Tool holder for sale
Identified location: Ashburn (US) (Edit)
tool clamping area:diverse mm
97vnfsru3
weight:0,1 t
appr. 45 ISO 40 arbors, package or single sale more
length 65,5 mm
diameter 37 mm
thread M24
Pull stud with bore for internal cooling
Bei7n2nx
ISO 7388/2-B (MAS 403-1982) more
used
Tapping chucks tapping Chuck, screw Chuck
Delivery as is as seen
Tapping Chuck without collets
-with slip clutch
Cutting performance M24-M64
Recording MK5
-2 x thread cutting feed available
Award pieces
Weight 13 kg
Wadb0 more
8-station SAUTER turret-disk (unused)
Id.-Nr. 081 075
Diameter 260 mm
Tool taper bore 30 mm
Bm7sd9lvvq more
radial tool holder, with internal cooling BMT 65 for DOOSAN; Hyundai Wia +++
Axial design (straight holder)
Manufacturer: RGX- Tools
Artikelnummer: RGX2-65/101-32/2(DO)
Tool holder: Collet ER 32
Internal cooling : yes ; 20 bar
Directly from stock, also possible for testing in advance
Compatible with the following machines
Chevalier ᐳ FBL-300
DOOSAN ᐳ PUMA 2100/2600 M/LM/MS/LMS
DOOSAN ᐳ PUMA 2100/2600 Y/LY/SY/LSY
DOOSAN ᐳ PUMA 3100 M/LM/LY/XLM/XLY/ULM/ULY
DOOSAN ᐳ PUMA MX 2000/2500
DOOSAN ᐳ PUMA ... more
tool clamping area:ISO 50 mm
weight:0,4 t
single or package available.
- appr. 75 tool arbors ISO 50 with partly tooling
Epim2agew more
tool clamping area 0 mm
weight 0 t
Beltioca
Titan coated carbide rough milling and finish milling cutter with following diameters and different quantities available:
Ø 9,7 - 11,7 - 13,7 - 15,7 - 17,7 - 19,7 - 20,5 - 21 mm
cutter up to incl. 15 mm 15/pc. from 15 mm up 20/pc.! more
used
Drawer Cabinet tool Cabinet, steel Cabinet, garage Cabinet, vehicle equipment, vehicle, vehicle rack, width 765 mm depth 375 mm height 1280 mm - 6 x drawers
9sdbmk20e
-2 x storage
Weight 94 kg more
2010
used
tool taper VDI 20
shaft cross cut 20 mm
tool taper 20
ratio 2:1
turning speeds U/min
coolant ja / yes
Boley tool holder driven d106-02, gear transmission ratio 2:1, for following
BOLEY machines:Boley BC 32, Boley BC 42, Boley BE 42
good conditions, suitable for cross drilling & milling,radial
4 off on stock
Bfu2nu3sor more
radial tool holder, with internal cooling BMT 65 for DOOSAN; Hyundai Wia
Radial version // 90 degrees ( angled holder )
Manufacturer: RGX- Tools
Artikelnummer: RGX2-65/201-32/2.3-72(DO)
Tool holder: Collet ER 32
Internal cooling : yes ; 20 bar
Directly available from stock
Compatible with the following machines
Chevalier ᐳ FBL-300
DOOSAN ᐳ PUMA 2100/2600 M/LM/MS/LMS
DOOSAN ᐳ PUMA 2100/2600 Y/LY/SY/LSY
DOOSAN ᐳ PUMA 3100 M/LM/LY/XLM/XLY/ULM/ULY
DOOSAN ᐳ PUMA MX 2000/2500
DOOSAN ᐳ PUMA MX 2600 T/S... more
tool clamping area:ISO 50 mm
weight:0,15 t
appr. 70 ISO 50 arbors, partly with cutters
for sale single or in package
9ufxhnvz3 more
used
Double steel bracket, double steel bracket, double holder for turning tool setter
Size 120 x 120 mm
Arbor 33 x 49 mm
Bore ø 25 mm
M7gb9
-Resses Ø 80 mm
Weight 5.9 kg more
Axial drilling/milling head VDI30 ER25 "CC", Machine Model C-4212T, Live Tooling 180° VDI30 ER25
Boring bar holder E2-30x25 VDI30 "CC", Tool Holder E2-30x25/601E230250
Angular drilling/milling head VDI30 ER25 "CC", Machine Model C-4212T, Live Tooling
Iyag3ker more
Manufacturer: RGX-Tools ; Premium ; new ; premium quality
TYPE: straight holder ;
holder : VDI 30 ; clutch Okuma ; without internal cooling
Artikelnummer: RGX1-30/551-16/1JA
Bhwebhxu0y
Tool holder: Collet ER16 ( ER 25 / 32 also available )
Machine: e.g. Okuma LT 200 MY
Top quality at a fair price
Technical data
Max. Speed: 6000 rpm
Max. Torque : 18 Nm
Collet : ER16
Ratio : 1:1
cooling : external ( IKZ also available )
Warranty : 12 months more
used
Drawer Cabinet tool Cabinet, steel Cabinet, garage Cabinet, vehicle equipment, vehicle, vehicle rack, width 765 mm depth 475 mm height 885 mm - 3 x drawers
-1 x cabinet door
Weight 80 kg
Bwudxo9 more
used
conus taper --- mm
tool holder ---
2rgpce
toolpiece turning speed range --- U/min
tool taper - diameter ca. 50 mm
various tool holders of a Mazak Multiplex
17 driven
21 standard
Connection dimensions see photos more
SAUTER VDI 50 Axial Tool holder for power tools.
