Used Hole Number for sale (31,395)

Condition: used, Year of construction: 2008, machine/vehicle number: 30655, overall weight: 5,500 kg, total length: 2,540 mm, total width: 2,290 mm, total height: 2,340 mm, FICEP P51 - CNC PUNCHING & DRILLING MACHINE FOR FLAT BAR AND PLATES | YEAR 2008 | 800 KN The Ficep P51 is a CNC-controlled punching and drilling machine for automated hole processing of flat bar and plates. Punching and drilling run in a single pass with automatic material feed - saving marking, re-clamping and handling on parts with many holes. CONDITION & HANDOVER Used machine from stock, year 2008, serial number 30655. - Condition and function are confirmed during the viewing or upon request. - Viewing possible by arrangement (no demonstration under power). - Service and reconditioning before handover by arrangement. FUNCTION & APPLICATION A hydraulic punching unit and an integrated drilling unit process the workpiece in one pass. A carriage with hydraulic, self-adjusting grippers and ball screw drive positions the material under CNC control (Ficep MINOSSE). Processes: punching, drilling, marking, countersinking and tapping. Typical applications: structural steelwork and connection technology as well as the fabrication of beams, brackets and frame structures with a high share of holes. TECHNICAL DATA - Manufacturer: Ficep | Model: P51 | Year: 2008 | Serial number: 30655 - Machine type: CNC punching and drilling machine - Punching force: 800 kN (approx. 80 t) | Punching units: 1 - Max. punching diameter: 46 mm | Material thickness (punching): 3-25 mm - Drilling units: 1 | Spindle power: 7.5 kW | Max. drilling diameter: 28 mm - Plate width: 100-500 mm | Plate length: from 100 mm, not limited by design thanks to roller conveyors - Workpiece weight: up to 100 kg (standard) / up to 250 kg (reduced positioning) - Travel: X 1,000 mm | Y 500 mm | Positioning speed: 20 m/min - Carriage drive: ball screw | Clamping: hydraulic grippers - Control: Ficep MINOSSE CNC - Frame: one-piece steel C-frame with integrated hydraulic unit, electrics, pneumatics and CNC unit - Machine dimensions (L x W x H): approx. 2,540 x 2,290 x 2,340 mm | Machine weight: approx. 5,500 kg SCOPE OF DELIVERY - 1 x Ficep P51 main machine (one-piece steel C-frame) - 1 x punching unit (800 kN) - 1 x drilling unit (7.5 kW) - 1 x carriage with hydraulic grippers and ball screw drive - 1 x Ficep MINOSSE CNC control unit Lsdpfx Akjz Nyvyjqohn - 1 x hydraulic unit (integrated in the machine frame) - 1 x safety light curtain LOGISTICS & LOCATION Location: Ulft (Netherlands), close to the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, functionality: fully functional, The LASKA WW 130-2 is an industrial meat grinder from the LASKA brand.. With a 130 mm throat diameter and 15 kW of power, the machine is designed for efficient raw material grinding in medium and large meat and food processing plants. How does the LASKA WW 130-2 meat grinder work? Raw material is loaded into the hopper, from where a screw feeds it to the cutting set consisting of a knife and perforated plates. The rotating knife cuts successive layers of material forced through the plate holes, producing uniform grinding at the required coarseness. The degree of grinding depends on the perforated plate used, and the cutting set can be quickly disassembled for cleaning and replacement of parts. Key advantages of the LASKA WW 130-2 meat grinder The large 130 mm throat diameter and 15 kW drive power allow continuous, efficient work with large batches of raw material, which suits high-volume plants. Solid industrial construction ensures a long service life, and the simple working system makes operation, cleaning, and maintenance easier. The IP 55 protection class stated on the nameplate means the electrical system is protected against dust and water jets, which is important in environments where equipment is regularly washed down. Technical specifications of the LASKA WW 130-2 meat grinder Manufacturer: LASKA Ledpfx Aoz N Ax Rjkqehn Type: WW 130-2 Factory number: L 6850 Year of manufacture: 1999 Throat diameter: 130 mm Power supply: 3 x 400 V, 50 Hz Rated power: 15 kW Rated current: 28 A Protection class: IP 55 Capacity: up to approx. 5,000 kg/h Hopper capacity: approx. 175 l Compliance: CE Application of the LASKA WW 130-2 meat grinder The LASKA WW 130-2 meat grinder is used in meat processing plants for grinding meat in the production of cold cuts, sausages, minced meat, and fillings. The machine also performs well in other food processing plants, wherever efficient grinding of large quantities of raw material is required.