Used Hole Number for sale (28,624)

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Fgjdpfxertrx Rs Apwef Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: good (used), Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm -Accessories: incl. punching tool and 2nd table (see photos) Fodpfx Apsk D Nt Dowegf -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Technical data: - Cylinders: 6 - Hold-down units: 3 Fedpfxozryy Sj Apwogf - Pressing area: 260 x 145 cm

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Height: 3400mm Fsdpfxswyup Te Apwsgf Weight: 6500kg

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231598, Keyence International NV/SA – KEYENCE IM-7030 Year of manufacture: 2019 The KEYENCE IM-7030 is a highly precise digital measuring projector with automatic image processing and integrated optical probe. The system has been specifically developed for fast and non-contact measurement of workpieces in manufacturing and quality assurance. Thanks to the automatic measurement process activated by the push of a button, the machine is particularly suitable for serial measurements and recurring inspection tasks. Fjdpfxjzp Igzj Apwogf The machine combines simple operation with high measuring accuracy and enables rapid inspection of contours, diameters, distances, angles, and geometric features of various workpieces. Thanks to the wide-field and high-precision modes, both larger components and the smallest precision parts can be reliably measured. Manufacturer: Keyence International NV/SA Model number: IM-7030 Machine type: Digital measuring projector with optical probe Year of manufacture: 2019 Travel ranges in wide-field mode: X-axis: 100 – 300 mm Y-axis: 100 – 200 mm Z-axis: 75 mm Travel ranges in high-precision mode: X-axis: 25 – 225 mm Y-axis: 25 – 125 mm Z-axis: 75 mm Maximum table load: 1 kg Measuring accuracy in wide-field mode: ±1 µm at Ø100 mm ±2 µm at 200 × 300 mm Measuring accuracy in high-precision mode: ±0.5 µm at Ø25 mm ±1.5 µm at 125 × 225 mm Operation: Automatic measurement at the push of a button Control / Software: IM-H2C and IM-H2ED Suitable for series production: Yes Special features of the system include high measuring speed, simple operation without complex programming, and non-contact optical measurement technology. The KEYENCE IM-7030 is ideally suited for use in CNC manufacturing, precision engineering, incoming goods inspection, and industrial quality assurance. The machine can be inspected with power supplied after scheduling an appointment. Changes, errors in technical data and specifications, and prior sale are subject to change!

Condition: used, Year of construction: 1999, machine/vehicle number: IntNr231636, used CNC sliding head lathe Citizen L520, year 1999 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! CNC sliding headstock lathe Citizen L520, year 1999 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Fedpezp Ighsfx Apwegf Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Fjdjzp Ifwjpfx Apwjgf Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Counter spindle LNS Quick Load Servo 2 bar feeder Max. bar length: approx. 1,500–1,600 mm / 63" The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: used, Year of construction: 1999, machine/vehicle number: IntNr231509, A Miyano BNE-51S CNC lathe with IEMCA BOSS 552-HD bar feeder is for sale. Year of manufacture: 1999 Control: FANUC Series 18-T (dual-channel control) Technical Data Max. bar diameter: 51 mm Max. turning length: approx. 125 mm Travel paths: * X1 / X2: 150 mm / 115 mm; Z1 / Z2: 380 mm / 125 mm Y-axis: +/- 40 mm (upper turret) Spindles (main & sub spindle): Speed range: 135 – 5,000 rpm (both spindles) Drive power: 11 kW / 15 kW (main spindle) C-axis: 0.001° on both spindles for complete contour machining Tool system (2 x turrets): Fgedpfx Apjzp Ifqowef Turret 1 (upper): 12 stations (all live, including Y-axis) Turret 2 (lower): 12 stations (all live) Live tool speed: max. 3,200 rpm Bar feeder: IEMCA BOSS 552-HD Bar diameter range: 5 mm to 51 mm Bar length: up to 3,200 mm Chip conveyor Batec fire extinguishing system The machine can be inspected under power by prior arrangement. Technical data and specifications are subject to change and prior sale excepted.

