Used Milling machines - univ.conv. 0-399mm X-axis travel for sale (68)

Condition: used, Year of construction: 1986, x-travel 700 mm y-travel 500 mm z-travel 500 mm Control CNC 432 total power requirement 10 kW weight of the machine ca. 4 t dimensions of the machine ca. 3 x 3 x 2,6 m No. 0052 Universal tool milling machine MAHO MH 700 C Working area: 700 x 500 x 450 Drive: 10 kW Control: Philips CNC-432 Fixed table Fully protected cabin with 3 sliding doors Tool holder: ISO-40. Kdjlsucpqashccqpjn Speeds: 20-3150 min-1 Feed rate: 1-3000 mm/min, rapid traverse 6 m/min

Condition: used, Year of construction: 2012, x-travel 400 mm y-travel 300 mm z-travel 355 mm turning speeds 40-2000 U/min table surface area 320 x 750 mm stroke of quill vertical 80 mm tool taper SK 40 feed stepless 40-2000 mm/min pivoting angle +/-45° Grad Kolhswqr Izjccqpsdn rapid traverse 1500 mm/min total power requirement 2,2 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1215 x 1200 x 1800 mm Conventional tool milling machine Wagner FCA 400, year of manufacture 2012 good condition, from educational institution Two machines built in 2012 & 2011 are available. with 3-axis digital display, feed and rapid traverse in x, y, z Manual is complete (German language). 06.03.2025 Service for broken spindle is finished. All is running well. Technical Data Table clamping surface, mm 750x320 Number of T-slots 5 T-slot width, mm 14 T-slot spacing, mm 63 Distance Spindle nose table, mm 50-410 Distance Spindle centre stand, mm 140-450 Swivelling range of the milling head +/- 90° Horizontal spindle holder DIN 2080 ISO 40 Horizontal spindle: Number/speeds, min-1 40/18 - 2000 Distance spindle centre table, mm 85-455 Feed rates in X-Y-Z axis/number, mm 12/10 - 380 Rapid traverse X and Z-axis, mm/min 1500

Condition: excellent (used), Functionality: fully functional, Speeds: Row 1, stepless 150 – 1000 rpm Row 2, stepless 300 – 2000 rpm Mount: ISO 30 Kdolhcjwqqwzocqpjn Feed rate in X approx.: Row 1, stepless 15 - 60 mm/min Row 2, stepless 50 – 250 mm/min Travel range approx.: in X 280 mm in Y 170 mm in Z 250 mm

Condition: good (used), Functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Z-path 340 mm Tool holder SK40 Speed 40-2000 rpm. Kelhcjwp Hikecqpedn Control Active HEIDENHAIN TNC Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. TBH 1200x1100x1600 mm

Condition: excellent (used), feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, overall weight: 450 kg, For sale is a universal milling machine from the renowned brand EMCO (Austria). The machine is in very good working order and is equipped with an Elesta digital readout (Heidenhain scales). The machine can be viewed and tested at our premises by prior arrangement. See pictures for technical specifications and dimensions. Scope of delivery: Emco F3 universal milling machine 3-axis digital readout with Heidenhain scales Kslhcsv T Ad Hocqpjdn Various SK30 tool holders Operating manual Chip tray The digital display has a small mark. On the 4th seven-segment display of the X-axis, viewed from the right, the middle line is not illuminated, so some numbers look a bit strange, such as 4, 5, and 3, in fact, everywhere the middle line is needed. This shouldn't be a major problem, however, as the display still counts perfectly. Shipping conditions: EXW We can assist with loading. A suitable forklift is available. We would also be happy to recommend a shipping company. Please contact us. As is customary with used machines, any warranty (liability for material defects) is excluded. All information is provided to the best of our knowledge and belief. We reserve the right to make errors.

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Kdslhcjwm Rqascqpjn Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Condition: excellent (used), Year of construction: 1982, Functionality: fully functional, machine/vehicle number: 56283, Universal milling machine ACIERA F 3 with tooling in very good condition. Machine comes from a training centre. Technische Daten: * Machine-Nr. 56283 * Spindelspeeds: 100 – 2000 rpm * turn tilt tilt table * Powerfeed X Achse * Spindle brake * Travel X/Y/Z: 300/300/135 mm Kdslhewgxxxjccqpsn * Spindelnose W20 * Weight ca. 500 Kg Accessories and tooling: * Collets W20 1 / 20mm 1 mm up. * 3 pc cutter holders * 1 drill chuck * machine clamp * Pulrod for horizontal milling * Complete set machinebooks Offered universal milling machine Aciera F3 is complete with many tooling and in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. The machine is mechanical and electrical complete tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: used, Year of construction: 1970, Weight: approx 2 t. dimensios: Kdslhccqjtfgt Ejpsn 1 x 1 x 1,5m *

Condition: good (used), Technical data for type UW 10 . ISO 40 mount Quill stroke 60 mm Table surface 600 x 250 mm Speeds 45 - 1950 rpm Feeds 10 - 470 mm/min...continuously...adjustable... . Travel paths with feed approx.: Longitudinal travel (X) 315 mm Cross travel (Y) 180 mm Vertical travel (Z) 320 mm . Kdolhccowplqtsqpjn .

