Used Hole Washers for sale (4,832)

Condition: new, functionality: fully functional, Year of construction: 2016, operating hours: 40 h, heating capacity: 12 kW (16.32 HP), product height (max.): 60 mm, product length (max.): 60 mm, product width (max.): 60 mm, machine/vehicle number: 40017, The KSN Drum Washer 350 UST Ultrasonic is an industrial cleaning system designed for efficient and thorough parts cleaning. Combining drum washing with ultrasonic cleaning technology, the system is particularly suitable for components with complex geometries, holes and cavities, as well as applications with high cleanliness requirements. Ultrasonic cleaning uses high-frequency sound waves in liquid to effectively remove contaminants while providing a gentle cleaning process without mechanical wear. Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring Djdpfx Aezy Euwjp Ioku You can find technical details in the PDF attached document.

Condition: used, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Cabinet Washer is a compact cleaning device designed for washing mechanical parts, tools, and workshop components. The enclosed cabinet limits liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other difficult contaminants. Cleaning is performed using a closed-loop circulating cleaning fluid system. The pneumatic gun allows the operator to apply a mixture of cleaning fluid and compressed air, and after the cleaning process it can also be used for blowing and drying the component. Main advantages of the AURORA MP150 washer Operating pressure of 5–8 bar – effective removal of oil, grease, carbon deposits, and dirt from hard-to-reach areas. Two-function pneumatic gun – enables cleaning with a mixture of fluid and air, as well as drying components using compressed air only. Closed-loop fluid circulation – reduces cleaning agent consumption during regular operation. Internal cabinet lighting – improves visibility of cleaned surfaces and difficult-to-access areas. Integrated protective gloves – allow convenient handling of components without opening the cabinet. Gas struts supporting the lid – make opening and closing the working chamber easier. Cabinet ventilation system – improves working conditions inside the machine. Compact design – allows installation on a suitable workbench or sturdy table. Cleaning and drying with one gun The AURORA MP150 cabinet washer is equipped with a pneumatic gun offering two operating modes. During cleaning, the nozzle delivers a mixture of compressed air and cleaning fluid, helping remove contaminants from holes, channels, recesses, and complex-shaped surfaces. After cleaning, the operator can switch the gun to compressed-air mode. This allows removal of remaining fluid residues and faster preparation of the component for further work, inspection, repair, or assembly. Enclosed and illuminated working cabinet The cleaning process takes place inside a closed chamber, which helps reduce splashing of the cleaning solution around the workstation. Integrated gloves allow free rotation and positioning of the cleaned component without opening the lid. The built-in cabinet lighting improves visibility of the workpiece, allowing the operator to accurately control the cleaning process on dirty surfaces, openings, and hard-to-reach areas. Closed-loop cleaning fluid system Cleaning is performed in a closed circulation system using fluid stored in the machine’s tank. The tank capacity is 8–14 liters. This solution allows repeated use of the cleaning agent and reduces fluid consumption during everyday workshop operations. The simple fluid replacement system makes draining and preparing the washer for further use easier. Dkjdpfxoz E Hnto Ap Ieu Standard equipment Two-function pneumatic cleaning gun Protective gloves integrated into the cabinet Internal cabinet lighting Ventilation system Gas struts supporting lid opening Compressed air supply adjustment system Technical specifications – AURORA MP150 pressure cabinet washer Parameter Specification Cabinet capacity 150 L Cleaning fluid tank capacity 8–14 L Operating pressure 5–8 bar Dimensions 770 × 610 × 700 mm Weight 29 kg Gun type Pneumatic, two-function Cabinet lighting Yes Ventilation Yes Please note!!! This is a display model (3 units available) and shows visible signs of corrosion. No warranty or returns.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 254002, type of input current: three-phase, overall weight: 130 kg, input voltage: 380 V, number of spindles: 8, input frequency: 50 Hz, Schleicher frame dowel hole drilling machine DBH 600, Drilling motor 1.5 kW, 380 Volt, 50 Hz, Dkodpfez Nkutjx Ap Ieu Drilling stroke 0 - 130 mm, Special drilling gear with 3 rows and 8 spindles, 1 clamping cylinder, Special stop system for window frames and window mullions Weight approximately 130 kg as is, at the Seevetal location, excluding transport, EXW (Ex Works), subject to prior sale.

