Index rotary table with Hirth serration
Year of manufacture: 2011
faceplate diameter : 300 mm
Table type : Hirth gearing
spindle bore diameter : 60 H7 mm
Center height : 170 mm
Clamping system : Hydraulic
Clamping torque : 2155 Nm
newicht : 150 mm
max. workpiece weight vertical : 150 kg
max. workpiece weight horizontal : 300 kg
The NIKKEN rotary table is designed for Siemens machines.
centre height 130 mm
spindle bore 18 mm
swivellable - 10° bis 90° °
groove width 16 / 18 mm
weight 28 kg
dimensions of the machine ca. 0,5 x 0,25 x 0,25 m
Unused semi-universal dividing set:
- Spindle in precision tapered roller bearings
- Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground
- Translation disengageable for direct sharing
- each division 2 to 50 and many divisions to 380
Tailstock, 2 part washers, centering point, driver and chuck flange
Tailstock, counter bearing for dividing head, dividing attachment
-Tip height: 135 mm
-Drawing with the photos
-Dimensions: 220/120/H140 mm
-Weight: 11.4 kg
table diameter 320 mm
table load 300 kg
table height 120 mm
chucking diameter 250 mm
weight of the machine ca. 100 kg
dimensions of the machine ca. 600 X 350 X 300 mm
- S/N: 224
- RÖHM three-jaw chuck
As good as new, only test used Lehmann EA510.L with Mavilor BLS 072 ERN motor. Axis has not yet made a chip, clamped counter bearing, 500 base plate, mounting set for bridge, 240mm faceplate, maintenance unit, wiring harness and Heidenhain single-axis inverter.
- center height 150mm
- Clamping torque 800Nm
- max. 80 min-1
- 2m indoor cable set with wall bushing and Harting components
- further technical data on request
We would also be pleased to carry out the commissi...
Rotary table Nikken CNC 180 27-06-000
Delivery time: immediately
Year of construction: approx. 2009
L x W x H: approx. 300 x 400 x 300 mm
Weight: approx. 120 kg
Very good general condition
4th axis rotary table
Face plate diameter: approx. 180 mm
Clamping T-slots: 4 pieces a 12 mm
Indexing: approx. 0.002 degrees
Max. Table load:
Vertical: approx. 50 kg
Horizontal: approx. 100 kg
Further accessories on request
Compact and rigid rotary table with D600mm plate
Working position - Horizontal&Vertical
Center height 335mm
Meain bearing approx. D350mm
Transmission by dual lead worm&gear
Hydraulic clamping system
Available optionally direct encoder RON2380 and servo motor QSY155DEcoDyn.
Spiral milling device, dividing head, dividing attachment, rotary table, rotary table
-Admission inside: SK40
-Tip height: 65 mm
-Distance between centers: 440 mm
-Passage: Ø mm
-Reversing coupling for: left u. Right spiral
-Pivotable for conical spirals: 0 - 45 °
-Dimensions: 760/430/H310 mm
-Weight: 61 kg
High load capacity rotary table with 2000x2000mm plate.
Centered load capacity 15Tn and transmission by dual-lead worm gear in combination with planetary reducer.
Main bearing approx. D1100mm.
Hydraulic clamping system.
Optionally available with Heidenhain RCN2580 encoder and Heidenhain QSY190DEcodyn motor.
Compact precision CNC rotary table, suitable for single part or small series production in precision mechanics. A horizontal or vertical assembly is possible. You can not buy a better quality!
- Made in Germany -
It is suitable as 4th axis on engraving and milling machines for engraving, lasering, drilling, grooving, milling or for use on a tool or surface grinding machine. Square, hexagonal, gear milling of any pitch or 3D machining are possible.
Precision worm gearing with a reduction ratio of...