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, side door, sandwich construction Equipment: - Lashing rails - 30mm Iso wall - Aero slope Net: €8,373.95 / Gross: €9,965.00 Article number: TKC227401820.07 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 405 x 184 x 205 cm • External dimensions (LxWxH): 563 x 235 x 269 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Tare weight: 865 kg • Payload: 1,835 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, stable, bolted V-drawbar • Very stable aluminum frame • Frame very torsion-resistant due to its stable construction • Floor panel made of Finnish multiplex • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Top layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • Aerodynamic slope on the side wall • Non-slip with gas springs • 2x maneuvering handles at the front • Doors with special sealing profiles, made of hard/soft plastic • Side door, standard on the right front, with three-bolt safe locking mechanism, lockable from inside and outside • Rear frame on hot-dip galvanized steel, welded solid • 8 lashing eyes recessed into the floor (750DaN/kg) • Slotted-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection all around in the interior • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pin connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request specific options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 Ledpfx Akjzy Arajqshn 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lowered suspension Equipment: - Spare wheel - LED lighting - Approach angle 10° Net: €5,693.28 / Gross: €6,775.00 Article number: A3T227451900.03 Technical data: • Brand: Brian James • Model: A Transporter • Vehicle type: Car transporter • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 450 x 190 x 0 cm • External dimensions (LxWxH): 620 x 229 x 69 cm • Loading height of the floor: 52 cm • Permissible total weight: 2,700 kg • Unladen weight: 755 kg • Payload: 1,954 kg • Chassis: Low loader (wheels next to the body) • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum alloy wheels in anthracite • Low-frame design enables an extra low loading height of 520 mm • Very stable steel frame, welded • Vehicle is also designed for all options after purchase: enormous potential for retrofitting: hydraulic tilting functions, winches, etc. can be retrofitted at any time • Closed loading area made of durable and resilient phenolic resin laminated wood with an anti-slip surface. • Front storage box with a spring-assisted lid • Pattern of holes for securing load made of galvanized steel • Numerous lashing points and a highly load-bearing floor offer flexible securing options and perfect grip. • Side panels color: red • Frame completely hot-dip galvanized • Easily extendable, roller-bearing ramps (2000 mm) ensure an extremely flat approach angle • Fold-out, spring-assisted support feet complement the extendable ramps. Can be folded in and out within seconds with your foot • Rear supports with dual function: When folded out, they support the load, and when folded in, they securely lock the ramps in their position during transport. • Spare wheel mounted • Reverse assist • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security ALKO lock • Very stable V-drawbar, REINFORCED • 13-pin plug • Reversing light • Large-sized LED safety lighting • Complete LED lighting: Extremely bright, durable and reliable. • Robust protection of the rear lights • Integrated rear fog light • Support wheel in the center • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about any specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Lhedezy Auhepfx Akqjn Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - official dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lowered suspension Equipment: - Spare wheel - LED lighting - Approach angle 10° Net price: €8,340.34 / Gross price: €9,925.00 Article number: A3T235552100.03 Technical data: • Brand: Brian James • Model: A Transporter • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 550 x 210 x 0 cm • External dimensions (LxWxH): 722 x 249 x 69 cm Ljdpezy A Hdofx Akqohn • Loading height of the floor: 52 cm • Permissible total weight: 3,500 kg • Unladen weight: 915 kg • Payload: 2,585 kg • Chassis: Low-loader (wheels beside the body) • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum alloy wheels in anthracite • Low-frame design enables an extra-low loading height of 520 mm • Very stable steel frame, welded • Vehicle can be fitted with all options after purchase: enormous potential for retrofitting: Hydraulic tilting functions, winches, etc. can be retrofitted at any