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm TSH-400T CNC CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Repeatability: 0.01 mm Burr-free drilling Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Djdpfxsztyxdo Ap Ieku Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Maximum working current: 50 A Automatic guide changer: 5 guides Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Weight: 2100 kg Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, functionality: fully functional, Equipment: documentation/manual, MAGIDO L160E – industrial parts washer | ALMOST UNUSED We offer for sale a professional industrial parts washer, the MAGIDO L160E, manufactured in Italy. The machine has been used very little, making it an attractive opportunity for a company looking for a high-performance machine without the need to invest in a new one. The MAGIDO L160E is designed for the automatic washing and degreasing of large, heavy, and bulky parts. The parts are placed in a rotating basket and are intensively sprayed with heated cleaning solution during the working cycle. Key parameters: • Load capacity up to 700 kg • Basket dimensions approximately 1,100 × 1,100 mm • Usable height approximately 800 mm • Tank volume 350 liters • Maximum temperature 90 °C • Power consumption 27 kW • Power supply 400 V + N / 50 Hz • Machine weight 950 kg Dkedpfx Apsz Ng Ens Isu • Year of manufacture 2014 • Italian manufacturer MAGIDO Group • CE marking Ideal for cleaning engine blocks, gearboxes, castings, machine components, production components, and other large or heavy parts, removing oil, grease, and operational dirt. The main advantage of this machine: Despite being manufactured in 2014, the washer has been used only minimally – practically unused. Therefore, it is an attractive opportunity to acquire a professional industrial machine with a high load capacity at a significantly lower price compared to a new machine. Price: €14,999 excluding VAT Personal inspection is possible. If you are seriously interested, we will gladly provide further photos, information, or a video of the machine. MAGIDO L160E – 700 kg load capacity, professional industrial design, and minimal use.

Condition: new, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Cabinet Washer is a compact cleaning device designed for washing mechanical parts, tools, and workshop components. The enclosed cabinet limits liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other difficult contaminants. Cleaning is performed using a closed-loop circulating cleaning fluid system. The pneumatic gun allows the operator to apply a mixture of cleaning fluid and compressed air, and after the cleaning process it can also be used for blowing and drying the component. Main advantages of the AURORA MP150 washer Operating pressure of 5–8 bar – effective removal of oil, grease, carbon deposits, and dirt from hard-to-reach areas. Two-function pneumatic gun – enables cleaning with a mixture of fluid and air, as well as drying components using compressed air only. Closed-loop fluid circulation – reduces cleaning agent consumption during regular operation. Internal cabinet lighting – improves visibility of cleaned surfaces and difficult-to-access areas. Integrated protective gloves – allow convenient handling of components without opening the cabinet. Gas struts supporting the lid – make opening and closing the working chamber easier. Cabinet ventilation system – improves working conditions inside the machine. Compact design – allows installation on a suitable workbench or sturdy table. Cleaning and drying with one gun Dsdpfx Apsvugwme Ieku The AURORA MP150 cabinet washer is equipped with a pneumatic gun offering two operating modes. During cleaning, the nozzle delivers a mixture of compressed air and cleaning fluid, helping remove contaminants from holes, channels, recesses, and complex-shaped surfaces. After cleaning, the operator can switch the gun to compressed-air mode. This allows removal of remaining fluid residues and faster preparation of the component for further work, inspection, repair, or assembly. Enclosed and illuminated working cabinet The cleaning process takes place inside a closed chamber, which helps reduce splashing of the cleaning solution around the workstation. Integrated gloves allow free rotation and positioning of the cleaned component without opening the lid. The built-in cabinet lighting improves visibility of the workpiece, allowing the operator to accurately control the cleaning process on dirty surfaces, openings, and hard-to-reach areas. Closed-loop cleaning fluid system Cleaning is performed in a closed circulation system using fluid stored in the machine’s tank. The tank capacity is 8–14 liters. This solution allows repeated use of the cleaning agent and reduces fluid consumption during everyday workshop operations. The simple fluid replacement system makes draining and preparing the washer for further use easier. Standard equipment Two-function pneumatic cleaning gun Protective gloves integrated into the cabinet Internal cabinet lighting Ventilation system Gas struts supporting lid opening Compressed air supply adjustment system Technical specifications – AURORA MP150 pressure cabinet washer Parameter Specification Cabinet capacity 150 L Cleaning fluid tank capacity 8–14 L Operating pressure 5–8 bar Dimensions 770 × 610 × 700 mm Weight 29 kg Gun type Pneumatic, two-function Cabinet lighting Yes Ventilation Yes