Condition: good (used), Tools , drills will come without tool cabinet . Tool trolley with toolholders will come. Fodpfxjzd D N Is Apwjgf

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Fgedpfx Apszn Ah Rowjf Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: Bottom & end face - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Opening: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see pictures) Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Used machine Used row drilling machine of the company Ganner type RB 107 serial no.: 121627 Motor power: 1,5 kW Motor speed: 2800 rpm 1 drill beam with 26 spindles, center distance 32 mm 3 hold-down devices 1 foot switch Availability: short term Fgjdsw I Unwspfx Apwjf Location: Röllbach

Condition: used, Year of construction: 2011, operating hours: 48,000 h, machine/vehicle number: IntNr231180, DMG Gildemeister CNC Multi-Slide Automatic Turning Machine MSL 60/7 Year of manufacture: 2011 Machine on-time: 56,000 hours Automatic cycle hours: 48,000 hours Fgjdjznulbjpfx Apwsf CNC control: FANUC 31i – Model A, 7 axes Technical specifications - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 60 mm - Spindle speed: 5,000 rpm - Spindle drive power: 7.5 kW COUNTER SPINDLE (on turret) - Max. bar diameter: 42 / (60) mm - Spindle speed: 5,000 rpm - Spindle drive power: 3.7 kW Driven tools (turret): - Tool drive power: 3.7 kW - Max. speed: 6,000 rpm Back-side machining: - 4 fixed tool stations - Capacity for up to 14 tools possible Bar feeder: FMB Turbo 5-55 / 3200 / A Year of manufacture: 2008 Bar diameter: 5 – 55 mm Bar length: 3,200 mm Chip conveyor included Machine can be inspected under power by appointment. Technical data, details, and prior sale subject to change and error.

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Fgedpfoxnlfljx Apwsf

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters Fgsdjwh Rp Espfx Apwjf - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min Fgodpfx Apow E H E Rswof - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: used, Max. Stanzkraft: 500 kN Reach out: 610 mm Quick change device Variablely adjustable spindle Inclusive assortment of punches and dies Fgedpfx Apsu T Nv Dewsf Weight: 1700 kg Very good condition

Condition: excellent (used), functionality: fully functional, TRIADE FR3 S Drilling Machines for Turned Parts Number of drilling units: 3 1. Lower unit: 3 kW Fsdpjznmlyjfx Apwjgf 2. Upper unit: 1.5 kW 3. Lower unit: 1.1 kW (can also be used for screwing in sleeves/screws) Pneumatic material clamping system Application: Drilling of legs, turned parts, curtain rail components Weight: 1200 kg Dimensions: 115 x 128 x 180 cm (H)

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Fedpfsyuty Sox Apwjgf Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder Fgodpfx Apjxdttiewjf - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: used, Year of construction: 1997, Used machine Year of manufacture 1997 Universal dowel drilling machine with drilling from below heavy cast-iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any mitre angle drilling unit with digital positioning for zero-edge transfer, touch stops are used which, during horizontal drilling, transfer the tool thickness to the vertical drilling for row-hole drilling, the stop system is slid into guides on the side of the machine table Working width 700 mm Portal clearance max. 850 mm Drilling depth max. 80 mm Operating pressure 6-8 bar Motor 1.9 kW Spindle speed 2800 rpm 21 spindles, pitch 32 mm Spindle spacing min. 32 mm Spindle spacing max. 640 mm Space required L x W x H 960 x 630 x 1140 mm Weight approx. 300 kg Fgjdozlbqfspfx Apwsf Availability: at short notice Storage location: Flörsheim

Condition: repair required (used), functionality: not functional, Drilling machines for turned parts – TRIADE FIR-6 Defective – PLC controller missing. Fgedpfx Aozmxf Ajpwjf

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with Fedezlbrvspfx Apwegf ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: used, Second-hand machine For dowel drilling on flat or end faces with roller-bearing-mounted drill shaft and tapered claw coupling Fgjdpfxezk Nq Do Apwsf Driven by any hand-held drill Working width 650 mm with 7 drill shafts Swivelling drilling beam 0° – 45° – 90° Clamping height 80 mm Minimum drill hole spacing: 30 mm Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Fgedpfx Apezk N S Uowjf Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft Fsdpfxjzk N Dws Apwjgf - 1.5 kW motor at 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits Availability: at short notice Location: DE-63934 Röllbach