Used Planer Type Milling Machine for sale (109,062)

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs Csdpjh U Nvksfx Ah Ueri RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: excellent (used), Year of construction: 1994, operating hours: 1,930 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 4,200 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total length: 15,000 mm, table length: 5,000 mm, total width: 15,000 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 4,000 rpm, total height: 7,500 mm, table height: 1,350 mm, distance between stands: 3,500 mm, type of input current: AC, table load: 65,000 kg, workpiece weight (max.): 65,000 kg, distance table center to spindle nose: 2,300 mm, overall weight: 210,000 kg, spindle motor power: 50,000 W, MACHINE DATA Machine type: Portal milling machine - double column for continuous 5 axis operation Manufacturer: WALDRICH COBURG Model: 15 S - 10 FPF 300 NC Year of construction: 1994 Condition: Fully refurbished 2015 Functionality: fully functional Operating hours: 1,931 h TECHNICAL DETAILS Number of controlled axes: 5 travel distance X-axis: 7,200 mm Credpovv N I Rofx Ah Uei travel distance Y-axis: 4,200 mm travel distance Z-axis: 1,750 mm spindle speed (max.): 4,000 rpm working width: 3,500 mm PROVISION Machine location: Ljubljana, Slovenia Availability: now Delivery conditions: FCA Pick up at location: Ljubljana Shipping costs: upon request Planer-milling machine - double column: completely overhauled in 2014 / 2015 by Waldrich Coburg (basically everything except the casting): > New control unit > New cables > New motors > New electrics > Guideways overhauled DESCRIPTION - Heavy double-column machine for processing complex shapes - 2 pallet stations with 2 pallets (load capacity 65t each) - Machine with CNC control SIEMENS 840D sl - In 2014, conversion of the control system to SIEMENS 840D sl (incl. complete cabling and control cabinet) - in 2015 replacement of all axis motors - Various angle milling heads - NC-controlled milling head with 50 kW milling power / clamping 2.5° each with Hirth serration (type USP300C450F15S) - 2-axis NC-controlled fork head with 40 kW milling power (type UFN00SZ500) - Automatic tool changer for 76 tools (ISO 50 and 60) TECHNICAL DETAILS Travel X / Y / Z: 7,200 / 4,200 / 1,750 mm Milling width: 3,500 mm Distance spindle nose to table: 2,300 mm Milling power: 50 kW Speed: 10 - 4,000 rpm Front spindle diameter: 150 mm Spindle holder: ISO 60, ISO50 Control: Siemens 840D sl Pallet size: 3,000 x 5,000 mm Pallet load: max. 65 t Number of pallets: 2 pieces Tool changer: 76 slots Feed rate: 10 - 15,000 mm/min MACHINE DETAILS Pick-up power: 92 kW Weight: 210 t Spindle hours: 1,931 h Switch-on time: 7,870 h Bed dimensions: 12.5 x 2.3 x 0.78 m; 28.5 t Pallet dimensions: 5.35 x 3.0 x 0.4 m; 22 t Main pallet carrier dimensions: 5.1 x 2.9 x 0.5 m; 25 t Dimensions of bed section: 3.8 x 2.9 x 0.5 m; 10 t Milling spindle box dimensions: 4.1 x 1.9 x 1.5 m; 13.5 t Left/right column dimensions: 4.1 x 1.3 x 1.7 m; 10.5 t Exhaust air slide dimensions: 8.5 x 0.7 x 1.2 m; 1.1 t Control cabinet dimensions: 7.9 x 0.6 x 2.1 m; 2.8t THIS IS A TOP CLASS MACHINE FOR MOST ACCURATE WORK; HIGHLY EFFECTIVE. MACHINE IS ASSEMBLED AND UNDER POWER:

Condition: ready for operation (used), Butler Planer With Flott linisher attachment Vast amount of planning tools 6000mm x 2440mm table 3000mm between columns 2440mm under the bridge (vertical) Crodpfowwk Rbsx Ah Usi New electrics and motor

Condition: used, Year of construction: 1986, longitudinal travel 1200 mm vertical movement 600 mm cross travel 450 mm table-size 1500 x 600 mm max. table load 2 t spindle taper ISO 50 spindle drive 15 kW speeds 6 - 4000 U/min Cjdexukppopfx Ah Usri feeds 2 - 2500 mm/min rapid traverse 10 m/min voltage 400 V Bed milling machine with swivable spindle to horizontal or vertical. Control: Heidenhain TNC 155. Machine has an additional horizontal 4th axe.

