sensor type: rim-mounted sensor * Wheel nut caps: black - PVC with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 pcs LED reversing lights, rear left and right in direction of travel, mounted on lamp bracket * Working light position (operated by switch): 2 pcs LED reversing lights at the front, left and right in the direction of travel, mounted near the landing gears * Lighting unit protection: one-piece mudguard * LEDs in rear door crossmember: 2 x 3-function LED * Operation underrun guard: Fixed underrun bar * Splash guards for underrun guard: black with STAS logo * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 3/4 * Hydraulic coupling - gender: Female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female * Hydraulic coupling hose: 3,000 mm * Hydraulic coupling position: connection option at front wall (additional connection option at landing leg) * Hydraulic positioning: pressure left, return right (CON) * Number of splash guards at mudguard: 2 pcs * Toolbox * Air connection: side-mounted on control panel * Aluminium ladder 3.80 m - right side in direction of travel * Broom and shovel holder * Two plastic wheel chocks * Bulkhead profile: 3 mm - 2 mm * Side wall profile: 3 mm - 2 mm * Moving floor system manufacturer: Cargo Floor * Floor system operation: radio remote control * Cargo Floor control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Bulkhead angle (°): 90 * Rear wall angle (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Clean-out wall: aluminium Fpsdpey Dmu Nefx Al Uon * Clean-out wall mounting: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: double-wing doors, divided 1/2 to 1/2, with crossmember at door end

Condition: excellent (used), mileage: 536,550 km, power: 213 kW (289.60 HP), first registration: 01/2016, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,770 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2016, Equipment: differential lock, tail-lift, Refrigerated/Freezer Truck MAN TGM 18.290 First registered: January 2016 Mileage: 536,550 km Automatic transmission, 12 gears Emission class: 6 Carrier Supra 125 OMZ refrigeration unit Loading space divided into 3 compartments with sliding wall Length: 7.9 m Widths: 75 cm, 82 cm, 82 cm Height: 2.15 m Payload: 7,370 kg Total weight: 18,000 kg Palfinger MBB tail lift, 2000 kg Brake pad wear, first axle: 84–85% Brake pad wear, second axle: 82–82% Tires, first axle: +/- 80% Tires, second axle: NEW! Automatic climate control Onboard computer Central locking Cruise control Differential lock Electric windows and exterior mirrors Air suspension front and rear Heated seats ... Address: Cevoman bv. Fpsdpjzl Tptofx Al Uon Lenskensdijk 5 2200 Herentals Belgium

Condition: like new (used), Year of construction: 2025, functionality: fully functional, STC-Ref: G-791-0243 Fsdjz Eyvwopfx Al Uepn Rhin-O-Tuff Onyx 7700 + ,Year: 2025 format: 0 x 356 mm equipped with: - punching tool Ovalloch/oval hole, Teilung/divided 4:1 - Delivery Rhin-O-Tuff APES 14-77 - Triggering of the stop APES 14-77 Paper Stop switch - die cutting thickness 3,5 mm, 35 Blatt/pages - Output max.80 strokes/hr. --> available: 11/2026

