Used Milling Mashinebridge Type for sale (45,243)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Dwedpfxoyahv So Ai Eed Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: used, Mecof CNC Bed Type Milling Machine x 9000mm Key Specifications Manufacturer Mecof Condition Used Dwedpfsy N Amxox Ai Ejd Stock Number 00265 Table Size 9000 mm × 2200 mm X-Axis Travel 7200 mm Y-Axis Travel 1008 mm Z-Axis Travel 2040 mm Universal Head Heidenhain TNC 426 CNC Control Hand Wheel

Condition: used, Year of construction: 1980, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Universal bed-type milling machine Machine weight: approx. 11 tons Travel distances X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 630 mm Spindle and tool holder Spindle taper: SK 50 Speed range: 20–2,000 rpm Horizontal milling spindle: SK 50 Vertical milling spindle: SK 50 Feed rate and rapid traverse Feed rate: 10–6,000 mm/min Rapid traverse: 6 m/min Work table Table load: max. 5,000 kg Control system Control system: Philips NC 6664 Axes: 4 Program memory: available Rotary table Dsdpfx Aij Aa Ahre Eowd Rotary table: NC-controlled Diameter: 630 mm Electrical data Total power requirement: 18 kW Control cabinet Control cabinet dimensions: 1,800 × 530 × 2,000 mm Dimensions Space requirement: approx. 4.6 × 2.9 × 2.62 m EQUIPMENT NC-controlled rotary table Hydraulic tool clamping Coolant system Chip conveyor Horizontal milling spindle Vertical milling spindle Separate control cabinet Safety emergency stop Important note: The machine vice, if visible in the pictures, is not included in the scope of sale and delivery!

Condition: used, Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, travel distance X-axis: 7,800 mm, travel distance Y-axis: 3,300 mm, travel distance Z-axis: 900 mm, table width: 2,500 mm, table load: 16,000 kg, table length: 6,000 mm, table height: 500 mm, total height: 3,300 mm, total width: 5,000 mm, total length: 7,800 mm, type of input current: three-phase, rotational speed (max.): 3,000 rpm, workpiece weight (max.): 16,000 kg, overall weight: 60,000 kg, quill diameter: 150 mm, year of last overhaul: 2015, input voltage: 380 V, We offer this used Titan AFL bed type milling machine, year of construction 2015. Manufacturer: Titan Model: AFL Year of manufacture: 2015 Dwedpozxc Ifsfx Ai Eed Condition: used Category ID: 1170 Type ID: 2584 Machine type: bed type milling machine If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2018, operating hours: 500 h, functionality: fully functional, LAGUN BM4RT Bed Milling Machine Manufacturer: Lagun Type: BM4RT Year of manufacture: 2018 Dodpfx Aezmpydei Eswd Condition: operational, used, like new Operating hours: 1650 h Spindle hours: 438 h Control system: Heidenhain iTNC 640 Video available. Further information upon request.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 11676-FBZ, travel distance X-axis: 4,000 mm, travel distance Y-axis: 935 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, controller manufacturer: Heidenhain, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 3 Travel range X-axis: 4,000 mm Travel range Y-axis: 935 mm Travel range Z-axis: 1,000 mm Table length: 4,500 mm Table width: 800 mm Tool holder: ISO 50 Spindle speed: max. 3,000 rpm Milling head: Rotatable Dwsds Aidwaspfx Ai Esd MACHINE DETAILS Control system: CNC Control: Heidenhain Dimensions & Weight Dimensions (L x W x H): 8,000 x 3,200 x 3,000 mm Machine weight: 26,000 kg Transport packages: 1 EQUIPMENT Rotatable milling head Documentation Accessories CE marking

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Dsdpfx Aiszrd Tvs Eewd

Condition: like new (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, position of the milling head: 0.001, spindle speed (max.): 4,000 rpm, table width: 1,500 mm, table load: 10,000 kg, table length: 1,500 mm, type of input current: three-phase, workpiece weight (max.): 10,000 kg, overall weight: 26,000 kg, input voltage: 400 V, CNC MILLING MACHINE LAGUN GORATU GTM 3 (TYPE T) TECHNICAL SPECIFICATIONS Brand: Lagun (Goratu) Model: GTM 3 Year: 2016 CNC: Heidenhain iTNC 530 Table: 1500 x 1500 mm X: 3000 mm Y: 1200 mm Dwodpfx Aoy T Sffei Eed Z: 1500 mm V (Column cross travel: 1000 mm Automatic micrometer head - ISO 50 Head speed: 4,000 rpm Micrometer rotary table (capacity 10 tons) Internal coolant system: 40 Bar Head power: 28/34.5 Kw Chip filter ZF Gearbox PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEARING MACHINE, FOLDING MACHINE)