Type: 0.5.921.105 - 076 454 / 80317L
Collet chuck: ER32
VDI50 DIN6388 - B25
Shank length: 78
Bb0mnlb
Max speed: 4000 rpm
Max power: 10 kW (50Nm)
Weight: 6,3 kg
Almost unused, as new. Used as demo at exhibitions.
1 pcs Available. more
Bilz Quick change adaptors for tapping, The Quick change adaptors where used in beam drill lines for steel processing.
014-1 Bilz,WFLK340,TR,26X2 new
014-6 Bilz,WFLK340,TR,26X2 new
014-2 Bilz,WES3B,18X14,5,M22 new
Vfzy8ic
014-7 Bilz,WES3B,18X14,5,M22 new
014-3 Bilz,WES3B,18X14,5,M24 new
014-8 Bilz,WES3B,18X14,5,M24 new
014-11 Bilz,WES3B,18X14,5,M24 new
014-4 Bilz,WES3B,20X16,M27 new
014-9 Bilz,WES3B,20X16,M27 new
014-13 Bilz,WES3B,20X16,M27 new
014-5 Bilz,WES3B,22X18,M30 new
014-10... more
tool clamping area 150x18 mm
weight 0,001 t
Beni8lvoy8
turning tool with insert - like new.
L/W/H: 250x40x100 mm more
used
Tapping chucks tapping Chuck, threaded chucks, tapping
-with slip clutch
-Integrated clutch with reverse thread cutting sizes M5-M18
Bbyc2mhh7w
Recording MK3
Dimensions 380/95 mm
Weight 2.6 kg more
2015
as good as new (ex-display)
width 500 mm
height 300 mm
depth 570 mm
CNC-Table Attachment Frame
Producer: KOCEL
Type: 2755
YOM: new
Width: 500 mm
Depth: 570 mm
Height: 300 mm
Weight: ca. 9 kg
Number of CNC-tool holder slots: 16
Colour: RAL 5015 blue
Additional information:
Benzq2cnas
- Patented, innovative universal-plug-in system:
- Size adjustment of the tool holder slots as required
- So again and again possibility of newly arranged storage of 16 tool holders
in this table attachment frame
- Whether SK 30, SK 4... more
Number of drawer: 6 Stück
tool holder: 36 Stück
weight: 20 kg
Dimensions (HxWxD): 930x710x650 mm
Dvf7wfj
The trolley is suitable for tool tapers size SK40
on sale without tools or taper
i.D. more
2 WELDON HOLDERS D-12X130 HSK-A100
Bm2co9s8wh
1 WELDON HOLDER D-50X180 HSK-A100
4 PLATE HOLDERS D-40 HSK-A100
1 CLAMP HOLDER ER-16 HSK-A100
1 MORSE CONE HOLDER Nº3 HSK-A100 more
used
Cabinet with drawers, tool Cabinet, steel workshop Cabinet
Width 495 mm depth 475mm height 1030 mm-with door
500/450/H1030 dimensions mm
Bdy0pvs0e8
Weight 53 kg more
used
2 units tool holder set
32 tool holders HSK 100-A / 125B
Bixtk2ni7o
drawer insert 585 x 595 x 65 mm
weight approx. 13 kg
more
tool clamping area 50x50 mm
weight 0,003 t
Beni8ceje7
turning tool with insert - like new.
L/W/H: 400x50x50 mm more
dimensions: mm
weight: kg
Number of drawer:
: 4 St.
taper: der tools: SK 40
dimensions L x W x H: 0,6 x 0,75 x 1,16 m
Very well maintained tool trolley made of pipe construction, screwed with tools.
The tool holders are plugged in and removable.
Ztlanjfi
The trolley is mobile, with 4x wheels, 2 of them are fixed and 2 wheels are steerable with parking brake.