Condition: like new (used), Year of construction: 2007, Retrofitted: 2024 Csdpfeugbn Ejx Ah Usri Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): -10 / 990 mmDistance between columns: 2435 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10975 x 4768 x 5095 mm Accesories GuardingAutomatic tool changer: ATC30Coolant: External internal high pressure through spindleElectronic handwheel: HR-410 Sales conditions Guarantee: 6 months mechanical spare partsSale price (Ex Work): On request View all technical features

Year of construction: 2000, operating hours: 25,616 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC430 B Main Drive Number of axis 3 Movement X-Axis Movement 3000 mm Y-Axis Movement 1400 mm Z-Axis Movement 1500 mm Crodpfxexuaydo Ah Usi This 3-axis SACHMAN T22 HS was manufactured in 2000 and features a Heidenhain TNC 430 B digital control, a 20-fold tool changer SK 50, and a table size of 3,000 x 1,400 mm. It includes an adaptable high-speed spindle capable of 30,000 rpm and a travel range of X=3,000, Y=1,400, Z=1,500 mm. Consider the opportunity to buy this SACHMAN T22 HS Bed Type Milling Machine. Contact us for more information about this machine. Application Types Milling

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min Credpfx Ahjvkit Ae Uoi feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and ls the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: excellent (used), Used TOS metal milling machine, model FNK 25. The machine is in good technical condition and ready for operation. It is equipped with numerous functions that enable precise machining of various materials. This milling machine is a solid choice for workshops or hobbyists seeking a reliable tool for metalworking. Loading of the machine on site is provided. Csdpfxsxfwkzj Ah Uori Table: 1250 x 250 mm - Working travels: - X axis: 800 mm - Y axis: 350 mm - Z axis: 420 mm - Spindle taper: ISO - 40 - Spindle speed range: 56 – 4,500 rpm - Maximum workpiece weight: 200 kg - Motor power: 3.5 kW - Dimensions (L x W x H): 2650 x 1980 x 2260 mm - Machine weight: 1,760 kg

Condition: used, Year of construction: 1988, control Heidenhain 355 tool adaptor SK50 Credpfxjf Tdvbs Ah Uei weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, USED KIHEUNG POINT U6 WITH HEIDENHAIN TNC POINT TO POINT CONTROL SERIAL NUMBER 3190597 YEAR 1999 MACHINE DELIVERY / AVAILABILITY - Ex Stock - Subject to Prior Sale. Credevrzv Eepfx Ah Uoi MACHINE CONSTRUCTION & FEATURES  TRAVELLING TABLE CNC MILLING MACHINE WITH UNIVERSAL MANUAL INDEXING HEAD  HEAVY-DUTY CAST-IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HEAVY DUTY CAST IRON CONTRUCTION WITH SOLID SLIDEWAYS  LINEAR SCALES. ADDITIONAL INCLUDED ACCESSORIES, OPTIONS & TOOLHOLDERS  COOLANT EQUIPMENT  MACHINE TABLE GUARDING INCLUDED. FIXED TABLE Working Surface 2,200 x 550 MM Tee Slot Configuration 5 T-SLOTS X 20H12 TRAVELS Longitudinal Column Travel (X-Axis) 1,600 MM Vertical Head Travel (Y-Axis) 900 MM Cross Travel (Z-Axis) 700 MM SPINDLE HEAD Spindle Nose Taper ISO 50 Spindle Speeds - 2 Ranges 40-1600 RPM Spindle Motor Power 11.0 KW SLIDE FEEDS Cutting Feedrate 2000 (LONG AND CROSS), 1000 (VERT) MM / MIN Rapid Traverse (X, Y-Axis) 5 M/MIN Rapid Traverse (Z-Axis) 2.5 M/MIN Rapid Traverse (Z-Axis) 15 M/MIN POWER SUPPLY Voltage 415V / 50HZ / 3PH MACHINE Floor Space 4,750 x 2,720 MM Height 3,050 MM Weight 8,000 KGS