Condition: excellent (used), Year of construction: 2013, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table length: 4,800 mm, total height: 3,625 mm, total width: 4,900 mm, total length: 13,150 mm, workpiece weight (max.): 10,000 kg, overall weight: 26,000 kg, spindle motor power: 24,000 W, The CORREA NORMA 45 is a high-quality, heavy-duty CNC bed-type milling machine manufactured in Spain by Nicolás Correa, a well-established European manufacturer of large industrial milling machines. The machine is designed for precision machining of medium to large components, combining powerful milling capabilities, high rigidity and excellent accuracy. Manufactured in 2013 and equipped with the proven HEIDENHAIN iTNC 530 CNC control, this machine offers a reliable solution for companies requiring flexibility, precision and productivity. General engineering and subcontract machining companies: Machining large, complex components in small and medium production batches. Mould and die manufacturers: Machining large mould bases, tooling plates and precision components. Machine builders: Manufacturing machine frames, structural components, guideways and mechanical assemblies. Energy and power generation industries: Machining components for turbines, generators and industrial equipment. Steel fabrication and heavy engineering companies: Precision milling, drilling, boring and finishing of welded steel structures. Repair and maintenance workshops: Refurbishment and machining of large industrial components. Main advantages The CORREA NORMA 45 offers an attractive combination of European build quality, rigid machine construction and versatile CNC machining capabilities. The HEIDENHAIN iTNC 530 is particularly appreciated by experienced machinists for its conversational programming, reliable operation and suitability for complex milling operations. This machine is particularly attractive to subcontract machining companies, machine builders and manufacturers of large welded structures requiring accurate machining over a 4.5-metre working length. 3D measuing probe ( prepared) UGA-2C Universal Automatic head 2.5 x 2.5 Degrees Torq spil 840 Nm  HR 550 Handwheel Double chip conveyor Closed housing with HYPATIA 60 positions X-Axis: 4500mm Y-Axis: 1250mm Z-Axis: 1500mm Table Length: 4800mm Table Width: 1000mm Table load: 10 Power on spindle: 24kW Spindle speeds: 4000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Millinghead auto-index:2,5 x 2,5° Working hours: 12899H Length: 13150mm Width: 4900mm Height: 3625mm Weight: 26000kg Dwjdpe Agfhuefx Ai Eed Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, travel distance X-axis: 12,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, MECOF CS 50 CNC Universal Milling SELCA S3045L, Built 1997, Two axis Head C-Axes 360° x A-Axes 3° Bed 13,300 x 1,090 mm. X, Column travel 12,000 mm Y, Headstock vertical travel 1,800 mm Z, Frame 390 x 390 mm, stroke 1,000 mm Bed 13,300 x 1,090 mm Two axis Head C-Axes 360° x A-Axes 3° Spindle taper ISO 50 Spindle speed 10 - 4,500 rpm Spindle motor 20 kW Djdswdm U Nopfx Ai Eewd Automatic tool changer 41 Tools

Condition: good (used), Year of construction: 1991, Table 1,800 x 400mm, X 1,200, Y 505, Z 480mm, 44-1,320 Rpm, ISO 50. DRO, Dsdpfxjy S T Sqo Ai Eewd

Condition: used, Year of construction: 1980, functionality: limited functionality, machine/vehicle number: 4119, travel distance X-axis: 1,450 mm, travel distance Y-axis: 365 mm, travel distance Z-axis: 415 mm, total width: 3,400 mm, total length: 4,200 mm, overall weight: 3,500 kg, Last major overhaul in 2006 Swiveling spindle head, 360° Control: Digital display Clamping area: 1800 x 400 mm Table load: 1000 kg Travel in the longitudinal direction: 1450 mm Travel in the transverse direction: 365 mm Travel in the vertical direction: 415 mm Dwjdpfxoz Nfbzj Ai Esd Spindle connection: SK40 Spindle speed: 31.5-45-63-90-125-180-250-355-500-710-1000-1400 rpm Feed rate in the longitudinal direction: 8-1200 mm/min Feed rate in the transverse direction: 8-1200 mm/min Feed rate in the vertical direction: 4-600 mm/min Spindle drive: 7.5 kW Feed motor: 3.2 kW Coolant pump: 0.18 kW Hydraulic system: 0.37 kW Total connected load: 12 kVA Weight, approx.: 3500 kg Space requirement, approx. (L x W): 4200 x 3400 mm Technical data subject to change without notice. Errors and prior sale excepted.