time • Closed loading platform made of durable and robust phenolic resin laminated wood with a non-slip surface. • Front floor storage box, lockable with spring-supported lid • Pattern of holes for securing straps made of galvanized steel • Numerous lashing points and a high-load-bearing floor offer flexible securing options as well as perfect grip. • Side panels, color: red • Frame completely hot-dip galvanized • Easy-to-extend, roller-mounted (Easy-Glide) ramps (2000 mm) ensure an extremely shallow approach angle • Fold-out, spring-supported support feet complement the extendable ramps. Can be folded in and out with your foot within seconds • Rear supports with dual function: When folded out, they support the load, and when folded in, they securely lock the ramps in their position during transport. • Spare wheel mounted • Reverse assist • ALKO overrunning device and parking brake • Towing head made of steel casting with integrated high-security ALKO lock • Very stable V-shaped drawbar, REINFORCED • 13-pin connector • Reversing light • Large-sized LED safety lighting • Complete LED lighting: Extremely bright, durable, and reliable. • Robust protection of the taillights • Integrated rear fog light • Support wheel in the middle • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs declaration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale are reserved.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lowered suspension Equipment: - Spare wheel - LED lighting - Approach angle 10° Net price: €7,865.55 / Gross price: €9,360.00 Article number: A3T235502100.01 Technical data: • Brand: Brian James • Model: A Transporter • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 500 x 210 x 0 cm • External dimensions (LxWxH): 672 x 249 x 69 cm • Loading height of the floor: 52 cm • Permissible total weight: 3,500 kg • Unladen weight: 855 kg • Payload: 2,645 kg • Chassis: Low loader (wheels beside the body) Lhodpfxozy A Nxe Akqsn • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum alloy wheels in anthracite • Low frame design enables an extra low loading height of 520 mm • Very stable, welded steel frame • Vehicle designed for all options even after purchase: enormous potential for retrofitting: hydraulic tilting functions, winches, etc. can be retrofitted at any time • Closed loading area made of durable and robust phenolic resin plywood with an anti-slip surface. • Front floor storage box with lock and spring-assisted lid • Pattern of holes for wheel tracks made of galvanized steel • Numerous lashing points and a highly load-bearing floor offer flexible lashing options as well as perfect grip. • Side panels color: black • Frame completely hot-dip galvanized • Easy-to-extend, roller-mounted (Easy-Glide) loading ramps (2000 mm) ensure an extremely flat loading angle • Fold-out, spring-assisted support legs complement the extendable ramps. Can be folded in and out with your foot within seconds • Rear supports with dual function: When unfolded, they support the load, and when folded in, they securely lock the ramps in their position during transport. • Spare wheel mounted • Reverse driving automatic • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security ALKO lock • Very stable V-drawbar REINFORCED • 13-pin connector • Reversing light • Large LED safety lighting • Complete LED lighting: Extremely bright, durable and reliable. • Robust protection of the rear lights • Integrated rear fog light • Support wheel in the center • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, Sandwich construction Equipment: - Lashing rails - 8x lashing eyes - 30mm insulated wall Net: €7,050.42 / Gross: €8,390.00 Article number: TKC227401820.02 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 405 x 184 x 205 cm • External dimensions (LxWxH): 563 x 235 x 269 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Unladen weight: 870 kg • Payload: 1,830 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted Lhedpfszy Dbpox Akqjn DESCRIPTION • Reinforced, robust, screwed V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust construction • Floor panel made of Finnish plywood • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • Aluminum ramp • Non-slip, with gas springs • With 4 crossbars, hot-dip galvanized • Instead of 2 rear doors • With twist-lock closure, lockable • Loadable with max: 800 kg • 2x maneuvering handles at the front • Rear frame made of hot-dip galvanized steel, welded • 8 lashing eyes recessed in the floor (750DaN/kg) • Slot-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection all around in the interior • Maintenance-free rubber spring