Used Fp2 for sale (128)

Condition: new, centre height // mm total power requirement / kW Hnsdpfjzcgfqjx Ahlsr weight of the machine ca. / t required space / m Parts machine for lids FP1 / FP2 Condition: NEW

Condition: used, power capacity / kW volt / V ampere / A DECKEL MONITOR Bildschirm DIALOG FP2 / FP3 Hnedpfxoy S Eb Re Ahlor

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Hnsdpfx Ajwid Spehljr Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: used, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 11 turning speed range - main spindle 40 - 4000 min/-1 tool taper SK 40 swivellable +/- 90 ° Hnedpfx Ahezq Hlfeler quill stroke 80 mm In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Accessories: - Cabin Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: used, Sheet metal cabinet with hinged door, LID Original lid for the accessory cabinet Hsdpoznn Hxsfx Ahljnr Lid for FP1 / FP2 / FP3 with 2 sliding shelves without contents Length: 1000 mm Width: 750 mm Height: 960 mm

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Length (bearing block): 133 mm Hnodpfx Ahexcbl Dolsr Width (bearing block): 50 mm Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Very good condition

Condition: good (used), Year of construction: 1975, Deckel FP2 – 3-axis milling machine with Fagor digital display. The machine is in good condition and comes from a training department. It features a universal swivel rotary table and an SK 40 spindle mount. Accessories include various collets and milling arbors. Good, operational condition. Can be demonstrated under power by arrangement. Hnedpfx Aezruudehljr

Condition: ready for operation (used), machine/vehicle number: 46436, Travel distances: Hnjdpfx Asygia Eehlsr longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm Features: - Sliding vertical milling head - Tilting angle table 260 x 600 mm - Various tool holders - Setup elements - Rotary table D:280 mm - Documentation Condition: workshop-tested

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9585, DECKEL Universal Milling and Drilling Machine Model: FP 2 Machine No.: 9585 Year of manufacture: 1978/79 Condition: Good, operational condition Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm Hjdjygicaepfx Ahljnr

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, Dear Sir or Madam, We are offering a Deckel FP2 Aktiv for sale. This newer model stands out primarily due to its stepless speed control with Heidenhain Aktiv control, which makes operation very easy and extremely comfortable. The machine has been thoroughly inspected in our workshop and is in very good condition. You are welcome to inspect it on-site. Delivery time: Available immediately Machine no. 2202-xxxx Table: fixed angular table or swivel-tilt table Travel: X400mm/Y220mm/Z400mm Drive power: 3KW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: Stepless Equipment and accessories: 3-axis digital display Heidenhain, stepless feed control in all 3 axes, Heidenhain digital display with Aktiv control, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly inspected Hjdpfx Aszldnajhlenr - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the machine of your choice - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We will gladly take care of shipping and/or installation

Condition: used, x-travel 800 mm y-travel 400 mm z-travel 300 mm digital readout Heidenhain table surface area 1000 x 520 mm turning speed range 40 x 2000 U/min spindle taper SK 40 total power requirement 2,2 kW Hjdpfxoqpl Uuj Ahlonr weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofitted tool milling machine with a 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. It features a fixed table, electrically interlocked milling head guard, and an SK 40 spindle mount. Accessories include various collets and milling arbors. It is in good, operational condition. A demonstration under power can be arranged. Hnodezac Sbjpfx Ahlor

Year of construction: 1990, condition: good (used), Various collet chucks and holders, approximately 300 pieces. Hnsdehvz Iiepfx Ahlor For DECKEL milling machines FP1 - FP2 - FP3 - FP4 Individual sales upon request.

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital display, the machine is in good condition. Rigid table, SK 40 spindle taper, accessories: various collets and arbor holders, counterholder. Good, operational condition. Can be demonstrated under power by arrangement. Hedpfexbx R Usx Ahlenr

Condition: good (used), Year of construction: 1964, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 40 rpm, input frequency: 50 Hz, The machine is in good condition! Tool holder: SK 40 Travel ranges X/Y/Z: 500 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm Vertical spindle stroke: 60 mm Horizontal spindle stroke: 100 mm Feeds: 8 - 400 mm/min Table size: 700 x 300 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Space requirements L x W x H, approx.: 1200 x 1250 x 1670 mm Head swivels: 90° / 90° Equipment: - 3-axis digital display - Coolant system Hsdsilg H Espfx Ahljnr We would be happy to demonstrate the machine to you on site while it is running. All information is subject to change without notice. Subject to prior sale. The item is sold as is, with no warranty of any kind. This exclusion does not apply to claims for damages resulting from gross negligence or willful breach of the seller's obligations, or to any injury to life, limb, or health.

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Active – TNC 111 Digital Readout by Heidenhain, incl. Accessories, Excellent Condition Technical Data: >> Year of manufacture: 1979, Machine No. 2202-10512 >> Fixed angle table >> Spindle speeds: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable 150 mm on spindle carrier >> Vertical and horizontal quill – SK40 extendable >> Drawbar system M16 >> Weight approx. 1400 kg Equipment and Accessories: >> 3-axis TNC 111 Active digital readout by Heidenhain >> Coolant system >> Central lubrication >> 1 accessory cabinet containing: Collets, tool holders, clamping tools, tailstock, Dividing head with 3-jaw chuck, vise, tailstock, indexing plates, and much more Hnjdpfxoy H Ibco Ahler About the Machine: For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a state-operated laboratory where it saw only minimal use. It includes an accessory cabinet with a wide range of tools. The machine has very little backlash, and all spindles move smoothly. The geometry is outstanding. Even at maximum spindle speeds, the milling machine runs quietly. On this newer FP2 model, the feed on all three axes is continuously adjustable and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain digital control, set dimensions can be entered and the machine will automatically travel to these positions. An oil change has been carried out. The machine has been mechanically and electrically checked. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test the machine under power on site.