Condition: used, Year of construction: 1933, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,259 mm, travel distance Z-axis: 1,500 mm, table length: 1,250 mm, table width: 1,400 mm, overall weight: 10,500 kg, x-travel 1600 mm y-travel 1259 mm z-travel 1500 mm tool adaptor SK 50 weight 10,5 t Dwjdpfx Aiez Aun Ss Eed output 49 kw feed 6000 m/min control Heidenhein 151 1600 min table: 1250-1400 mm serial number 1933 weight of the machine ca. 10,5 t

Condition: used, Year of construction: 1997, functionality: fully functional, total height: 4,000 mm, total width: 5,000 mm, total length: 5,000 mm, overall weight: 16,000 kg, ANAYAK FBZ-HV-2000 – CNC Bed Milling Machine Manufacturer: ANAYAK – Industrias Anayak S.A., Spain Model: FBZ-HV-2000 Machine Type: CNC Bed Milling Machine / Universal Bed Milling Machine Year of Manufacture: 1997 Condition: Used Technical Data • Travel X: 2,000 mm • Travel Y: 935 mm • Travel Z: 1,000 mm • Table Dimensions: 900x • Spindle Taper: ISO 50 • Spindle Speed: 60 - 3000 rpm • Control System: CNC Control HEIDENHAIN TNC 426 • Feed Rate X/Y/Z: 1 - 3000 mm/min • Rapid Traverse: 10 m/min • Universal Milling Head: Yes • Coolant System: Yes • Chip Conveyor: Yes • Electrical Connection: 50 kW • Machine Weight: 16,000 kg Documentation available ANAYAK FBZ-HV-2000 CNC Bed Milling Machine, year of manufacture 1997. Working area X 2,000 mm. Inspection possible by appointment. Dedpfx Aiez Epz Ao Eswd Sale from current location.

Condition: used, Year of construction: 1965, Dimensions (L/W/H) 10460,0 × 5715,0 × 5537 mm spindle head adjustment horizontal 3160 mm spindle head adjustment vertikal 1000 mm Dwedpfx Aieuh E Tbs Eed hobbing length 2250 mm weight of the machine ca. ca. 76660 kg t

Condition: used, Year of construction: 1990, functionality: fully functional, Table dimensions: 1000 x 1200 mm Max. table load: 3000 kg Spindle diameter: 90 mm Tool changer: manual Taper: MT5 (Morse Taper 5) "X" travel: 1000 mm Dedpfe Ah Ti Tex Ai Eewd "Y" travel: 1000 mm "Z" travel: 1600 mm Table rotation: 0-360 degrees Electric power: 23 kW Maximum table load: 30,000 N Machine weight: 9700 kg Dimensions (L x W x H): 8000 x 4000 x 3000 mm Accessories, Equipment - 3-axis DRO (Digital Readout) system - Complete documentation - Various tools The machine is fully functional but no longer in production. It has been professionally dismantled.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Well-maintained CNC bed-type milling machine, subject to regular maintenance and servicing by a specialist company. The machine can be inspected under power and in operation (cutting). CNC Control: Heidenhain TNC 426 (6-axis) [Travel Ranges] X-axis: 1.704 mm (longitudinal) Y-axis: 1.210 mm (transverse) Z-axis: 1.003 mm (vertical) Spindle speeds: 35 – 3.000 rpm Number of gear stages: 2 Tool taper: SK 50 Main motor power: 28 kW Feed rates: 6 – 5.000 mm/min Rapid traverse: 15.000 mm/min Table clamping surface: 2.000 x 800 mm Table load capacity: 6.000 kg [Tool Changer] Max. tool diameter: 125/250 mm Max. tool length: 300 mm Max. tool weight: 25 kg Dsdpfx As Af Uycsi Eewd Total power consumption: 65 kVA Machine weight: 16.000 kg Equipment: Automatic, infinitely variable 2-axis universal milling head NC rotary table (dividing head) with tailstock 30-station tool changer Chip conveyor Coolant system with internal coolant supply (ICS) Electronic handwheel 3D touch probe Machine enclosure Operating manual Machine without clamping units, tools and holder.

Condition: ready for operation (used), Year of construction: 1984, travel distance X-axis: 1,650 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, overall weight: 7,000 kg, Heidenhain 3-axis control system Variable speed drive for continuous feed Table size: 2000 x 700 mm Travel: 1650 x 1000 x 1000 mm Maximum spindle speed: 2066 rpm External electrical cabinet Dwsdpfx Aiszx Em De Esd Automatic lubrication Weight: 8000 kg