Rotatable and tiltable dividing head make VEB Mikromat Dresden type MKT 300 S
Year of manufacture 1976
Diameter of the table surface 300 mm
8 T-slots radial 10 mm
Rotation angle range 360
Reading possibility 1° / 5"
Swivel angle range 90°
Permissible load 30kP
Height of the table when horizontal
standing table top 250 mm
Outer dimensions approx. 540 x 550 mm
Height 240 mm
used, in good condition
NC rotary table with 800x800mm plate
Working position - Vertical axis (horizontal plate)
Transmission by worm&gear i:180
Hydraulic clamping system
Prepeared (not included) direct encoder and servo motor
little used, very well preserved, in design with graduation and indirect division by means of a dividing plate.
Table size diam. 500 mm
Overall height 150 mm
Length 710 mm
Width (without drive section) 590 mm
T-slot width 16 mm
Transmission ratio 1 : 120
Weight 180 kg
Accessories: graduated disk, operating instructions.
Rotary table, rotary indexing table, dividing head, dividing head
-Handover: in the current state as viewed
-Locking: locking pin damaged, see photo
-Tip height: 150 mm
-Dimensions: 300/380 / H240 mm
-Weight: 37 kg
High rigidity and precision rotary table with 800x800mm plate.
Center height 600mm.
Transmission by dual lead worm&gear and hydraulic clamping.
Main bearing combined roller bearing D460mm.
Direct encoder RON285C and Heidenhain QSY155DEcoDyn.
Images might not fit with available rotary table.
Rotary Table with face plate D600mm and center height 335mm.
In perfect conditions, without usage by customer.
Included elements; Heidenhain encoder RON285C, Siemens motor 1K7086 motor and manual tailstock.
Worm & gear with reduction i:180
Hydraulic clamping system with 80Bar
Work load capacity 1500Kg (vertical axis) and 750Kg (horizontal w/o tailstock)
for direct graduation via ratchet disc and burr graduation.
Centre height with vertical position 125 mm
Height with horizontal position 152 mm
Direct graduation by means of ratchet disc, graduation 24
Swivel range 90°
Space required for vertical position 300 x 320 x 280 mm high
Weight approx. 45 kg
Accessories: three-jaw chuck WALTER, 200 mm diam.
Table can be mounted on any Haas milling machine with option 4th/5th axis.
Or other machines as well. However, the connection of motors must be checked and the cable must be replaced. Optimal would be a HAAS VF3 to VF6
Optionally a Haas VF2 SS BJ 2014 could be sold as a complete package
2 axis CNC rotary table.
Oscillating circuit 400 mm, face plate 320 mm. High quality duplex gear teeth.
Also available as direct drive. See picture 2. price for this 27.990
including Renishaw encoder.
Technical data URH 320 i DT
Faceplate diameter (mm) 320
Load capacity (kg)
Horizontal 110 Vertical 70
Accuracy of swivel axis ±30".
Accuracy of rotary axis ±15".
Repeat accuracy 4".
2 years warranty.
2-axis rotary tables from
8.900,--€ ( 150 mm face plate )
10.900,--€ (200 mm face plate)
- Fa. lid
- vmtl. SK40 / mounting diameter approx. 30mm
- Sales volume 1 pc.
- optical condition according to photos
Shipping on request. We ship daily with DHL, general cargo (with loading board) and forwarding agent.
All information about your purchase can be found during our business hours from Mon.-Thu. from 07:30 to 16:30 and Fri. from 07:30 to 14:00.
Notes on how to buy our items:
We would like to point out that we are not a specialist retailer for t...
Universal dividing head
for direct, indirect and differential division
for milling spiral grooves, due to drive option via machine table spindle
Phosphor bronze worm wheel, worm Cr-Ni steel, hardened and ground
pivotable from 10° under horizontal to vertical (-10° to 90°)
each pitch 2 to 50 and many pitches up to 380
Transmission ratio 40:1, adjustable
Transmission can be disengaged for direct splitting
Concentricity accuracy : 0,015 mm
Dividing accuracy 1 min.