axles from ALKO • Reversing automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door-ramp combination, side door, sandwich construction Equipment: - 6 lashing eyes - Lashing rails - 30mm insulated wall Net price: €8,983.19 / Gross price: €10,690.00 Article number: TKC227351820.09 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer Lhsdszy Dkdspfx Akqen • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 355 x 184 x 205 cm • External dimensions (LxWxH): 521 x 237 x 267 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Tare weight: 810 kg • Payload: 1,890 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust construction • Floor made of Finnish plywood • Many crossmembers, resulting in high point load capacity • Body made of very strong steel sheet sandwich, insulated, 50mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • Doors with special sealing profiles, made of hard/soft plastic • Side door, standard on the right front, approx. 70cm, with three-bolt safe locking system, can be locked from the inside and outside • Ramp & door combination • Aluminum loading ramps can be switched to wing doors • Loading possible via ramp or also with a forklift from the rear • Non-slip with gas struts • With 4 crossbars, hot-dip galvanized • Instead of 2 rear doors • With swivel latch, lockable • Load capacity max: 800 kg • Continuous interior height: approx. 200cm • Continuous interior width: approx. 180cm • 2x maneuvering handles at the front • Rear frame on hot-dip galvanized steel, massively welded • 6 lashing brackets embedded in the floor (750DaN/kg) • Slotted-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reversing aid automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Ledpfx Akjzwg Tieqehn Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: used, Year of construction: 2005, functionality: unexamined, overall weight: 1,500 kg, total length: 1,250 mm, total width: 1,250 mm, plate height: 150 mm, plate width: 1,250 mm, plate length: 1,250 mm, Equipment: type plate available, FIBRO 4x Precision Changeable Pallet 1250x1250 mm / 1,500 kg / Pallet Changing System Description Manufacturer: FIBRO GmbH, Rotary Table Division Type: Precision Changeable Pallet 1,250 × 1,250 mm Year of Manufacture: 2005 Quantity: 4 pieces Package consisting of 4 solid FIBRO precision changeable pallets from an industrial pallet changing/rotary table system. The pallets were used as a machine interface and as a carrier for large workpiece clamping devices. These are not simple clamping plates, but precisely manufactured changeable pallets with indexing, pallet clamping, and integrated pneumatic transfer. Each pallet has a clamping surface of 1,250 × 1,250 mm and a weight of approximately 1,500 kg. The top surfaces have different, customer-specific hole patterns. The pallets are equipped on the underside with two mounted and aligned indexing rings each. The clamping slots have hardened strips as running and contact surfaces. In addition, each pallet has a pneumatic connection with one line. Technical Data - Quantity: 4 pieces - Dimensions per pallet: 1,250 × 1,250 mm - Height: approx. 150–160 mm - Weight: approx. 1,500 kg per pallet - Total weight of 4 pallets: approx. 6,000 kg - Pneumatic connection: 1 line per pallet - Indexing: P1 / P2 - Underside: 2 indexing rings per pallet - Clamping slots with hardened strips - Thread/hole patterns including M12, M20 and M30 - Customer-specific hole patterns - Original drawings or technical FIBRO documents available Lhjdpfx Aszxz Azjkqsn According to the manufacturer's data, the documented plan parallelism of the pallet top to the bearing surface is 0.025 mm, and the flatness is 0.040 mm. These are explicitly the original manufacturer's values and not a current measurement of the used pallets. Factory/Serial Numbers 1817739 / 002 1817739 / 003 1817739 / 004 1817739 / 005 The pallets have partially different article numbers and different customer-specific hole patterns. Accessories: The offer also includes the mechanical guide and rail set of the pallet changing system shown in the pictures, consisting of roller/guide rails, solid guide and support strips, stop and guide elements, and the existing fastening parts. Condition: Used condition from industrial application. The clamping surfaces show corresponding machining, clamping and wear marks, as well as some discoloration and superficial corrosion marks. The existing hole patterns originate from the original application. A current metrological check of the geometric accuracy has not been carried out. Sold in the existing condition and scope of delivery as shown in the pictures.