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 17,000 mm, travel distance Y-axis: 4,800 mm, travel distance Z-axis: 1,500 mm, table length: 16,000 mm, table width: 3,000 mm, spindle speed (max.): 3,000 rpm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, distance between stands: 3,800 mm, type of input current: three-phase, position of the milling head: vertikal / Winkelkopf, rotational speed (max.): 3,000 rpm, distance table to spindle center: 2,300 mm, overall weight: 90,000 kg, spindle nose: ISO 60 / ISO 50 Adapter, spindle motor power: 60,000 W, Equipment: rotational speed infinitely variable, ➡️ WALDRICH COBURG CNC GANTRY MILLING MACHINE ⬅️ Heavy Duty Machining | Siemens 840D Retrofit | Ready for Production High-quality CNC gantry milling machine manufactured by Waldrich Coburg available for sale in very good condition. ✔ Machine under power ✔ Inspection & test run possible ✔ Siemens 840D retrofit (2013) ✔ New electrical system & cabinets ✔ New motors & drives ✔ Heidenhain glass scales on all axes ✔ Ideal for large part machining & heavy-duty applications Technical Data X travel: 17,000 mm Y travel: 4,800 mm Z travel: 1,500 mm Floor plates: 16,000 x 3,000 mm Distance between columns: 3,800 mm Distance table to spindle face: 2,300 mm Spindle power: 60 kW Spindle speed: 0.4 – 3,000 rpm Tool taper: ISO 60 / ISO 50 adapter Machine weight: approx. 90,000 kg Equipment Siemens 840D CNC control 2-step gearbox Right angle head WFU 250 with automatic indexing Right angle head WFU 500 with automatic indexing Rapid tapping Tool trolley with tool holders Steel way covers on X/Y axes 2 chip conveyors Perfect for: Heavy machining Machine building Energy industry Dwodpsy Rrb Isfx Ai Eod Shipbuilding Steel & rolling mill industry Subcontract manufacturing 📍 Location: USA 🌍 Worldwide shipping can be arranged 📞 Please contact us for more information, videos, or inspection appointments.

Condition: used, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 760 mm, table width: 2,000 mm, Sachman Model R Table size 2000 x 560 Travel: X 1600 Y 700 Z 760 Dsdpjwtfvqefx Ai Eswd

Condition: ready for operation (used), functionality: fully functional, Zayer milling machine, model 60BM, with a table of 2030mm x 700mm, featuring a dimension display, and a motorized ram. Longitudinal travel: 1,524 mm, ram travel: 712 mm, vertical travel: 560 mm, ISO 50, speeds: 24-1685 rpm, spindle motor power: 15 hp. The machine has been inspected. Approximate machine weight: 6,500 kg, in good condition. Dedpfxszmp Inj Ai Eowd

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, The Zayer ZF1700 is a CNC milling machine designed for machining workpieces, equipped with a Heidenhain control system. The Zayer ZF1700 features a working area of X: 1,420 mm, Y: 880 mm, Z: 650 mm, a maximum spindle speed of 3,000 rpm, and a weight of approximately 9,000 kg. Main technical specifications: Machine type: CNC milling machine. Control: Heidenhain TNC 150. Working area (X/Y/Z): 1,420 mm / 880 mm / 650 mm. Spindle speed: Up to 3,000 rpm. Weight: Approx. 9,000 kg. Dwodpfxew Tq A Ie Ai Esd Dimensions (W/D/H): 3,557 mm / 5,200 mm / 2,750 mm.

Condition: used, Year of construction: 1999, functionality: fully functional, x-travel 4500 mm Dwedpfxowhqyqo Ai Eed y-travel 2000 mm z-travel 1200 mm spindle taper ISO 50 Cube 2 weight of the machine ca. 20.000 t

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Horizontal boring and milling machine with a cross-bed design Brand: UNION / Type: KR150 / Year of manufacture: 2014 The machine can be inspected under power by prior appointment. In good working order / ready for use. Operating hours (September 2026): - Control on: 39.742 h - Machine on: 33.941 h - Program run: 12.260 h TECHNICAL SPECIFICATIONS: WORKING AREA Travels: - X-axis (Cross slide): 3.200 mm - Y-axis (Headstock): 2.500 mm - Z-axis (Support beam): 1.000 mm - V-axis (Column slide, integrated into the control system): 1.500 mm - W-axis (Spindle): 700 mm - B-axis (Rotary table): 360° The RAM is hydraulically balanced/compensated by the control system. Spindle: - Spindle diameter: 150 mm - Rotational speed max.: 3.000 rpm - Tool holder: SK50 - Automatic tool clamping Dimensions of the rotary table: - Clamping surface: 1.800 x 2.000 mm - Max. workpiece weight: 25 tons EQUIPMENT: - CNC control: Heidenhain iTNC 530 - Universal milling head UC-U40 Dedpfx Asz Evgloi Eswd - Internal and external coolant supply - Coolant lubrication system - Chip conveyor - Touch probe workpiece measurement There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 2,500 rpm, Heidenhain TNC 407 control unit Table: 2000 x 700 mm Travel: 2000 x 800 x 800 mm Dedpfszbrkpsx Ai Eowd Spindle: SA 50 Maximum spindle speed: 2500 rpm Weight: 10000 kg