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Dksdjrtrx Rspfx Ap Iou Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Facom foratrice Through-hole drill f-v3r-2l-3f+2tagr1 used 2015 Brand: Facom foratrice Model: Through-hole drill f-v3r-2l-3f+2tagr1 Description: Through-feed drill F-V3R-2L-3F+2TAGR1 All heads and saws are screw-adjustable with mechanical indicators. Drilling depth is controlled electronically. Minimum workpiece length: 300-350 mm Maximum: 2000 mm Automatic feeder Bsbtt Sov U Uw Ujx Nteda Djdpfxox Rd Elj Ap Ieku Double-sided cutting with angle adjustment Double-sided drilling with angle setting 3 drill heads top + 2 wheels + 2 rear All heads have angle adjustment Electronic position markers I can send a video via WhatsApp The machine is operational and connected; you can test it 2015 Year: 2015

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 350 mm, type of input current: three-phase, Sarix SX200HPM with integrated divider. Dodpfxoz I R Tfs Ap Ieku

Condition: used, functionality: fully functional, Year of construction: 1989, For sale: TRUMPF MINIMATIC 100 punching machine. Lightly used, in excellent condition, and comes with many tools. The machine is connected and can be tested. We can provide training on how to use the machine; all instructions are available. Specifications: Dedpfjy Udrmsx Ap Ijku Make: TRUMPF MINIMATIC 100 Made in: Germany Year: 1989 Capacity: 15 T / 150 kN Other: Automatic 9-tool changer Weight: 5T If you have any further questions, please do not hesitate to ask.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0165091297780, Offer 26265 Hydraulic flat bar and round bar shear with notching device and hole punch Technical data: - Flat bar shear, cuts up to 240 x 13 mm - Angle bar shear - Cuts L-shaped steel at 90° up to 100 x 10 mm - Cuts L-shaped steel at 45° up to 70 x 8 mm - Round bar shear - Cuts round steel up to 35 mm - Cuts square steel up to 32 mm - Notching device with square notching device - Hole punch - Punching force 600 kN - Reach 220 mm - Punches holes in steel up to 30 mm Ø in 15 mm - Punches holes in steel up to 24 mm Ø in 20 mm Dkjdpfxsz Ndxue Ap Isu - Various punching tools and dies - Electrical equipment – foot pedal - Drive 400 V / 4 kW - Space requirement approx. W 540 x H 1800 x D 920 mm - Weight approx. 1200 kg

Condition: used, Itec Boot & Sole Washer Entry and exit motion sensor activation Fully stainless steel Soap / detergent dosing facility E-stop Dksdpsz Nx Iujfx Ap Isu Ready for use