Condition: used, Year of construction: 2005, functionality: fully functional, RAKO 12-Jaw Precision Clamping System Ø 1,600 mm with Extensive Jaw Set (2 units in stock) Manufacturer: RAKO GmbH, Gelenau Manufacturer's designation: 12-Jaw Chuck Year of manufacture: 2005 Documentation date: 2006 Drawing number: 0684.00-00 Article number: MPT-1023 / 1024 Offered is a used, stationary RAKO 12-jaw precision clamping system for mounting on a fixed machine table. The clamping system was used for machining brass cages for ball and roller bearings. It is not a conventional turning chuck for a machine spindle, but rather a permanently mounted workpiece clamping device. The design features twelve basic jaws arranged radially and evenly around the circumference. This distributes the clamping force over numerous contact points. This clamping principle is particularly suitable for large, ring-shaped, thin-walled, sensitive, or easily deformable workpieces. According to the existing manufacturer's drawings, different jaw positions are possible for internal and external clamping. The clamping system has an outer diameter of approximately 1,600 mm and a weight of approximately 2,000 kg. Scope of delivery - RAKO 12-jaw clamping system, Ø approx. 1,600 mm - twelve radially arranged basic jaws - extensive set of various clamping and adapter jaws - different interchangeable and clamping elements - additional fastening and accessory parts as shown in the images - separate wooden crate with jaws and accessories - original RAKO operating manual - overall, section, and detail drawings - drawings of various clamping positions Lsdpjzx D A Djfx Akqehn The exact quantity and assignment of all jaws and accessories have not been finally determined. The scope of delivery is based on the images. Condition Used condition with signs of wear and tear due to age and use. Scratches, dirt, discoloration, and, in some places, slight surface rust or corrosion can be seen on the clamping system and individual accessories. Technical data - Outer diameter: approx. 1,600 mm - Weight: approx. 2,000 kg - Number of basic jaws: twelve - Jaw arrangement: radial and even - Clamping options: internal and external clamping - Jaw stroke: 28 mm according to drawing - Total clamping force: approx. 190 daN at 35 Nm actuating torque - Maximum torque on the actuating spindle: 100 Nm - Locking air: present - Maximum locking air pressure: 5 bar - Lubrication: on the twelve basic jaws and the actuating spindle - Transport: three threaded holes M30 for crane screws Mounting on the machine table According to the RAKO operating manual, mounting is done with 14 cylinder head screws M20 × 180 according to DIN 912, strength class 10.9. The specified tightening torque is 300 Nm. Jaws and accessories The scope of delivery includes an extensive range of different clamping and adapter jaws. Documented, among other things, is an adapter jaw H41 with drawing number 0721.02-03 and a finished size of 55 × 50 × 46 mm. Dimensions of clamping system: approx. 1,600 × 1,600 mm Height: to be determined Weight: approx. 2,000 kg Total shipping weight: over 2,000 kg plus accessories and packaging

Condition: like new (used), Year of construction: 2019, functionality: fully functional, HORIZONTAL MACHINING CENTER MAZAK HCN 5000 cnc Smooth G Lodpfx Ajz Iw Ezokqehn MACHINE COMPLETE WITH A 6-STATION PALLETECH SYSTEM AND A LOADING/UNLOADING UNIT RENISHAW OMP60 Control unit: SMOOTH G X-axis: 730 mm Y-axis: 730 mm Z-axis: 800 mm Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface with threaded holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm Spindle connection: ISO 40 Torque (continuous / 10 min): 168 NM Number of tools: 120 Pressure: 15 bar, preparation: 70 bar PALLET size: 500x500