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Csdpfxou T S Dwe Ah Ujri Technical features Dimensions Table dimensions: 5600 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmVertical capacity (VC): 450 / 1450 mmDistance between columns: 2700 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 25000 kgMachine weight approximate: 56000 KgMachine dimensions approximate: 13200 x 5425 x 5350 mm Accesories Guarding: 2 sliding doors with a perimetral wire-mesh fenceAutomatic tool changer: OptionalChip conveyor: 1 transversal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsSale price (Ex Work): On request View all technical features

Year of construction: 2002, operating hours: 45,709 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC 430B Movement X-Axis Movement 3000 mm Y-Axis Movement 1600 mm Z-Axis Movement 1500 mm This 6-axis SACHMAN TRT 314 HS was manufactured in 2002 and features a 40-position SK 50 tool changer, internal coolant supply, and a 2-position pallet changer. It boasts a table size of 2,000 x 2,000 mm and an adaptable high-speed spindle reaching 30,000 rpm. Control is managed via Heidenhain TNC 430 B digitised. If you are looking to get high quality milling capabilities consider the SACHMAN TRT 314 HS machine we have for sale. Contact us for more information. Application Types Milling Crsdpjxuaykefx Ah Uoi

Condition: new, Year of construction: 2025, neu 2025 030138 prompt, Zwischenverkauf v Deutschland 3360.75 € 1 13 mm MK 2 220 mm 40 - 4000 U/min 0,54 (230 V, frequenzgere kW M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Credpfx Aoxcbhrjh Usi Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: used, x-axis / mm y-axis / mm z-axis / mm The boring mill is sold without clamping plates – the price refers exclusively to the boring mill. Technical data Horizontal milling and drilling machine with support sleeve Working range Vertical adjustment of the headstock from the clamping surface: 0 - 3000 mm Horizontal adjustment of the column: 7000 mm Maximum drilling depth with drill spindle alone: 1200 mm Maximum drilling depth with drill spindle and support sleeve together: 1300 mm Drill spindle diameter: 150 mm Milling spindle diameter: 240 mm Support sleeve diameter: 390 mm Support sleeve extension: 700 mm Drill spindle tool holder: ISO 50 Maximum workpiece weight: 70,000 kg When placed in 4 prisms: 95,000 kg Main drive Total speed range, adjustable from 2 - 795 rpm Series 1 2 - 50.4 rpm Series 2 50.4 - 126 rpm Series 3 126 - 314 rpm Series 4 314 - 795 rpm Maximum drive power at rated speed 17.5 80 kW Quick adjustment speed of spindle box and column 1800 mm/min Rapid adjustment speed of drill spindle and support sleeve 1400 mm/min Fine adjustment speed of spindle box and column medium 75 mm/min Fine 3 mm/min Fine adjustment speed of drill spindle and support sleeve Medium 57.7 mm/min Fine 2.5 mm/min Feed of headstock and column for milling Row 1 3 - 75 mm/min Row 2 72 - 1800 mm/min Feed of drill spindle for drilling Row 1 0.19 - 4.7 mm/min Row 2 2.2 - 56 mm/min Row 3 56 - 1400 mm/min Special equipment Numerical length measuring device in horizontal and vertical directions Accuracy 0.01 mm Rotatable and movable clamping table, Collet & Engelhard, Offenbach Model Tdvmf 1.6 (for technical data, see ‘Clamping table’) Rotatable and movable clamping table from Scharmann, Rheydt Model DAV 1600 Rotatable and movable clamping table from Froriep, Rheydt Swivel crane for tool change, maximum load capacity 500 kg Special tools Carbide core drill bits for extracting core samples Universal facing and boring head from Wohlhaupter, Frickenhausen Model UPA7, with the following specifications: 1 division of the fine adjustment 0.01 mm in diameter 1 revolution of the fine adjustment 0.5 mm in diameter Facing and boring range 0 - 1250 mm Maximum slide adjustment 210 mm Codpfexdnraox Ah Usri Automatic slide feed in mm/rev during facing 0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 - Quick adjustment per revolution of the quick adjustment spindle 6 mm in diameter Largest diameter of the slide at zero position corresponds to the smallest drilling diameter of 323 mm Head height without shaft 260 mm