Condition: like new (used), Year of construction: 2021, Optimum OPTImill MZ 2S tool milling machine Ideal for training workshops!!! Available now With digital 3-axis position display DP 700 from NEWALL. With inverter drive of the feed axes controllable via the control panel. Versatile range of applications Excellent damping properties and stability of the machine frame All guides are hardened and precision-ground and can be adjusted using wedge strips Automatic feed in X-, Y- and Z-axis, infinitely adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screw in all axes Central and clearly arranged control panel with integrated digital position and speed display Massive cross table, generously dimensioned and precisely surface-machined with 5 T-slots Coolant device Large handwheels with scale Machine lamp Smooth running Manual central lubrication TECHNICAL DATA Dimensions and weights Length (product) approx. 1239mm Width/depth (product) approx. 1168mm Height (product) approx. 1900mm Weight (net) approx. 1400kg Drilling/milling head Milling head swivel range ± 90 Drilling/milling capacity Cutter head size max. 100mm Drilling capacity steel (S235JR) 30mm Continuous drilling capacity steel (S235JR) 26mm Kdoljuqix Ushccqpon End mill size max. 25mm Electrical data Drive motor power 2.2kW Supply voltage 400V Mains frequency 50Hz Horizontal milling table Horizontal milling table length 750mm Horizontal milling table width 320mm Distance vertical spindle - horizontal milling table min. 75mm Distance vertical spindle - horizontal milling table max. 410mm Horizontal milling table T-slots size 14mm Horizontal milling table T-slots quantity 5 Horizontal milling table T-slots distance 63mm Distance horizontal spindle - horizontal milling table min. 70mm Distance horizontal spindle - horizontal milling table max. 400mm Horizontal milling table max. load 285kg Vertical milling table Vertical milling table length 830mm Vertical milling table width 250mm Vertical milling table T-slots size 14mm Vertical milling table T-slots quantity 2 Vertical milling table T-slots distance 63mm Coolant system Coolant pump(s) Drive power 95W Travel distance Manual X-axis travel 400mm Manual Y-axis travel 200mm Manual Z-axis travel 335mm Travel path X-axis automatic approx. 310mm Travel path Y-axis automatic approx. 160mm Travel Z-axis automatic 295mm Vertical spindle Vertical spindle throat depth 100mm Vertical spindle Spindle holder ISO 40 DIN 2080 Vertical spindle Speed range 50 - 1890min¯¹ Vertical spindle Number of speed ranges 12 steps Vertical spindle Tightening bar M 16 Vertical spindle Quill stroke 120mm Vertical spindle Load max. 1100Nm Feed speed Bjpvld3Hbf Feed speed X-axis 10 - 600mm/min Feed speed Y-axis 10 - 600mm/min Feed speed Z-axis 10 - 600mm/min Electrical connection Total connected load 4kW Motor(s) Rapid traverse X-axis power drive motor 0.375kW Rapid traverse Y-axis power drive motor 0.375kW Rapid traverse Z-axis power drive motor 0.375kW

Condition: excellent (used), Year of construction: 1979, Manufacturer: MAHO milling machine - top condition as a training machine - Little used - Special price: 7500 euros net plus VAT = 8925 euros gross including VAT Model: MH 300 Travel paths: x: 300 mm Y: 350 mm z: 200 mm Swivelling head with SK40 mount Quill feed Kolhevv N Uwjccqpjdn Adjustable axis feed Clamping table: 500 x 260 mm Location: from stock 54634 Bitburg - available at short notice -

Condition: used, Year of construction: 1991, Weight 10.000 kg Year 1991 Control Heidenhain 355 serial number 9101291 x-axis 2500 mm y-axis 940 mm z-axis 1000 mm 2100 Kdslhjwmww Teccqpjn table length 2600 mm ja

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, machine/vehicle number: 56366, Universal milling machine ACIERA F 3 with tooling in very good condition. Machine comes from a training centre. Technische Daten: * Machine-Nr. 56366 * Spindelspeeds: 100 – 2000 rpm * Angle table * Powerfeed X Achse * Spindle brake * Travel X/Y/Z: 300/300/135 mm * Spindelnose W20 * Weight ca. 500 Kg Accessories and tooling: * Collets W20 1 / 20mm 1 mm up. * 3 pc cutter holders * 1 drill chuck * machine clamp * Complete set machinebooks Kdelhowgx D Usccqpon Offered universal milling machine Aciera F3 is complete with many tooling and in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. The machine is mechanical and electrical complete tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Year of construction: 1976, Condition: reconditioned (used), Universal tool milling machine Make: DECKEL Kslhccqsflc N Aspjdn Model: FP 1 Year of construction: 1976 - workshop tested Machine no.: 53426/08 geometric acceptance with test report Accessories: - 3-axis digital display Heidenhain ND 750 - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Counterholder with counter bearing - Operating instructions - used, as seen, but without guarantee -