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 106357-11, total length: 3,140 mm, total width: 1,800 mm, total height: 2,470 mm, overall weight: 3,500 kg, type of input current: AC, input voltage: 400 V, The machine was equipped with a new machine control system in 2024 and underwent a complete mechanical overhaul in 2025. The extensive overhaul involved the replacement of almost all essential components. As a result, the machine is in almost new condition technically. New control system in 2024: - SIMATIC S7-1500 PLC control system - SINAMICS S120 drive system Mechanical overhaul in 2025: Lhedpfxez Irfve Akqjn - New tailstock housing, drill bush holder, and spindle housing - New workpiece support and tool support - 2x high-frequency spindles - 2x tool holders - 2x rotating collet chucks - Quill, including bearing - Ball screw drive, including bearing - Linear guides - Radial piston pump - Water cooler - 2x drilling oil supply - Flow divider - Pipelines and hoses replaced - Various filters replaced - Complete repainting Optional: - Chip conveyor can be retrofitted Oil mist extraction: - Connections are available Tool accessories: - Individual design possible according to customer requirements/customer workpiece. The deep hole drilling machine uses the single-lip drilling process. Information on the drilling unit: - Drilling diameter min/max: 1-12 mm based on ST 60 - Drilling depth: approx. 400 mm - Number of spindles: 2 - Spindle spacing: 120 mm - Spindle drive: 2 x 3.5 kW - Spindle speed, continuously variable: 1000 - 20000 1/min - Feed rate, continuously variable: 10 - 15000 mm/min - Rapid traverse: 15000 mm/min - Slide stroke (nominal): 800 mm - Center height (above table): 100 mm - Coolant supply: Deep hole drilling oil Machine frame: - Welded construction with integrated coolant tank - Top of the frame with continuous linear guide rails Spindle unit: - Motor spindles with frequency-controlled, continuously variable speed control. - Spindle head with connection for tool holder. Drill bush holder: - In cast design, fixed on the machine bed. - Holder for tool guidance system with Ø50 mm - Holder for sealing housing and immersion sleeves with bayonet lock Rotating tailstock: - With drive for rotating workpiece - Clamping quills with workpiece length compensation Inspection of the machine and further information are available on request.

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above Lhjdpfozuynhsx Akqon (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Technical Specifications: Manufacturer: Thompson Meat Machinery. Model: 4200 M/M single-shaft mixer grinder. Serial Number: TMG.4200.259. Date of manufacture: 2002. Output capacity - up to 4,000 kg/h (depending on product). Hopper capacity - 390 litres. Mix capacity - up to 200 kg. Head size - #56. Supplied with various hole plates and other spare parts. Motors: Voltage (V): 415 V (for all motors). Frequency (Hz): 50 Hz (for all motors). Total Ampage: 35.8 A. Lhodpfx Akjzuzl Ujqen

Condition: ready for operation (used), Fanuc A06B-0853-B100 / B-65152E AC spindle motor, serial number: C987J1757 – has a hole in the shaft (see photos), used, in good condition, 100% functional, scope of delivery as shown in the photos. Ljdpfx Aozu El Sekqehn

Condition: excellent (used), ROMI GL 240 2 Axis CNC Lathe Swing over Z axis cover mm 420 Maximum cutting diameter mm 300 Maximum cutting length mm 400 Travel (X axis) mm 188 Travel (Z axis) mm 400 Spindle nose ASA A2-5" Spindle hole diameter mm 58 Bar capacity (dia.) mm 51 Speed range rpm 6 to 6000 Rapid traverse (X & Z axis) m/min 30 Number of stations atc 12 AC spindle motor hp/kW 20/15 Lhjdpfx Aezu Nggekqon

Condition: new, *IMMEDIATELY AVAILABLE* Includes: H-frame, railing Equipment: - Welded frame - 6 lashing points - H-frame at the front Net: €2,079.83 / Gross: €2,475.00 Article number: AZL113251337.01 Technical data: • Brand: Hapert Trailers • Model: Azure L-1 • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 250 x 130 x 37 cm • External dimensions (LxWxH): 382 x 178 x 132 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,350 kg • Unladen weight: 330 kg • Payload: 1,020 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized with profile channel on the outside • Accessories such as tarpaulin buttons, hooks, or ring eyes can be mounted with hammer-head screws without drilling. • Screen-printed wood floor, continuous without joints, non-slip, and waterproof • Rear tailgate made of aluminum in the proven Hapert design • Side panel retaining ropes on