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, year of last overhaul: 2026, Dear Sir or Madam, We are offering for sale a Deckel FP2 Aktiv. This newer model is particularly notable for its infinitely variable spindle speed control with Heidenhain Aktiv control, making operation both very simple and extremely comfortable. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. Hnodpfsx Hr Dzjx Ahlsr Delivery time: on request Machine number: 2202-xxxx Table: Rigid angle table or rotary-tilting-swiveling table Travel (X/Y/Z): 400mm / 220mm / 400mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: Infinitely variable Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed adjustment on all 3 axes, Heidenhain digital readout with Aktiv control, coolant system, central lubrication, technical documentation, machine leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - On request, we can fully or partially overhaul the selected machine for you - If desired, you can order further accessories such as tools, etc. directly - If desired, we can install additional equipment such as safety devices, etc. directly - We are also happy to handle shipping and/or installation for you

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, year of last overhaul: 2026, Equipment: documentation/manual, Dear Sir or Madam, We are offering a partially overhauled Deckel FP2 for sale. This newer model stands out particularly due to its stepless speed control, which makes operation very easy and extremely comfortable. The machine has undergone an extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. --- Currently 3 units available for immediate delivery! --- Availability: 3x immediately Machine no.: 2202-xxxx Table: fixed angular table or rotary-tilt-swivel table Travel distances: X 400mm / Y 220mm / Z 400mm Drive power: 3kW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Drawbar thread: S20x2 Feed: stepless Equipment and accessories: Heidenhain 3-axis digital readout, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Hedpfx Aey Exayohlenr Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can fully or partially overhaul your selected machine - If desired, you can order additional accessories such as tools, etc. directly - If required, we can directly install further equipment such as safety devices - We are happy to arrange shipping and/or installation for you

Condition: excellent (used), Year of construction: 1979, Deckel FP2 Aktiv tool milling machine with 3-axis Heidenhain TNC 111 Aktiv digital readout. The machine is in very good condition and comes from a state training department. Fixed table, SK 40 spindle taper. Accessories: various collets and arbor holders, tailstock. Very good, ready-to-operate condition. Can be demonstrated under power by arrangement. Hjdpfx Ajxyhmvehlenr

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP2 in special paint finish light gray with 3-axis digital display K+C NEW Technical data: >> Machine no. 5983 Year of construction approx. 1975 >> Rigid angular table (newly revised) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2,2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital display K+C Newly assembled with manufacturer's warranty. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Operating instructions for digital display >> Coolant device To the machine : Hsdpfxsu I Rm Nj Ahlonr We offer a universal milling machine Deckel FP2 in good condition. The Deckel has very little crank play and all spindles can be moved easily. The machine has been completely dismantled and repainted. An oil change has been carried out. Mechanically and electrically tested. The digital display from K+C makes work easier and even more accurate. You also have a 1 year guarantee on the new digital display. Take the opportunity to inspect and try out the lids on site under power. The machine is available immediately.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Hodpfxjvbifgj Ahlonr Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Digital Readout Heidenhain, infinitely variable feed, in very good condition Technical Data: >> Year of manufacture: 1978 Machine No.: 2202-10163 >> Fixed angle table >> Spindle speeds: 25 - 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 3.0 kW Hodoxghtvepfx Ahlsnr >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quill - SK40, extendable >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and Equipment: >> 3-axis digital readout from Heidenhain >> Coolant system >> Mechanical central lubrication About the machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The FP2 has very little backlash, and all spindles move smoothly. The machine runs quietly even at maximum speeds. On this newer FP2 model, the feed rate is infinitely adjustable on all three axes, and each axis is equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and improves precision. You are welcome to view and test the machine under power at our facility.

Condition: excellent (used), feed length X-axis: 400 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, For sale is a conventional milling machine of the brand Deckel and type FP2 The machine is in very good condition, has been overhauled by the Harich company (date unknown) and is ready for immediate use Technical data Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Hnsdeu Ti Akjpfx Ahler Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Vice and tools are NOT included in the offer, but can be offered. On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 1968, condition: good (used), For sale is a Deckel milling machine from 1968. The machine is in good to very good condition and fully functional. (No digital display, but one can be additionally installed upon request.) Technical data: Tool holder: SK 40 Travel ranges X/Y/Z: 400 / 200 / 400 mm Spindle speed range: 40 - 2000 rpm Spindle travel, vertical: 60 mm Spindle travel, horizontal: 100 mm Feeds: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Hodpfxjihf Etj Ahljnr Connection: 400 V / 16 A plug Weight: approx. 1300 kg All prices plus VAT. Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Hnodpfx Ahsuuh Sueler Signs of use on surface recognizable on pictures Dimensions: 38*68 cm Height: 25 cm