Condition: used, Year of construction: 1999, x-travel 4500 mm y-travel 2000 mm z-travel 1200 mm spindle taper ISO 50 Cube 2 weight of the machine ca. 20.000 t Cjdswhqyqepfx Ah Ujri

Condition: like new (used), Year of construction: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Control HEIDENHAIN TNC 640 c-axis +-360 ° milling head -swivable ° milling head swivable ca. +-360 ° table dimension - longitudinal 2500 mm table dimension - cross 3500 mm table load 6 t/m² coolant IKZ 70 bar Feed speed 60 m/min. spindle turning speed range 24000 U/min tool taper HSK-A63 milling spindle motor S6 (40% / 2 min) 41 kW max. torque on the spindle S6 (40% / 2 min) 49 Nm Crsdpfovwgtysx Ah Usi milling spindle motor S1 (100% / 2 min) 34 kW max. torque on the spindle S1 (100% / 2 min) 39 kW tool change unit 60 Pos. weight of the machine ca. 74 t dimensions of the machine ca. 4 x 7.5 x 5.4 m This thermosymmetrical, ergonomic, universal ZIMMERMANN FZU32 portal milling machine is in mint condition and available immediately. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining aluminium machining of aluminium, fibre composites, plastics, ureol and steel. steel. Thanks to the particularly rigid, newly developed centre-guiding gantry, we can meet the increasing requirements in model, tool and mould making. mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions.

Condition: good (used), Year of construction: 2011, Auerbach FBE 3000, Year of manufacture: 2011, Control: Siemens 840 D Powerline, Travel X/Y/Z: 3000/865/900 mm, 24-position tool changer, SK 50, Multi-position milling head KFM 1, Crsdpfoxu Ebmex Ah Uji Chip conveyor, Internal and external tool cooling, External air cooling, High-pressure through-spindle coolant 30 bar (IKZ), 3D probing system, Belt filter unit, Direct measuring systems, Full enclosure with roof, Oil mist extraction system, Roof opening for crane loading,

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Bed Type Milling Machine Lagun GBR 42 Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel ranges: X: 4000 mm Y: 1200 mm Z: 1000 mm Crjdpfxoxp Nxls Ah Uoi Spindle speed (max.): 4,200 rpm Tool holder SK50 DIN 69871 Internally cooled tools with 20 bar Table load capacity: 10,000 kg Swivel head: 45° diagonal milling head with 2.5° increments Tool changer: Drum-type changer with 24 tool positions (vertical tool change) Machine enclosure: Front cover with 2 doors, rear cover with additional door, lateral louvres for machining of extra-long workpieces Chip conveyor in longitudinal direction (discharge to the right) Control cabinet air conditioning Swivel arm for machine control (operation at front and rear) Can be inspected under power. Available immediately.

Condition: used, Year of construction: 1990, x-travel 1600 mm Credjwlvtdepfx Ah Uoi ja weight of the machine ca. 13,7 t

Condition: used, Year of construction: 2000, x-travel 4300 mm y-travel 1000 mm z-travel 1700 mm Control TNC430 Crodpfxjww Ngus Ah Usi ja

Condition: used, Year of construction: 1990, x-travel 1100 mm y-travel 600 mm Crjdpfx Ajwf Etyoh Uoi z-travel 600 mm Control Heidenhain 355 weight max. 10 t head swivability ja ° ja table length 1200 mm table width 550 mm serial number A12055

Condition: used, Year of construction: 1999, x-travel 1900 mm y-travel 800 mm z-travel 800 mm control 426 Heidenhain weight of the machine ca. 12 t Credpferpa N Ijx Ah Uji

Condition: used, Year of construction: 1965, Dimensions (L/W/H) 10460,0 × 5715,0 × 5537 mm spindle head adjustment horizontal 3160 mm spindle head adjustment vertikal 1000 mm hobbing length 2250 mm weight of the machine ca. ca. 76660 kg t Crsdpfx Ahsuh E Tbj Usi

Condition: used, Year of construction: 1979, spindle diameter 80 mm ja facing slide ja Credpswhq Dvefx Ah Uei Ja weight of the machine ca. 8,8 t

Condition: used, Year of construction: 2015, Axis 3 Axis 4. Aufetzachse Cjdpfx Ahewlvryj Usri ja weight of the machine ca. 8,5 t