Handrails above the trolley. more
8 HIGH PRESSURE HYDRAULIC SLIDES HSK.-A 63 D-32
3 HIGH PRESSURE HYDRAULIC PORTS HSK.-A 63 D-25 L-125
4 HIGH PRESSURE HYDRAULIC SLIDES HSK.-A 63 D-6 L-70
1 HIGH PRESSURE HYDRAULIC DOOR HSK.-A 63 D-10 L-70
2 HEATERS HSK-A63 D-16 L-60
Bm2cmjymb8
2 HEATERS HSK-A63 D-20 L-100
2 HEATERS HSK-A63 D-18 L-100
2 HEATERS HSK-A63 D-6 L-100
3 HEATERS HSK-A63 D-6 L-50
1 HSK-A63 D-8 L-50 HEAT GUN
2 HSK-A63 D-10 L-80 HEATERS
1 PLATE HOLDER D-16 L-150 HSK-A63
1 PLATE HOLDER D-20 L-100 HSK-A63
1 WELDON HOLDER D-40... more
used
Cabinet with drawers, tool Cabinet, steel workshop Cabinet
Bdy0njjnew
Width 905 mm depth 505 mm height 1015 mm 1 x shelving
Drawers inside dimensions mm
Drawers height mm
Drawers with 3/4 extension
-with doors
Weight 72 kg more
various trolleys for tool holders SK40 and SK50
filled with holders and partly tools
Dxckc3
for 32 holders in SK50
for 48 holders in SK40
further interesting offers on our web-site
master-machines.com more
used
3 units tool holder set
53 tool holders HSK 100-A / 125B
drawer insert 890 x 465 x 65 mm
Bixtkr3djn
weight approx. 21 kg
more
We offer you:
Powered tool
Manufacturer: Oesterle + Partner
Type: BI-WZ01 ALI25
Item no.: 300 5522 E25 BI09
Ohuzl
Mounting: BMT 55, ER25 Collet
Free shipping within Germany;
International shipping on request
Scope of delivery see photos
Location: 22946 Trittau
Item no.: 001051
Immediately available
*** Subject to alterations and errors in the technical data and information and subject to prior sale! more
Dear customer, we are currently offering you a used TRIBOS clamping system of the brand Schunk. Here is the scope:
- 19 pieces tool holders HSK63A
- 16 Reductions
- 10 pieces clamping rings
- 1 piece TRIBOS unit
Bmeqwpoxem
VAT is shown separately on the invoice.
Dispatch against surcharge possible.
If you have any questions you are welcome to contact us. more
used
Thread-tapping jaws, replacement dies, thread-tapping head with Strehler baking, thread cutter, thread-cutting machine, pipe thread cutter
Bdfq7orsax
-Thread cutting sizes complete price
Weight 12 kg more
Various tool holders SK 40
-boring head with internal cooling 4 cutting plates, diameter 32x100mm, D 130mm, cutting head 50mmL, diameter 40 mm
-Quick action chuck, drill chuck 2.5-16mm, step drill 12mm diameter x 30 mm L
- Two pcs. Drill holder SK40
2r8zji
- Intermediate clamp square, EM03-U-ZOE
-cutter head 75mm diameter, 5 indexable inserts screwed
-drill chuck Bahmüller D25 A 100, SK 40, with drill bit 30 mm diameter,60 mm length, total length 120 mm
-Fast drill chuck SK 40 for small drills
-... more
used
4 units tool holder set
62 tool holders HSK 100-A / 125B
drawer insert 585 x 595 x 65 mm
Puf0vq
weight approx. 26 kg more
We offer you:
Powered tool
Manufacturer: Oesterle + Partner
Type: Bi-WZ 01 Ai
I8e7eljf
Item no.: 300 5521 E25 BI09
Mounting: BMT 55, ER25 Collet
Free shipping within Germany;
International shipping on request
Scope of delivery see photos
Location: 22946 Trittau
Item no.: 001050
Immediately available
*** Subject to alterations and errors in the technical data and information and subject to prior sale! more
as good as new (ex-display)
1x 2.5 - 16 mm
1x 0.3 - 16 mm
Bml790fhmt
1x 16 mm cutter head holder Form A SK 40 short
1x 16 mm collet chuck
1x 20 mm surface chuck form ADB 20 mm with cooling channels SK 40 short
1x 16 mm surface chuck form ADB 16 mm with cooling channels SK 40 short
1x 12 mm surface chuck form ADB 12 mm with cooling channels SK 40 short
1x 10 mm surface chuck form ADB 10 mm with cooling channels SK 40 short
1x 8 mm surface chuck form ADB 8 mm with cooling channels SK 40 short
1x 20 mm
Incl. mounting bracket more
Tool holder
Xuv20
Type: VDI 40
Price per piece 35 €
Minimum purchase 10 pieces
tool holders VDI 40
Price per 1p. 35 €
Minimum purchase 10 pieces more
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Sell now on Machineseeker! Over 160,000 inquiries per month
Photo gallery: The World's 10 biggest excavators
10 valuable tricks for buying used machines online
Machineseeker now also sponsering Greuther Fürth
Photo gallery: the 10 strongest forklift trucks in the world
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Accessories
Dealer for Accessories