Condition: excellent (used), Year of construction: 2020, 583 USED MEIKO basket washer. Dksdpsz Ihvwjfx Ap Iju EQUIPMENT: - washer - left-hand table with sink - right-hand table - stainless steel mesh baskets TECHNICAL DATA: - year of production: 2020 - power supply: 3 N/PE 400V 50Hz - power: 22.9 kW The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: refurbished (used), Year of construction: 2017, BUCK TBFZ 3000 CNC incl. tools and clamping wedges The machine has been comprehensively overhauled and modernized. Conversion to Heidenhain iTNC530 including completely new control cabinet Travel: X-3000 mm, Y-1.500 mm, Z-1500 mm Dkedpfoz Ntr Ijx Ap Ieu Z1: 500 mm A-axis: +/- 20° Depth of drilling in a single pass Z: 1.500 mm Drill depth by readjusting Z1: 2.000 mm Drilling performance with single-lip internal thread drilling tools: 3-40 mm diameter NC rotary table 360° B-axis: 2.500 x 2.300 mm max. Tischladung: 25.000 kg Internal coolant supply (IKZ): 70/100 bar Spindle drive power at 60%: 20.5 kW Express travel X/Y/Z: 15.000 mm/min Spindle speed: 0-6,000 RPM Control: Heidenhain iTNC530 tool holder: SK50 Space requirements: approx. 8.5 m x 8.5 m x 3.5 m machine weight: approx. 24,000 kg max. table load: 25.000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional: ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Dkedogb Ec Hspfx Ap Iju Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm Dodpfx Aezk N S Uop Ijku - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2002, functionality: fully functional, Magido L90 parts washer / hot wash unit. Dkjdsz Ipd Aopfx Ap Isu

Year of construction: 2026, operating hours: 36 h, condition: used, functionality: fully functional, Product weight 2-500g, power220V/1P/50HZ, 0.6KW, Speed50-150pcs/min, machinesize: L1240*W535*H1130mm, SUS304,Weight 95kg The equipment can accurately divide the dough/pastry into evenly sized small dosages, which is suitable for the productionof variouspasta, and the divided dosage will be automatically beaten into the required shape, which has high production speed and high production efficiency. Hopper Material: 304 stainless steel 1. Food standard 2. The hopper is suitable for many kinds of fillings like dry filling, scattered filling and other fillings with poor liquidity. It is more anti-corrosion and stable. Enjoy a long life. Cutter and safety cover Features: 1. Easy to take apart and control product length. 2. Does not stick dough. 3. All the material which can touch food we also use healthy materials. 4. Can make different shapes by changing nozzles. 5. High-quality nozzle material. Used, in good condition, still under 1-year warranty from the manufacturer. Selling due to the factory closure. More videos & photos on request. Dkodpszx D Dbefx Ap Isu

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Djdpfx Apjx Ehg To Ioku

Condition: used, Year of construction: 1995, Hole row and fitting drilling machine Year of manufacture: 1995 Single-row hole row and fitting drilling machine Hinge plates and fittings can be processed without major retooling Workpiece width max. 600 mm Dedpsz H Dwnjfx Ap Ioku Drilling bar with 15 spindles, spacing 32 mm Indexing system, manual, with stop guides Drilling length max. 480 mm Motor 2.2 kW - 2800 rpm Drill chuck 10 mm with clamping surface Operating pressure 6 bar Weight: approx. 220 kg Availability: short-term Location: Flörsheim