Year of construction: 1969, Condition: good (used), Univ. tool milling machine DECKEL type FP 1 Machine No. 37101 Year of construction approx. 1969 travel X: 300 mm Y: 150 mm Z: 340 mm Kelhel Dx I Sjccqpsdn table size 600 x 200 mm spindle mounting MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,0 and 1,5 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - pinol shift at vertical milling head 60 mm - adjacent control cabinet space requirement L x W x H 1000 x 900 x 1750 mm weight 690 kg good condition accessories: - collets - rotary table - vice - Counterholder H. Milling

Condition: used, Year of construction: 2023, gebraucht 2023 4546 prompt, Zwischenverkauf v Taiwan 32800 € 1 65 - 2600 U/min ISO 40 420 x 220 x 380 mm 840 x 390 mm 2.2 kW 1600 mm 1700 mm 2000 mm 1145 kg 840 x 390 mm 1000 mm/min 5 14 x 63 mm 200 kg 420 mm 220 mm 380 mm 0 - 600 mm/min. 0 - 600 mm/min. 65 - 2600 90 - 310 mm 65 - 2600 +/- 90° ° 100 mm manuell 2,2 kW 950 x 250 mm 90 - 310 mm 100 - 480 mm demo machine / mint condition net price (price for new machine € 39.600,00) swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches Kolowirdgjhccqpjdn outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Z axes level pads and bolts tool box with tools operating manual in English or German according to CE rules

Condition: excellent (used), Universal milling machine Maho Type: MH 300 Drive: brake motor for milling spindles KW: 1.1 Main gear: sliding gear, geometrically stepped. - 1.25 Number of gears: 18 Table clamping area: 520 x 260 mm x-travel: 300 mm y-travel: 350mm z-travel: 200 mm Spindle mount: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Kdjlevyuaashccqpon Digital display Feed rates X,Y,Z Total power requirement: 1.5 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 800 kg Location: from stock 54634 Bitburg - available immediately -

Condition: used, Year of construction: 1968, Second-hand milling machine The milling machine is still functional, but a few Kdelhcjwl I Adscqpen control elements no longer operate smoothly. A final examination for a machining mechanic was last taken on this machine 3 years ago. -Clamping table: rotatable/tilting/swiveling -Travel X/Y/Z: 550/340/420 mm Weight: approx. 1780 kg Clamping jaws and tools are also included. Important note: The milling machine is only available for pickup. We do not have a forklift; only standard pallet trucks are available. This means that all transport, including loading, must be undertaken by the buyer.

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable Kdelhccqoiy Ekvopon - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg good condition

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2101-1067 Milling head type: 2171 Milling head number: 1086 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X and Z axis - Fixed table 600 x 200 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 Kdolhccjchfyfoqpsn - Coolant system - Operating instructions - used as seen -

Condition: excellent (used), quill stroke: 80 mm, Milling machine Make Korradi Type UW 003 Spindle Spindle SK 40 Table size 800 x 350 mm X path 600 mm Y path 400 mm Z path 400 mm 12 spindle speeds from 30 - 1800 na/min. Digital readout lengthwise and crosswise 18 feed steps from 6 - 270 mm/min. Kdoljqfc R Eshccqpjn Vertical swivel head Quill stroke 80 mm Transport dimension : Width 1400 mm Length 1500 mm Height 1900 mm Weight 1960 kg

Condition: used, Year of construction: 2004, gebraucht 2004 4540 prompt, Zwischenverkauf v Österreich 23700 € 1 19900 € 63 - 3150 (18) U/min 700 x 500 x 500 mm 900 x 500 mm Kdelhowirmnsccqpen 6.6 kW 2150 mm 2220 mm 2120 mm 2550 kg 500 kg 100 mm CNCHeidenhain TNC 410 18. mech. feeds with rapid travel in X,Y,Z axes ball screw spindles toolmaker accuracyDIN 8615 hyd. tool clamping with holdersSK40 vertical und horizontal vertical spindle+/- 30° swiveling swing out device digital 3D edge finder work area protection coolant equiptment aut. central lubrication fixed angle table with 10 t-slots chip collecting tray machine lamp users manual in GERMAN + CE COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO & UVV)

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW Kslhccqotwlwzjpjdn >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: new, Universal milling machine Make: OPTimill Model: MT 60 Item no.: 3336090 Condition: New machine Kjlhjg Anfnjccqpsdn Travels: - X-axis 750 mm - Y-axis 230 mm - Z-axis 360 mm equipped as standard with - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - B 18 drill chuck holder - Gear rim drill chuck 3-16 mm / B 18 - Reducing sleeve MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - T-nuts - Coolant device - LED lamp - Operating tool - Operating instructions

Condition: new, Universal milling machine Make: OPTimill Kdslhccsbnfxuoqpjn Model: MT 50 Item no.: 3336005 Condition: New machine Travels: - X-axis 580 mm - Y-axis 200 mm - Z-axis 340 mm serially equipped with: - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - Long milling arbor 16 mm - Mandrel long 22 mm - Drill chuck holder B 18 - Gear rim drill chuck 3-16 mm/B 18 - Reducing chuck MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - Machine light - Coolant device - Operating tool - Operating instructions