the rear tailgate • Hinges for the rear tailgate welded to the frame • Stable eccentric locks for the rear tailgate, recessed in the side panel profile • Very stable steel frame, welded • Frame completely hot-dip galvanized • Reinforced, stable, bolted V-drawbar • Steel fenders • Option to insert at all 4 corners for tarpaulin frames, lattice attachments, side panel attachments, or front wall extension • Many stable cross members, resulting in high point load capacity • Lateral side panel struts welded (increased lateral stability) • H-frame at the front, removable (front wall gallery) • Hole railing on three sides, 6 cm (Combi Protect Rail), also usable with locking bars and lashing straps - round holes 25 mm, elongated holes 54x25 mm Ledpfx Akozu N Rxjqehn • 6 lashing eyes recessed on the inside in the side edge (1000 DaN/kg), TÜV certified! • Maintenance-free rubber spring axle from KNOTT • Reversing automatic • KNOTT overrun device and parking brake • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to ask about any specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, Year of construction: 1998, Number of spindles in the hole row: 11 Number of horizontal spindles: 3 Lsdpfx Asz I Ivdskqjhn Pot-band drilling head: yes, Hettich Drill spacing: 32mm Power consumption: 2.2kW Drilling unit: swiveling

Condition: ready for operation (used), Year of construction: 2020, For profitable performance. For individual furniture production. For industrial requirements. The profit H80I CNC machining center is an integral part of the intelligent F4®Solutions production process, which will be the only answer to the expectations regarding profitable furniture production in the future. The profit H80 center for cutting, drilling, and milling panels enables highly efficient furniture 4.0 production, guaranteeing a secure future for furniture and woodworking companies. Completely dimensioned furniture components, including all holes, grooves, and joints, will be produced with a single clamping operation at the push of a button. The latest nesting technologies ensure the highest possible material and time savings. The profit H80I can be flexibly expanded, even to a fully automated version, through various loading and unloading solutions, allowing for maximum throughput. Lhodjz Hkiwepfx Akqsn With F4®Solutions, a seamless, efficient, and economical production process will be created, taking into account each individual furniture component. Tools in the form of software for extreme efficiency are part of the entire production chain. Simple design of original furniture in a familiar CAD environment. Photorealistic rendering supports communication with the customer through 3D visualization. Accurate transfer of files to all integrated machines, including economical nesting optimization. Even the final assembly of the furniture takes place with the support of clear assembly drawings and 3D files – this is 4.0 for crafts and industry. » Automation solutions FORMAT4. Uncompromising competence for the highest requirements. The premium brand from Felder Group has been meeting the highest requirements of professional users since 2001. Tailor-made, high-performance solutions are uncompromisingly innovative, offering maximum ease of use and the highest efficiency. drilling/milling head, nesting software for this, a slatted table with dimensions of 2 meters wide and 3 meters long, automatic unloading, and chip blowing. Number of operating hours: 10,000 only.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, sandwich panel construction Equipment: - Lashing rails - 6x lashing eyes - 30mm insulated wall Net price: €6,008.40 / Gross price: €7,150.00 Article number: TKC227351820.01 Technical data: • Brand: Vezeko • Model: TK C Lhsdpfx Akeyivbzsqon • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 355 x 184 x 205 cm • External dimensions (LxWxH): 521 x 237 x 267 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Unladen weight: 775 kg • Payload: 1,925 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust design • Floor made of Finnish plywood • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • 2-wing rear door with stainless steel locking mechanism • Continuous interior height: approx. 