Condition: used, Bous Waschfix: Industrial Cleaning and Degreasing System This system is ideal for workshops, production facilities, mechanical engineering companies, or automotive repair shops for the automatic and thorough cleaning and degreasing of workpieces, machine parts, and tools. The device cleans highly efficiently using a hot water spray process (up to +70 °C) with environmentally friendly, water-based cleaning agents (pH value 7–11). Thanks to the integrated two-hand safety control and the clear control panel, operation is absolutely safe and straightforward. • Integrated fine filter for a longer service life of the cleaning water and cleaner cleaning results. • Integrated drain pump for effortless draining of the tank during maintenance. • Compressed air blow-out function for subsequent drying of the cleaned components. Technical Data Manufacturer: BOUS Cleaning & Degreasing Systems Type / Model: WASCHFIX Year of Manufacture: 2006 Tank Capacity: 100 liters Operating Temperature: up to +70 °C Electrical Heating Power: 6 kW Dksdpfsz Nwbmox Ap Isu Compressed Air Connection: 6 bar (for blow-out function) Electrical Connection: 230 / 400 V Total Power Consumption: 17 A Control Voltage: 24 V DC / 50 Hz Net System Weight: approx. 500 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Dubus multi-spindle drilling machine. Dkjdsz Irn Repfx Ap Ieu Full specifications coming soon.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, drilling depth: 1,600 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 1,500 mm, overall weight: 50,000 kg, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 2,100 mm, table width: 1,900 mm, CNC Heidenhain iTNC 640 AXES OF MOVEMENT Maximum drilling depth in a single operation (V axis): mm 1,600 Table travel, horizontal movement (X axis): mm 3,000 Vertical movement (Y axis): mm 2,100 Column approach movement (milling) (Z axis): mm 1,500 Drilling slide tilting (resolution 0.001°) (A axis): +30° / -15° Table rotation (resolution 0.001°) (B axis): 360° Max axis feed rate: mm/min 10,000 Dodpfxjywnr Nj Ap Isku DEEP HOLE DRILLING AND MILLING SPINDLE – ISO 50 Solid drilling capacity: mm 5 – 25 Maximum drilling diameter: mm 40 Adjustable spindle speed: rpm 1 – 4,500 Spindle power S1: kW 17 Spindle torque: Nm 324 Standard drilling tool holder: mm Ø 25 x 70 Maximum internal spindle pressure: bar 120 Taper type: ISO 50 DIN 69871/A Coolant system: Yes ROTARY TABLE Rotary table dimensions: mm 1,900 x 2,100 Table rotation (resolution 0.001°) (B axis): 360° Table load capacity in rotation: kg 20,000 T-slots: mm 22 OIL SYSTEM Hydraulic pump motor power: kW 4 – 7.5 Self-regulated oil pressure: bar 15 – 120 Self-regulated oil flow rate: l/min 5 – 80 Oil tank capacity: L 800 – 1,000 Cooled oil temperature: 25 – 32 °C Filtration grade: micron 16 MACHINE DIMENSIONS AND WEIGHT Width x Length x Height: mm 7,000 x 7,900 x4,700h Machine weight: kg 50,000 DRILLING CAPABILITIES WITH GUN DRILLS Maximum depth: mm 1,600 Maximum rotation speed: rpm 4,500 Minimum drilling diameter: mm 6 Maximum drilling diameter: mm 40 THREADING HEAD “IMSASISTEM” WORKING FEATURES Max rotation speed: rpm 4,500 Maximum threading on C40 steel: M36 Machine equipped with: • Remote electronic handwheel Heidenhain • ISO 50 tool changer magazine with 40 positions • Fume extraction system 4,000 m³/hour • Through-spindle air/oil system • M24 threads on table side • Various tools and equipment • Tool rack with assorted gun drills • User and maintenance manual and CE declaration of conformity

Condition: good (used), functionality: fully functional, Used professional Gummi-Mayer parts washer. The unit has barely been used and is in very good, fully functional condition. Djdpfxoz Iha Ne Ap Ioku Please no email inquiries! If you have any questions, we are happy to assist you by phone. Inspection and collection only by prior telephone appointment! Subject to changes, prior sale, and errors.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good Kronen Salad & root washer and spin dryer, year of construction 2022. Maximum load for light vegetables: 2.5 – 3 kg Maximum load for heavy vegetables: 12 – 15 kg Dedpfoz D Ig Uex Ap Ieku If you have any questions or need more information, feel free to send us a message or give us a call.