Condition: new, mileage: 10 km, power: 125.03 kW (169.99 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, color: white, gearing type: mechanical, suspension: air, number of seats: 3, Year of construction: 2026, Equipment: ABS, Android Auto, Apple CarPlay, EBS, air conditioning, airbag, blind spot assist, cruise control, electronic stability program (ESP), navigation system, parking heater, power assisted steering, traction control, Renault Master chassis L3, front-wheel drive 2.0 170 hp + transmission, 2 sliding tarpaulins, sunroof, sleeper cab. VEHICLE EQUIPMENT ➢ Installation option: connection on the B-pillar ➢ Tire pressure monitoring system ➢ Rain and dusk sensor ➢ Steel engine underbody protection ➢ Interior mirror "Wide View" ➢ Full-size spare wheel ➢ Standard tires ➢ Lane keeping assist ➢ Approval criterion EMRD3 ➢ LED low beam and daytime running lights ➢ RCall system ➢ Rear parking sensors ➢ Driver fatigue warning ➢ Traffic sign recognition ➢ Emergency brake assist ➢ Driver airbag ➢ Side marker lights ➢ Central locking ➢ ABS ➢ Cruise control with speed limiter ➢ Wireless charger for smartphones ➢ 10-inch multimedia system "OpenR Link" with wireless smartphone mirroring ➢ Manually adjustable air conditioning ➢ Electrically adjustable, heated and manually foldable exterior mirrors ➢ Height adjustment of the seat belt ➢ Folding key ➢ Plastic steering wheel, adjustable in two levels ➢ Central rear-view mirror ➢ Electrically operated front windows, in particular with pulse function ➢ Driver's seat with armrest and lumbar support ➢ 2-seater bench seat "mobile office" with storage compartment ➢ Cabin lighting ➢ 12 V socket in the cabin ➢ Pull-out passenger storage compartment ➢ Paneling of the partition to the cabin side with carpeting ➢ Lockable storage compartment in the dashboard ➢ Analog driver displays with a 3.5-inch TFT display (monochrome) ENGINE ➢ Engine type: Blue dCi 170 ➢ Displacement (cm³): 1998 ➢ Number of cylinders: 4 ➢ Number of valves: 16 ➢ Maximum power kW (hp): 125 (170) ➢ Maximum torque Nm: 380 – 1500 ➢ Fuel type: Diesel ➢ Emission standard: EURO VIe Equipment of the cargo area: • Sleeper cab Partner PREMIUM CAB, color WHITE • Webasto auxiliary heater 2 kW with heat distribution in the driver's cab and the sleeper cab. • Curtains for the front window in the driver's cab • Tool box 30 l. • Underrun protection. • Water tank. • Aluminum subframe. • Aluminum support frame for the tarpaulin. • Lateral supports of the support frame made of aluminum profiles • Roof supports made of aluminum tubes, embedded in rubber mountings. Fpsdpfx Alez Ezlmo Uon • Divided aluminum side walls with a height of 400 mm, construction with removable center posts. • Tarpaulin with customs closure, in black • Floor made of non-slip plywood, laminated on both sides, with mesh embossing on one side. • 10 brackets embedded in the edge of the superstructure for load securing. • The driver's cab is secured by a protective bar made of aluminum profiles. • The wheel arches are made of plastic and are equipped with mud flaps. • Bilateral side tarpaulins with tensioning device, tarpaulin with buckle closure • Sunroof system • Second battery • Air cushion with compressor • Lifting roof with lever – 300 mm • Superstructure with outline lights, mounted in accordance with current traffic regulations Delivery within two weeks after receipt of payment.

Condition: excellent (used), functionality: fully functional, power: 41.92 kW (57.00 HP), first registration: 10/2021, fuel type: diesel, color: orange, fuel: diesel, operating hours: 562 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, trailer coupling, HOLDER C 55 SC - Low-emission diesel engine, - Engine compliant with emission stage 5 / Tier 4 final - 4 cylinders - Power output 42 kW (57 hp) - Single-operator comfort cab with heating - Air conditioning - Tires: turf tires + winter tires + fenders, upon request - SDS driving comfort - Driver's seat with air suspension, backrest extension and lap belt - Wheelbase 1,820 mm instead of 1,700 mm as in C270, resulting in a vehicle 120 mm longer - 2 additional work lights at the front - Hydraulic Set 2 (3 double-acting control valves, 2 with floating position, 6 front quick-release couplings 2 rear quick-release couplings, connected via a T-piece with a front quick-release coupling, active hydraulic tilt adjustment, 1 multi-function joystick for 5 double-acting functions, including direction switch and speed control) - Hydraulic Set Flow Divider 1 (Flow divider for circuit 1, adjustable from 0-35 l/min with hose set Fodpezd D R Eefx Al Uspn to the front and rear, return line at the front and rear) - Hydraulic tilting system for superstructure frame - Heated exterior mirrors - Central lubrication system - Reinforced axle load distribution - LED rotating beacon - Front linkage, category 1, with hydraulic tilt adjustment - Hydraulic tilting system for cab - Locking bar - Hydraulic implement adjustment pump with 0-80 l/min - Mechanical front PTO shaft, 1,000 rpm - Work lights at the rear - Electrical socket, 7-pin, at the front - Electro-hydraulic implement relief - High roof - Color: Holder Orange RAL 2004 - Hydraulic oil level warning system - Reinforced axle load distribution The Kugelmann salt spreader and the front sweeper are not included in the offer and can be purchased separately if required. Subject to changes, typographical errors, and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: used, functionality: fully functional, mileage: 209,291 km, power: 368 kW (500.34 HP), first registration: 01/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with sun sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.1 tonne Retarder: YES ACC - Adaptive cruise control: YES Fpjdpfx Aljz Aglve Uen I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: YES Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 99 litre under/behind cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Cab side air deflector - long tractor Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Basic finish - Satin badges, Grey grille, instep, bumper & spoiler, mirror housing and sun visor Tyres Information Front left - 12 mm Front right - 12 mm Rear left inner - 10 mm Rear left outer - 9 mm Rear right inner - 9 mm Rear right outer - 11 mm