200cm • Continuous interior width: approx. 184cm • 2x maneuvering handles at the front • Doors with special sealing profiles made of hard/soft plastic • Rear frame made of hot-dip galvanized steel, welded • 6 lashing points embedded in the floor (750 DaN/kg) • Slot-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reverse automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, side door, sandwich construction Equipment: - 30mm insulated wall - Lashing rails - Aero slope Net price: €6,718.49 / Gross price: €7,995.00 Article number: TKB115301519.07 Technical data: • Brand: Vezeko • Model: TK B • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 305 x 152 x 193 cm • External dimensions (LxWxH): 455 x 205 x 256 cm • Loading height of the floor: 59 cm • Permissible total weight: 1,500 kg • Unladen weight: 635 kg • Payload: 865 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle Lhsdpfxoyivb Ue Akqon • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, sturdy, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust construction • Floor made of Finnish multiplex • Many cross members for high point load • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • Aerodynamic slope on side wall • Aluminum ramp • 2x maneuvering handles at the front • Doors with special sealing profiles, made of hard/soft plastic • Side door, standard on the right front, with three-bolt safe locking system, lockable from inside and outside • Rear frame on hot-dip galvanized steel, solidly welded • 4 lashing eyes recessed into the floor (750DaN/kg) • Slotted hole lashing rail, mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reversing automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: good (used), Technical Data of the Pallet Racking System: Racking system: SSI Schäfer Type: PR 600 Technical Data of the Installation: Ljdpfxeyaxmhj Akqjhn Number of racking rows: 01 pcs Length per row: 22,500 mm Number of bays per row: 08 pcs Number of levels incl. ground level: 02 pcs Volume Specifications: Pallet spaces per bay: 09 pcs Pallet spaces per row: 72 pcs Total pallet spaces: 72 pcs Based on: Load carrier: Euro-pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. weight per pallet: 1,100 kg Scope of delivery includes: 09x pallet rack uprights, used Material finish: Sendzimir galvanized Upright type: P113 Profile dimensions: 100 x 100 x 2 mm Incl. horizontal and diagonal braces, upright protectors and foot plates The uprights are pre-assembled (bolted truss construction) Height: 4,000 mm Depth: 1,100 mm 32x beam pairs, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5-hook Max. load per beam pair: 3,300 kg (with evenly distributed load) Note: The load-bearing capacity of the beams remains functional despite the holes— SSI project with thermal dust panels as per manufacturer's specifications screwed on! 64x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 36x anchor bolts, new Manufacturer: Hilti Type: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 18x levelling plates, used Design: fully galvanized For levelling uprights standing on uneven floors 01x load capacity sign With information on bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only available for collection. Any requested transport or shipment of this item will incur additional costs, which can be requested separately from us depending on delivery location and scope.

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: 09623212, Soundproof housing Motor power: 3 kW Dimensions of the grinding chamber: 220 x 170 mm Number of rotor blades: 3 Number of stator blades: 2 Lsdpfxezimw Eo Akqohn Rotor diameter: 170 mm Rotational speed: 270 rpm (at 50 Hz) Sieve hole diameter: 5 mm The mill is new and has never been used! PRICE REDUCED FROM 5950 TO 5350 EUR!!!

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 300 mm, table length: 450 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 400 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 400 mm Lhedpfozpwx Hex Akqen Work table surface area: 300 x 450 mm Number of threaded holes: 2 x 6